cm10gtConfigStatus

PERLE-MCR-MGT-MIB · .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.3

Object

column r/w ContainerStatus

When you perform a GET on this variable, one of
the following values will be returned:
1-Indicates that the container folder is active with no changes.
2-Indicates that the container folder is active with change(s).
Once you have completed setting the variables in a folder, you
will want to submit your changes to the management module. To do
this, set the Status variable to 4. If you want to discard the
changes, set the Status variable to 6.
4-Indicates that the changes in the container folder are to be
  submitted to the management module, verified and and saved to flash.
6-Indicates that the changes in the container folder are to be
  discarded.

Context

MIB: PERLE-MCR-MGT-MIB
OID: .1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.3
Type: column
Access: readwrite
Status: current
Parent: cm10gtConfigEntry
Table: cm10gtConfigTable
Siblings: 21

Syntax

ContainerStatus

Source: ContainerStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	modified
`4`	applyChanges
`6`	discardChanges

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cm10gtConfigPort1FecEnable This object identifies the whether FEC control is enabled for this port. This config option only applies for an XFP module. This object is read-only if the media module's Confi…	column	YesNoValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.10`
cm10gtConfigPort1FecAmplitude This object identifies the FEC Amplitude value for this port. This config option only applies for an XFP module. This object is read-only if the media converter module's ConfigM…	column	Integer32	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.11`
cm10gtConfigPort1FecPhase This object identifies the FEC phase value for this port. This config option only applies for an XFP module. This object is read-only if the media converter module's ConfigMode …	column	Integer32	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.12`
cm10gtConfigPort1WavelengthEnable This object identifies whether Wavelength fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0).	column	YesNoValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.13`
cm10gtConfigPort1WavelengthValue This object identifies Wavelength fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).	column	Integer32	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.14`
cm10gtConfigPort1ChannelEnable This object identifies whether channel number fine tuning is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0).	column	YesNoValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.15`
cm10gtConfigPort1ChannelNumber This object identifies the channel number fine tuning value for this port. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0…	column	Integer32	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.16`
cm10gtConfigPort1TxDitherEnable This object identifies the whether TX Dither control is enabled on this port. If not enabled the default TX Dither value will be used. This object is read-only if the media module…	column	YesNoValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.17`
cm10gtConfigPort1TxDitherValue This object identifies the whether TX Dither is enabled for this port. This object is read-only if the media module's ConfigMode jumper is set to hardwareSwitches(0).	column	EnableDisableValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.18`
cm10gtConfigPort2Name This object identifies a user definable name for port 2.	column	OctetString	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.19`
cm10gtConfigSlotIndex The Slot number the CM-10G type module is currently inserted	column	SlotNumber	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.2`
cm10gtConfigPort2Enable This object identifies whether port 2 is enabled.	column	YesNoValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.20`
cm10gtConfigPort2CopperDuplex This object identifies the duplex settings for the copper port.	column	Enumeration	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.21`
cm10gtConfigPort2CopperPauseEnh This object identifies the copper pause (flow control) setting that is a advertised. The settings can be disabled, advertise symmetrical, advertise asymmetrical TX or advertise sy…	column	Enumeration	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.22`
cm10gtConfigPort2CopperEnergyEfficientEthernet This object identifies the copper Energy-Efficient Ethernet setting for the media converter module present in the chassis.	column	OnOffValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.23`
cm10gtConfigModuleName This object identifies a user configurable name for the media converter module present in the chassis.	column	OctetString	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.4`
cm10gtConfigLinkMode This object identifies the Link Mode for the media converter module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).	column	Enumeration	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.5`
cm10gtConfigFiberFaultAlert This object identifies the Fiber Fault Alert setting for the media module. This object is read-only if the media converter module's ConfigMode jumper is set to hardwareSwitches(0).	column	EnableDisableValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.6`
cm10gtConfigFiberAutoNeg This object identifies the wither fiber auto-negotiation is enabled for both ports. This only applies if 1G SFP modules are in use. This object is read-only if the media module's…	column	EnableDisableValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.7`
cm10gtConfigPort1Name This object identifies a user definable name for port 1.	column	OctetString	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.8`
cm10gtConfigPort1Enable This object identifies whether port 1 is enabled.	column	YesNoValue	`.1.3.6.1.4.1.1966.21.1.1.1.1.4.10.2.1.9`