Trap being sent indicates that a management module has been inserted int the chassis.
mcrMgtDateTimeChg
.1.3.6.1.4.1.1966.21.1.1.0.10
Trap being sent indicates that the system date and/or time has been changed.
mcrChassisCommTempSensorRecov
.1.3.6.1.4.1.1966.21.1.1.0.100
sent indicates that communication with the chassis temperature
sensor has recovered.
mcrMediaDetectFail
.1.3.6.1.4.1.1966.21.1.1.0.101
sent indicates that the indicated media card is being powered
down due to the detection of a hardware failure.
mcrMediaBadImage
.1.3.6.1.4.1.1966.21.1.1.0.102
sent indicates that the CRC of the media converter module firmware is
incorrect. This can be caused if there is no image on the module or the
image is corrupt.
mcrSfpLostComm
.1.3.6.1.4.1.1966.21.1.1.0.103
sent indicates that the media converter module's microcode can no longer
communicate with the SFP module.
mcrSfpRecovComm
.1.3.6.1.4.1.1966.21.1.1.0.104
sent indicates that the media converter module's microcode had previously
lost communication with, but has now regained communication with the SFP
module.
mcrModuleNotSupported
.1.3.6.1.4.1.1966.21.1.1.0.105
sent indicates that the media converter module is not fully supported by
the management module. Update the management module firmware to rectify
this issue.
mcrModuleFirmwareUpdate
.1.3.6.1.4.1.1966.21.1.1.0.106
Trap being sent indicates that the media converter module firmware is being updated.
mcrSfpPortShutdown
.1.3.6.1.4.1.1966.21.1.1.0.107
sent indicates that the Sfp/Xfp port has been shutdown due to
high temperature.
mcrSfpPortShutdownRecov
.1.3.6.1.4.1.1966.21.1.1.0.108
Trap being sent indicates that the Sfp/Xfp port shutdown has recovered.
mcrXfpHighApdBiasWarn
.1.3.6.1.4.1.1966.21.1.1.0.109
sent indicates that an XFP module's APD Bias Current has
exceeded the high APD Bias warning threshold.
mcrMgtSntpServFail
.1.3.6.1.4.1.1966.21.1.1.0.11
sent indicates that SNTP is configured and the management module can
not communicate with the configured SNTP server.
mcrXfpHighApdBiasWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.110
sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level.
mcrXfpHighApdBiasAlarm
.1.3.6.1.4.1.1966.21.1.1.0.111
sent indicates that an XFP module's APD Bias Current has
exceeded the high APD Bias alarm threshold.
mcrXfpHighApdBiasAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.112
sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level.
mcrXfpLowApdBiasWarn
.1.3.6.1.4.1.1966.21.1.1.0.113
sent indicates that an XFP module's APD Bias Current has gone
below the low APD Bias warning threshold.
mcrXfpLowApdBiasWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.114
sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level.
mcrXfpLowApdBiasAlarm
.1.3.6.1.4.1.1966.21.1.1.0.115
sent indicates that an XFP module's APD Bias Current has gone
below the low APD Bias alarm threshold.
mcrXfpLowApdBiasAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.116
sent indicates that an XFP module's APD Bias Current has
recovered to normal operating level.
mcrXfpHighTecCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.117
sent indicates that an XFP module's TEC Current has
exceeded the high TEC Current warning threshold.
mcrXfpHighTecCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.118
sent indicates that an XFP module's TEC Current has
recovered to normal operating level.
mcrXfpHighTecCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.119
sent indicates that an XFP module's TEC Current has
exceeded the high TEC Current alarm threshold.
mcrMgtSntpServRec
.1.3.6.1.4.1.1966.21.1.1.0.12
sent indicates that the SNTP is configured and the management module
has recovered communications with the configured SNTP server.
mcrXfpHighTecCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.120
sent indicates that an XFP module's TEC Current has
recovered to normal operating level.
mcrXfpLowTecCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.121
sent indicates that an XFP module's TEC Current has gone
below the low TEC Current warning threshold.
mcrXfpLowTecCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.122
sent indicates that an XFP module's TEC Current has
recovered to normal operating level.
mcrXfpLowTecCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.123
sent indicates that an XFP module's TEC Current has gone
below the low TEC Current alarm threshold.
mcrXfpLowTecCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.124
sent indicates that an XFP module's TEC Current has
recovered to normal operating level.
mcrXfpHighLaserTempWarn
.1.3.6.1.4.1.1966.21.1.1.0.125
sent indicates that an XFP module's Laser Temperature has
exceeded the high Laser Temperature warning threshold.
mcrXfpHighLaserTempWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.126
sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level.
mcrXfpHighLaserTempAlarm
.1.3.6.1.4.1.1966.21.1.1.0.127
sent indicates that an XFP module's Laser Temperature has
exceeded the high Laser Temperature alarm threshold.
mcrXfpHighLaserTempAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.128
sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level.
mcrXfpLowLaserTempWarn
.1.3.6.1.4.1.1966.21.1.1.0.129
sent indicates that an XFP module's Laser Temperature has gone
below the low Laser Temperature warning threshold.
mcrMgtSnmpTrapHostFail
.1.3.6.1.4.1.1966.21.1.1.0.13
sent indicates that SNMP traps is and the management module
can not communicate with the configured SNMP trap host. This trap will only be
sent for SNMP trap hosts configured for 'Inform' type traps.
mcrXfpLowLaserTempWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.130
sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level.
mcrXfpLowLaserTempAlarm
.1.3.6.1.4.1.1966.21.1.1.0.131
sent indicates that an XFP module's Laser Temperature has gone
below the low Laser Temperature alarm threshold.
mcrXfpLowLaserTempAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.132
sent indicates that an XFP module's Laser Temperature has
recovered to normal operating level.
mcrXfpHighLaserWavelengthWarn
.1.3.6.1.4.1.1966.21.1.1.0.133
sent indicates that an XFP module's Laser Wavelength has
exceeded the high Laser Wavelength warning threshold.
mcrXfpHighLaserWavelengthWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.134
sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level.
mcrXfpHighLaserWavelengthAlarm
.1.3.6.1.4.1.1966.21.1.1.0.135
sent indicates that an XFP module's Laser Wavelength has
exceeded the high Laser Wavelength alarm threshold.
mcrXfpHighLaserWavelengthAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.136
sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level.
mcrXfpLowLaserWavelengthWarn
.1.3.6.1.4.1.1966.21.1.1.0.137
sent indicates that an XFP module's Laser Wavelength has gone
below the low Laser Wavelength warning threshold.
mcrXfpLowLaserWavelengthWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.138
sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level.
mcrXfpLowLaserWavelengthAlarm
.1.3.6.1.4.1.1966.21.1.1.0.139
sent indicates that an XFP module's Laser Wavelength has gone
below the low Laser Wavelength alarm threshold.
mcrMgtSnmpTrapHostRec
.1.3.6.1.4.1.1966.21.1.1.0.14
sent indicates that SNMP traps is and the management module
has recovered communications with the configured SNMP trap host.
mcrXfpLowLaserWavelengthAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.140
sent indicates that an XFP module's Laser Wavelength has
recovered to normal operating level.
mcrXfpHigh5VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.141
sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply warning threshold.
mcrXfpHigh5VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.142
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpHigh5VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.143
sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply alarm threshold.
mcrXfpHigh5VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.144
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpLow5VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.145
sent indicates that an XFP module's +5v supply has gone
below the low +5v supply warning threshold.
mcrXfpLow5VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.146
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpLow5VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.147
sent indicates that an XFP module's +5v supply has gone
below the low +5v supply alarm threshold.
mcrXfpLow5VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.148
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpHigh33VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.149
sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply warning threshold.
mcrMgtEmailServFail
.1.3.6.1.4.1.1966.21.1.1.0.15
sent indicates that an alert email server is configured and the management
module can not communicate with the configured email server.
mcrXfpHigh33VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.150
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpHigh33VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.151
sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply alarm threshold.
mcrXfpHigh33VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.152
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpLow33VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.153
sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply warning threshold.
mcrXfpLow33VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.154
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpLow33VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.155
sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply alarm threshold.
mcrXfpLow33VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.156
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpHigh18VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.157
sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply warning threshold.
mcrXfpHigh18VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.158
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpHigh18VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.159
sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply alarm threshold.
mcrMgtEmailServRec
.1.3.6.1.4.1.1966.21.1.1.0.16
sent indicates that an alert email server is configured and the management
module has recovered communications with the configured email server.
