PERLE-MCR-MGT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
62
Rows
62
Columns
1,157
mcrChassisTable
table
.1.3.6.1.4.1.1966.21.1.1.1.1.1
·
1 row entry
·
12 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrChassisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrChassisTable'
Table of chassis diagnostic type information.
Entries of the table, each relating to a separate chassis.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the chassis number.
|
SNMPv2-SMIUnsigned32 Enumerated Values:
Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.1 |
||||||||||||||
|
This object identifies the name of the chassis model. For
the 2-slot chassis, this is the product model. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.2 |
||||||||||||||
|
This object identifies a static description of the chassis.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.3 |
||||||||||||||
|
This object identifies the chassis serial number.
For the 2-slot chassis, this is writeable (and user-defined). For other chassis, this is read-only (and reflects the chassis' actual serial number). |
OctetStringr/w Constraints: range: -2147483648-2147483647range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.4 |
||||||||||||||
|
This object identifies the chassis bootloader version.
(Not applicable to 2-slot chassis.) |
SNMPv2-TCDisplayString Constraints: range: -2147483648-2147483647Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.5 |
||||||||||||||
|
This object identifies the chassis firmware version.
(Not applicable to 2-slot chassis.) |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.6 |
||||||||||||||
|
This object identifies the number of outstanding warnings and alarms for
this chassis. If this value is not zero then user intervention is needed to resolve the outstanding warnings and alarms. (Not applicable to 2-slot… |
SNMPv2-SMIUnsigned32 Enumerated Values:
Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.7 |
||||||||||||||
|
This object identifies the chassis self-test diagnostics result.
It will return zero if it passed and non-zero error code if it failed. The following are possible non-zero error codes: 1 - Firmware download required … |
SNMPv2-SMIUnsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.8 |
||||||||||||||
|
This object identifies the current temperature of the chassis. The
temperature returned will be either Celsius or Fahrenheit based on your current regional display settings. If the temperature returned is -1 then a pro… |
SNMPv2-SMIInteger32 Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.9 |
||||||||||||||
|
This object identifies the chassis temperature high threshold. If the
chassis temperature exceeds this threshold then an alert will be generated. The value read/written will be either Celsius or Fahrenheit based on your… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.10 |
||||||||||||||
|
This object allows the resetting of the chassis (all modules). Reading this
object always returns 0. |
YesNoValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.11 |
||||||||||||||
|
For the 2-slot chassis, this is the configured slot index of the
management module. This value only needs to be changed if the management module is physically installed in slot 2, rather than slot 1. The management mo… |
Unsigned32r/w Constraints: range: 1-2 |
.1.3.6.1.4.1.1966.21.1.1.1.1.1.1.12 |
mcrPsmuTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.2
·
1 row entry
·
12 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrPsmuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrPsmuTable'
Table of PSMU (Power Supply Monitoring Unit) diagnostic type information. (Not applicable to 2-slot chassis.)
Entries of the table, each relating to a separate PSMU.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the PSMU bay as either A or B.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.2 |
||||||||
|
This object identifies the PSMU model.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.3 |
||||||||
|
This object identifies a static description of the power supply model
present in the chassis |
SNMPv2-TCDisplayString Constraints: range: -2147483648-2147483647Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.4 |
||||||||
|
This object identifies the PSU serial number.
|
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.5 |
||||||||
|
This object identifies the PSMU bootloader version.
|
SNMPv2-TCDisplayString Enumerated Values:
Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.6 |
||||||||
|
This object identifies the PSMU firmware version.
|
SNMPv2-TCDisplayString Constraints: range: -2147483648-2147483647Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.7 |
||||||||
|
This object identifies the number of outstanding warnings and alarms for
this chassis. If this value is not zero then user intervention is needed to resolve the outstanding warnings and alarms |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.8 |
||||||||
|
This object identifies if the PSMU power supply unit (PSU) status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.9 |
||||||||
|
This object identifies the current PSU voltage being supplied.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.10 |
||||||||
|
This object identifies power currently being supplied to the chassis,
in milliwatts. A value of 0 indicate that the power supply is not in use |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.11 |
||||||||
|
This object identifies the fan status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.12 |
||||||||
|
This object identifies the speed of the fan in RPM.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.2.1.13 |
mcrChassisSlotTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.3
·
1 row entry
·
18 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrChassisSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrChassisSlotTable'
Table of chassis slot configuration, status and diagnostic type information.
Entries of the table, each relating to a separate slot in a chassis.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the chassis slot number.
|
SlotNumber Enumerated Values:
Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.2 |
||||||||||||||||
|
This object identifies the user defined name of the module inserted
in the slot. The default name is the model name of the media converter module |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.3 |
||||||||||||||||
|
This object identifies the model name of the module inserted
in the slot. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.4 |
||||||||||||||||
|
This object identifies the user defined name for an unmanaged
module inserted in the slot. Unmanaged modules include all perle C-1000, C-100, C-1110 and c-110 type modules. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.5 |
||||||||||||||||
|
This object identifies the serial number of the module inserted
in the slot. |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.6 |
||||||||||||||||
|
This object identifies the bootloader version of the module inserted
in the slot. |
SNMPv2-TCDisplayString Enumerated Values:
Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.7 |
||||||||||||||||
|
This object identifies the firmware version of the module inserted
in the slot. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.8 |
||||||||||||||||
|
This object identifies the number of outstanding warnings and alarms for
this module. If this value is not zero then user intervention is needed to resolve the outstanding warnings and alarms |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.9 |
||||||||||||||||
|
This object identifies the module's self-test diagnostics result. It will
return zero if it passed and non-zero error code if the module has failed.The following are possible non-zero error codes: 1 - Media converter m… |
SNMPv2-SMIInteger32 Enumerated Values:
Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.10 |
||||||||||||||||
|
This object identifies the module type inserted for this chassis slot.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.3.1.11 |
||||||||||||||||
|
This object is applicable to media converter modules only. It identifies
whether the media configuration will be automatically backed up to or restored from the management card's non-volatile memory |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.3.1.12 |
||||||||||||||||
|
This object identifies the media converter module type of the configuration that
was backed up for the slot on the management card's non-volatile memory when the mcrMediaConfigBackupRestore object was enabled. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.3.1.13 |
||||||||||||||||
|
This object identifies the default power state of the slot when the
chassis is initially powered up. The current power state of the slot can be manually changed by writing to mcrCurrentPowerState object or dynamically … |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.14 |
||||||||||||||||
|
Writing this object allows the current power state of the slot to be
turned on or off. This object is not writable for management modules or the 2-slot chassis. Reading this object will return the current slot power sta… |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.15 |
||||||||||||||||
|
This object is not applicable to management modules. It identifies
if power schedule is enabled for the slot. (Not applicable to 2-slot chassis.) |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.3.1.16 |
||||||||||||||||
|
This object allows you to reset the module inserted in the slot.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.17 |
||||||||||||||||
|
This object allows you to reset to factory the module inserted in
the slot. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.3.1.18 |
||||||||||||||||
|
This object identifies a static description of the media converter module present
in the slot. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.3.1.19 |
cm1000FixedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1
·
1 row entry
·
27 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1000FixedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1000FixedTable'
Table of CM-1000 type media converter module's status type information.
Entries of the table, each relating to a separate CM-1000 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1000 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.2 |
||||||||||||||||
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Enumerated Values:
Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.3 |
||||||||||||||||
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.4 |
||||||||||||||||
|
This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configurat… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.5 |
||||||||||||||||
|
Media converter module's current switch setting for fiber Auto-Negotiation.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.6 |
||||||||||||||||
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.7 |
||||||||||||||||
|
Media converter module's current switch setting for Fiber Fault Alert.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.8 |
||||||||||||||||
|
Media converter module's current switch setting for copper duplex.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.9 |
||||||||||||||||
|
Media converter module's current switch setting for copper pause (flow control).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.10 |
||||||||||||||||
|
Media converter module's current switch setting for fiber loopback mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.11 |
||||||||||||||||
|
Media converter module's current fiber link status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.12 |
||||||||||||||||
|
Media converter module's fiber port connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.13 |
||||||||||||||||
|
Media converter module's current fiber auto-negotiation state.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.14 |
||||||||||||||||
|
Media converter module's fiber port speed in megabits per second.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.15 |
||||||||||||||||
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.16 |
||||||||||||||||
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.17 |
||||||||||||||||
|
Media converter module's fiber Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.18 |
||||||||||||||||
|
This object identifies the status of whether light is being received
on the fiber port |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.19 |
||||||||||||||||
|
Media converter module's current fiber loopback mode setting. Writing to this
object will change the current settings. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitche… |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.20 |
||||||||||||||||
|
Media converter module's current copper link status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.21 |
||||||||||||||||
|
Media converter module's copper connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.22 |
||||||||||||||||
|
Media converter module's current copper auto-negotiation state.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.23 |
||||||||||||||||
|
Media converter module's copper port speed in megabits per second.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.24 |
||||||||||||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be i… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.25 |
||||||||||||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned should b… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.26 |
||||||||||||||||
|
If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.27 |
||||||||||||||||
|
Media converter module's copper Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.1.1.28 |
cm1000ConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2
·
1 row entry
·
14 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1000ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1000ConfigTable'
Table of CM-1000 type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-1000 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1000 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.2 |
||||||||||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.3 |
||||||||||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Enumerated Values:
Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.4 |
||||||||||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.5 |
||||||||||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.6 |
||||||||||||||||
|
This object identifies the Jumbo Packet setting for the media converter module
present in the chassis. |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.7 |
||||||||||||||||
|
This object identifies a user definable name for the fiber port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.8 |
||||||||||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.9 |
||||||||||||||||
|
This object identifies the wither fiber auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.10 |
||||||||||||||||
|
This object identifies a user definable name for the copper port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.11 |
||||||||||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.12 |
||||||||||||||||
|
This object identifies the duplex settings for the copper port.
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.13 |
||||||||||||||||
|
This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrical TX or advertise symmetrical and asymmetrical RX. This obje… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.14 |
||||||||||||||||
|
This object identifies the copper low power setting for the media converter module
present in the chassis. |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.2.1.15 |
cm1000LedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1000LedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1000LedTable'
Table of CM-1000 type media converter module's LED status information.
Entries of the table, each relating to a separate CM-1000 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The Slot number the CM-1000 type module is currently inserted
|
SlotNumber Enumerated Values:
Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.2 |
||||
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Fi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.3 |
||||
|
This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.4 |
||||
|
This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are: off(0) - No copper link on(1) - Copper link present |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.1.3.1.5 |
cm100FixedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1
·
1 row entry
·
24 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm100FixedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm100FixedTable'
Table of CM-100 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1000 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-100 type module is currently inserted
|
SlotNumber Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.2 |
||||||
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Enumerated Values:
Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.3 |
||||||
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Enumerated Values:
Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.4 |
||||||
|
This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.5 |
||||||
|
This object identifies the media converter module's hardware Auto MDIX jumper
settings. |
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.6 |
||||||
|
Media converter module's current switch setting for fiber Auto-Negotiation.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.7 |
||||||
|
Media converter module's current switch setting for Link Mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.8 |
||||||
|
Media converter module's current switch setting for Far End Fault.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.9 |
||||||
|
Media converter module's current switch setting for copper pause (flow control).
|
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.10 |
||||||
|
Media converter module's current switch setting for fiber loopback mode.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.11 |
||||||
|
Media converter module's current fiber link status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.12 |
||||||
|
Media converter module's fiber port connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.13 |
||||||
|
Media converter module's fiber port speed in megabits per second.
|
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.14 |
||||||
|
Media converter module's current fiber Far End Fault status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.15 |
||||||
|
This object identifies the status of whether light is being received
on the fiber port |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.16 |
||||||
|
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.17 |
||||||
|
Media converter module's current copper link status.
|
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.18 |
||||||
|
Media converter module's copper connector type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.19 |
||||||
|
Media converter module's current copper auto-negotiation state.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.20 |
||||||
|
This object identifies the copper port speed in megabits per second.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.21 |
||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be i… |
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.22 |
||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned should b… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.23 |
||||||
|
If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control) setting. If auto-negotiation is not complete then the value return… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.24 |
||||||
|
Media converter module's copper Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.1.1.25 |
cm100ConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2
·
1 row entry
·
12 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm100ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm100ConfigTable'
Table of CM-100 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1000 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1000 type module is currently inserted
|
SlotNumber Enumerated Values:
Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Constraints: range: 0-15Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: -2147483648-2147483647range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.5 |
||||||||
|
This object identifies the fiber Far End Fault setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough. This object is read-only if the media converter module's ConfigMode jum… |
EnableDisableValuer/w Constraints: range: -2147483648-2147483647Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.6 |
||||||||
|
This object identifies a user definable name for the fiber port.
|
OctetStringr/w Enumerated Values:
Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.7 |
||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.8 |
||||||||
|
This object identifies a user definable name for the copper port.
|
OctetStringr/w Enumerated Values:
Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.9 |
||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.10 |
||||||||
|
This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.11 |
||||||||
|
This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.12 |
||||||||
|
This object identifies the copper's port pause (flow control) settings.
