cm10gtHwJmp5ConfigMode
PERLE-MCR-MGT-MIB ·
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.5
Object
column
Enumeration
This object identifies the media converter module's ConfigMode, set by hardware jumper J5 on the media converter module. When this object is set to hardwareSwitches(0), the media converter module will disable configuration control from the management module's software and all configuration control comes from the media converter module's hardware switches or jumpers.
Context
- MIB
- PERLE-MCR-MGT-MIB
- OID
.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cm10gtEntry
- Table
- cm10gtTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cm10gtHwSw5Unused This object indicates the current switch setting for dip switch 5,
which is unused. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.10 |
| cm10gtPort1LinkStatus Media converter module's current fiber link status (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.11 |
| cm10gtPort1ConnType Media converter module's fiber port connector type (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.12 |
| cm10gtPort1AutoNegState Media converter module's current fiber auto-negotiation state (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.13 |
| cm10gtPort1Speed Media converter module's fiber port speed in megabits per second (port 1). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.14 |
| cm10gtPort1Duplex If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.15 |
| cm10gtPort1PauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.16 |
| cm10gtPort1ReceiveStatus This object identifies the status of whether light is being received
on the fiber port (port 1) | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.17 |
| cm10gtPort1LPRFStatus Media converter module's Link Partner Remote Fault status (port 1). This object
only applies to SFP modules running at 1G, with auto-negotiation enabled. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.18 |
| cm10gtPort2LinkStatus Media converter module's current fiber link status (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.19 |
| cm10gtSlotIndex The Slot number the CM-10G type module is currently inserted | column | SlotNumber | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.2 |
| cm10gtPort2ConnType Media converter module's fiber port connector type (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.20 |
| cm10gtPort2AutoNegState Media converter module's current fiber auto-negotiation state (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.21 |
| cm10gtPort2Speed Media converter module's fiber port speed in megabits per second (port 2). | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.22 |
| cm10gtPort2Duplex If fiber auto-negotiation state is complete then this object
indicates the media converter module's current fiber auto-negotiated duplex
setting. If auto-negotiation is not comple… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.23 |
| cm10gtPort2PauseEnh If fiber auto-negotiation state is complete then this object indicates
the media converter module's current fiber auto-negotiated pause setting. If
auto-negotiation is not complet… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.24 |
| cm10gtPort2LPRFStatus Media converter module's copper Link Partner Remote Fault status. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.25 |
| cm10gtPortLoopBack Media converter module's current port loopback mode setting. Writing to this
object will change the current settings. This object is read-only if
the media converter module's Conf… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.26 |
| cm10gtPortTestMode Media converter module's current port test mode setting. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.27 |
| cm10gtModelname This object identifies the model of media converter module present in the
chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.3 |
| cm10gtModelDesc This object identifies a static description of the media converter module present
in the chassis | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.4 |
| cm10gtHwSw1OperationMode Media converter module's current switch setting for operation mode.
Data mode is for normal data transmission. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.6 |
| cm10gtHwSw2LinkMode Media converter module's current switch setting for Link Mode. If
the Operation switch is set to Test, then this object indicates
whether the port is in loopback or performing t… | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.7 |
| cm10gtHwSw3FiberFaultAlert Media converter module's current switch setting for Fiber Fault
Alert. If the Operation switch is set to Test, then this object
indicates which port is in test mode | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.8 |
| cm10gtHwSw4EnergyEfficentEthernet This object indicates the current switch setting for Energy Efficient
Ethernet on port 2. | column | Enumeration | .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.1.1.9 |