mcrXfpHigh18VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.160
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpLow18VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.161
sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply warning threshold.
mcrXfpLow18VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.162
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpLow18VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.163
sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply alarm threshold.
mcrXfpLow18VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.164
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpHighM52VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.165
sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply warning threshold.
mcrXfpHighM52VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.166
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpHighM52VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.167
sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply alarm threshold.
mcrXfpHighM52VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.168
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpLowM52VoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.169
sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply warning threshold.
mcrMgtConfSavedFlash
.1.3.6.1.4.1.1966.21.1.1.0.17
sent indicates that the configuration has been saved to flash on the
management module.
mcrXfpLowM52VoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.170
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpLowM52VoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.171
sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply alarm threshold.
mcrXfpLowM52VoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.172
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpHigh5VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.173
sent indicates that an XFP module's +5v supply current has
exceeded the high +5v supply current warning threshold.
mcrXfpHigh5VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.174
sent indicates that an XFP module's +5v supply current has
recovered to normal operating level.
mcrXfpHigh5VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.175
sent indicates that an XFP module's +5v supply current has
exceeded the high +5v supply current alarm threshold.
mcrXfpHigh5VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.176
sent indicates that an XFP module's +5v supply current has
recovered to normal operating level.
mcrXfpLow5VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.177
sent indicates that an XFP module's +5v supply current has gone
below the low +5v supply current warning threshold.
mcrXfpLow5VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.178
sent indicates that an XFP module's +5v supply current has
recovered to normal operating level.
mcrXfpLow5VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.179
sent indicates that an XFP module's +5v supply current has gone
below the low +5v supply current alarm threshold.
mcrMgtIpAddrDynChg
.1.3.6.1.4.1.1966.21.1.1.0.18
sent indicates that the system IP address has been dynamically
changed.
mcrXfpLow5VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.180
sent indicates that an XFP module's +5v supply current has
recovered to normal operating level.
mcrXfpHigh33VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.181
sent indicates that an XFP module's +3.3v supply current has
exceeded the high +3.3v supply current warning threshold.
mcrXfpHigh33VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.182
sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level.
mcrXfpHigh33VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.183
sent indicates that an XFP module's +3.3v supply current has
exceeded the high +3.3v supply current alarm threshold.
mcrXfpHigh33VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.184
sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level.
mcrXfpLow33VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.185
sent indicates that an XFP module's +3.3v supply current has gone
below the low +3.3v supply current warning threshold.
mcrXfpLow33VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.186
sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level.
mcrXfpLow33VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.187
sent indicates that an XFP module's +3.3v supply current has gone
below the low +3.3v supply current alarm threshold.
mcrXfpLow33VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.188
sent indicates that an XFP module's +3.3v supply current has
recovered to normal operating level.
mcrXfpHigh18VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.189
sent indicates that an XFP module's +1.8v supply current has
exceeded the high +1.8v supply current warning threshold.
mcrMgtTftpUploadFail
.1.3.6.1.4.1.1966.21.1.1.0.19
sent indicates that an attempt to transfer a file via TFTP, off the
management module to a remote host has failed.
mcrXfpHigh18VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.190
sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level.
mcrXfpHigh18VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.191
sent indicates that an XFP module's +1.8v supply current has
exceeded the high +1.8v supply current alarm threshold.
mcrXfpHigh18VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.192
sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level.
mcrXfpLow18VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.193
sent indicates that an XFP module's +1.8v supply current has gone
below the low +1.8v supply current warning threshold.
mcrXfpLow18VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.194
sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level.
mcrXfpLow18VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.195
sent indicates that an XFP module's +1.8v supply current has gone
below the low +1.8v supply current alarm threshold.
mcrXfpLow18VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.196
sent indicates that an XFP module's +1.8v supply current has
recovered to normal operating level.
mcrXfpHighM52VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.197
sent indicates that an XFP module's -5.2v supply current has
exceeded the high -5.2v supply current warning threshold.
mcrXfpHighM52VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.198
sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level.
mcrXfpHighM52VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.199
sent indicates that an XFP module's -5.2v supply current has
exceeded the high -5.2v supply current alarm threshold.