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.2.1.13 |
cm100LedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm100LedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm100LedTable'
Table of CM-100 type media converter module's LED status information.
Entries of the table, each relating to a separate CM-100 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-100 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Fi… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.3 |
|
This object identifies the status of the link fiber (LKF) LED on the media converter module.
Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.4 |
|
This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are: off(0) - No copper link on(1) - Copper link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.2.3.1.5 |
cm1110RateConvTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1
·
1 row entry
·
32 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1110RateConvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1110RateConvTable'
Table of CM-1110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.2 |
||||||||||
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.3 |
||||||||||
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.4 |
||||||||||
|
This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.5 |
||||||||||
|
This object identifies the media converter module's hardware Auto MDIX jumper
settings. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.6 |
||||||||||
|
Media converter module's current switch setting for copper Auto-Negotiation.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.7 |
||||||||||
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.8 |
||||||||||
|
Media converter module's current switch setting for Fiber Fault Alert.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.9 |
||||||||||
|
Media converter module's current switch setting for copper duplex.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.10 |
||||||||||
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.11 |
||||||||||
|
Media converter module's current switch setting for fiber Auto-Ngotiation.
This object is not applicable if there is a 100 Mbps SFP modules inserted. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.12 |
||||||||||
|
Media converter module's current switch setting for fiber duplex if a 100 Mbps
SFP module is inserted. Otherwise this object is not applicable. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.13 |
||||||||||
|
Media converter module's current switch setting for fiber loopback mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.14 |
||||||||||
|
Media converter module's current fiber link status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.15 |
||||||||||
|
Media converter module's fiber port connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.16 |
||||||||||
|
Media converter module's current fiber auto-negotiation state. This object is
not applicable if the fiber connector type is a 100 Mbps SFP module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.17 |
||||||||||
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ign… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.18 |
||||||||||
|
This object identifies the current fiber port duplex state.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.19 |
||||||||||
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.20 |
||||||||||
|
Media converter module's fiber Link Partner Remote Fault status. This object
is not applicable if there is a 100 Mbps SFP module inserted. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.21 |
||||||||||
|
Media converter module's current fiber Far End Fault status if a 100 Mbps SFP
module is inserted. Otherwise this object is not applicable. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.22 |
||||||||||
|
This object identifies the status of whether light is being received
on the fiber port |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.23 |
||||||||||
|
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). |
EnableDisableValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.24 |
||||||||||
|
Media converter module's current copper link status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.25 |
||||||||||
|
Media converter module's copper connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.26 |
||||||||||
|
Media converter module's current copper auto-negotiation state.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.27 |
||||||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.28 |
||||||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be i… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.29 |
||||||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned should b… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.30 |
||||||||||
|
If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.31 |
||||||||||
|
Media converter module's copper Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.32 |
||||||||||
|
This object identifies the status of the copper auto speed downshift
feature. noDownshift indicates that an automatic downshift of the copper speed has not occurred. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.1.1.33 |
cm1110ConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2
·
1 row entry
·
76 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1110ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1110ConfigTable'
Table of CM-1110 type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.2 |
||||||||||||||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.3 |
||||||||||||||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Enumerated Values:
Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.4 |
||||||||||||||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.5 |
||||||||||||||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. For 100 Mbps SFP modules, this setting is always effectively enabled if Link Mode is set to smartLinkPassthrough. This object is read-only if th… |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.6 |
||||||||||||||||||||
|
This object identifies the media converter module's maximum packet size setting
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.7 |
||||||||||||||||||||
|
This object identifies a user definable name for the fiber port.
|
OctetStringr/w Enumerated Values:
Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.8 |
||||||||||||||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.9 |
||||||||||||||||||||
|
This object identifies whether fiber auto-negotiation is enabled.
This object does not apply if the fiber connector type is a 100 Mbps SFP module. This object is read-only if the media converter module's ConfigMode ju… |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.10 |
||||||||||||||||||||
|
If the fiber connector type is SFP and it is a 100 Mbps fiber module then
this object identifies the duplex setting for the 100 Mbps fiber port. Duplex for 1000 Mbps has to be auto negotiated. This object is read-only i… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.11 |
||||||||||||||||||||
|
This object identifies a user definable name for the copper port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.12 |
||||||||||||||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.13 |
||||||||||||||||||||
|
This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.14 |
||||||||||||||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.15 |
||||||||||||||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.16 |
||||||||||||||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.17 |
||||||||||||||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.18 |
||||||||||||||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 1000Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.19 |
||||||||||||||||||||
|
If copper auto-negotiation is disabled then this object identifies
the configured cooper speed. 1000 Mbps speed can only be auto negotiated. If copper auto-negotiation is enabled then this object is ignored. This objec… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.20 |
||||||||||||||||||||
|
If copper auto-negotiation is disabled then this object identifies
the duplex setting for 10 & 100 Mbps for the copper port. Duplex for 1000 Mbps has to be auto negotiated. This object is read-only if the media convert… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.21 |
||||||||||||||||||||
|
This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.22 |
||||||||||||||||||||
|
This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrical TX or advertise symmetrical and asymmetrical RX. This obje… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.23 |
||||||||||||||||||||
|
This object identifies the number of times the PHY attempts to
establish a Gigabit link before the PHY downshift to the next highest speed. A value of 0 indicates the auto downshift is disabled |
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.24 |
||||||||||||||||||||
|
When using cable exceeding 100 meters in 10BASE-T mode this feature
should be set to extended(1). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.25 |
||||||||||||||||||||
|
Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.26 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Enumerated Values:
Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.27 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.28 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.29 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.30 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Enumerated Values:
Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.31 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.32 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.33 |
||||||||||||||||||||
|
Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.34 |
||||||||||||||||||||
|
Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.35 |
||||||||||||||||||||
|
Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.36 |
||||||||||||||||||||
|
Configure priority precedence.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.37 |
||||||||||||||||||||
|
Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.38 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.39 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Enumerated Values:
Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.40 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.41 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.42 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.43 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Enumerated Values:
Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.44 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Enumerated Values:
Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.45 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.46 |
||||||||||||||||||||
|
Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.47 |
||||||||||||||||||||
|
Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.48 |
||||||||||||||||||||
|
Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.49 |
||||||||||||||||||||
|
Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.50 |
||||||||||||||||||||
|
Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.51 |
||||||||||||||||||||
|
Set the default frame priority.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.52 |
||||||||||||||||||||
|
Set the default tagging action.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.53 |
||||||||||||||||||||
|
Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.54 |
||||||||||||||||||||
|
Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.55 |
||||||||||||||||||||
|
Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.56 |
||||||||||||||||||||
|
Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.57 |
||||||||||||||||||||
|
Configure priority precedence.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.58 |
||||||||||||||||||||
|
Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.59 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.60 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.61 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Enumerated Values:
Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.62 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Enumerated Values:
Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.63 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.64 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.65 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.66 |
||||||||||||||||||||
|
Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Enumerated Values:
Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.67 |
||||||||||||||||||||
|
Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.68 |
||||||||||||||||||||
|
Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.69 |
||||||||||||||||||||
|
Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.70 |
||||||||||||||||||||
|
Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.71 |
||||||||||||||||||||
|
Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Enumerated Values:
Constraints: range: 0-4095 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.72 |
||||||||||||||||||||
|
Set the default frame priority.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: -2147483648-2147483647range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.73 |
||||||||||||||||||||
|
Set the default tagging action.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.74 |
||||||||||||||||||||
|
Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.75 |
||||||||||||||||||||
|
Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.76 |
||||||||||||||||||||
|
This object identifies whether fiber SGMII interface is enabled.
|
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.2.1.77 |
cm1110LedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3
·
1 row entry
·
7 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1110LedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1110LedTable'
Table of CM-1110 type media converter module's LED status information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.2 |
||||||||||||||
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Fi… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.3 |
||||||||||||||
|
This object identifies the status of the Full Duplex Fiber (FDF) LED
on the media converter module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.4 |
||||||||||||||
|
This object identifies the status of the link fiber (LKF) LED on the
media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.5 |
||||||||||||||
|
This object identifies the status of the link copper speed (100/1000)
LED on the management module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.6 |
||||||||||||||
|
This object identifies the status of the Full Duplex Copper (FDC) LED
on the media converter module. |
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.7 |
||||||||||||||
|
This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are: off(0) - No copper link on(1) - Copper link present |
Enumeration Constraints: range: -2147483648-2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.3.1.8 |
cm1110RateConvStatsTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4
·
1 row entry
·
38 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1110RateConvStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1110RateConvStatsTable'
Table of CM-1110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.2 |
||||||
|
Media converter module port index indicating which media port the statistical
counters are associated with. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.3 |
||||||
|
A counter that counts the number of good, non-filtered frames that
normally would have been forwarded, but could not due to lack of buffer space. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.4 |
||||||
|
A counter that counts the number of good frames that were filtered
due to ingress switch policy rules. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.5 |
||||||
|
An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.6 |
||||||
|
An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. This object is a 64-bit version of cm1110PortInGoodOctets. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.7 |
||||||
|
An ingress counter that is the sum of lengths of all bad Ethernet
frames received on the media port.. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.8 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Unicast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.9 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Broadcast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.10 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Multicast destination MAC address. This count does not include frames counted in the cm1110PortInPauses or the cm1110PortInBroadcasts objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.11 |
||||||
|
An ingress counter that counts the number of good frames reachieved that
have a Pause destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.12 |
||||||
|
An ingress counter that counts the number of frames received with a
length less that 64 octets but with a valid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.13 |
||||||
|
An ingress counter that counts the number of frames received with a
length less that 64 octets and an invalid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.14 |
||||||
|
An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a valid FCS. The maximum packet size can be set using the cm1110ConfigMaxPacketsSize object. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.15 |
||||||
|
An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a invalid FCS. The maximum packet size can be set using the cm1110ConfigMaxPacketsSize object. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.16 |
||||||
|
An ingress counter that counts the number of frames received with an
RxErr signal from the PHY. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.17 |
||||||
|
An ingress counter that counts the number of frames received with a
CRC error not counted in the cm1110PortInFragments, cm1110PortInFcsErr, or the cm1110PortInRxErr objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.18 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of exactly 64 Octets, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.19 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 65 and 127 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.20 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 128 and 255 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.21 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 256 and 511 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.22 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 512 and 1023 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.23 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 1024 and maximum packet size octets inclusive, including those with errors. The maximum packet size can be set using… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.24 |
||||||
|
An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.25 |
||||||
|
An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. This object is a 64-bit version of cm1110PortOutOctets. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.26 |
||||||
|
A counter that counts the number of good frames that were filtered
due to egress switch policy rules. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.27 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Unicast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.28 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Broadcast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.29 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Multicast destination MAC address. This count does not include frames counted in the cm1110PortOutPauses or the cm1110PortOutBroadcasts objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.30 |
||||||
|
An Egress counter that counts the number of good frames reachieved that
have a Pause destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.31 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced no collisions but are delayed because the medium was busy during the first attempt. This counter is applicable in half-duplex … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.32 |
||||||
|
An Egress counter that counts the number of collision events seen by
the MAC not including those counted in cm1110PortSingles, cm1110PortMultiple , cm1110PortExcessives or cm1110PortLates objects. This counter is applic… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.33 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced exactly one collision. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.34 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced more than one collision. This counter is aplicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.35 |
||||||
|
An Egress counter that counts the number frames dropped in the transmit
MAC because the frame experienced 16 consecutive collisions. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.36 |
||||||
|
An Egress counter that counts the number times a collision is detected
later than 512 bits-times into the transmission of a frame. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.37 |
||||||
|
An Egress counter that counts the number frames transmitted with an
invalid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.38 |
||||||
|
Allows the resetting of all cm1110RateConvStats statistical counters
for this port. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.4.1.39 |
cm1110RateConvAvctTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5
·
1 row entry
·
15 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1110RateConvAvctTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1110RateConvAvctTable'
Table of CM-1110 type media converter module's
Entries of the table, each relating to a separate fiber or copper
port on the CM-1110 type media converter module.
