LUXN-MIB Table View

This table represents the number of shelves and the
number of slots per shelf in the chassis.

mfgShelfEntry row .1.3.6.1.4.1.4253.1.1.10.1

Specifies the index for each row in the table below

Indexes

mfgShelfID

Column	Syntax	OID
mfgShelfIDmandatory Integer ID of each shelf in the chassis. The shelf number is always one for both GM1608 and GM3217. In the case of of GM3234, the bottom shelf is 1 while the top shelf is 2. As for GMX128, the order of numbering is fr…	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.1.10.1.1
mfgNumSlotsmandatory total number of slots in a given shelf.	CardSlot Type Constraints: range: 1..17	.1.3.6.1.4.1.4253.1.1.10.1.2

This table represents the number of sub divisions
and the size of each subdivision in ROM memory

cpSubDivEntry row .1.3.6.1.4.1.4253.1.2.7.1

Specifies the index for each row in the table below

Indexes

cpSubDivIndex

Column	Syntax	OID
cpSubDivIndexmandatory Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.4253.1.2.7.1.1
cpSubDivDescrmandatory Display Name of each Sub Division in ROM	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.2.7.1.2
cpSubDivSizemandatory Size of each sub division in ROM in bytes	Integer32 Constraints: range: 1-3145728	.1.3.6.1.4.1.4253.1.2.7.1.3
cpSubDivOffsetmandatory Starting address of each sub division in the ROM in HEX notation.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.4253.1.2.7.1.4
cpSubDivImgVersionmandatory Display Version of each Images in ROM.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.2.7.1.5
cpSubDivImgDBVersionmandatory Display Database Version of each Images in ROM.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.2.7.1.6

This table represents the information for each
active or standby communication processor

cpEntry row .1.3.6.1.4.1.4253.1.2.8.1

Specifies the index for each row in the table below

Indexes

cpCardShelf cpCardSlot

Column	Syntax	OID
cpCardShelfmandatory The shelf the card is in.	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.2.8.1.1
cpCardSlotmandatory The slot within the shelf the card is in.	CardSlot Type Constraints: range: 1..17	.1.3.6.1.4.1.4253.1.2.8.1.2
cpModemandatory Type of the communication processor. The valid types are Active or Standby.	RedundancyMode Type Values: 1 active 2 standby	.1.3.6.1.4.1.4253.1.2.8.1.3
cpDsgntdModemandatory Designation Type of the communication processor. The valid types are Active or Standby.	RedundancyMode Type Values: 1 active 2 standby	.1.3.6.1.4.1.4253.1.2.8.1.4
cpStatemandatory The state of the CP card.	CardState Type Values: 1 empty 2 online 3 offline 4 loopback 5 diag	.1.3.6.1.4.1.4253.1.2.8.1.5
cpMacAddrmandatory MAC address of the Communication processor in HEX	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.4253.1.2.8.1.6
cpNamemandatory Display (Network) name of the Communication processor	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4253.1.2.8.1.7
cpMfgDatemandatory Date and Time of manufacturing of the CP card	DateAndTime Type Constraints: range: 0..20	.1.3.6.1.4.1.4253.1.2.8.1.8
cpSerialNummandatory Serial # of the CP card.	SerialString Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.2.8.1.9
cpModelTypemandatory Model type of the CP.	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.2.8.1.10
cpFWVersionIDmandatory The current version string of the CP FW code	VersionString Type Constraints: range: 0..12	.1.3.6.1.4.1.4253.1.2.8.1.11
cpSetStatemandatory Instruct the CP to do a warmboot. A get on this will always return an other.	RebootTyper/w Type Values: 1 other 2 warmboot	.1.3.6.1.4.1.4253.1.2.8.1.12
cpHWNamemandatory Display Hardware name of the CP Card.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.4253.1.2.8.1.13
cpCleiNummandatory CLEI number of the mux/dmux Card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.2.8.1.14
cpModelNummandatory Model number of the CP card. Up to 15 characters	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.2.8.1.15