mcrMgtSystemBoot
.1.3.6.1.4.1.1966.21.1.1.0.2
sent indicates that the management module's system firmware is
being booted up and has completed system initialization. In some case this alert
will indicate a cold start like a user resetting the management module or
warm start if the module automatically resets because of a detected crash.
mcrMgtTftpUploadSuccess
.1.3.6.1.4.1.1966.21.1.1.0.20
sent indicates that an attempt to transfer a file via TFTP, off the
management module to a remote host was successful.
mcrXfpHighM52VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.200
sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level.
mcrXfpLowM52VCurrentWarn
.1.3.6.1.4.1.1966.21.1.1.0.201
sent indicates that an XFP module's -5.2v supply current has gone
below the low -5.2v supply current warning threshold.
mcrXfpLowM52VCurrentWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.202
sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level.
mcrXfpLowM52VCurrentAlarm
.1.3.6.1.4.1.1966.21.1.1.0.203
sent indicates that an XFP module's -5.2v supply current has gone
below the low -5.2v supply current alarm threshold.
mcrXfpLowM52VCurrentAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.204
sent indicates that an XFP module's -5.2v supply current has
recovered to normal operating level.
mcrXfpHighVCC5Warn
.1.3.6.1.4.1.1966.21.1.1.0.205
sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply warning threshold.
mcrXfpHighVCC5WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.206
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpHighVCC5Alarm
.1.3.6.1.4.1.1966.21.1.1.0.207
sent indicates that an XFP module's +5v supply has
exceeded the high +5v supply alarm threshold.
mcrXfpHighVCC5AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.208
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpLowVCC5Warn
.1.3.6.1.4.1.1966.21.1.1.0.209
sent indicates that an XFP module's +5v supply has gone
below the low +5v supply warning threshold.
mcrMgtTftpDownloadFail
.1.3.6.1.4.1.1966.21.1.1.0.21
sent indicates that an attempt to transfer a file via TFTP, from a
remote host to the management module has failed.
mcrXfpLowVCC5WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.210
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpLowVCC5Alarm
.1.3.6.1.4.1.1966.21.1.1.0.211
sent indicates that an XFP module's +5v supply has gone
below the low +5v supply alarm threshold.
mcrXfpLowVCC5AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.212
sent indicates that an XFP module's +5v supply has
recovered to normal operating level.
mcrXfpHighVCC3Warn
.1.3.6.1.4.1.1966.21.1.1.0.213
sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply warning threshold.
mcrXfpHighVCC3WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.214
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpHighVCC3Alarm
.1.3.6.1.4.1.1966.21.1.1.0.215
sent indicates that an XFP module's +3.3v supply has
exceeded the high +3.3v supply alarm threshold.
mcrXfpHighVCC3AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.216
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpLowVCC3Warn
.1.3.6.1.4.1.1966.21.1.1.0.217
sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply warning threshold.
mcrXfpLowVCC3WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.218
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpLowVCC3Alarm
.1.3.6.1.4.1.1966.21.1.1.0.219
sent indicates that an XFP module's +3.3v supply has gone
below the low +3.3v supply alarm threshold.
mcrMgtTftpDownloadSuccess
.1.3.6.1.4.1.1966.21.1.1.0.22
sent indicates that an attempt to transfer a file via TFTP, from a
remote host to the management module was successful.
mcrXfpLowVCC3AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.220
sent indicates that an XFP module's +3.3v supply has
recovered to normal operating level.
mcrXfpHighVCC2Warn
.1.3.6.1.4.1.1966.21.1.1.0.221
sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply warning threshold.
mcrXfpHighVCC2WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.222
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpHighVCC2Alarm
.1.3.6.1.4.1.1966.21.1.1.0.223
sent indicates that an XFP module's +1.8v supply has
exceeded the high +1.8v supply alarm threshold.
mcrXfpHighVCC2AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.224
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpLowVCC2Warn
.1.3.6.1.4.1.1966.21.1.1.0.225
sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply warning threshold.
mcrXfpLowVCC2WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.226
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpLowVCC2Alarm
.1.3.6.1.4.1.1966.21.1.1.0.227
sent indicates that an XFP module's +1.8v supply has gone
below the low +1.8v supply alarm threshold.
mcrXfpLowVCC2AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.228
sent indicates that an XFP module's +1.8v supply has
recovered to normal operating level.