port on the CM-1110 type media converter module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.2 |
||||||
|
Set this self-clearing variable to yes initiate the Advanced Virtual
Cable Test. Note: During the test, no network data will be passed. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.3 |
||||||
|
This object identifies the state of the Advanced Virtual Cable Tester.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.4 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx/Rx
pair one. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.5 |
||||||
|
Amplitude of Tx/Rx pair one in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.6 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
one is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.7 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx/Rx
pair two. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.8 |
||||||
|
Amplitude of Tx/Rx pair two in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.9 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
two is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.10 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx/Rx
pair three. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.11 |
||||||
|
Amplitude of Tx/Rx pair three in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.12 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
three is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.13 |
||||||
|
Test result code returned from Virtual Cable Test of Tx/Rx
pair four. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.14 |
||||||
|
Amplitude of Tx/Rx pair four in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.15 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
four is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.3.5.1.16 |
cm110RateConvTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1
·
1 row entry
·
26 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm110RateConvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm110RateConvTable'
Table of CM-110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.2 |
||||||
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.3 |
||||||
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.4 |
||||||
|
This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.5 |
||||||
|
This object identifies the media converter module's hardware Auto MDIX jumper
settings. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.6 |
||||||
|
Media converter module's current switch setting for copper auto-negotiation.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.7 |
||||||
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.8 |
||||||
|
Media converter module's current switch setting for Far End Fault.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.9 |
||||||
|
Media converter module's current switch setting for copper duplex.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.10 |
||||||
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.11 |
||||||
|
Media converter module's current switch setting for fiber duplex.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.12 |
||||||
|
Media converter module's current switch setting for fiber loopback mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.13 |
||||||
|
Media converter module's current fiber link status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.14 |
||||||
|
Media converter module's fiber port connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.15 |
||||||
|
Media converter module's fiber port speed in megabits per second.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.16 |
||||||
|
Media converter module's current fiber Far End Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.17 |
||||||
|
This object identifies the status of whether light is being received
on the fiber port |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.18 |
||||||
|
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.19 |
||||||
|
Media converter module's current copper link status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.20 |
||||||
|
Media converter module's copper connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.21 |
||||||
|
Media converter module's current copper auto-negotiation state.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.22 |
||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated speed setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.23 |
||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be i… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.24 |
||||||
|
If copper auto-negotiation state is complete then this object
indicates the media converter module's current copper auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned should b… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.25 |
||||||
|
If copper auto-negotiation state is complete then this object indicates
the media converter module's current copper auto-negotiated pause (flow control) setting. If auto-negotiation is not complete then the value return… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.26 |
||||||
|
Media converter module's fiber Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.1.1.27 |
cm110ConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2
·
1 row entry
·
72 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm110ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm110ConfigTable'
Table of CM-110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.5 |
||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough. This object is read-only if the media converter module's ConfigMode jumpe… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.6 |
||||||||
|
This object identifies the media converter module's maximum packet size setting
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.7 |
||||||||
|
This object identifies a user definable name for the fiber port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.8 |
||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.9 |
||||||||
|
This object identifies the fiber port duplex setting.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.10 |
||||||||
|
This object identifies a user definable name for the copper port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.11 |
||||||||
|
This object identifies whether the fiber port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.12 |
||||||||
|
This object identifies the whether copper auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.13 |
||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.14 |
||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.15 |
||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.16 |
||||||||
|
This object controls whether or the copper port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.17 |
||||||||
|
This object identifies the current copper speed in megabits per
second. This object is ignored if auto-negotiation is enabled. This object is ignored if auto-negotiation is enabled |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.18 |
||||||||
|
This object identifies the copper duplex setting. This object is
ignored if auto-negotiation is enabled This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.19 |
||||||||
|
This object identifies the copper MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.20 |
||||||||
|
This object identifies the copper's pause (flow control) settings.
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.21 |
||||||||
|
When using cable exceeding 100 meters, the 10BASE-T this feature
should be enabled. |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.22 |
||||||||
|
Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.23 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.24 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.25 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.26 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.27 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.28 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.29 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.30 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.31 |
||||||||
|
Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.32 |
||||||||
|
Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.33 |
||||||||
|
Configure priority precedence.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.34 |
||||||||
|
Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.35 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.36 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.37 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.38 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.39 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.40 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.41 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.42 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.43 |
||||||||
|
Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.44 |
||||||||
|
Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.45 |
||||||||
|
Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.46 |
||||||||
|
Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.47 |
||||||||
|
Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.48 |
||||||||
|
Set the default frame priority.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.49 |
||||||||
|
Set the default tagging action.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.50 |
||||||||
|
Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.51 |
||||||||
|
Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.52 |
||||||||
|
Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.53 |
||||||||
|
Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.54 |
||||||||
|
Configure priority precedence.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.55 |
||||||||
|
Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.56 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.57 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.58 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.59 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.60 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.61 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.62 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.63 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.64 |
||||||||
|
Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.65 |
||||||||
|
Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.66 |
||||||||
|
Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.67 |
||||||||
|
Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.68 |
||||||||
|
Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.69 |
||||||||
|
Set the default frame priority.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.70 |
||||||||
|
Set the default tagging action.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.71 |
||||||||
|
Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.72 |
||||||||
|
Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.2.1.73 |
cm110LedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3
·
1 row entry
·
7 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm110LedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm110LedTable'
Table of CM-110 type media converter module's LED status information.
Entries of the table, each relating to a separate CM-110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Fi… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.3 |
|
This object identifies the status of the Full Duplex Fiber (FDF) LED
on the media converter module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.4 |
|
This object identifies the status of the link fiber (LKF) LED on the
media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.5 |
|
This object identifies the status of the link copper speed (100/1000)
LED on the media converter module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.6 |
|
This object identifies the status of the Full Duplex Copper (FDC) LED
on the media converter module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.7 |
|
This object identifies the status of the link copper (LKC) LED on the
media converter module. Possible status values are: off(0) - No copper link on(1) - Copper link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.3.1.8 |
cm110RateConvStatsTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4
·
1 row entry
·
36 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm110RateConvStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm110RateConvStatsTable'
Table of CM-110 media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-110 type
media converter module.
media converter module.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.2 |
||||||
|
Media converter module port index indicating which media port the statistical
counters are associated with. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.3 |
||||||
|
Total number of bad frames received.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.4 |
||||||
|
Total number of TX collisions encountered.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.5 |
||||||
|
A counter that counts the number of good frames that were filtered
due to ingress switch policy rules. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.6 |
||||||
|
An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.7 |
||||||
|
An ingress counter that is the sum of lengths of all bad Ethernet
frames received on the media port.. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.8 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Unicast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.9 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Broadcast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.10 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Multicast destination MAC address. This count does not include frames counted in the cm1110PortInPauses or the cm1110PortInBroadcasts objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.11 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Pause destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.12 |
||||||
|
An ingress counter that counts the number of frames received with a
length less that 64 octets but with a valid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.13 |
||||||
|
An ingress counter that counts the number of frames received with a
length less that 64 octets and an invalid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.14 |
||||||
|
An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a valid FCS. The maximum packet size can be set using the cm110ConfigMaxPacketsSize object. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.15 |
||||||
|
An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a invalid FCS. The maximum packet size can be set using the cm110ConfigMaxPacketsSize object. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.16 |
||||||
|
An ingress counter of the number of Rx errors on the receive
side of the MAC |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.17 |
||||||
|
An ingress counter of the number of FCS Errors.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.18 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of exactly 64 Octets, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.19 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 65 and 127 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.20 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 128 and 255 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.21 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 256 and 511 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.22 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 512 and 1023 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.23 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 1024 and maximum packet size octets inclusive, including those with errors. The maximum packet size can be set using… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.24 |
||||||
|
An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.25 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Unicast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.26 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Broadcast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.27 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Multicast destination MAC address. This count does not include frames counted in the cm1110PortOutPauses or the cm1110PortOutBroadcasts objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.28 |
||||||
|
An Egress counter that counts the number of good frames received that
have a Pause destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.29 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced no collsions but are delayed because the medium was busy during the first attempt. This counter is applicable in half-duplex o… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.30 |
||||||
|
An Egress counter that counts the number of collision events seen by
the MAC not including those counted in cm110PortSingles, cm110PortMultiple , cm1110PortExcessives or cm110PortLates objects. This counter is applicabl… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.31 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced exactly one collision. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.32 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced more than one collision. This counter is aplicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.33 |
||||||
|
An Egress counter that counts the number frames dropped in the transmit
MAC because the frame experienced 16 consecutive collisions. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.34 |
||||||
|
An Egress counter that counts the number times a collision is detected
later than 512 bits-times into the transmission of a frame. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.35 |
||||||
|
An Egress counter that counts the number frames transmitted with an
invalid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.36 |
||||||
|
Allows the resetting of all cm110RateConvStats statistical counters
for this port. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.4.1.37 |
cm110RateConvVctTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5
·
1 row entry
·
9 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm110RateConvVctTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm110RateConvVctTable'
Table of CM-110 type media converter module's
Entries of the table, each relating to a separate fiber or copper
port on the CM-110 type media converter module.
port on the CM-110 type media converter module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.2 |
||||||
|
Set this self-clearing variable to yes initiate the Advanced Virtual
Cable Test. Note: During the test, no network data will be passed. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.3 |
||||||
|
This object identifies the stat of the Advanced Virtual Cable Test.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.4 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx
pair. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.5 |
||||||
|
Amplitude of Tx pair in Volts.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.6 |
||||||
|
Distance in meters to fault when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.7 |
||||||
|
Test result code returned from Virtual Cable Test of the Rx
pair. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.8 |
||||||
|
Amplitude of Rx pair in Volts.
|
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.9 |
||||||
|
Distance in meters to fault when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.4.5.1.10 |
mcrMgtTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1
·
1 row entry
·
6 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrMgtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrMgtTable'
Table of MCR-MGT management module status type information.
Entries of the table, each relating to a separate MCR-MGT type
management module.
management module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the MCR-MGT module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.2 |
||||||
|
This object identifies the model name of management module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.3 |
||||||
|
This object identifies a static description of the management module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.4 |
||||||
|
This object identifies the fail-safe bootloader version of the
management module present in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.5 |
||||||
|
This object identifies the time (in hundredths of a second) since the
management module was last re-initialized. |
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.6 |
||||||
|
This object identifies the current status of the DSR signal, (active or
inactive) |
OnOffValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.1.1.7 |
mcrMgtConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2
·
1 row entry
·
11 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrMgtConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrMgtConfigTable'
Table of MCR-MGT management module Hardware configuration type information.
Entries of the table, each relating to a separate MCR-MGT type
management module.
management module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the MCR-MGT module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.3 |
||||||||
|
Define the Ethernet connection speed/duplex of the twisted pair interface.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.4 |
||||||||
|
Define the Ethernet connection crossover TX/RX Pair orientation of the
twisted pair interface as auto(0), mdi(1) (straight through) or mdix(2) (crossed over). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.5 |
||||||||
|
Determines whether the management module's console port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.6 |
||||||||
|
Specifies the baud rate of the console port; keep in mind that
speed is affected by the length of the cable. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.7 |
||||||||
|
Specifies the number of bits in a byte.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.8 |
||||||||
|
Specifies if you are using Even, Odd, or No parity on the console.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.9 |
||||||||
|
Specifies the number of stop bits that follow a byte.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.10 |
||||||||
|
Defines whether the data flow is handled by the software (Soft), hardware (Hard),
both or None. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.11 |
||||||||
|
Specifies whether the RS-232 signal DSR (Data Set Ready) should
be monitored, for the console port. When DSR is monitored and the management module detects the DSR signal go inactive then the current cons… |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.2.1.12 |
mcrMgtLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3
·
1 row entry
·
5 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrMgtLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrMgtLedTable'
Table of MCR-MGT management module LED information.
Entries of the table, each relating to a separate MCR-MGT type
management module.
management module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the MCR-MGT module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the management module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.3 |
|
This object identifies the status of the alarm (ALM) LED on the management module.
Possible status values are: offNoAlarms(0) - Normal operating condition onRedAlarmsPresent(1) - System hardware or software alar… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.4 |
|
This object identifies the status of the link copper (LKC) LED on the management module.
Possible status values are: offLinkDown(0) - Copper link status is DOWN onGreenLinkUp(1) - Copper link status is UP |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.5 |
|
This object identifies the status of the link copper speed (100/1000)
LED on the management module. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.3.1.6 |
mcrMgtEthStatsTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4
·
1 row entry
·
39 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrMgtEthStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrMgtEthStatsTable'
Table of MCR-MGT management module Ethernet status and statistics information.
An entry in the Ethernet statistics table, each relating to an Ethernet interface.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the MCR-MGT module is currently inserted.
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.2 |
||||||
|
The Ethernet interface number.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.3 |
||||||
|
Displays Ethernet interface name.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.4 |
||||||
|
Displays the MAC address.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.5 |
||||||
|
Displays the Ethernet link status - down(0) or up(1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.6 |
||||||
|
Current status of the Ethernet connection speed/duplex twisted pair interface.
