RAD-L3SAT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
7
Rows
7
Columns
119
l3SatPeerProfileTable
table
.1.3.6.1.4.1.164.6.1.15.1.6
·
1 row entry
·
9 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatPeerProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatPeerProfileTable'
This table contains peer configuration profiles to be used in L3 SATs.
An entry in peer profile table.
A row cannot be deleted if the profile is associated to a peer.
A row cannot be modified if the profile is associated to a peer
that one or more of its test sessions are in p…
A row cannot be deleted if the profile is associated to a peer.
A row cannot be modified if the profile is associated to a peer
that one or more of its test sessions are in p…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A meaningful printable profile name.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.164.6.1.15.1.6.1.1 |
||||||||||||
|
This object enables creation and deletion of profiles.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.164.6.1.15.1.6.1.2 |
||||||||||||
|
The start of the range of UDP ports that are used in the tests.
Must be a multiple of 16. |
Unsigned32r/w Constraints: range: 0-65504 |
.1.3.6.1.4.1.164.6.1.15.1.6.1.3 |
||||||||||||
|
The scope of the test: configuration phase, performance phase, or
both phases. |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.1.6.1.4 |
||||||||||||
|
Allows to include or exclude the traffic policing sub-test from the
configuration phase. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.1.6.1.5 |
||||||||||||
|
The transmission rate in each step of the step load sub-test,
configurable as percentage of BW. The last transmission rate must be 100% BW therefore only up to 3 additional rates are configurable. Unused … |
OctetStringr/w Constraints: range: 4-4 |
.1.3.6.1.4.1.164.6.1.15.1.6.1.6 |
||||||||||||
|
The duration of the configuration phase.
This duration is used for each test session. |
secondsUnsigned32r/w Constraints: range: 60-300 |
.1.3.6.1.4.1.164.6.1.15.1.6.1.7 |
||||||||||||
|
The duration of the performance phase.
|
minutesUnsigned32r/w Constraints: range: 5-7200 |
.1.3.6.1.4.1.164.6.1.15.1.6.1.8 |
||||||||||||
|
Indicates which metrics are included in the report.
Based on this configuration, each metric in the l3SatReportTable is either valid or not as stated in the metric description. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.1.6.1.9 |
l3SatSessionProfileTable
table.1.3.6.1.4.1.164.6.1.15.1.7
·
1 row entry
·
8 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatSessionProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatSessionProfileTable'
This table contains test session configuration profiles to be used in L3 SATs.
An entry in test session profile table.
A row cannot be deleted if the profile is associated to a test
session.
A row cannot be modified if the profile is associated to a running
test session.
A row cannot be deleted if the profile is associated to a test
session.
A row cannot be modified if the profile is associated to a running
test session.
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A meaningful printable profile name.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.164.6.1.15.1.7.1.1 |
||||||||||||||||||
|
This object enables creation and deletion of profiles.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.164.6.1.15.1.7.1.2 |
||||||||||||||||||
|
The size of test packets.
Up to 4 different packet sizes shall be selected. This size refers only to the IP part (IP header + UDP header + payload) and does not include the Ethernet encapsulation. |
bytesRadTestIpSizeValuesr/w Type Values:
|
.1.3.6.1.4.1.164.6.1.15.1.7.1.3 |
||||||||||||||||||
|
A user configurable packet size to be used in the tests.
Relevant only when the ipCustomVal(8) bit is set at l3SatSessionProfileIpSize. |
bytesUnsigned32r/w Constraints: range: 52-2094 |
.1.3.6.1.4.1.164.6.1.15.1.7.1.4 |
||||||||||||||||||
|
The service acceptance criteria for round-trip Packet Loss Ratio.
|
ppmUnsigned32r/w Constraints: range: 0-1000000 |
.1.3.6.1.4.1.164.6.1.15.1.7.1.5 |
||||||||||||||||||
|
The service acceptance criteria for round-trip/one-way
Packet Transfer Delay. |
micro secondsUnsigned32r/w Constraints: range: 0-1000000 |
.1.3.6.1.4.1.164.6.1.15.1.7.1.6 |
||||||||||||||||||
|
The service acceptance criteria for round-trip/one-way
Packet Delay Variation. |
micro secondsUnsigned32r/w Constraints: range: 0-1000000 |
.1.3.6.1.4.1.164.6.1.15.1.7.1.7 |
||||||||||||||||||
|
The service acceptance criteria for round-trip Availability.
|
hundredth of percentUnsigned32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.164.6.1.15.1.7.1.8 |
l3SatGeneratorTable
table.1.3.6.1.4.1.164.6.1.15.2.11
·
1 row entry
·
14 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatGeneratorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatGeneratorTable'
This table contains a list of generator entities used in L3 SATs.