mcrXfpHighVEE5Warn
.1.3.6.1.4.1.1966.21.1.1.0.229
sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply warning threshold.
mcrMgtChassisMismatch
.1.3.6.1.4.1.1966.21.1.1.0.23
sent indicates that the management module has been inserted into a
chassis that does not match it's Backup media converter module configuration. Backup media
module configurations will be reset to factory default.
mcrXfpHighVEE5WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.230
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpHighVEE5Alarm
.1.3.6.1.4.1.1966.21.1.1.0.231
sent indicates that an XFP module's -5.2v supply has
exceeded the high -5.2v supply alarm threshold.
mcrXfpHighVEE5AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.232
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpLowVEE5Warn
.1.3.6.1.4.1.1966.21.1.1.0.233
sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply warning threshold.
mcrXfpLowVEE5WarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.234
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrXfpLowVEE5Alarm
.1.3.6.1.4.1.1966.21.1.1.0.235
sent indicates that an XFP module's -5.2v supply has gone
below the low -5.2v supply alarm threshold.
mcrXfpLowVEE5AlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.236
sent indicates that an XFP module's -5.2v supply has
recovered to normal operating level.
mcrSfpSpeedMismatch
.1.3.6.1.4.1.1966.21.1.1.0.237
sent indicates that there is a speed mismatch between the
two SFP modules installed in the media converter.
mcrSfpSpeedMismatchRecov
.1.3.6.1.4.1.1966.21.1.1.0.238
sent indicates that the speed mismatch between the two SFP
modules has recovered.
mcrXfpPowerExceeded
.1.3.6.1.4.1.1966.21.1.1.0.239
sent indicates that an XFP module's power requirements has
exceeded card capacity.
mcrChassisAdd
.1.3.6.1.4.1.1966.21.1.1.0.24
Trap being sent indicates that a new chassis as been added to the chain of chassis.
mcrXfpPowerExceededRecov
.1.3.6.1.4.1.1966.21.1.1.0.240
Trap being sent indicates that the XFP excessive power alarm has recovered.
mcrLinkTestError
.1.3.6.1.4.1.1966.21.1.1.0.241
sent indicates that the link test running on the media
converter has detected errors.
mcrAlarmRelayEngaged
.1.3.6.1.4.1.1966.21.1.1.0.242
Trap being sent indicates that the chassis alarm relay has engaged
mcrAlarmRelayDisengaged
.1.3.6.1.4.1.1966.21.1.1.0.243
Trap being sent indicates that the chassis alarm relay has disengaged
mcrBandwidthLevelUpstreamLow
.1.3.6.1.4.1.1966.21.1.1.0.244
sent indicates the media port is in a low upstream bandwidth condition. This happens when the bandwidth
is below the configured threshold.
mcrBandwidthLevelUpstreamRecov
.1.3.6.1.4.1.1966.21.1.1.0.245
Trap being sent indicates the media port has recovered from a low upstream bandwidth condition.
mcrBandwidthLevelDownstreamLow
.1.3.6.1.4.1.1966.21.1.1.0.246
sent indicates the media port is in a low downstream bandwidth condition. This happens when the bandwidth
is below the configured threshold.
mcrBandwidthLevelDownstreamRecov
.1.3.6.1.4.1.1966.21.1.1.0.247
Trap being sent indicates the media port has recovered from a low downstream bandwidth condition.
mcrMediaRemoteReset
.1.3.6.1.4.1.1966.21.1.1.0.248
sent indicates that the media converter module's peer has been manually reset by a user
managing the unit.
mcrChassisRemove
.1.3.6.1.4.1.1966.21.1.1.0.25
sent indicates that that a chassis has been removed from the chain of
chassis.
mcrChassisReset
.1.3.6.1.4.1.1966.21.1.1.0.26
sent indicates that the chassis back-plane has been manually reset by
a user managing the unit.
mcrChassisTemperatureAlarm
.1.3.6.1.4.1.1966.21.1.1.0.27
sent indicates that the chassis temperature has exceeded the configured
high temperature threshold temperature.
mcrChassisTemperatureRecover
.1.3.6.1.4.1.1966.21.1.1.0.28
sent indicates that the chassis temperature has recovered back to
normal operating temperature.