When the management module does not know the pair speed/duplex, this variable has the value unknown(0). |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.7 |
||||||
|
The management module's Ethernet Broadcast Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.8 |
||||||
|
The management module's Ethernet Debug Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.9 |
||||||
|
The management module's Ethernet Loopback Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.10 |
||||||
|
The management module's Ethernet Point to Point Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.11 |
||||||
|
The management module's Ethernet No Trailers Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.12 |
||||||
|
The management module's Ethernet Running Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.13 |
||||||
|
The management module's Ethernet No Arp Protocol Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.14 |
||||||
|
The management module's Ethernet Promiscuous Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.15 |
||||||
|
The management module's Ethernet Receive all Multicast Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.16 |
||||||
|
The management module's Ethernet Master Load Balancer Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.17 |
||||||
|
The management module's Ethernet Slave Load Balancer Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.18 |
||||||
|
The management module's Ethernet Multicast Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.19 |
||||||
|
The management module's Ethernet Set Media Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.20 |
||||||
|
The management module's Ethernet Auto Media Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.21 |
||||||
|
The management module's Ethernet Dynamic Flags status.
|
YesNoValue Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.22 |
||||||
|
The management module's Ethernet local IPv4 address.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.23 |
||||||
|
The management module's Ethernet IPv4 subnet mask.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.24 |
||||||
|
The management module's Ethernet Broadcast address.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.25 |
||||||
|
The management module's Ethernet MTU.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.26 |
||||||
|
The management module's Ethernet TX Queue Length.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.27 |
||||||
|
The management module's Ethernet RX Bytes count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.28 |
||||||
|
The management module's Ethernet TX Bytes count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.29 |
||||||
|
The management module's Ethernet RX Packets count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.30 |
||||||
|
The management module's Ethernet TX Packets count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.31 |
||||||
|
The management module's Ethernet RX Packets Errors count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.32 |
||||||
|
The management module's Ethernet TX Packets Errors count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.33 |
||||||
|
The management module's Ethernet RX Dropped packets count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.34 |
||||||
|
The management module's Ethernet TX Dropped packets count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.35 |
||||||
|
The management module's Ethernet RX Overruns count
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.36 |
||||||
|
The management module's Ethernet TX Overruns count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.37 |
||||||
|
The management module's Ethernet RX Frame Errors count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.38 |
||||||
|
The management module's Ethernet TX Carrier Errors count
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.39 |
||||||
|
The management module's Ethernet Collisions count.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.5.4.1.40 |
cm1000mmFixedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1
·
1 row entry
·
26 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1000mmFixedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1000mmFixedTable'
Table of CM-1000MM type media converter module's status type information.
Entries of the table, each relating to a separate CM-1000MM type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-1000MM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.2 |
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.3 |
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.4 |
|
This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configurat… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.5 |
|
Media converter module's current switch setting for fiber Auto-Negotiation.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.6 |
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.7 |
|
Media converter module's current switch setting for Fiber Fault Alert.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.8 |
|
Media converter module's current switch setting for loopback (fiber port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.9 |
|
Media converter module's current switch setting for loopback (fiber port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.10 |
|
Media converter module's current fiber link status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.12 |
|
Media converter module's fiber port connector type (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.13 |
|
Media converter module's current fiber auto-negotiation state (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.14 |
|
Media converter module's fiber port speed in megabits per second (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.15 |
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.16 |
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.17 |
|
Media converter module's fiber Link Partner Remote Fault status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.18 |
|
This object identifies the status of whether light is being received
on the fiber port (port 1) |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.19 |
|
Media converter module's current fiber link status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.20 |
|
Media converter module's fiber port connector type (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.21 |
|
Media converter module's current fiber auto-negotiation state (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.22 |
|
Media converter module's fiber port speed in megabits per second (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.23 |
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.24 |
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.25 |
|
Media converter module's fiber Link Partner Remote Fault status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.26 |
|
This object identifies the status of whether light is being received
on the fiber port (port 2) |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.27 |
|
Media converter module's current fiber loopback mode setting. Writing to this
object will change the current settings. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitche… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.28 |
cm1000mmConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2
·
1 row entry
·
11 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1000mmConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1000mmConfigTable'
Table of CM-1000MM type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-1000MM type
media converter module.
media converter module.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1000MM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.5 |
||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.6 |
||||||||
|
This object identifies the Jumbo Packet setting for the media converter module
present in the chassis. |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.7 |
||||||||
|
This object identifies the wither fiber auto-negotiation is
enabled for both ports. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.8 |
||||||||
|
This object identifies a user definable name for the fiber port (port 1).
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.9 |
||||||||
|
This object identifies whether the fiber port is enabled (port 1).
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.10 |
||||||||
|
This object identifies a user definable name for the fiber port (port 2).
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.11 |
||||||||
|
This object identifies whether the fiber port is enabled (port 2).
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.2.1.12 |
cm1000mmLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm1000mmLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm1000mmLedTable'
Table of CM-1000MM type media converter module's LED status information.
Entries of the table, each relating to a separate CM-1000MM type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-1000 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Fi… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.3 |
|
This object identifies the status of the link fiber port 1 (LK1) LED on the
media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.4 |
|
This object identifies the status of the link fiber port 2 (LK2) LED on the
media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.3.1.5 |
cm100mmFixedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1
·
1 row entry
·
19 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm100mmFixedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm100mmFixedTable'
Table of CM-100MM type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-100MM type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-100MM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.2 |
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.3 |
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.4 |
|
This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.5 |
|
Media converter module's current switch setting for Link Passthrough.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.6 |
|
Media converter module's current switch setting for Far-End Fault.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.7 |
|
Media converter module's current switch setting for Loopback (fiber port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.8 |
|
Media converter module's current switch setting for Loopback (fiber port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.9 |
|
Media converter module's current fiber link status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.12 |
|
Media converter module's fiber port connector type (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.13 |
|
Media converter module's fiber port speed in megabits per second (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.14 |
|
Media converter module's current fiber Far End Fault status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.15 |
|
This object identifies the status of whether light is being received
on the fiber port (port 1) |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.16 |
|
Media converter module's current fiber link status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.17 |
|
Media converter module's fiber port connector type (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.18 |
|
Media converter module's fiber port speed in megabits per second (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.19 |
|
Media converter module's current fiber Far End Fault status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.20 |
|
This object identifies the status of whether light is being received
on the fiber port (port 2) |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.21 |
|
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.1.1.22 |
cm100mmConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2
·
1 row entry
·
9 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm100mmConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm100mmConfigTable'
Table of CM-100MM type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-100MM type
media converter module.
media converter module.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-100MM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.5 |
||||||||
|
This object identifies the fiber Far End Fault setting for the media
module. This setting is always enabled if Link Mode is set to linkPassthrough. This object is read-only if the media converter module's ConfigMode jum… |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.6 |
||||||||
|
This object identifies a user definable name for the fiber port (port 1).
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.7 |
||||||||
|
This object identifies whether the fiber port is enabled (port 2).
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.8 |
||||||||
|
This object identifies a user definable name for the fiber port (port 2).
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.9 |
||||||||
|
This object identifies whether the fiber port is enabled (port 2).
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.2.1.10 |
cm100mmLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm100mmLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm100mmLedTable'
Table of CM-100MM type media converter module's LED status information.
Entries of the table, each relating to a separate CM-100MM type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-100MM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Fi… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.3 |
|
This object identifies the status of the link fiber port 1 (LK1) LED on the media converter module.
Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.4 |
|
This object identifies the status of the link fiber port 2 (LK2) LED on the
media converter module. Possible status values are: off(0) - No fiber link on(1) - Fiber link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.7.3.1.5 |
cm10gFixedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1
·
1 row entry
·
25 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm10gFixedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm10gFixedTable'
Table of CM-10G type media converter module's status type information.
Entries of the table, each relating to a separate CM-10G type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-10G type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.2 |
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.3 |
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.4 |
|
This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configurat… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.5 |
|
Media converter module's current switch setting for operation mode.
Data mode is for normal data transmission. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.6 |
|
Media converter module's current switch setting for Link Mode. If
the Operation switch is set to Test, then this object indicates whether the port is in loopback or performing the build in link-test. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.7 |
|
Media converter module's current switch setting for Fiber Fault
Alert. If the Operation switch is set to Test, then this object indicates which port is in test mode |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.8 |
|
This oject indicates the current switch setting for EDC auto mode
for port 1. This object only applies to SFP moudles. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.9 |
|
This oject indicates the current switch setting for EDC auto mode
for port 2. This object only applies to SFP moudles. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.10 |
|
Media converter module's current fiber link status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.11 |
|
Media converter module's fiber port connector type (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.12 |
|
Media converter module's current fiber auto-negotiation state (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.13 |
|
Media converter module's fiber port speed in megabits per second (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.14 |
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.15 |
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.16 |
|
This object identifies the status of whether light is being received
on the fiber port (port 1) |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.17 |
|
Media converter module's current fiber link status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.18 |
|
Media converter module's fiber port connector type (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.19 |
|
Media converter module's current fiber auto-negotiation state (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.20 |
|
Media converter module's fiber port speed in megabits per second (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.21 |
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.22 |
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.23 |
|
This object identifies the status of whether light is being received
on the fiber port (port 2) |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.24 |
|
Media converter module's current port loopback mode setting. Writing to this
object will change the current settings. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.25 |
|
Media converter module's current port test mode setting.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.1.1.26 |
cm10gConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2
·
1 row entry
·
30 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm10gConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm10gConfigTable'
Table of CM-10G type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-10G type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-10G type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.5 |
||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.6 |
||||||||
|
This object identifies the wither fiber auto-negotiation is
enabled for both ports. This only applies if 1G SFP modules are in use. This object is read-only if the media module's ConfigMode jumper is set to hardwareSw… |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.7 |
||||||||
|
This object identifies a user definable name for port 1.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.8 |
||||||||
|
This object identifies whether port 1 is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.9 |
||||||||
|
This object identifies the EDC mode for this port. This config
option only applies for an SFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.10 |
||||||||
|
This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.11 |
||||||||
|
This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: -128-127 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.12 |
||||||||
|
This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: -128-127 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.13 |
||||||||
|
This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.14 |
||||||||
|
This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.15 |
||||||||
|
This object identifies whether channel number fine tuning is enabled
for this port. This config option only applies for an XFP module. This object is read-only if the media module's ConfigMode jumper is set to hardwar… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.16 |
||||||||
|
This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.17 |
||||||||
|
This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used. This object is read-only if the media module's ConfigMode jumper is set to hardware… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.18 |
||||||||
|
This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.19 |
||||||||
|
This object identifies a user definable name for port 2.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.20 |
||||||||
|
This object identifies whether port 2 is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.21 |
||||||||
|
This object identifies the EDC mode for this port. This config
option only applies for an SFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.22 |
||||||||
|
This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.23 |
||||||||
|
This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: -128-127 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.24 |
||||||||
|
This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: -128-127 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.25 |
||||||||
|
This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.26 |
||||||||
|
This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.27 |
||||||||
|
This object identifies whether channel number fine tuning is enabled
for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.28 |
||||||||
|
This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.29 |
||||||||
|
This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used. This object is read-only if the media module's ConfigMode jumper is set to hardware… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.30 |
||||||||
|
This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.2.1.31 |
cm10gLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm10gLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm10gLedTable'
Table of CM-10G type media converter module's LED status information.