An entry in L3 SAT generator table.
A row cannot be modified when the RowStatus is active(1).
A row cannot be deleted while at least one of the test sessions is
running (indicated by l3SatGener…
A row cannot be modified when the RowStatus is active(1).
A row cannot be deleted while at least one of the test sessions is
running (indicated by l3SatGener…
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A meaningful printable generator name.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.1 |
||||||||||||||
|
This object enables creation and deletion of L3 SAT generators.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.164.6.1.15.2.11.1.2 |
||||||||||||||
|
The role of the generator device in the service path - L3 forwarder
or L2 probe. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.11.1.3 |
||||||||||||||
|
The associated physical or logical port.
This object is relevant only when l3SatGeneratorApplication is set to l3OverL2(2). |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.164.6.1.15.2.11.1.4 |
||||||||||||||
|
The outer VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no outer VLAN the value 4294967295 is used. This object is relevant only when l3SatGeneratorApplication is … |
Unsigned32r/w Constraints: range: 0-4095range: 4294967295-4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.5 |
||||||||||||||
|
The outer VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets. A value of 255 means the marking profile of l3SatGeneratorOuterMarkingProfile is used instead of this object. … |
Unsigned32r/w Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.6 |
||||||||||||||
|
The profile used to mark outer VLAN priority (P-bit) of outgoing
and incoming test and TWAMP packets. The configured value is the index of the corresponding entry in rad.markingProfileTable. … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.7 |
||||||||||||||
|
The inner VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no inner VLAN the value 4294967295 is used. This object is relevant only when l3SatGeneratorApplication is … |
Unsigned32r/w Constraints: range: 0-4095range: 4294967295-4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.8 |
||||||||||||||
|
The inner VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets. This object is relevant only when l3SatGeneratorApplication is set to l3OverL2(2) and l3SatGeneratorInnerVlan is n… |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.9 |
||||||||||||||
|
The number of the router under which the L3 SAT is performed.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.10 |
||||||||||||||
|
The type of IP address of the L3 SAT generator.
|
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.164.6.1.15.2.11.1.11 |
||||||||||||||
|
The IP address of the L3 SAT generator.
|
INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.1.15.2.11.1.12 |
||||||||||||||
|
The ifIndex of the associated router interface.
|
IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.164.6.1.15.2.11.1.13 |
||||||||||||||
|
The current status of the generator:
Shutdown - the generator is disabled. Idle - some of the mandatory attributes were not configured yet e.g. L2 parameters, router interface creation. Ready … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.11.1.14 |
l3SatPeerTable
table.1.3.6.1.4.1.164.6.1.15.2.12
·
1 row entry
·
21 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatPeerTable'
This table contains a list of peers entities used in L3 SATs.
An entry in L3 SAT peer table.
A row cannot be modified or deleted while the peer is active
(indicated by l3SatPeerCurrentPhase != idle(1)).
When a row is deleted all the corresponding rows in …
A row cannot be modified or deleted while the peer is active
(indicated by l3SatPeerCurrentPhase != idle(1)).
When a row is deleted all the corresponding rows in …
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The type of IP address of the L3 SAT peer.
|
INET-ADDRESS-MIBInetAddressType Type Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.1 |
||||||||||||||
|
The IP address of the L3 SAT peer.
|
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.2 |
||||||||||||||
|
This object enables creation and deletion of L3 SAT peers.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.164.6.1.15.2.12.1.3 |
||||||||||||||
|
The profile used for the peer parameters.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.4 |
||||||||||||||
|
A command to activate or de-activate the test at the generator side.
If sanity checks prevent the test activation then a set to start(1) shall be rejected with an SNMP error. Upon successfu… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.5 |
||||||||||||||
|
Indication whether the configuration of the peer was changed after
the test was completed. The configuration of the peer, in this context, includes the following: - The object l3SatPeerProfile. - All the … |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.164.6.1.15.2.12.1.6 |
||||||||||||||
|
The time remaining till the end of the test.
If the peer is not active a value of zero is returned. |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.7 |
||||||||||||||
|
The current phase of the test.
If the peer is not active the value idle(1) is returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.8 |
||||||||||||||
|
The current TOD synchronization state with the responder device.
The value unknown(1) is returned if the generator device is connected to an NTP server but the peer is not active (means no TWAMP to pass i… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.9 |
||||||||||||||
|
The discovered type of the responder.
If the peer was never activated the value unknown(1) is returned. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.10 |
||||||||||||||
|
The discovered IP MTU of the path to the responder.
