l3SatResponderOuterMarkingProfile
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.2.14.1.7
Object
The profile used to mark outer VLAN priority (P-bit) of outgoing
and incoming test and TWAMP packets.
The configured value is the index of the corresponding entry in
rad.markingProfileTable.
A value of zero means a fixed marking per
l3SatResponderOuterPbit is used instead of this object.
This object is relevant only when l3SatResponderApplication is
set to l3OverL2(2) and l3SatResponderOuterVlan is not set to
4294967295.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.2.14.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- l3SatResponderEntry
- Table
- l3SatResponderTable
- Siblings
- 16
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatResponderName A meaningful printable responder name. | column | OctetString | .1.3.6.1.4.1.164.6.1.15.2.14.1.1 |
| l3SatResponderRouterEntity The number of the router under which the L3 SAT is performed. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.10 |
| l3SatResponderLocalAddrType The type of IP address of the L3 SAT responder. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.6.1.15.2.14.1.11 |
| l3SatResponderLocalAddr The IP address of the L3 SAT responder. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.6.1.15.2.14.1.12 |
| l3SatResponderL4Port The start of the range of UDP ports that are used in the tests.
Must be a multiple of 16. | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.13 |
| l3SatResponderRouterInterface The ifIndex of the associated router interface. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.6.1.15.2.14.1.14 |
| l3SatResponderStatus The current status of the generator:
Shutdown - the responder is disabled.
Idle - some of the mandatory attributes were not configured
yet e.g. L2 paramete… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.14.1.15 |
| l3SatResponderLmRxPackets The total number of packets received on all loss measurement
streams. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.2.14.1.16 |
| l3SatResponderDmRxPackets The total number of packets received on all delay measurement
streams. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.2.14.1.17 |
| l3SatResponderRowStatus This object enables creation and deletion of L3 SAT responders. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.6.1.15.2.14.1.2 |
| l3SatResponderApplication The role of the responder device in the service path - L3 forwarder
or L2 probe. | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.2.14.1.3 |
| l3SatResponderInterface The associated physical or logical port.
This object is relevant only when l3SatResponderApplication is
set to l3OverL2(2). | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.6.1.15.2.14.1.4 |
| l3SatResponderOuterVlan The outer VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no outer VLAN the value 4294967295 is used.
This object is relevant… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.5 |
| l3SatResponderOuterPbit The outer VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets.
A value of 255 means the marking profile of
l3SatResponderOuterMarkingProf… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.6 |
| l3SatResponderInnerVlan The inner VLAN tag of outgoing and incoming test and TWAMP packets.
When there is no inner VLAN the value 4294967295 is used.
This object is relevant… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.8 |
| l3SatResponderInnerPbit The inner VLAN priority (P-bit) assigned to outgoing and incoming
test and TWAMP packets.
This object is relevant only when l3SatResponderApplication is
set to l3Ov… | column | Unsigned32 | .1.3.6.1.4.1.164.6.1.15.2.14.1.9 |