Entries of the table, each relating to a separate CM-10G type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-10G type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Lo… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.3 |
|
This object identifies the status of the port 1 link (LK1) LED on the
media converter module. Possible status values are: off(0) - No link on(1) - Port link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.4 |
|
This object identifies the status of the port 2 link (LK2) LED on the
media converter module. Possible status values are: off(0) - No link on(1) - Port link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.8.3.1.5 |
exCMTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1
·
1 row entry
·
94 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk exCMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::exCMTable'
Table of CM-1110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-1110 type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.2 |
||||||
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.3 |
||||||
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.4 |
||||||
|
This object identifies the media converter module's ConfigMode, set by hardware
switch on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.5 |
||||||
|
Media converter module's current switch setting for VDSL role.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.6 |
||||||
|
Media converter module's current switch setting for VDSL rate/reach.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.7 |
||||||
|
Media converter module's current switch setting for VDSL band plan.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.8 |
||||||
|
Media converter module's current switch setting for VDSL signal-to-noise ratio.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.9 |
||||||
|
Media converter module's current switch setting for VDSL loopback.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.10 |
||||||
|
Media converter module's current switch setting for ethernet auto-negotiation.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.11 |
||||||
|
Media converter module's current switch setting for ethernet speed (when auto-negotiation is disabled).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.12 |
||||||
|
Media converter module's current switch setting for ethernet duplex (when auto-negotiation is disabled).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.13 |
||||||
|
Media converter module's current switch setting for link mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.14 |
||||||
|
Media converter module's current switch setting for interlink fault feedback.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.15 |
||||||
|
Media converter module's current VDSL link status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.16 |
||||||
|
Media converter module's VDSL port connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.17 |
||||||
|
This object is read-only if the media converter module's ConfigMode jumper is
set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.18 |
||||||
|
This object identifies the VDSL port's current role.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.19 |
||||||
|
This object identifies the VDSL port's current profile. This value has no meaning
when the VDSL role is remote. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.20 |
||||||
|
This object identifies the VDSL port's current bitswapping status. This value has no meaning
when the VDSL role is remote. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.21 |
||||||
|
This object identifies the VDSL port's attainable data rate (upstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.22 |
||||||
|
This object identifies the VDSL port's attainable data rate (downstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.23 |
||||||
|
This object identifies the VDSL port's actual data rate (upstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.24 |
||||||
|
This object identifies the VDSL port's actual data rate (downstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.25 |
||||||
|
This object identifies the VDSL port's previous data rate (upstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.26 |
||||||
|
This object identifies the VDSL port's previous data rate (downstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.27 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (upstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.28 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (downstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.29 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (upstream 0) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.30 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (upstream 1) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.31 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (downstream 1) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.32 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (upstream 2) in 0.2 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.33 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (downstream 2) in 0.2 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.34 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (upstream 3) in 0.3 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.35 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (downstream 3) in 0.3 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.36 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (upstream 4) in 0.4 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.37 |
||||||
|
This object identifies the VDSL port's actual signal-to-noise ratio (downstream 4) in 0.4 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.38 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (upstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.39 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (downstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.40 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (upstream 0) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.41 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (upstream 1) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.42 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (downstream 1) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.43 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (upstream 2) in 0.2 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.44 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (downstream 2) in 0.2 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.45 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (upstream 3) in 0.3 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.46 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (downstream 3) in 0.3 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.47 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (upstream 4) in 0.4 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.48 |
||||||
|
This object identifies the VDSL port's actual signal attenuation (downstream 4) in 0.4 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.49 |
||||||
|
This object identifies the VDSL port's actual line attenuation (upstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.50 |
||||||
|
This object identifies the VDSL port's actual line attenuation (downstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.51 |
||||||
|
This object identifies the VDSL port's actual line attenuation (upstream 0) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.52 |
||||||
|
This object identifies the VDSL port's actual line attenuation (upstream 1) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.53 |
||||||
|
This object identifies the VDSL port's actual line attenuation (downstream 1) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.54 |
||||||
|
This object identifies the VDSL port's actual line attenuation (upstream 2) in 0.2 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.55 |
||||||
|
This object identifies the VDSL port's actual line attenuation (downstream 2) in 0.2 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.56 |
||||||
|
This object identifies the VDSL port's actual line attenuation (upstream 3) in 0.3 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.57 |
||||||
|
This object identifies the VDSL port's actual line attenuation (downstream 3) in 0.3 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.58 |
||||||
|
This object identifies the VDSL port's actual line attenuation (upstream 4) in 0.4 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.59 |
||||||
|
This object identifies the VDSL port's actual line attenuation (downstream 4) in 0.4 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.60 |
||||||
|
This object identifies the VDSL port's actual interleave delay (upstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.61 |
||||||
|
This object identifies the VDSL port's actual interleave delay (downstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.62 |
||||||
|
This object identifies the VDSL port's actual INP (impulse noise protection) (upstream).
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.63 |
||||||
|
This object identifies the VDSL port's actual INP (impulse noise protection) (downstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.64 |
||||||
|
This object identifies the VDSL port's actual interleaving depth (upstream).
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.65 |
||||||
|
This object identifies the VDSL port's actual interleaving depth (impulse noise protection) (downstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.66 |
||||||
|
This object identifies the VDSL port's actual interleaving block (upstream).
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.67 |
||||||
|
This object identifies the VDSL port's actual interleaving block (impulse noise protection) (downstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.68 |
||||||
|
This object identifies the VDSL port's actual transmit power (upstream) in 0.1 dBm.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.69 |
||||||
|
This object identifies the VDSL port's actual transmit power (downstream) in 0.1 dBm.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.70 |
||||||
|
This object identifies the VDSL port's maximum data rate (upstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.71 |
||||||
|
This object identifies the VDSL port's maximum data rate (downstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.72 |
||||||
|
This object identifies the VDSL port's minimum data rate (upstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.73 |
||||||
|
This object identifies the VDSL port's minimum data rate (downstream) in kbps.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.74 |
||||||
|
This object identifies the VDSL port's target signal-to-noise ratio (upstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.75 |
||||||
|
This object identifies the VDSL port's target signal-to-noise ratio (downstream) in 0.1 dB.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.76 |
||||||
|
This object identifies the VDSL port's maximum interleave delay (upstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.77 |
||||||
|
This object identifies the VDSL port's maximum interleave delay (downstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.78 |
||||||
|
This object identifies the VDSL port's minimum INP (impulse noise protection) (upstream).
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.79 |
||||||
|
This object identifies the VDSL port's minimum INP (impulse noise protection) (downstream) in ms.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.80 |
||||||
|
Write remoteLoopbackOff(1) or remoteLoopbackOn(2) to this object to
set the loopback state of the remote VDSL peer. This object's value represents the last loopback command sent to the peer. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.81 |
||||||
|
Write resetRemotePeer(1) to this object to reset the remote VDSL peer. This object's value has no meaning
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.82 |
||||||
|
Media converter module's current Ethernet link status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.83 |
||||||
|
Media converter module's Ethernet connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.84 |
||||||
|
Media converter module's current Ethernet auto-negotiation state.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.85 |
||||||
|
If Ethernet auto-negotiation state is complete then this object
indicates the media converter module's current Ethernet auto-negotiated speed setting. If auto-negotiation is not complete then the value returned should b… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.86 |
||||||
|
If Ethernet auto-negotiation state is complete then this object
indicates the media converter module's current Ethernet auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should … |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.87 |
||||||
|
If Ethernet auto-negotiation state is complete then this object
indicates the media converter module's current Ethernet auto-negotiated MDI/MDI-X setting. If auto-negotiation is not complete then the value returned shou… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.88 |
||||||
|
If Ethernet auto-negotiation state is complete then this object indicates
the media converter module's current Ethernet auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should b… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.89 |
||||||
|
Media converter module's Ethernet Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.90 |
||||||
|
This object identifies the status of the Ethernet auto speed downshift
feature. noDownshift indicates that an automatic downshift of the Ethernet speed has not occurred. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.91 |
||||||
|
This object identifies the Ethernet port's crossover status: MDI or MDI-X.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.92 |
||||||
|
This object identifies the version of the VDSL firmware.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.93 |
||||||
|
This object identifies the date of the VDSL firmware
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.94 |
||||||
|
This object identifies the version of the VDSL firmware, in human-readable format.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.1.1.95 |
exCMConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2
·
1 row entry
·
92 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk exCMConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::exCMConfigTable'
Table of CM-1110 type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the ex-CM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.5 |
||||||||
|
This object identifies the interlink fault feedback setting for the media
module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.6 |
||||||||
|
This object identifies a user definable name for the VDSL port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.7 |
||||||||
|
This object identifies whether the VDSL port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.8 |
||||||||
|
This object specifies how the VDSL profile is selected.
Auto: select through exCMConfigVdslRate and exCMConfigVdslSymmetry Manual: select through exCMConfigVdslProfile. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.9 |
||||||||
|
This object specifies the VDSL role: auto, local (CO), or remote (CPE).
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.10 |
||||||||
|
This object specifies the VDSL rate/reach.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.11 |
||||||||
|
This object specifies the VDSL band plan or symmetry.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.12 |
||||||||
|
This object specifies the VDSL profile.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.13 |
||||||||
|
This object specifies whether to override advanced VDSL profile
settings (e.g exCMConfigVdslSignalToNoiseRatioUp). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.14 |
||||||||
|
This object represents the advanced VDSL profile setting
signal-to-noise ratio (upstream) in 0.1 dB. |
Integer32r/w Constraints: range: 30-240 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.15 |
||||||||
|
This object represents the advanced VDSL profile setting
minimum data rate (upstream) in kbps. |
Integer32r/w Constraints: range: 128-101064 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.16 |
||||||||
|
This object represents the advanced VDSL profile setting
maximum data rate (upstream) in kbps. |
Integer32r/w Constraints: range: 128-101064 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.17 |
||||||||
|
This object represents the advanced VDSL profile setting
maximum delay (upstream) in ms. |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.18 |
||||||||
|
This object represents the advanced VDSL profile setting
minimum INP (impulse noise protection) (upstream). |
Integer32r/w Constraints: range: 1-18 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.19 |
||||||||
|
This object represents the advanced VDSL profile setting
signal-to-noise ratio (downstream) in 0.1 dB. |
Integer32r/w Constraints: range: 30-240 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.20 |
||||||||
|
This object represents the advanced VDSL profile setting
minimum data rate (downstream) in kbps. |
Integer32r/w Constraints: range: 128-101064 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.21 |
||||||||
|
This object represents the advanced VDSL profile setting
maximum data rate (downstream) in kbps. |
Integer32r/w Constraints: range: 128-101064 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.22 |
||||||||
|
This object represents the advanced VDSL profile setting
maximum delay (downstream) in ms. |
Integer32r/w Constraints: range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.23 |
||||||||
|
This object represents the advanced VDSL profile setting
minimum INP (impulse noise protection) (downstream). |
Integer32r/w Constraints: range: 1-18 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.24 |
||||||||
|
This object represents the advanced VDSL profile
setting bitswapping. |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.25 |
||||||||
|
This object represents the VDSL low bandwidth alarm threshold (upstream) in kbps.
|
Integer32r/w Constraints: range: 0-90000 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.26 |
||||||||
|
This object represents the VDSL low bandwidth alarm threshold (downstream) in kbps.
|
Integer32r/w Constraints: range: 0-90000 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.27 |
||||||||
|
This object identifies a user definable name for the ethernet port.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.28 |
||||||||
|
This object identifies whether the VDSL port is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.29 |
||||||||
|
This object identifies the whether ethernet auto-negotiation is
enabled. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.30 |
||||||||
|
This object controls whether or the ethernet port advertises willingness
to connect at 10Mbps, half duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.31 |
||||||||
|
This object controls whether or the ethernet port advertises willingness
to connect at 10Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.32 |
||||||||
|
This object controls whether or the ethernet port advertises willingness
to connect at 100Mbps, half duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.33 |
||||||||
|
This object controls whether or the ethernet port advertises willingness
to connect at 100Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.34 |
||||||||
|
This object controls whether or the ethernet port advertises willingness
to connect at 1000Mbps, full duplex. This setting is ignored when auto-negotiation is disabled. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.35 |
||||||||
|
If ethernet auto-negotiation is disabled then this object identifies
the configured cooper speed. 1000 Mbps speed can only be auto negotiated. If ethernet auto-negotiation is enabled then this object is ignored. This o… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.36 |
||||||||
|
If ethernet auto-negotiation is disabled then this object identifies
the duplex setting for 10 & 100 Mbps for the ethernet port. Duplex for 1000 Mbps has to be auto negotiated. This object is read-only if the media con… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.37 |
||||||||
|
This object identifies the ethernet MDI/MDI-X setting.This object
is read-only if the media converter module's ConfigMode jumper is set to |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.38 |
||||||||
|
This object identifies the ethernet pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrical TX or advertise symmetrical and asymmetrical RX. This ob… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.39 |
||||||||
|
This object identifies the number of times the PHY attempts to
establish a Gigabit link before the PHY downshift to the next highest speed. A value of 0 indicates the auto downshift is disabled |
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.40 |
||||||||
|
When using cable exceeding 100 meters in 10BASE-T mode this feature
should be set to extended(1). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.41 |
||||||||
|
Restrict the flow of Ethernet traffic to a single direction.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.42 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.43 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.44 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.45 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.46 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.47 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.48 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.49 |
||||||||
|
Set the egress queue of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module… |
Integer32r/w Constraints: range: 0-3 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.50 |
||||||||
|
Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.51 |
||||||||
|
Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.52 |
||||||||
|
Configure priority precedence.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.53 |
||||||||
|
Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.54 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.55 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.56 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.57 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.58 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.59 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.60 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.61 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.62 |
||||||||
|
Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.63 |
||||||||
|
Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.64 |
||||||||
|
Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.65 |
||||||||
|
Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.66 |
||||||||
|
Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.67 |
||||||||
|
Set the default frame priority.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.68 |
||||||||
|
Set the default tagging action.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.69 |
||||||||
|
Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.70 |
||||||||
|
Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.71 |
||||||||
|
Use 802.1p tag priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.72 |
||||||||
|
Use IP TOS priority.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.73 |
||||||||
|
Configure priority precedence.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.74 |
||||||||
|
Configure priority congestion policy.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.75 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 0.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.76 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 1.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.77 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 2.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.78 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 3.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.79 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 4.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.80 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 5.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.81 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 6.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.82 |
||||||||
|
Change the priority of frames tagged with 802.1p priority 7.
