l3SatReportUas
RAD-L3SAT-MIB ·
.1.3.6.1.4.1.164.6.1.15.3.11.1.8
Object
The number of unavailable seconds.
This object is relevant only for the performance test. For the other
test type entries the value is zero.
The initial value is zero.
Context
- MIB
- RAD-L3SAT-MIB
- OID
.1.3.6.1.4.1.164.6.1.15.3.11.1.8- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- l3SatReportEntry
- Table
- l3SatReportTable
- Siblings
- 36
Syntax
seconds SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| l3SatReportIpSize The IP size index of the report.
Allows holding measurements and result per IP size.
One entry for each set IP size in the corresponding
l3SatSessionProfileIpSize. | column | RadTestIpSizeIndex | .1.3.6.1.4.1.164.6.1.15.3.11.1.1 |
| l3SatReportPtdMin The minimum measured packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.10 |
| l3SatReportPtdAverage The average calculated packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.11 |
| l3SatReportPtdMax The maximum measured packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.12 |
| l3SatReportPtdStd The calculated standard deviation of the packet transfer delay.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.13 |
| l3SatReportPdvAverage The average calculated packet delay variation.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.14 |
| l3SatReportPdvMax The maximum calculated packet delay variation.
The initial value is zero. | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.15 |
| l3SatReportIpdvAverageFwd The average calculated forward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other responde… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.16 |
| l3SatReportIpdvMaxFwd The maximum calculated forward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other responde… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.17 |
| l3SatReportIpdvAverageBck The average calculated backward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other respond… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.18 |
| l3SatReportIpdvMaxBck The maximum calculated backward inter-packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4). For the other respond… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.19 |
| l3SatReportTestType The sub-test type index of the report.
Allows holding measurements and result per sub-test type.
Entries are created according to the associated configuration in th… | column | Enumeration | .1.3.6.1.4.1.164.6.1.15.3.11.1.2 |
| l3SatReportDuplicatedPacketsFwd The number of duplicated packets in the forward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTime… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.20 |
| l3SatReportDuplicatedPacketsBck The number of duplicated packets in the backward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTim… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.21 |
| l3SatReportReorderedPacketsFwd The number of reordered packets in the forward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTimes… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.22 |
| l3SatReportReorderedPacketsBck The number of reordered packets in the backward direction.
This object is relevant only for the performance test and only when
l3SatPeerResponderType is loopAndTime… | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.23 |
| l3SatReportPtdMinFwd The minimum measured forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType i… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.24 |
| l3SatReportPtdAverageFwd The average calculated forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.25 |
| l3SatReportPtdMaxFwd The maximum measured forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType i… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.26 |
| l3SatReportPtdStdFwd The calculated standard deviation of the forward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPee… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.27 |
| l3SatReportPtdMinBck The minimum measured backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType … | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.28 |
| l3SatReportPtdAverageBck The average calculated backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTyp… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.29 |
| l3SatReportResult The result of the sub-test.
The initial value is notApplicable(1).
Upon completion of the sub-test the value changes to passed(2) or
failed(3).
If the test is stopp… | column | RAD-TCRadTestResult | .1.3.6.1.4.1.164.6.1.15.3.11.1.3 |
| l3SatReportPtdMaxBck The maximum measured backward packet transfer delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportType … | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.30 |
| l3SatReportPtdStdBck The calculated standard deviation of the backward packet transfer
delay.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPe… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.31 |
| l3SatReportPdvAverageFwd The average calculated forward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTyp… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.32 |
| l3SatReportPdvMaxFwd The maximum calculated forward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTyp… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.33 |
| l3SatReportPdvAverageBck The average calculated backward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTy… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.34 |
| l3SatReportPdvMaxBck The maximum calculated backward packet delay variation.
This object is relevant only when l3SatPeerResponderType is
loopAndTimestamp(4) and l3SatPeerProfileReportTy… | column | micro seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.35 |
| l3SatReportValidRxTwampPacketsFwd The number of valid received TWAMP packets in the forward direction.
Timeout (lost) and duplicated packets are not valid.
The PDR is calculated by:
(l3SatReportDupl… | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.36 |
| l3SatReportValidRxTwampPacketsBck The number of valid received TWAMP packets in the backward direction.
Timeout (lost) and duplicated packets are not valid.
The PDR is calculated by:
(l3SatReportDup… | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.37 |
| l3SatReportTxRate The transmission rate that the generator was configured to in the
sub-test. | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.4 |
| l3SatReportIrAverage The average calculated information rate.
The initial value is zero. | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.5 |
| l3SatReportTxPackets The number of transmitted packets.
The initial value is one. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.6 |
| l3SatReportLostPackets The number of packets lost.
The PLR is calculated by:
(l3SatReportLostPackets / l3SatReportTxPackets)
The initial value is zero. | column | packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.164.6.1.15.3.11.1.7 |
| l3SatReportAvailability The percentage of available time.
The availability is calculated by:
(60*l3SatPeerPerfDuration - l3SatReportUas) * 10000 / (60*l3SatPeerPerfDuration)
… | column | hundredth of percent Unsigned32 | .1.3.6.1.4.1.164.6.1.15.3.11.1.9 |