If the peer was never activated the value zero is returned. |
Unsigned32 Constraints: range: 0-0range: 68-2094 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.11 |
||||||||||||||
|
The date and time at the last peer activation.
If the peer was never activated a null value is returned. |
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.164.6.1.15.2.12.1.12 |
||||||||||||||
|
The date and time when the last test was ended (regardless of the end
result passed/failed/aborted). If a test is in progress or the peer was never activated a null value is returned. |
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.164.6.1.15.2.12.1.13 |
||||||||||||||
|
For an in progress test - the elapsed time of the current test.
For a completed test - the duration of the last test. If the peer was never activated a zero value is returned. |
secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.14 |
||||||||||||||
|
The number of seconds there was no TOD synchronization with the
responder device. If the peer was never activated a zero value is returned. |
secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.15 |
||||||||||||||
|
The overall result of the last test.
The value notApplicable(1) is returned in the following cases: - The test is currently in progress. - The peer was never activated. The value passed(2) … |
RAD-TCRadTestResult Type Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.16 |
||||||||||||||
|
The duration of the configuration phase.
This duration is used for each test session. This object is a copy of the corresponding object in the peer profile. The duplication is done to keep the report vali… |
secondsUnsigned32 Constraints: range: 60-300 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.17 |
||||||||||||||
|
The duration of the performance phase.
This object is a copy of the corresponding object in the peer profile and is used for availability calculation. The duplication is done to keep the report valid even… |
minutesUnsigned32 Constraints: range: 4-7200 |
.1.3.6.1.4.1.164.6.1.15.2.12.1.18 |
||||||||||||||
|
The scope of the test: configuration phase, performance phase, or both
phases. This object is a copy of the corresponding object in the peer profile. The duplication is done to keep the report valid even if the peer pro… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.19 |
||||||||||||||
|
The result of the last connectivity sub-test.
The value notApplicable(1) is returned in the following cases: - The sub-test is currently in progress. - The peer was never activated. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.20 |
||||||||||||||
|
The result of the last MTU sub-test.
The value notApplicable(1) is returned in the following cases: - The sub-test is currently in progress. - The peer was never activated. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.12.1.21 |
l3SatSessionTable
table.1.3.6.1.4.1.164.6.1.15.2.13
·
1 row entry
·
13 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatSessionTable'
This table contains a list of test sessions used in L3 SATs.
An entry in L3 SAT session table.
A row may be created while the peer is active
(indicated by l3SatPeerCurrentPhase != idle(1)).
A row cannot be modified while the test is running
(indicated by…
A row may be created while the peer is active
(indicated by l3SatPeerCurrentPhase != idle(1)).
A row cannot be modified while the test is running
(indicated by…
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A meaningful printable test session name.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.1 |
||||||||||||||
|
This object enables creation and deletion of L3 SAT test session.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.164.6.1.15.2.13.1.2 |
||||||||||||||
|
The profile used for the test session parameters.
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.3 |
||||||||||||||
|
The rate of the test session traffic.
|
kbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.4 |
||||||||||||||
|
The priority value for the test session traffic.
|
Unsigned32r/w Constraints: range: 0-63 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.5 |
||||||||||||||
|
Indication whether the configuration of the test session was changed
after the test was completed. If the configuration was changed then threshold values should not be shown in a detailed report (there is… |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.164.6.1.15.2.13.1.6 |
||||||||||||||
|
The current status of the test session:
Idle - the generator is in status shutdown(1) or idle(2). Ready - waiting for activation of the peer. In progress - the test is currently running. Passed - the t… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.13.1.7 |
||||||||||||||
|
The L4 source port of the loss measurement stream.
|
INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.8 |
||||||||||||||
|
The L4 destination port of the loss measurement stream.
|
INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.9 |
||||||||||||||
|
The L4 source port of delay the measurement stream.
|
INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.10 |
||||||||||||||
|
The L4 destination port of the delay measurement stream.
|
INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535 |
.1.3.6.1.4.1.164.6.1.15.2.13.1.11 |
||||||||||||||
|
The result of the configuration phase.
The value notApplicable(1) is returned in the following cases: - The configuration phase was not performed in the last test. - The configuration phase is currently i… |
RAD-TCRadTestResult Type Values:
|
.1.3.6.1.4.1.164.6.1.15.2.13.1.12 |
||||||||||||||
|
The result of the last performance phase.