A value of -1 signifies that this feature is not supported by the current media converter module firmware. (This feature may require a media converter module … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.83 |
||||||||
|
Set a limit on the rate of incoming packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.84 |
||||||||
|
Set a limit on the rate of outgoing packets.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.85 |
||||||||
|
Enable discarding of tagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.86 |
||||||||
|
Enable discarding of untagged frames.
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.87 |
||||||||
|
Set the default VLAN ID to insert when tagging frames.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.88 |
||||||||
|
Set the default frame priority.
(This feature may require a media converter module firmware upgrade). |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.89 |
||||||||
|
Set the default tagging action.
(This feature may require a media converter module firmware upgrade). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.90 |
||||||||
|
Enable filtering of multicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.91 |
||||||||
|
Enable filtering of unicast frames with an unknown destination
(This feature may require a media converter module firmware upgrade). |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.92 |
||||||||
|
This object represents the VDSL fast mode setting.
|
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.2.1.93 |
exCMLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3
·
1 row entry
·
6 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk exCMLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::exCMLedTable'
Table of CM-1110 type media converter module's LED status information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number of the module
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.2 |
|
This object identifies the status of the ILNK (InterLink) LED on the media converter module.
Possible status values are: slowBlinkingGreen(1) - ILNK port is idle or handshaking fastBlinkingGreen(2) - ILNK port i… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.3 |
|
This object identifies the status of the Local (LOC) LED
on the media converter module. When this LED is green, it indicates that the InterLink port's VDSL role is local. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.4 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - In… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.5 |
|
This object identifies the status of the ETH (Ethernet) LED on the media converter module.
Possible status values are: off(0) - ETH port is down slowBlinkingGreen(1) - ETH port is down, due to the … |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.6 |
|
This object identifies the status of the Remote (RMT) LED
on the media converter module. When this LED is green, it indicates that the InterLink port's VDSL role is remote. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.3.1.7 |
exCMStatsTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4
·
1 row entry
·
38 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk exCMStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::exCMStatsTable'
Table of CM-1110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the ex-1CM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.2 |
||||||
|
Media converter module port index indicating which media port the statistical
counters are associated with. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.3 |
||||||
|
A counter that counts the number of good, non-filtered frames that
normally would have been forwarded, but could not due to lack of buffer space. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.4 |
||||||
|
A counter that counts the number of good frames that were filtered
due to ingress switch policy rules. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.5 |
||||||
|
An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.6 |
||||||
|
An ingress counter that is the sum of lengths of all good Ethernet
frames received on the media port. This object is a 64-bit version of exCMPortInGoodOctets. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.7 |
||||||
|
An ingress counter that is the sum of lengths of all bad Ethernet
frames received on the media port.. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.8 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Unicast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.9 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Broadcast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.10 |
||||||
|
An ingress counter that counts the number of good frames received that
have a Multicast destination MAC address. This count does not include frames counted in the exCMPortInPauses or the exCMPortInBroadcasts objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.11 |
||||||
|
An ingress counter that counts the number of good frames reachieved that
have a Pause destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.12 |
||||||
|
An ingress counter that counts the number of frames received with a
length less that 64 octets but with a valid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.13 |
||||||
|
An ingress counter that counts the number of frames received with a
length less that 64 octets and an invalid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.14 |
||||||
|
An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a valid FCS. The maximum packet size can be set using the exCMConfigMaxPacketsSize object. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.15 |
||||||
|
An ingress counter that counts the number of frames received with a
length more than the maximum packet size but with a invalid FCS. The maximum packet size can be set using the exCMConfigMaxPacketsSize object. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.16 |
||||||
|
An ingress counter that counts the number of frames received with an
RxErr signal from the PHY. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.17 |
||||||
|
An ingress counter that counts the number of frames received with a
CRC error not counted in the exCMPortInFragments, exCMPortInFcsErr, or the exCMPortInRxErr objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.18 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of exactly 64 Octets, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.19 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 65 and 127 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.20 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 128 and 255 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.21 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 256 and 511 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.22 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 512 and 1023 Octets inclusive, including those with errors. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.23 |
||||||
|
A Histogram counter that counts the number of frames received and
transmitted with a length of between 1024 and maximum packet size octets inclusive, including those with errors. The maximum packet size can be set using… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.24 |
||||||
|
An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.25 |
||||||
|
An Egress counter that is the sum of lengths of all good Ethernet
frames sent on the media port. This object is a 64-bit version of exCMPortOutOctets. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.26 |
||||||
|
A counter that counts the number of good frames that were filtered
due to egress switch policy rules. |
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.27 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Unicast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.28 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Broadcast destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.29 |
||||||
|
An Egress counter that counts the number of good frames sent that
have a Multicast destination MAC address. This count does not include frames counted in the exCMPortOutPauses or the exCMPortOutBroadcasts objects. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.30 |
||||||
|
An Egress counter that counts the number of good frames reachieved that
have a Pause destination MAC address. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.31 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced no collisions but are delayed because the medium was busy during the first attempt. This counter is applicable in half-duplex … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.32 |
||||||
|
An Egress counter that counts the number of collision events seen by
the MAC not including those counted in exCMPortSingles, exCMPortMultiple , exCMPortExcessives or exCMPortLates objects. This counter is applicable in … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.33 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced exactly one collision. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.34 |
||||||
|
An Egress counter that counts the number of successfully transmitted
frames that experienced more than one collision. This counter is aplicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.35 |
||||||
|
An Egress counter that counts the number frames dropped in the transmit
MAC because the frame experienced 16 consecutive collisions. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.36 |
||||||
|
An Egress counter that counts the number times a collision is detected
later than 512 bits-times into the transmission of a frame. This counter is applicable in half-duplex only. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.37 |
||||||
|
An Egress counter that counts the number frames transmitted with an
invalid FCS. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.38 |
||||||
|
Allows the resetting of all exCMStats statistical counters
for this port. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.4.1.39 |
exCMVdslStatsTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5
·
1 row entry
·
21 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk exCMVdslStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::exCMVdslStatsTable'
Table of CM-1110 type media converter module's configuration and status type information.
Entries of the table, each relating to a separate CM-1110 type
media converter module.
media converter module.
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the ex-1CM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.2 |
|
Media converter module port index indicating which media port the statistical
counters are associated with. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.3 |
|
Media converter module port index indicating which media port the statistical
counters are associated with. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.4 |
|
The VDSL port's fully initialized (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.5 |
|
The VDSL port's code violation (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.6 |
|
The VDSL port's corrected (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.7 |
|
The VDSL port's forward error correction seconds (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.8 |
|
The VDSL port's errored seconds (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.9 |
|
The VDSL port's severely errored seconds (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.10 |
|
The VDSL port's loss of signal seconds (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.11 |
|
The VDSL port's unavailable seconds (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.12 |
|
The VDSL port's elapsed time in seconds (local) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.13 |
|
The VDSL port's fully initialized (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.14 |
|
The VDSL port's code violation (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.15 |
|
The VDSL port's corrected (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.16 |
|
The VDSL port's forward error correction seconds (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.17 |
|
The VDSL port's errored seconds (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.18 |
|
The VDSL port's severely errored seconds (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.19 |
|
The VDSL port's loss of signal seconds (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.20 |
|
The VDSL port's unavailable seconds (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.21 |
|
The VDSL port's elapsed time in seconds (remote) count.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.5.1.22 |
exCMAvctTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6
·
1 row entry
·
15 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk exCMAvctTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::exCMAvctTable'
Table of ex-CM media converter modules.
Entries of the table, each relating to a copper Ethernet
port on the eX-CM type media converter module.
port on the eX-CM type media converter module.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The Slot number the eX-CM type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.2 |
||||||
|
Set this self-clearing variable to yes initiate the Advanced Virtual
Cable Test. Note: During the test, no network data will be passed. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.3 |
||||||
|
This object identifies the state of the Advanced Virtual Cable Tester.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.4 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx/Rx
pair one. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.5 |
||||||
|
Amplitude of Tx/Rx pair one in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.6 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
one is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.7 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx/Rx
pair two. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.8 |
||||||
|
Amplitude of Tx/Rx pair two in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.9 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
two is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.10 |
||||||
|
Test result code returned from Virtual Cable Test of the Tx/Rx
pair three. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.11 |
||||||
|
Amplitude of Tx/Rx pair three in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.12 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
three is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.13 |
||||||
|
Test result code returned from Virtual Cable Test of Tx/Rx
pair four. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.14 |
||||||
|
Amplitude of Tx/Rx pair four in millivolts when test result codes is
short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.15 |
||||||
|
Distance in meters to fault when test result codes for Tx/Rx pair
four is short or open. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.9.6.1.16 |
cm10gtTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1
·
1 row entry
·
26 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm10gtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm10gtTable'
Table of CM-10G type media converter module's status type information.
Entries of the table, each relating to a separate CM-10G type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-10G type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.2 |
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.3 |
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.4 |
|
This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configurat… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.5 |
|
Media converter module's current switch setting for operation mode.
Data mode is for normal data transmission. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.6 |
|
Media converter module's current switch setting for Link Mode. If
the Operation switch is set to Test, then this object indicates whether the port is in loopback or performing the build in link-test. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.7 |
|
Media converter module's current switch setting for Fiber Fault
Alert. If the Operation switch is set to Test, then this object indicates which port is in test mode |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.8 |
|
This object indicates the current switch setting for Energy Efficient
Ethernet on port 2. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.9 |
|
This object indicates the current switch setting for dip switch 5,
which is unused. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.10 |
|
Media converter module's current fiber link status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.11 |
|
Media converter module's fiber port connector type (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.12 |
|
Media converter module's current fiber auto-negotiation state (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.13 |
|
Media converter module's fiber port speed in megabits per second (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.14 |
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.15 |
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.16 |
|
This object identifies the status of whether light is being received
on the fiber port (port 1) |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.17 |
|
Media converter module's Link Partner Remote Fault status (port 1). This object
only applies to SFP modules running at 1G, with auto-negotiation enabled. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.18 |
|
Media converter module's current fiber link status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.19 |
|
Media converter module's fiber port connector type (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.20 |
|
Media converter module's current fiber auto-negotiation state (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.21 |
|
Media converter module's fiber port speed in megabits per second (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.22 |
|
If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex setting. If auto-negotiation is not complete then the value returned should be ig… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.23 |
|
If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If auto-negotiation is not complete then the value returned should be igno… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.24 |
|
Media converter module's copper Link Partner Remote Fault status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.25 |
|
Media converter module's current port loopback mode setting. Writing to this
object will change the current settings. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.26 |
|
Media converter module's current port test mode setting.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.27 |
cm10gtConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2
·
1 row entry
·
22 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm10gtConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm10gtConfigTable'
Table of CM-10G type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-10G type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-10G type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.5 |
||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.6 |
||||||||
|
This object identifies the wither fiber auto-negotiation is
enabled for both ports. This only applies if 1G SFP modules are in use. This object is read-only if the media module's ConfigMode jumper is set to hardwareSw… |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.7 |
||||||||
|
This object identifies a user definable name for port 1.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.8 |
||||||||
|
This object identifies whether port 1 is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.9 |
||||||||
|
This object identifies the whether FEC control is enabled for this
port. This config option only applies for an XFP module. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.10 |
||||||||
|
This object identifies the FEC Amplitude value for this port. This
config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: -128-127 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.11 |
||||||||
|
This object identifies the FEC phase value for this port. This
config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: -128-127 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.12 |
||||||||
|
This object identifies whether Wavelength fine tuning is enabled for
this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.13 |
||||||||
|
This object identifies Wavelength fine tuning value for this port.
This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.14 |
||||||||
|
This object identifies whether channel number fine tuning is enabled
for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.15 |
||||||||
|
This object identifies the channel number fine tuning value for this
port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.16 |
||||||||
|
This object identifies the whether TX Dither control is enabled on
this port. If not enabled the default TX Dither value will be used. This object is read-only if the media module's ConfigMode jumper is set to hardware… |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.17 |
||||||||
|
This object identifies the whether TX Dither is enabled for this
port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.18 |
||||||||
|
This object identifies a user definable name for port 2.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.19 |
||||||||
|
This object identifies whether port 2 is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.20 |
||||||||
|
This object identifies the duplex settings for the copper port.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.21 |
||||||||
|
This object identifies the copper pause (flow control) setting that
is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrical TX or advertise symmetrical and asymmetrical RX. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.22 |
||||||||
|
This object identifies the copper Energy-Efficient Ethernet setting for the media converter module
present in the chassis. |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.23 |
cm10gtLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm10gtLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm10gtLedTable'
Table of CM-10G type media converter module's LED status information.
