pethPsePortType

POWER-ETHERNET-MIB · .1.3.6.1.2.1.105.1.1.1.9

MIB view Table view

Object

column r/w SNMP-FRAMEWORK-MIBSnmpAdminString

A manager will set the value of this variable to indicate
the type of powered device that is connected to the port.
The default value supplied by the agent if no value has
ever been set should be a zero-length octet string.

Context

MIB: POWER-ETHERNET-MIB
OID: .1.3.6.1.2.1.105.1.1.1.9
Type: column
Access: readwrite
Status: current
Parent: pethPsePortEntry
Table: pethPsePortTable
Siblings: 16

Syntax

SNMP-FRAMEWORK-MIBSnmpAdminString

Source: SNMP-FRAMEWORK-MIBSnmpAdminString
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pethPsePortGroupIndex This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be…	column	Integer32	`.1.3.6.1.2.1.105.1.1.1.1`
pethPsePortPowerClassifications Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others…	column	Enumeration	`.1.3.6.1.2.1.105.1.1.1.10`
pethPsePortInvalidSignatureCounter This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.105.1.1.1.11`
pethPsePortPowerDeniedCounter This counter is incremented when the PSE state diagram enters the state POWER_DENIED.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.105.1.1.1.12`
pethPsePortOverLoadCounter This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.105.1.1.1.13`
pethPsePortShortCounter This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_SHORT.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.105.1.1.1.14`
pethPsePortActualPower See IEEE Std 802.3, 30.9.1.1.12 aPSEActualPower.	column	SNMPv2-SMIInteger32	`.1.3.6.1.2.1.105.1.1.1.15`
pethPsePortPowerAccuracy See IEEE Std 802.3, 30.9.1.1.13 aPSEPowerAccuracy.	column	SNMPv2-SMIInteger32	`.1.3.6.1.2.1.105.1.1.1.16`
pethPsePortCumulativeEnergy See IEEE Std 802.3, 30.9.1.1.14 aPSECumulativeEnergy.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.105.1.1.1.17`
pethPsePortIndex This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.	column	Integer32	`.1.3.6.1.2.1.105.1.1.1.2`
pethPsePortAdminEnable true (1) An interface which can provide the PSE functions. false(2) The interface will act as it would if it had no PSE function.	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.105.1.1.1.3`
pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the …	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.105.1.1.1.4`
pethPsePortPowerPairs Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are i…	column	Enumeration	`.1.3.6.1.2.1.105.1.1.1.5`
pethPsePortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - i…	column	Enumeration	`.1.3.6.1.2.1.105.1.1.1.6`
pethPsePortPowerPriority This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechani…	column	Enumeration	`.1.3.6.1.2.1.105.1.1.1.7`
pethPsePortMPSAbsentCounter This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.	column	SNMPv2-SMICounter32	`.1.3.6.1.2.1.105.1.1.1.8`