The value notApplicable(1) is returned in the following cases: - The performance phase was not performed in the last test. - The performance phase is currently in… |
RAD-TCRadTestResult Type Values:
|
.1.3.6.1.4.1.164.6.1.15.2.13.1.13 |
l3SatResponderTable
table.1.3.6.1.4.1.164.6.1.15.2.14
·
1 row entry
·
17 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatResponderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatResponderTable'
This table contains a list of responder entities used in L3 SATs.
An entry in L3 SAT responder table.
A row cannot be modified when the RowStatus is active(1).
A row cannot be modified when the RowStatus is active(1).
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
A meaningful printable responder name.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.1 |
||||||||||||||
|
This object enables creation and deletion of L3 SAT responders.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.164.6.1.15.2.14.1.2 |
||||||||||||||
|
The role of the responder device in the service path - L3 forwarder
or L2 probe. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.14.1.3 |
||||||||||||||
|
The associated physical or logical port.
This object is relevant only when l3SatResponderApplication is set to l3OverL2(2). |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.164.6.1.15.2.14.1.4 |
||||||||||||||
|
The outer VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no outer VLAN the value 4294967295 is used. This object is relevant only when l3SatResponderApplication is … |
Unsigned32r/w Constraints: range: 0-4095range: 4294967295-4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.5 |
||||||||||||||
|
The outer VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets. A value of 255 means the marking profile of l3SatResponderOuterMarkingProfile is used instead of this object. … |
Unsigned32r/w Constraints: range: 0-7range: 255-255 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.6 |
||||||||||||||
|
The profile used to mark outer VLAN priority (P-bit) of outgoing
and incoming test and TWAMP packets. The configured value is the index of the corresponding entry in rad.markingProfileTable. … |
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.7 |
||||||||||||||
|
The inner VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no inner VLAN the value 4294967295 is used. This object is relevant only when l3SatResponderApplication is … |
Unsigned32r/w Constraints: range: 0-4095range: 4294967295-4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.8 |
||||||||||||||
|
The inner VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets. This object is relevant only when l3SatResponderApplication is set to l3OverL2(2) and l3SatResponderInnerVlan is n… |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.9 |
||||||||||||||
|
The number of the router under which the L3 SAT is performed.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.10 |
||||||||||||||
|
The type of IP address of the L3 SAT responder.
|
INET-ADDRESS-MIBInetAddressTyper/w Type Values:
|
.1.3.6.1.4.1.164.6.1.15.2.14.1.11 |
||||||||||||||
|
The IP address of the L3 SAT responder.
|
INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.12 |
||||||||||||||
|
The start of the range of UDP ports that are used in the tests.
Must be a multiple of 16. |
Unsigned32r/w Constraints: range: 0-65504 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.13 |
||||||||||||||
|
The ifIndex of the associated router interface.
|
IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.164.6.1.15.2.14.1.14 |
||||||||||||||
|
The current status of the generator:
Shutdown - the responder is disabled. Idle - some of the mandatory attributes were not configured yet e.g. L2 parameters, router interface creation. Ready … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.2.14.1.15 |
||||||||||||||
|
The total number of packets received on all loss measurement
streams. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.16 |
||||||||||||||
|
The total number of packets received on all delay measurement
streams. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.1.15.2.14.1.17 |
l3SatReportTable
table.1.3.6.1.4.1.164.6.1.15.3.11
·
1 row entry
·
37 columns
Uses the rad variant from
Command help
/opt/observium/mibs/rad.
Walk l3SatReportTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RAD-L3SAT-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RAD-L3SAT-MIB::l3SatReportTable'
This table holds the measurements and results for each L3 SAT session that was performed.
An entry in L3 SAT report table.
Rows are automatically created when the corresponding peer in the
l3SatPeerTable is successfully activated - for details, see
below the description of the index objects.
…
Rows are automatically created when the corresponding peer in the
l3SatPeerTable is successfully activated - for details, see
below the description of the index objects.
…
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The IP size index of the report.
Allows holding measurements and result per IP size. One entry for each set IP size in the corresponding l3SatSessionProfileIpSize. |
RadTestIpSizeIndex Type Values:
|
.1.3.6.1.4.1.164.6.1.15.3.11.1.1 |
||||||||||||||||||
|
The sub-test type index of the report.
Allows holding measurements and result per sub-test type. Entries are created according to the associated configuration in the profile e.g. number of BW steps, traff… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.164.6.1.15.3.11.1.2 |
||||||||||||||||||
|
The result of the sub-test.
The initial value is notApplicable(1). Upon completion of the sub-test the value changes to passed(2) or failed(3). If the test is stopped by the operator before the completion… |
RAD-TCRadTestResult Type Values:
|
.1.3.6.1.4.1.164.6.1.15.3.11.1.3 |
||||||||||||||||||
|
The transmission rate that the generator was configured to in the
sub-test. |
kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.4 |
||||||||||||||||||
|
The average calculated information rate.
