cm1000mmHwJmp5ConfigMode
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.5
Object
column
Enumeration
This object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration control from the management module's software and all configuration control comes from the media converter module's hardware switches or jumpers.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cm1000mmFixedEntry
- Table
- cm1000mmFixedTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm1000mmHwSw5Loopback2 Media converter module's current switch setting for loopback (fiber port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.10 |
| cm1000mmFiber1LinkStatus Media converter module's current fiber link status (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.12 |
| cm1000mmFiber1ConnType Media converter module's fiber port connector type (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.13 |
| cm1000mmFiber1AutoNegState Media converter module's current fiber auto-negotiation state (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.14 |
| cm1000mmFiber1Speed Media converter module's fiber port speed in megabits per second (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.15 |
| cm1000mmFiber1Duplex If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.16 |
| cm1000mmFiber1PauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.17 |
| cm1000mmFiber1LPRFStatus Media converter module's fiber Link Partner Remote Fault status (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.18 |
| cm1000mmFiber1ReceiveStatus This object identifies the status of whether light is being received
on the fiber port (port 1) | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.19 |
| cm1000mmSlotIndex The Slot number the CM-1000MM type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.2 |
| cm1000mmFiber2LinkStatus Media converter module's current fiber link status (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.20 |
| cm1000mmFiber2ConnType Media converter module's fiber port connector type (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.21 |
| cm1000mmFiber2AutoNegState Media converter module's current fiber auto-negotiation state (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.22 |
| cm1000mmFiber2Speed Media converter module's fiber port speed in megabits per second (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.23 |
| cm1000mmFiber2Duplex If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.24 |
| cm1000mmFiber2PauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.25 |
| cm1000mmFiber2LPRFStatus Media converter module's fiber Link Partner Remote Fault status (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.26 |
| cm1000mmFiber2ReceiveStatus This object identifies the status of whether light is being received
on the fiber port (port 2) | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.27 |
| cm1000mmFiberLoopBack Media converter module's current fiber loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's Con… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.28 |
| cm1000mmModelname This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.3 |
| cm1000mmModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.4 |
| cm1000mmHwSw1FiberAutoNeg Media converter module's current switch setting for fiber Auto-Negotiation. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.6 |
| cm1000mmHwSw2LinkMode Media converter module's current switch setting for Link Mode. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.7 |
| cm1000mmHwSw3FiberFaultAlert Media converter module's current switch setting for Fiber Fault Alert. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.8 |
| cm1000mmHwSw4Loopback1 Media converter module's current switch setting for loopback (fiber port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.6.1.1.9 |