mcrChassisSlotPoweredOn
.1.3.6.1.4.1.1966.21.1.1.0.29
sent indicates that the chassis slot has been powered off either manually
or through the configured chassis slot power schedule.
mcrMgtReset
.1.3.6.1.4.1.1966.21.1.1.0.3
sent indicates that the management module has been manually reset
via the reset button or one of the managers.
mcrChassisSlotPoweredOff
.1.3.6.1.4.1.1966.21.1.1.0.30
sent indicates that the chassis slot has been powered on either manually
or through the configured chassis slot power schedule.
mcrChassisFail
.1.3.6.1.4.1.1966.21.1.1.0.31
sent indicates that the management module has detected a failure
condition in the chassis.
mcrChassisOk
.1.3.6.1.4.1.1966.21.1.1.0.32
sent indicates that the chassis has recovered from a failure
and is now operating normally.
mcrPsmuInserted
.1.3.6.1.4.1.1966.21.1.1.0.33
Trap being sent indicates that a power supply has been inserted into the chassis.
mcrPsmuRemoved
.1.3.6.1.4.1.1966.21.1.1.0.34
Trap being sent indicates that a power supply's has been removed from the chassis.
mcrPsmuPsuFail
.1.3.6.1.4.1.1966.21.1.1.0.35
sent indicates that the power supply has failed it's self-test
diagnostics.
mcrPsmuPsuOk
.1.3.6.1.4.1.1966.21.1.1.0.36
sent indicates that the power supply has passed it's self-test
diagnostics.
mcrPsmuPsuVoltageFail
.1.3.6.1.4.1.1966.21.1.1.0.37
sent indicates that the voltage being supplied by the indicated
power supply is insufficient.
mcrPsmuPsuVoltageOk
.1.3.6.1.4.1.1966.21.1.1.0.38
sent indicates that the voltage being supplied by the indicated
power supply is now in the normal operating range.
mcrPsmuFanFail
.1.3.6.1.4.1.1966.21.1.1.0.39
Trap being sent indicates that the fan has failed.
mcrMgtResetFactory
.1.3.6.1.4.1.1966.21.1.1.0.4
sent indicates that the management module has been manually reset
to factory by holding the reset button for 3 or more seconds, or one of the
managers. This means that any files downloaded to the management module will
be erase and the management configuration file is reset back to the default
configuration.
mcrPsmuFanOk
.1.3.6.1.4.1.1966.21.1.1.0.40
Trap being sent indicates that the fan currently operating normally.
mcrMediaInserted
.1.3.6.1.4.1.1966.21.1.1.0.42
Trap being sent indicates that a media converter module has been inserted into the chassis.
mcrMediaRemoved
.1.3.6.1.4.1.1966.21.1.1.0.43
Trap being sent indicates that a media converter module has been removed from the chassis.
mcrMediaReset
.1.3.6.1.4.1.1966.21.1.1.0.44
sent indicates that the media converter module has been manually reset by a user
managing the unit.
mcrMediaLostCommunication
.1.3.6.1.4.1.1966.21.1.1.0.45
sent indicates that the management module can no longer communicate
with the media converter module
mcrMediaRecovCommunication
.1.3.6.1.4.1.1966.21.1.1.0.46
sent indicates that the management module recovered communication
with a media converter module
mcrMediaFail
.1.3.6.1.4.1.1966.21.1.1.0.47
sent indicates that the media converter module has failed its self-test
diagnostics
mcrMediaOk
.1.3.6.1.4.1.1966.21.1.1.0.48
sent indicates that the media converter module has passed its self-test
diagnostics
mcrMediaLinkUp
.1.3.6.1.4.1.1966.21.1.1.0.49
sent indicates that the current link status of the Fiber or Copper
port on the media converter module is up.
mcrMgtEtheLinkUp
.1.3.6.1.4.1.1966.21.1.1.0.5
sent indicates that the current link status of the Ethernet
port on the management module is up.
mcrMediaLinkDown
.1.3.6.1.4.1.1966.21.1.1.0.50
sent indicates that the current link status of the Fiber or Copper
port on the media converter module is down.
mcrMediaConfUpdateFail
.1.3.6.1.4.1.1966.21.1.1.0.51
sent indicates that the configuration update on the media converter module
has failed.
