POWER-ETHERNET-MIB Table View

A table of objects that display and control the power
characteristics of power Ethernet ports on a Power Source
Entity (PSE) device.  This group will be implemented in
managed power Ethernet switches and mid-span devices.
Values of all read-write objects in this table are
persistent at restart/reboot.

pethPsePortEntry row .1.3.6.1.2.1.105.1.1.1

A set of objects that display and control the power
characteristics of a power Ethernet PSE port.

Indexes

pethPsePortGroupIndex pethPsePortIndex

Column	Syntax	OID
pethPsePortGroupIndex This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermo…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.105.1.1.1.1
pethPsePortIndex This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.105.1.1.1.2
pethPsePortAdminEnable true (1) An interface which can provide the PSE functions. false(2) The interface will act as it would if it had no PSE function.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.105.1.1.1.3
pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the power pairs. When false the PSE Pinout …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.105.1.1.1.4
pethPsePortPowerPairs Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are in use. A value of spare(2) means that th…	Enumerationr/w Enumerated Values: 1 signal 2 spare	.1.3.6.1.2.1.105.1.1.1.5
pethPsePortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is i…	Enumeration Enumerated Values: 1 disabled 2 searching 3 deliveringPower 4 fault 5 test 6 otherFault	.1.3.6.1.2.1.105.1.1.1.6
pethPsePortPowerPriority This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations…	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.2.1.105.1.1.1.7
pethPsePortMPSAbsentCounter This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.1.1.8
pethPsePortType A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet str…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.105.1.1.1.9
pethPsePortPowerClassifications Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4	.1.3.6.1.2.1.105.1.1.1.10
pethPsePortInvalidSignatureCounter This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.1.1.11
pethPsePortPowerDeniedCounter This counter is incremented when the PSE state diagram enters the state POWER_DENIED.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.1.1.12
pethPsePortOverLoadCounter This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.1.1.13
pethPsePortShortCounter This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_SHORT.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.1.1.14
pethPsePortActualPower See IEEE Std 802.3, 30.9.1.1.12 aPSEActualPower.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.105.1.1.1.15
pethPsePortPowerAccuracy See IEEE Std 802.3, 30.9.1.1.13 aPSEPowerAccuracy.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.105.1.1.1.16
pethPsePortCumulativeEnergy See IEEE Std 802.3, 30.9.1.1.14 aPSECumulativeEnergy.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.1.1.17

A table of objects that display and control attributes
of the main power source in a PSE  device.  Ethernet
switches are one example of boxes that would support
these objects.
Values of all read-write objects in this table are
persistent at restart/reboot.

pethMainPseEntry row .1.3.6.1.2.1.105.1.3.1.1

A set of objects that display and control the Main
power of a PSE.

Indexes

pethMainPseGroupIndex

Column	Syntax	OID
pethMainPseGroupIndex This variable uniquely identifies the group to which power Ethernet PSE is connected. Group means (box in the stack, module in a rack) and the value 1 MUST be used for non-modular devices. Furthermore, the same value …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.105.1.3.1.1.1
pethMainPsePower The nominal power of the PSE expressed in Watts.	WattsUnsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.105.1.3.1.1.2
pethMainPseOperStatus The operational status of the main PSE.	Enumeration Enumerated Values: 1 on 2 off 3 faulty	.1.3.6.1.2.1.105.1.3.1.1.3
pethMainPseConsumptionPower Measured usage power expressed in Watts.	WattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.105.1.3.1.1.4
pethMainPseUsageThreshold The usage threshold expressed in percents for comparing the measured power and initiating an alarm if the threshold is exceeded.	%Integer32r/w Constraints: range: 1-99	.1.3.6.1.2.1.105.1.3.1.1.5

A table of objects that display and control the
Notification on a PSE  device.
Values of all read-write objects in this table are
persistent at restart/reboot.

pethNotificationControlEntry row .1.3.6.1.2.1.105.1.4.1.1

A set of objects that control the Notification events.

Indexes

pethNotificationControlGroupIndex

Column	Syntax	OID
pethNotificationControlGroupIndex This variable uniquely identifies the group. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethPsePortG…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.105.1.4.1.1.1
pethNotificationControlEnable This object controls, on a per-group basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.105.1.4.1.1.2