The initial value is zero. |
kbpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.5 |
||||||||||||||||||
|
The number of transmitted packets.
The initial value is one. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.6 |
||||||||||||||||||
|
The number of packets lost.
The PLR is calculated by: (l3SatReportLostPackets / l3SatReportTxPackets) The initial value is zero. |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.7 |
||||||||||||||||||
|
The number of unavailable seconds.
This object is relevant only for the performance test. For the other test type entries the value is zero. The initial value is zero. |
secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.8 |
||||||||||||||||||
|
The percentage of available time.
The availability is calculated by: (60*l3SatPeerPerfDuration - l3SatReportUas) * 10000 / (60*l3SatPeerPerfDuration) This object is relevant only for the pe… |
hundredth of percentUnsigned32 Constraints: range: 0-10000 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.9 |
||||||||||||||||||
|
The minimum measured packet transfer delay.
The initial value is zero. |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.10 |
||||||||||||||||||
|
The average calculated packet transfer delay.
The initial value is zero. |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.11 |
||||||||||||||||||
|
The maximum measured packet transfer delay.
The initial value is zero. |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.12 |
||||||||||||||||||
|
The calculated standard deviation of the packet transfer delay.
The initial value is zero. |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.13 |
||||||||||||||||||
|
The average calculated packet delay variation.
The initial value is zero. |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.14 |
||||||||||||||||||
|
The maximum calculated packet delay variation.
The initial value is zero. |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.15 |
||||||||||||||||||
|
The average calculated forward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4). For the other responder types the value is zero. … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.16 |
||||||||||||||||||
|
The maximum calculated forward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4). For the other responder types the value is zero. … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.17 |
||||||||||||||||||
|
The average calculated backward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4). For the other responder types the value is zero. … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.18 |
||||||||||||||||||
|
The maximum calculated backward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4). For the other responder types the value is zero. … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.19 |
||||||||||||||||||
|
The number of duplicated packets in the forward direction.
This object is relevant only for the performance test and only when l3SatPeerResponderType is loopAndTimestamp(4). For the other test type entrie… |
packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.20 |
||||||||||||||||||
|
The number of duplicated packets in the backward direction.
This object is relevant only for the performance test and only when l3SatPeerResponderType is loopAndTimestamp(4). For the other test type entri… |
packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.21 |
||||||||||||||||||
|
The number of reordered packets in the forward direction.
This object is relevant only for the performance test and only when l3SatPeerResponderType is loopAndTimestamp(4). For the other test type entries… |
packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.22 |
||||||||||||||||||
|
The number of reordered packets in the backward direction.
This object is relevant only for the performance test and only when l3SatPeerResponderType is loopAndTimestamp(4). For the other test type entrie… |
packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.23 |
||||||||||||||||||
|
The minimum measured forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases the … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.24 |
||||||||||||||||||
|
The average calculated forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases th… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.25 |
||||||||||||||||||
|
The maximum measured forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases the … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.26 |
||||||||||||||||||
|
The calculated standard deviation of the forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.27 |
||||||||||||||||||
|
The minimum measured backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases the… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.28 |
||||||||||||||||||
|
The average calculated backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases t… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.29 |
||||||||||||||||||
|
The maximum measured backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases the… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.30 |
||||||||||||||||||
|
The calculated standard deviation of the backward packet transfer
delay. This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.31 |
||||||||||||||||||
|
The average calculated forward packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases t… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.32 |
||||||||||||||||||
|
The maximum calculated forward packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases t… |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.33 |
||||||||||||||||||
|
The average calculated backward packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.34 |
||||||||||||||||||
|
The maximum calculated backward packet delay variation.
This object is relevant only when l3SatPeerResponderType is loopAndTimestamp(4) and l3SatPeerProfileReportType is clockSync(1). For the other cases … |
micro secondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.35 |
||||||||||||||||||
|
The number of valid received TWAMP packets in the forward direction.
Timeout (lost) and duplicated packets are not valid. The PDR is calculated by: (l3SatReportDuplicatedPacketsFwd / l3SatReportValidRxTwa… |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.36 |
||||||||||||||||||
|
The number of valid received TWAMP packets in the backward direction.
Timeout (lost) and duplicated packets are not valid. The PDR is calculated by: (l3SatReportDuplicatedPacketsBck / l3SatReportValidRxTw… |
packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.164.6.1.15.3.11.1.37 |