mcrMediaConfUpdateSuccess
.1.3.6.1.4.1.1966.21.1.1.0.52
sent indicates that the configuration update on the media converter module
was successful. The media converter module configuration can be updated manually or automatically.
mcrMediaConfMismatch
.1.3.6.1.4.1.1966.21.1.1.0.53
sent indicates that a chassis slot is configured with Backup/Restore
and the media converter module type configured for the slot does not match the media converter module
type inserted into the slot.
mcrMediaConfMismatchResolv
.1.3.6.1.4.1.1966.21.1.1.0.54
sent indicates that a user has taken action to resolved media converter module
configuration mismatch
mcrMediaFirmwareUpdateFail
.1.3.6.1.4.1.1966.21.1.1.0.55
Trap being sent indicates that an attempt to update a media converter module's firmware has Failed.
mcrMediaFirmwareUpdateSuccess
.1.3.6.1.4.1.1966.21.1.1.0.56
Trap being sent indicates that an attempt to update a media converter module's firmware was successful.
mcrSfpInserted
.1.3.6.1.4.1.1966.21.1.1.0.57
Trap being sent indicates that a SFP module has been inserted into a media converter module
mcrSfpRemoved
.1.3.6.1.4.1.1966.21.1.1.0.58
Trap being sent indicates that a SFP module has been removed from a media converter module
mcrSfpHighTempWarn
.1.3.6.1.4.1.1966.21.1.1.0.59
sent indicates that a SFP module's temperature has exceeded the high
temperature warning threshold.
mcrMgtEtheLinkDown
.1.3.6.1.4.1.1966.21.1.1.0.6
sent indicates that the current link status of the Ethernet
port on the management module is down.
mcrSfpHighTempWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.60
sent indicates that a SFP module's temperature has recovered to normal
operating level.
mcrSfpHighTempAlarm
.1.3.6.1.4.1.1966.21.1.1.0.61
sent indicates that a SFP module's temperature has exceeded the high
temperature alarm threshold.
mcrSfpHighTempAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.62
sent indicates that a SFP module's temperature has recovered to normal
operating level.
mcrSfpLowTempWarn
.1.3.6.1.4.1.1966.21.1.1.0.63
sent indicates that a SFP module's temperature has gone below the low
temperature warning threshold.
mcrSfpLowTempWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.64
sent indicates that a SFP module's temperature has recovered to normal
operating level.
mcrSfpLowTempAlarm
.1.3.6.1.4.1.1966.21.1.1.0.65
sent indicates that a SFP module's temperature has gone below the low
temperature alarm threshold.
mcrSfpLowTempAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.66
sent indicates that a SFP module's temperature has recovered to normal
operating level.
mcrSfpHighVoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.67
sent indicates that a SFP module's voltage has exceeded the high
voltage warning threshold.
mcrSfpHighVoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.68
sent indicates that a SFP module's voltage has recovered to normal
operating level.
mcrSfpHighVoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.69
sent indicates that a SFP module's voltage has exceeded the high
voltage alarm threshold.
mcrMgtConMonDSRSigChg
.1.3.6.1.4.1.1966.21.1.1.0.7
sent indicates that monitor console DSR is configured and the
status of one of these signal has changed on the console port.
mcrSfpHighVoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.70
sent indicates that a SFP module's voltage has recovered to normal
operating level.
mcrSfpLowVoltWarn
.1.3.6.1.4.1.1966.21.1.1.0.71
sent indicates that a SFP module's voltage has gone below the low
voltage warning threshold.
mcrSfpLowVoltWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.72
sent indicates that a SFP module's voltage has recovered to normal
operating level.
mcrSfpLowVoltAlarm
.1.3.6.1.4.1.1966.21.1.1.0.73
sent indicates that a SFP module's voltage has gone below the low
voltage alarm threshold.
mcrSfpLowVoltAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.74
sent indicates that a SFP module's voltage has recovered to normal
operating level.
mcrSfpHighTxBiasWarn
.1.3.6.1.4.1.1966.21.1.1.0.75
sent indicates that a SFP module's TX Bias current has exceeded the high
TX Bias current warning threshold.
mcrSfpHighTxBiasWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.76
sent indicates that a SFP module's TX Bias current has recovered to normal
operating level.