Entries of the table, each relating to a separate CM-10G type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-10G type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Lo… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.3 |
|
This object identifies the status of the port 1 link (LK1) LED on the
media converter module. Possible status values are: off(0) - No link on(1) - Port link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.4 |
|
This object identifies the status of the port 2 link (LK2) LED on the
media converter module. Possible status values are: off(0) - No link on(1) - Port link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.3.1.5 |
cm4gptTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1
·
1 row entry
·
12 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm4gptTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm4gptTable'
Table of CM-4GPT type media converter module's status type information.
Entries of the table, each relating to a separate CM-4GPT type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-4GPT type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.2 |
|
This object identifies the model of media converter module present in the
chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.3 |
|
This object identifies a static description of the media converter module present
in the chassis |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.4 |
|
This object identifies the media converter module's ConfigMode, set by hardware
jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configurat… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.5 |
|
Media converter module's current switch setting for Link Mode.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.6 |
|
Media converter module's current switch setting for Fiber Fault
Alert. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.7 |
|
Media converter module's current switch setting for Rate Select.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.8 |
|
This object indicates the current switch setting for the 4th, unused switch.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.9 |
|
Media converter module's current fiber link status (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.10 |
|
Media converter module's fiber port connector type (port 1).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.11 |
|
Media converter module's current fiber link status (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.12 |
|
Media converter module's fiber port connector type (port 2).
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.1.1.13 |
cm4gptConfigTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2
·
1 row entry
·
10 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm4gptConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm4gptConfigTable'
Table of CM-4GPT type media converter module's configuration type information.
Entries of the table, each relating to a separate CM-4GPT type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The Slot number the CM-4GPT type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.2 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.3 |
||||||||
|
This object identifies a user configurable name for the media converter module
present in the chassis. |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.4 |
||||||||
|
This object identifies the Link Mode for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.5 |
||||||||
|
This object identifies the Fiber Fault Alert setting for the media
module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
EnableDisableValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.6 |
||||||||
|
This object identifies the Rate Select setting for the media converter module. This object
is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0). |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.7 |
||||||||
|
This object identifies a user definable name for port 1.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.8 |
||||||||
|
This object identifies whether port 1 is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.9 |
||||||||
|
This object identifies a user definable name for port 2.
|
OctetStringr/w Constraints: range: 0-8 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.10 |
||||||||
|
This object identifies whether port 2 is enabled.
|
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.2.1.11 |
cm4gptLedTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk cm4gptLedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::cm4gptLedTable'
Table of CM-4GPT type media converter module's LED status information.
Entries of the table, each relating to a separate CM-4GPT type
media converter module.
media converter module.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The Slot number the CM-4GPT type module is currently inserted
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.2 |
|
This object identifies the status of the power (PWR) LED on the media converter module.
Possible status values are: off(0) - No power to the module onGreen(1) - Power being applied to module blinking(2) - Lo… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.3 |
|
This object identifies the status of the port 1 link (LK1) LED on the
media converter module. Possible status values are: off(0) - No link on(1) - Port link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.4 |
|
This object identifies the status of the port 2 link (LK2) LED on the
media converter module. Possible status values are: off(0) - No link on(1) - Port link present |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.11.3.1.5 |
mcrSfpDmiModuleTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.5
·
1 row entry
·
61 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrSfpDmiModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrSfpDmiModuleTable'
Table of SFP Diagnostic Monitoring Interface information for Optical Transceivers
Entries of the table, each relating to a separate SFP module.
| Column | Syntax | OID |
|---|---|---|
|
The Slot number of the media converter module containing this SFP/XFP
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.2 |
|
Media converter module port index.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.3 |
|
This object identifies the status of the SFP module. If sfpCommFailed
bit is set then the rest of the data in this entry is invalid |
Bits | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.4 |
|
This object identifies the SFP DMI connector type.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.5 |
|
This object identifies the SFP DMI nominal bit rate of fiber
interface, in megabits per second. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.6 |
|
This object identifies the SFP DMI maximum length in meters of media
supported by the fiber transceiver for 9 micron (125 micron jacket) single-mode fiber. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.7 |
|
This object identifies the SFP DMI maximum length in meters of media
supported by the fiber transceiver for 50 micron (125 micron jacket) multi-mode fiber. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.8 |
|
This object identifies the SFP DMI maximum length in meters of media
supported by the fiber transceiver for 62.5 micron (125 micron jacket) multi-mode fiber. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.9 |
|
This object identifies the wavelength of the fiber interface's
optical transceiver, in nanometers. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.10 |
|
This object identifies the current alarm status for SFP DMI internally
measured temperature. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.11 |
|
This object identifies the SFP DMI real time temperature. The value
displayed will be either Celsius or Fahrenheit based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.12 |
|
This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.13 |
|
This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.14 |
|
This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.15 |
|
This object identifies the SFP DMI high temperature warning threshold.
The value displayed will be either Celsius or Fahrenheit based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.16 |
|
This object identifies current alarm status for SFP DMI internally
measured voltage. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.17 |
|
This object identifies the SFP DMI real time voltage in Volts.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.18 |
|
This object identifies the SFP DMI high voltage warning threshold in
Volts |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.19 |
|
This object identifies the SFP DMI high voltage warning threshold in
Volts |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.20 |
|
This object identifies the SFP DMI high voltage warning threshold in
Volts |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.21 |
|
This object identifies the SFP DMI high voltage warning threshold in
Volts |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.22 |
|
This object identifies current alarm status for SFP DMI internally
measured transmit bias current in milliamps. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.23 |
|
This object identifies the SFP DMI high TX Bias current in milliamps.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.24 |
|
This object identifies the SFP DMI high TX Bias current warning
threshold in milliamps. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.25 |
|
This object identifies the SFP DMI high TX Bias current alarm
threshold in milliamps. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.26 |
|
This object identifies the SFP DMI low TX Bias current warning
threshold in milliamps. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.27 |
|
This object identifies the SFP DMI low TX Bias current alarm
threshold in milliamps. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.28 |
|
This object identifies current alarm status for SFP DMI internally
measured transmit power. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.29 |
|
This object identifies the SFP DMI real time TX output power.
The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.30 |
|
This object identifies the SFP DMI high TX output power warning
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.31 |
|
This object identifies the SFP DMI high TX output power alarm
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.32 |
|
This object identifies the SFP DMI low TX output power warning
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.33 |
|
This object identifies the SFP DMI low TX output power alarm
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.34 |
|
This object identifies current alarm status for SFP DMI internally
measured receive power. |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.35 |
|
This object identifies the SFP DMI real time RX received optical power.
The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.36 |
|
This object identifies the SFP DMI high RX received optical warning
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.37 |
|
This object identifies the SFP DMI high RX received optical alarm
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.38 |
|
This object identifies the SFP DMI low RX received optical warning
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.39 |
|
This object identifies the SFP DMI low RX received optical alarm
threshold. The value displayed will be either millwatts or Dbm based on your current regional display settings. |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.40 |
|
This object identifies the status of the SFP module. If sfpCommFailed
value is set then the rest of the data in this entry is invalid 0x80 - sfpModuleInserted 0x40 - sfpCommFailed 0x20 - sfpDmiSupported |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.41 |
|
This object identifies the SFP DMI serial number.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.42 |
|
This object identifies the SFP DMI serial number.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.43 |
|
This object identifies the SFP DMI serial number.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.44 |
|
This object identifies the type of value that is being measured by
the Auxillary 1 registers on the XFP |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.45 |
|
This object identifies current alarm status for the XFP Aux1 registers
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.46 |
|
This object identifies the XFP DMI real time values for the Aux1
registers |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.47 |
|
This object identifies the XFP DMI high warning threshold for Aux1
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.48 |
|
This object identifies the XFP DMI alarm alarm threshold for Aux1
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.49 |
|
This object identifies the XFP DMI low warning threshold for Aux1
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.50 |
|
This object identifies the XFP DMI low alarm threshold for Aux1
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.51 |
|
This object identifies the type of value that is being measured by
the Auxillary 1 registers on the XFP |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.52 |
|
This object identifies current alarm status for the XFP Aux2 registers
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.5.1.53 |
|
This object identifies the SFP DMI real time values for the Aux2
registers |
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.54 |
|
This object identifies the XFP DMI high warning threshold for Aux2
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.55 |
|
This object identifies the XFP DMI alarm alarm threshold for Aux2
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.56 |
|
This object identifies the XFP DMI low warning threshold for Aux2
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.57 |
|
This object identifies the XFP DMI low alarm threshold for Aux2
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.58 |
|
This object specifies the XFP minimum bit rate.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.59 |
|
This object specifies the XFP maximum bit rate.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.60 |
|
This object specifies the link length that is supported by the fiber
transceiver using extended bandwidth 50 micron core (125 micron jacket) multimode fiber |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.61 |
|
This object identifies the maximum length in meters that is
supported by the SFP/XFP interface using copper cable. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.1.5.1.62 |
mcrAlarmsWarningsTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.6
·
1 row entry
·
9 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrAlarmsWarningsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrAlarmsWarningsTable'
Table of outstanding alarms and warnings.
Entries of the table, each relating to a separate alarm or warning.
| Column | Syntax | OID |
|---|---|---|
|
This object identifies the sequence in which the alarms or
warnings were generated. Gaps in the sequence numbers are normal. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.2 |
|
This object identifies the alert/Trap number associated with
this alarm/warning. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.3 |
|
This object identifies the severity level of the alarm/warning.
Value will be one of the top three levels. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.4 |
|
This object identifies the flags defining the alarm/warning.
0x00000002 - chassis type alert 0x00000004 - Power Supply Monitoring Unit type alert 0x00000008 - PSMU power supply type alert 0x00000010 - PSMU fan type aler… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.5 |
|
This object identifies the chassis number associated with this
alarm/warning. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.6 |
|
This object identifies the Hardware slot/bay location of the
hardware associated with this alarm or warning. - 0 indicates alarm/warning occurred on the chassis backplane. - If AlarmWarnFlags indicates a power supply th… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.7 |
|
This object identifies the time stamp of when the alarm/warning
was reported. (in seconds since the Epoch, defined as 0:00:00 UTC on the morning of January 1, 1970), that the alert was reported on the MCR-MGT.) |
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.8 |
|
This object identifies the alarm/warning message string
which will contain any values of bound variables. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.9 |
|
This object identifies the location of the media
port associated with this alarm or warning. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.6.1.10 |
mcrMediaPortTable
table.1.3.6.1.4.1.1966.21.1.1.1.1.7
·
1 row entry
·
15 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mcrMediaPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mcrMediaPortTable'
Table of general port status information.
Entries of the table, each relating to a separate media converter module port.
| Column | Syntax | OID |
|---|---|---|
|
Slot number for the media converter module containing this port.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.7.1.2 |
|
Port number on media card. Valid values are 1 to the highest number
of ports available on a media card. There are usually two ports |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.1.7.1.3 |
|
This object identifies the model name of the module containing
this port. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.7.1.4 |
|
This object identifies the name configured for this port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.1.7.1.5 |
|
This object indicates whether the port has been enabled.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.6 |
|
The type of port (copper, fiber, etc.) .
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.7 |
|
The port's current link status.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.8 |
|
The port's connector type
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.9 |
|
The port's auto-negotiation state
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.10 |
|
If the port auto-negotiation state is complete then this object
indicates the ports current auto-negotiated speed setting. If auto-negotiation is not complete then the value returned should be ignored |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.11 |
|
If port auto-negotiation state is complete then this object
indicates the media converter module's current auto-negotiated duplex setting for this port. If auto-negotiation is not complete then the value returned should… |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.12 |
|
If port auto-negotiation state is complete then this object indicates
the media converter module's current auto-negotiated pause setting for this port. If auto-negotiation is not complete then the value returned should … |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.13 |
|
This port's Link Partner Remote Fault status or Far End Fault status
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.14 |
|
The type of port (copper, fiber, etc.) .
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.15 |
|
The physical networking protocol used by the port.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.7.1.16 |
gatewayTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.2
·
1 row entry
·
7 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk gatewayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::gatewayTable'
Table of configured gateway.