This table represents the number of sub divisions
and the size of each subdivision in ROM memory
of redundant (standby) MPM

cpRedunSubDivEntry row .1.3.6.1.4.1.4253.1.2.38.1

Specifies the index for each row in the table below

Indexes

cpRedunSubDivIndex

Column	Syntax	OID
cpRedunSubDivIndexmandatory Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.4253.1.2.38.1.1
cpRedunSubDivDescrmandatory Display Name of each Sub Division in ROM	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.2.38.1.2
cpRedunSubDivImgVersionmandatory Display Version of each Images in ROM.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.2.38.1.3
cpRedunSubDivImgDBVersionmandatory Display Database Version of each Images in ROM.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.2.38.1.4

This table represents the number of sub divisions
and the size of each subdivision in ROM memory

ccSubDivEntry row .1.3.6.1.4.1.4253.1.3.4.1

Specifies the index for each row in the table below

Indexes

ccSubDivIndex

Column	Syntax	OID
ccSubDivIndexmandatory Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.4253.1.3.4.1.1
ccSubDivDescrmandatory Display Name of each Sub Division in ROM	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.3.4.1.2
ccSubDivSizemandatory Size of each sub division in ROM in kilobytes	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.4253.1.3.4.1.3
ccSubDivOffsetmandatory Starting address of each sub division in the ROM in HEX notation.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.4253.1.3.4.1.4

