pethPsePortInvalidSignatureCounter
POWER-ETHERNET-MIB ·
.1.3.6.1.2.1.105.1.1.1.11
Object
column
SNMPv2-SMICounter32
This counter is incremented when the PSE state diagram enters the state SIGNATURE_INVALID.
Context
- MIB
- POWER-ETHERNET-MIB
- OID
.1.3.6.1.2.1.105.1.1.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pethPsePortEntry
- Table
- pethPsePortTable
- Siblings
- 16
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pethPsePortGroupIndex This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be… | column | Integer32 | .1.3.6.1.2.1.105.1.1.1.1 |
| pethPsePortPowerClassifications Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.10 |
| pethPsePortPowerDeniedCounter This counter is incremented when the PSE state diagram
enters the state POWER_DENIED. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.12 |
| pethPsePortOverLoadCounter This counter is incremented when the PSE state diagram
enters the state ERROR_DELAY_OVER. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.13 |
| pethPsePortShortCounter This counter is incremented when the PSE state diagram
enters the state ERROR_DELAY_SHORT. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.14 |
| pethPsePortActualPower See IEEE Std 802.3, 30.9.1.1.12 aPSEActualPower. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.105.1.1.1.15 |
| pethPsePortPowerAccuracy See IEEE Std 802.3, 30.9.1.1.13 aPSEPowerAccuracy. | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.105.1.1.1.16 |
| pethPsePortCumulativeEnergy See IEEE Std 802.3, 30.9.1.1.14 aPSECumulativeEnergy. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.17 |
| pethPsePortIndex This variable uniquely identifies the power Ethernet PSE
port within group pethPsePortGroupIndex to which the
power Ethernet PSE entry is connected. | column | Integer32 | .1.3.6.1.2.1.105.1.1.1.2 |
| pethPsePortAdminEnable true (1) An interface which can provide the PSE functions.
false(2) The interface will act as it would if it had no PSE
function. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.105.1.1.1.3 |
| pethPsePortPowerPairsControlAbility Describes the capability of controlling the power pairs
functionality to switch pins for sourcing power.
The value true indicate that the device has the capability
to control the … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.105.1.1.1.4 |
| pethPsePortPowerPairs Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are i… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.5 |
| pethPsePortDetectionStatus Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - i… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.6 |
| pethPsePortPowerPriority This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechani… | column | Enumeration | .1.3.6.1.2.1.105.1.1.1.7 |
| pethPsePortMPSAbsentCounter This counter is incremented when the PSE state diagram
transitions directly from the state POWER_ON to the
state IDLE due to tmpdo_timer_done being asserted. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.105.1.1.1.8 |
| pethPsePortType A manager will set the value of this variable to indicate
the type of powered device that is connected to the port.
The default value supplied by the agent if no value has
ever be… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.105.1.1.1.9 |