Entries of the table, each relating to a separate configured gateway.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
gatewayIndex
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.2 |
||||||||
|
You can specify up to twenty hosts to act as gateways
in your network. Each gateway host must be defined in the management module host table. |
OctetStringr/w Constraints: range: 0-14 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.3 |
||||||||
|
Specify the type of gateway:
Default-A gateway which provides general access beyond your local network. Host-A gateway reserved for accessing a specific host external to your local network. Network-A gateway… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.4 |
||||||||
|
When the gateway is a Host or Network gateway, you must
specify the IP address of the target host machine/network. |
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.5 |
||||||||
|
When the gateway is a Network gateway, you must specify the
subnet/prefix bits for that network. If the IP address is IPv4, then the Subnet/Prefix Bits range is 0-32. If the IP address is IPv6, then the Subnet/Prefix Bi… |
Integer32r/w Constraints: range: 0-128 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.6 |
||||||||
|
The interface that the management module is going to use to access the
Remote Host. |
OctetStringr/w Constraints: range: 0-20 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.2.1.7 |
hostTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.3
·
1 row entry
·
5 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk hostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::hostTable'
The hosts Group table.
An entry in the host table, each relating to a separate host.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The table entry number for this host.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.2 |
||||||||
|
The host name used for this host entry.
To delete an entry, blank out this field. If blank, this entry is currently unused. |
OctetStringr/w Constraints: range: 0-14 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.3 |
||||||||
|
The host IP address used for this entry.
|
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.4 |
||||||||
|
The host full qualified domain name for the host entry.
If blank, this entry is currently unused. |
OctetStringr/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.3.1.5 |
dnsTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.4
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk dnsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::dnsTable'
Table of DNS hosts
Entries of the table, each relating to a separate DNS host.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
DNS host index
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). On… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.2 |
||||||||
|
You can specify the IP addresses for up to two DNS
(Domain Name Servers) hosts in your network. The first DNS entry in the list is the primary DNS and the second DNS entry is the secondary server. |
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.3 |
||||||||
|
Activates/deactivates a DNS entry.
|
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.4.1.4 |
dynamicDNSSSLCipherTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18
·
1 row entry
·
7 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk dynamicDNSSSLCipherTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::dynamicDNSSSLCipherTable'
SSL Cipher.
An entry in the dynamicDNSSSLCipherTable, each relating to a cipher entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The cipher priority. 1- highest 5 - lowest.
|
Integer32 Constraints: range: 1-5 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). … |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.2 |
||||||||
|
SSL Encryption. None is not allowed for priority 1.
Any will use the first encryption format that can be negotiated. The default is any. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.3 |
||||||||
|
The minimum key size value that will be used for
the specified encryption type. The default is 40. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.4 |
||||||||
|
The maximum key size value that will be used for the
specified encryption type. The default is 256. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.5 |
||||||||
|
The type of key to exchange for the encryption format:
Any-Any key exchange that is valid is used (this does not, however, include ADH keys). RSA-This is an RSA key exchange using an RSA key and certificate. E… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.6 |
||||||||
|
Select the key-hashing for message authentication method
for your encryption type: Any, MD5, or SHA1. The default is Any. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.5.18.1.7 |
ipv6AddressTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2
·
1 row entry
·
6 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk ipv6AddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::ipv6AddressTable'
IPv6 custom address table.
IPv6 custom entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Custom IPv6 address index.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.2 |
||||||||
|
Either enter a network prefix that the Device
Server will use to derive an IPv6 address using the Device Server's MAC address (must turn ipv6AddressAuto1 on) or enter a specific IPv6 address. |
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.3 |
||||||||
|
The IPv6 prefix bits of either the network or
IPv6 address. |
Integer32r/w Constraints: range: 0-128 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.4 |
||||||||
|
When on, the management module will derive
an IPv6 address from the entered network prefix and the management module's MAC address. |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.5 |
||||||||
|
When on, the management module will include
the IPv6 address in router advertisements. |
OnOffValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.2.1.6 |
interfacev6StatsTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3
·
1 row entry
·
5 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk interfacev6StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::interfacev6StatsTable'
The interface IPv6 Group table.
An entry in the interface IPv6 table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The IPv6 interface index.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.1 |
|
The IPv6 interface name.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.2 |
|
The IPv6 interface IP address.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.3 |
|
The IPv6 interface Prefix bits
|
Integer32 Constraints: range: 0-128 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.4 |
|
The IPv6 interface scope.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.2.1.6.3.1.5 |
ipv6TunnelTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4
·
1 row entry
·
5 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk ipv6TunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::ipv6TunnelTable'
IPv6 tunnel table.
IPv6 tunnel entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The IPv6 tunnel index.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.2 |
||||||||
|
The name of the IPv6 tunnel. Maximum 16 alphanumeric characters.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.3 |
||||||||
|
The method or protocol that is used to create the IPv6 tunnel.
o Manual-When specified, the management module will manually create the IPv6 tunnel to the specified Remote Host through the specified Interface. o ip6to… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.4 |
||||||||
|
The IPv4 host that can access the IPv6 network when the Mode
is Manual. The Teredo server when the Mode is Teredo. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.2.1.6.4.1.5 |
snmpCommunityTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4
·
1 row entry
·
5 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk snmpCommunityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::snmpCommunityTable'
Table of SNMP communities configured for the MCR-MGT agent
Entries of the table, each relating to a separate SNMP community
definition
definition
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The MCR-MGT agent community index
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.2 |
||||||||
|
A name that will be sent to the management module from an SNMP
manager. This name will define the permissions of the manager. |
OctetStringr/w Constraints: range: 0-14 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.3 |
||||||||
|
The IP address of the SNMP manager that will send requests to
the management module. If the address is 0.0.0.0, any SNMP manager with the Community Name can access the management module. |
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.4 |
||||||||
|
Permits the management module to respond to SNMP requests by:
None -There is no response to requests from SNMP. Readonly -Responds only to Read requests from SNMP. Readwrite -Responds to both Read and Write requests fro… |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.2.4.4.1.5 |
authIpHostTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk authIpHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::authIpHostTable'
The hosts Group table.
An entry in the AuthIpHostTable, each relating to a IP host.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The table entry number for this host.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.2 |
||||||||
|
The host IP address used for this entry.
|
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.3 |
||||||||
|
The host IP entry description.
|
OctetStringr/w Constraints: range: 0-21 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.3.1.4 |
authMacHostTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4
·
1 row entry
·
4 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk authMacHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::authMacHostTable'
The hosts Group table.
An entry in the AuthIpHostTable, each relating to a host.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The table entry number for this host.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.2 |
||||||||
|
The host MAC address used for this entry.
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.3 |
||||||||
|
The host MAC address entry description.
|
OctetStringr/w Constraints: range: 0-21 |
.1.3.6.1.4.1.1966.21.1.1.1.2.2.5.4.1.4 |
snmpTrapHostTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4
·
1 row entry
·
8 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk snmpTrapHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::snmpTrapHostTable'
Table of SNMP Trap Hosts information.
Entries of the table, each relating to a separate SNMP trap host.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the SNMP trap host index.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.2 |
||||||||
|
Defines the hosts (by IP address) that will receive trap messages
generated by the management module. |
Ipv4v6Addressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.3 |
||||||||
|
Defines the UDP port number the SNMP trap host will listen on to
receive trap messages generated by the management module. |
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.4 |
||||||||
|
Defines the SNMP version of the traps sent to this host. If
snmpTrapV3 is selected then the SNMP trap v3 user |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.5 |
||||||||
|
If set to snmpInform(1) the management module will send traps via an
INFORM-PDU, expecting a response from the trap host, retransmitting if required. Otherwise it will send them via a TRAP-PDU or TRAP2-PDU. This object … |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.6 |
||||||||
|
An arbitrary trap community name. This object is ignored for SNMP v3
|
OctetStringr/w Constraints: range: 0-14 |
.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.7 |
||||||||
|
If set to No, the management module will not use this
table entry to send traps. |
YesNoValuer/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.3.3.4.1.8 |
localUserAccountsTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.4.6
·
1 row entry
·
5 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk localUserAccountsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::localUserAccountsTable'
Table of locally defined user information
Entries of the table, each relating to separate user defined locally.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The table entry number for this user.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.1 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). O… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.2 |
||||||||
|
The user name.
To delete a user, set this field to blank. If blank, this entry is currently unused. |
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.3 |
||||||||
|
The password for the local user.
|
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.4 |
||||||||
|
Admin:
Total access to the management module. More than one admin user account can exist, but we recommend that you only have one. operator: Full read only access to configuration and limited control commands |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.4.6.1.5 |
localUsersStatusTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.4.7
·
1 row entry
·
6 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk localUsersStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::localUsersStatusTable'
Table of locally defined user information
Entries of the table, each relating to separate user defined locally.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The table entry number for this user status.
|
GenericTableIndex Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.1 |
|
The user name. To delete a user, set this field to blank. If blank,
this entry is currently unused. |
OctetString Constraints: range: 0-16 |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.2 |
|
Defines the management protocol used to access the management module
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.3 |
|
This object specifies the remote IP address user management session.
|
Ipv4v6Address Type Constraints: range: 0..255 |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.4 |
|
This object identifies the date and time that the current user's
management session started. |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.5 |
|
Admin:
Total access to the management module. More than one admin user account can exist, but we recommend that you only have one. operator: Full read only access to configuration and limited control commands |
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.2.4.7.1.6 |
nettxfrTable
table.1.3.6.1.4.1.1966.21.1.1.1.2.6.3
·
1 row entry
·
12 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk nettxfrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::nettxfrTable'
Table of snmp file transfer sessions.
Entries of the table, each relating to a SNMP file transfer session.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
This indicates if the net transfer is to be loaded to the management
module or saved from the management module. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.1 |
|
This field indicates the status of the nettxfr process.
A value of start(1) should be written to this field to start the nettxfr process with the specified parameters in the rest of this group. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.2 |
|
This indicates if the net transfer is to be loaded to the management
module or saved from the management module. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.3 |
|
This indicates the type of file to be transfered to/from the management module.
|
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.4 |
|
The host name or IP address of the server that contains the file to be
transfered to/from the management module.. If you use a host name, it must exist in the management module's host table or be resolved by DNS. |
OctetStringr/w Constraints: range: 0-46 |
.1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.5 |
|
The path and file name (do not use a drive letter), relative to the default
path of your TFTP server software, of the file to be transfered to/from the management module. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.6 |
|
Specifies the slot number of the Media Converter Module to which the
firmware will be transfered. |
SlotNumberr/w Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.7 |
|
Specifies the user login name who owns the ssh public key that is to
be transfered to the management module. |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.8 |
|
Specifies the authentication method used by the ssh-server public key
that is to be transfered to/from the management module |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.9 |
|
Specifies the type of SSL file to be transfered to the management module.
These files are needed if you are using the secure version of the WebManager (HTTPS), or LDAP authentication with TLS. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.10 |
|
Specifies whether this net transfer session entry is in use. If a
manager tries to write a 1 to this field and the session is already in use, then an error is returned. |
Enumerationr/w | .1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.11 |
|
Specifies a UDP port number for the TFTP host server.
Default is 69. |
Unsigned32r/w Constraints: range: 1-65536 |
.1.3.6.1.4.1.1966.21.1.1.1.2.6.3.1.12 |
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1
·
1 row entry
·
7 columns
Uses the perle variant from
Command help
/opt/observium/mibs/perle.
Walk mgtChassisSlotPowerScheduleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PERLE-MCR-MGT-MIB' -M '/opt/observium/mibs/perle:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PERLE-MCR-MGT-MIB::mgtChassisSlotPowerScheduleTable'
Table of power schedule configuration for chassis slots. (Not applicable to 2-slot chassis.)
Entries of the table, each relating to a separate slot in a chassis.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This object identifies the chassis slot number.
|
SlotNumber Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.2 |
||||||||
|
This object identifies the day of the week.
|
Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.3 |
||||||||
|
When you perform a GET on this variable, one of
the following values will be returned: 1-Indicates that the container folder is active with no changes. 2-Indicates that the container folder is active with change(s). Onc… |
ContainerStatusr/w Type Values:
|
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.4 |
||||||||
|
This object identifies the hour (0-23) of the day to schedule a
power on of the chassis slot |
Integer32r/w Constraints: range: 0-23 |
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.5 |
||||||||
|
This object identifies the minute (0-59) of the hour to schedule a
power on of the chassis slot |
Integer32r/w Constraints: range: 0-59 |
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.6 |
||||||||
|
This object identifies the hour (0-23) of the day to schedule a
power off of the chassis slot |
Integer32r/w Constraints: range: 0-23 |
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.7 |
||||||||
|
This object identifies the minute (0-59) of the hour to schedule a
power off of the chassis slot |
Integer32r/w Constraints: range: 0-59 |
.1.3.6.1.4.1.1966.21.1.1.1.2.9.1.1.8 |