This table represents the information for each
channel card

ccEntry row .1.3.6.1.4.1.4253.1.3.6.1

Specifies the index for each row in the table below

Indexes

ccCardLocation ccCardShelf ccCardSlot

Column	Syntax	OID
ccCardLocationmandatory Location of the card. Valid values are: Local in the same chassis, or remote to this chassis	CardLocation Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.3.6.1.1
ccCardShelfmandatory The shelf the card is in. Valid values are: 1 to 2	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.3.6.1.2
ccCardSlotmandatory The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To delete this card, set this variable to 0.	SlotInputr/w Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.3
ccMfgDatemandatory Date and Time of calibration of the CC card	DateAndTime Type Constraints: range: 0..20	.1.3.6.1.4.1.4253.1.3.6.1.4
ccSerialNummandatory Serial # of the CC card.	SerialString Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.5
ccModelTypemandatory Model type of the channel card.	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.3.6.1.6
ccNamemandatory User configurable name of the channel card	CardNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.3.6.1.7
ccFWVersionIDmandatory The current version string of the CC FW code	VersionString Type Constraints: range: 0..12	.1.3.6.1.4.1.4253.1.3.6.1.8
ccMfgBiasCurrentmandatory Bias current for the optical laser. This is the preset manufacturing value	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.9
ccMfgModulationmandatory The frequency modulation for the optical laser. This value is the preset manufacturing value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.10
ccMfgApcmandatory The APC value. This value is the preset manufacturing value	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.11
ccMfgIwmModulationmandatory The frequency modulation for the IWM channel. This value is the preset manufacturing value	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.12
ccMfgRefClockmandatory The value of the reference clock in decimal notation. For a given value, like 1660-EN, the actual value is 16.60-EN. In otherwords, assume a two digit decimal point, plus any appropriate scaling factor. This value is …	Enumeration Enumerated Values: 1 en1660 2 en1944 3 en1953	.1.3.6.1.4.1.4253.1.3.6.1.13
ccMfgClockDivmandatory The clock divisor. Values are 1250, 622 or 155 in the appropriate clock frequency scale.	Enumeration Enumerated Values: 1 dout-1250 2 dout-622 3 dout-155	.1.3.6.1.4.1.4253.1.3.6.1.14
ccBandwidthmandatory The bandwidth of the channel card.	Enumerationr/w Enumerated Values: 1 oc3 2 oc12 3 oc48 4 gbEthernet 5 fibreChannel 6 oc192 9 gbE10 10 fibreChannelX2	.1.3.6.1.4.1.4253.1.3.6.1.15
ccSetStatemandatory Instruct the CC to do a warmboot or loopback. A get on this will always return an other.	Enumerationr/w Enumerated Values: 1 other 2 warmboot 3 enableLoopback 4 disableLoopback	.1.3.6.1.4.1.4253.1.3.6.1.16
connMuxChassismandatory The connected mux chassis.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.17
connMuxShelfmandatory The connected mux shelf.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.3.6.1.18
connMuxSlotmandatory The connected mux slot.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.19
connMuxPortmandatory The connected mux port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.20
connDemuxChassismandatory The connected demux chassis.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.21
connDemuxShelfmandatory The connected demux shelf.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.3.6.1.22
connDemuxSlotmandatory The connected demux slot.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.23
connDemuxPortmandatory The connected demux port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.24
ccModelNummandatory Model number of the CC card. Up to 15 characters	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.25
ccLinkITUNummandatory Link ITU number of the CC card. Up to 15 characters	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.26
ccLinkWavelengthmandatory Link Wavelength of the CC card	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.4253.1.3.6.1.27
ccLaserTypemandatory Laser Type of the Channel Card.	Enumeration Enumerated Values: 1 uncooled 2 cooled	.1.3.6.1.4.1.4253.1.3.6.1.28
ccRecvDiodemandatory Receive Diode of the Channel Card.	Enumeration Enumerated Values: 1 apd 2 pin	.1.3.6.1.4.1.4253.1.3.6.1.29
ccLinkAutoDisablemandatory Flag to enable/disable the CPE link when the threshold value crosses the lower hysteresis limit. The default value is disable. CPE disable with CPE Rx pass through is identical to normal CPE disable with the added feat…	Enumerationr/w Enumerated Values: 1 enable 2 disable 3 enableCpeRxPassThru	.1.3.6.1.4.1.4253.1.3.6.1.30
ccLinkNamemandatory Link name for fiber between the local and the remote cc card.	LinkNamer/w Type Constraints: range: 0..40	.1.3.6.1.4.1.4253.1.3.6.1.31
ccCsimModulemandatory Whether colorSIM module is physically present, not installed or preconfigured.	Enumeration Enumerated Values: 1 installed 2 notinstalled 3 preconfigured	.1.3.6.1.4.1.4253.1.3.6.1.32
ccHWNamemandatory Display Hardware name of the CC Card.	CardName Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.3.6.1.33
ccBackpackModulemandatory Presence of Backpack module, installed or not Installed.	Enumeration Enumerated Values: 1 installed 2 notInstalled	.1.3.6.1.4.1.4253.1.3.6.1.34