mcrSfpHighTxBiasAlarm
.1.3.6.1.4.1.1966.21.1.1.0.77
sent indicates that a SFP module's TX Bias current has exceeded the high
TX Bias current alarm threshold.
mcrSfpHighTxBiasAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.78
sent indicates that a SFP module's TX Bias current has recovered to normal
operating level.
mcrSfpLowTxBiasWarn
.1.3.6.1.4.1.1966.21.1.1.0.79
sent indicates that a SFP module's TX Bias current has gone below the low
Tx Bias current warning threshold.
mcrMgtAuthFail
.1.3.6.1.4.1.1966.21.1.1.0.8
sent indicates that a user failed authentication via Telnet, SSH,
WebManager, SNMP or the serial console.
mcrSfpLowTxBiasWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.80
sent indicates that a SFP module's TX Bias current has recovered to normal
operating level.
mcrSfpLowTxBiasAlarm
.1.3.6.1.4.1.1966.21.1.1.0.81
sent indicates that a SFP module's TX Bias current has gone below the low
Tx Bias current alarm threshold.
mcrSfpLowTxBiasAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.82
sent indicates that a SFP module's TX Bias current has recovered to normal
operating level.
mcrSfpHighTxPowerWarn
.1.3.6.1.4.1.1966.21.1.1.0.83
sent indicates that a SFP module's TX power has exceeded the high
TX power warning threshold.
mcrSfpHighTxPowerWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.84
sent indicates that a SFP module's TX power has recovered to normal
operating level.
mcrSfpHighTxPowerAlarm
.1.3.6.1.4.1.1966.21.1.1.0.85
sent indicates that a SFP module's TX power has exceeded the high
TX power alarm threshold.
mcrSfpHighTxPowerAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.86
sent indicates that a SFP module's TX power has recovered to normal
operating level.
mcrSfpLowTxPowerWarn
.1.3.6.1.4.1.1966.21.1.1.0.87
sent indicates that a SFP module's TX power has gone below the low
TX power warning threshold.
mcrSfpLowTxPowerWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.88
sent indicates that a SFP module's TX power has recovered to normal
operating level.
mcrSfpLowTxPowerAlarm
.1.3.6.1.4.1.1966.21.1.1.0.89
sent indicates that a SFP module's TX power has gone below the low
TX power alarm threshold.
mcrMgtAuthSuccess
.1.3.6.1.4.1.1966.21.1.1.0.9
sent indicates that a user failed authentication via Telnet, SSH,
WebManager or the serial console.
mcrSfpLowTxPowerAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.90
sent indicates that a SFP module's TX power has recovered to normal
operating level.
mcrSfpHighRxPowerWarn
.1.3.6.1.4.1.1966.21.1.1.0.91
sent indicates that a SFP module's RX power has exceeded the high
RX power warning threshold.
mcrSfpHighRxPowerWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.92
sent indicates that a SFP module's RX power has recovered to normal
operating level.
mcrSfpHighRxPowerAlarm
.1.3.6.1.4.1.1966.21.1.1.0.93
sent indicates that a SFP module's RX power has exceeded the high
RX power alarm threshold.
mcrSfpHighRxPowerAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.94
sent indicates that a SFP module's RX power has recovered to normal
operating level.
mcrSfpLowRxPowerWarn
.1.3.6.1.4.1.1966.21.1.1.0.95
sent indicates that a SFP module's RX power has gone below the low
RX power warning threshold.
mcrSfpLowRxPowerWarnRecov
.1.3.6.1.4.1.1966.21.1.1.0.96
sent indicates that a SFP module's RX power has recovered to normal
operating level.
mcrSfpLowRxPowerAlarm
.1.3.6.1.4.1.1966.21.1.1.0.97
sent indicates that a SFP module's RX power has gone below the low
RX power alarm threshold.
mcrSfpLowRxPowerAlarmRecov
.1.3.6.1.4.1.1966.21.1.1.0.98
sent indicates that a SFP module's RX power has recovered to normal
operating level.
mcrChassisCommTempSensorFail
.1.3.6.1.4.1.1966.21.1.1.0.99
sent indicates that communication with the chassis temperature
sensor has failed. The current chassis temperature reading will be unknown
AlertSeverityLevel
perle 
mcrChassisTable 
mcrChassisEntry 
mcrChassisIndex 
systemStatus 
mcrMgtModuleInserted