pethPsePortPowerClassifications
POWER-ETHERNET-MIB ·
.1.3.6.1.2.1.105.1.1.1.10
Object
column
Enumeration
Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their power requirements.
The meaning of the classification labels is defined in the
IEEE specification.
This variable is valid only while a PD is being powered,
that is, while the attribute pethPsePortDetectionStatus
is reporting the enumeration deliveringPower.
Context
- MIB
- POWER-ETHERNET-MIB
- OID
.1.3.6.1.2.1.105.1.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pethPsePortEntry
- Table
- pethPsePortTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | class0 |
2 | class1 |
3 | class2 |
4 | class3 |
5 | class4 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pethPsePortGroupIndex This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be… | column | Integer32 | .1.3.6.1.2.1.105.1.1.1.1 |
| pethPsePortInvalidSignatureCounter This counter is incremented when the PSE state diagram
enters the state SIGNATURE_INVALID. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.11 |
| pethPsePortPowerDeniedCounter This counter is incremented when the PSE state diagram
enters the state POWER_DENIED. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.12 |
| pethPsePortOverLoadCounter This counter is incremented when the PSE state diagram
enters the state ERROR_DELAY_OVER. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.13 |
| pethPsePortShortCounter This counter is incremented when the PSE state diagram
enters the state ERROR_DELAY_SHORT. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.14 |
| pethPsePortActualPower See IEEE Std 802.3, 30.9.1.1.12 aPSEActualPower. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.105.1.1.1.15 |
| pethPsePortPowerAccuracy See IEEE Std 802.3, 30.9.1.1.13 aPSEPowerAccuracy. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.105.1.1.1.16 |
| pethPsePortCumulativeEnergy See IEEE Std 802.3, 30.9.1.1.14 aPSECumulativeEnergy. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.17 |
| pethPsePortIndex This variable uniquely identifies the power Ethernet PSE
port within group pethPsePortGroupIndex to which the
power Ethernet PSE entry is connected. | column | Integer32 | .1.3.6.1.2.1.105.1.1.1.2 |
| pethPsePortAdminEnable true (1) An interface which can provide the PSE functions.
false(2) The interface will act as it would if it had no PSE
function. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.105.1.1.1.3 |
| pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs
functionality to switch pins for sourcing power.
The value true indicate that the device has the capability
to control the … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.105.1.1.1.4 |
| pethPsePortPowerPairs Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are i… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.5 |
| pethPsePortDetectionStatus Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - i… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.6 |
| pethPsePortPowerPriority This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechani… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.7 |
| pethPsePortMPSAbsentCounter This counter is incremented when the PSE state diagram
transitions directly from the state POWER_ON to the
state IDLE due to tmpdo_timer_done being asserted. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.8 |
| pethPsePortType A manager will set the value of this variable to indicate
the type of powered device that is connected to the port.
The default value supplied by the agent if no value has
ever be… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.105.1.1.1.9 |