ccBackpackRxITUNumbermandatory Rx ITU number of backpack.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.35
ccBackpackTxITUNumbermandatory Tx ITU number of backpack.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.36
ccBackpackRxInsertionLossmandatory Rx Insertion loss of backpack.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.37
ccBackpackTxInsertionLossmandatory Tx Insertion loss of backpack.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.38
ccBackpackRxExpressLossmandatory Rx Express loss of backpack.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.39
ccBackpackTxExpressLossmandatory Tx Express loss of backpack.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.40
ccSwitchByShelfSlotmandatory Initiate manual UPSR switching by shelf and slot.	OctetStringr/w Constraints: range: 0-10	.1.3.6.1.4.1.4253.1.3.6.1.41
ccPathIDmandatory Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left associate with that path.	PathIdNamer/w Type Constraints: range: 0..16	.1.3.6.1.4.1.4253.1.3.6.1.42
ccCpeDisableThresholdmandatory CPE Disable Threshold (Link Rx Power) in dBm. The limit is from -32 to -8, but input should be an absolute value if using mib browser. A value of 0 in this field indicates that UPSR is not supported. This value will…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.43
ccCpeReEnableThresholdmandatory CPE Re-enable threshold (Link Rx Power) in dBm. The limit is from -31 to -7, but input should be an absolute value if using mib browser. A value of 0 in this field indicates that UPSR is not supported. This value wi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.44
connTxNonMuxDmuxCardTypemandatory Type of module connected to Tx port of OCM.	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.3.6.1.45
connTxNonMuxDmuxPortmandatory Conn port for CC's Tx port.Possible values based on card types that can connect to OCM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B Rx OCMU/OCMITU/MCMT1/MCME1/OCM10G/OCM10G:…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.46
connTxNonMuxDmuxShelfmandatory The shelf the card conn to Tx port of OCM. Valid values are: 1 to 10.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.3.6.1.47
connTxNonMuxDmuxSlotmandatory The slot within the shelf the card conn to Tx port of OCM.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.48
connRxNonMuxDmuxCardTypemandatory Type of module connected to Rx port of OCM.	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.3.6.1.49
connRxNonMuxDmuxPortmandatory Conn port for CC's Rx port.Possible values based on card types that can connect to OCM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B Rx OCMU/OCMITU/MCMT1/MCME1/OCM10G/OCM10G:…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.50
connRxNonMuxDmuxShelfmandatory The shelf the card conn to Rx port of OCM. Valid values are: 1 to 10.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.3.6.1.51
connRxNonMuxDmuxSlotmandatory The slot within the shelf the card conn to Rx port of OCM.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.52
ccUpsrModemandatory UPSR mode for CC card: primary or backup. If not in upsr configuration, value is na. This value will not take affect until ccLinkAutoDisable has been enabled.	Enumerationr/w Enumerated Values: 1 primary 2 backup 3 na	.1.3.6.1.4.1.4253.1.3.6.1.53
ccPairShelfmandatory The shelf of other CC card in pair.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.54
ccPairSlotmandatory The slot of other CC card in pair. Input 0 to unpair OCMs and delete RSM connections if any.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.55
ccAdminStatemandatory Administrative control over that cc card. Default value is enable. When disabled, no alarms/events gets generated. For remote CC, the default value is disabled	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 na	.1.3.6.1.4.1.4253.1.3.6.1.56
ccRegenPairShelfmandatory The shelf of other CC card in OCM regeneration pair. This value will not take affect until ccLinkAutoDisable has been enabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.57
ccRegenPairSlotmandatory The slot of other CC card in OCM regeneration pair. Input 0 to unpair OCMs involved. This value will not take affect until ccLinkAutoDisable has been enabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.58
ccCleiNummandatory CLEI number of the CC Card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.3.6.1.59
connCpeTxMcmescShelfmandatory The connected MCMESC shelf.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.3.6.1.60
connCpeTxMcmescSlotmandatory The connected MCMESC slot.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.61
connCpeTxMcmescPortmandatory The connected MCMESC port. 1=Link Tx, 2=Link Rx.	Enumeration Enumerated Values: 1 linktx 2 linkrx	.1.3.6.1.4.1.4253.1.3.6.1.62
connCpeRxMcmescShelfmandatory The connected MCMESC shelf.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.3.6.1.63
connCpeRxMcmescSlotmandatory The connected MCMESC slot.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.3.6.1.64
connCpeRxMcmescPortmandatory The connected MCMESC port. 1=Link Tx, 2=Link Rx.	Enumeration Enumerated Values: 1 linktx 2 linkrx	.1.3.6.1.4.1.4253.1.3.6.1.65
ccNumPortsmandatory Total port numbers on each CC card.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.3.6.1.66

