pethPsePortGroupIndex

POWER-ETHERNET-MIB · .1.3.6.1.2.1.105.1.1.1.1
MIB view Table view

Object

column Integer32 
This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected.  Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermore, the same value MUST be used in this variable,
pethMainPseGroupIndex, and pethNotificationControlGroupIndex
to refer to a given box in a stack or module in the rack.

Context

MIB
POWER-ETHERNET-MIB
OID
.1.3.6.1.2.1.105.1.1.1.1
Type
column
Access
noaccess
Status
current
Parent
pethPsePortEntry
Table
pethPsePortTable
Siblings
16

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pethPsePortPowerClassifications
Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others…
columnEnumeration.1.3.6.1.2.1.105.1.1.1.10
pethPsePortInvalidSignatureCounter
This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.105.1.1.1.11
pethPsePortPowerDeniedCounter
This counter is incremented when the PSE state diagram enters the state POWER_DENIED.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.105.1.1.1.12
pethPsePortOverLoadCounter
This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_OVER.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.105.1.1.1.13
pethPsePortShortCounter
This counter is incremented when the PSE state diagram enters the state ERROR_DELAY_SHORT.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.105.1.1.1.14
pethPsePortActualPower
See IEEE Std 802.3, 30.9.1.1.12 aPSEActualPower.
columnSNMPv2-SMIInteger32.1.3.6.1.2.1.105.1.1.1.15
pethPsePortPowerAccuracy
See IEEE Std 802.3, 30.9.1.1.13 aPSEPowerAccuracy.
columnSNMPv2-SMIInteger32.1.3.6.1.2.1.105.1.1.1.16
pethPsePortCumulativeEnergy
See IEEE Std 802.3, 30.9.1.1.14 aPSECumulativeEnergy.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.105.1.1.1.17
pethPsePortIndex
This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected.
columnInteger32.1.3.6.1.2.1.105.1.1.1.2
pethPsePortAdminEnable
true (1) An interface which can provide the PSE functions. false(2) The interface will act as it would if it had no PSE function.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.105.1.1.1.3
pethPsePortPowerPairsControlAbility
Describes the capability of controlling the power pairs functionality to switch pins for sourcing power. The value true indicate that the device has the capability to control the …
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.105.1.1.1.4
pethPsePortPowerPairs
Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are i…
columnEnumeration.1.3.6.1.2.1.105.1.1.1.5
pethPsePortDetectionStatus
Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - i…
columnEnumeration.1.3.6.1.2.1.105.1.1.1.6
pethPsePortPowerPriority
This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechani…
columnEnumeration.1.3.6.1.2.1.105.1.1.1.7
pethPsePortMPSAbsentCounter
This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.
columnSNMPv2-SMICounter32.1.3.6.1.2.1.105.1.1.1.8
pethPsePortType
A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever be…
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.2.1.105.1.1.1.9