This table represents the number of sub divisions
and the size of each subdivision in ROM memory

muxSubDivEntry row .1.3.6.1.4.1.4253.1.4.4.1

Specifies the index for each row in the table below

Indexes

muxSubDivIndex

Column	Syntax	OID
muxSubDivIndexmandatory Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM.	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.4.4.1.1
muxSubDivDescrmandatory Display Name of each Sub Division in ROM	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.4.4.1.2
muxSubDivSizemandatory Size of each sub division in ROM in kilobytes	Integer32 Constraints: range: 0-1024	.1.3.6.1.4.1.4253.1.4.4.1.3
muxSubDivOffsetmandatory Starting address of each sub division in the ROM in HEX notation.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.4253.1.4.4.1.4

This table represents the information for each
MUX card

muxEntry row .1.3.6.1.4.1.4253.1.4.6.1

Specifies the index for each row in the table below

Indexes

muxCardLocation muxCardShelf muxCardSlot

Column	Syntax	OID
muxCardLocationmandatory Location of the module. Valid values are: Local in the same chassis, or remote to this chassis	CardLocation Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.4.6.1.1
muxCardShelfmandatory The shelf the card is in.	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.4.6.1.2
muxCardSlotmandatory The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To delete this card, set this variable to 0.	SlotInputr/w Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.4.6.1.3
muxModelNummandatory Model number for module.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.4.6.1.4
muxMfgDatemandatory Date and Time of manufacturing of the module	DateAndTime Type Constraints: range: 0..20	.1.3.6.1.4.1.4253.1.4.6.1.5
muxSerialNummandatory Serial # of the module.	SerialString Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.4.6.1.6
muxModelTypemandatory Model type of the module	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.4.6.1.7
muxNamemandatory User configurable name of the module	CardNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.4.6.1.8
muxFWVersionIDmandatory The current version string of the FW code	VersionString Type Constraints: range: 0..12	.1.3.6.1.4.1.4253.1.4.6.1.9
muxSetStatemandatory Instruct the mux to do a warmboot. A get on this will always return an other.	RebootTyper/w Type Values: 1 other 2 warmboot	.1.3.6.1.4.1.4253.1.4.6.1.10
muxNumPortsmandatory Total port numbers on each MUX card. Should be six	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.6.1.11
muxUpgradeFlagmandatory The MUX card's status is upgradable or not.	Enumeration Enumerated Values: 1 upgradable 2 notUpgradable	.1.3.6.1.4.1.4253.1.4.6.1.12
muxHWNamemandatory Display Hardware name of the mux/dmux Card.	CardName Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.4.6.1.13
muxPathIDmandatory Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left associate with that path.	PathIdNamer/w Type Constraints: range: 0..16	.1.3.6.1.4.1.4253.1.4.6.1.14
muxAdminStatemandatory Administrative control over that mux card. Default value is enable. When disabled, no alarms/events gets generated.	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 na	.1.3.6.1.4.1.4253.1.4.6.1.15
muxCleiNummandatory CLEI number of the mux/dmux Card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.4.6.1.16
muxChannelSpacingmandatory ITU channel spacing for the mux/demux card. Only valid for MD100-40 and BD4 Modules.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.6.1.17
muxStartItumandatory First ITU channel supported by the module. Only valid for MD100-40 and BD4 Modules.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.6.1.18
muxEndItumandatory Last ITU channel supported by the module. Only valid for MD100-40 and BD4 Modules.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.6.1.19
muxChannelsPerBandmandatory Number of channels per optical band supported by the module. Only valid for BD-4 and MD100-40 module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.6.1.20
muxBandsmandatory Number of bands supported by the module. Only valid for BD-4 and MD100-40 module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.6.1.21

This table represents the information for each
MUX card's port.

muxPortEntry row .1.3.6.1.4.1.4253.1.4.8.1

Specifies the index for each row in the table below

Indexes

muxPortCardLocation muxPortCardShelf muxPortCardSlot muxPortIndex

Column	Syntax	OID
muxPortCardLocationmandatory Location of the MUX's port. Valid values are: Local in the same chassis, or remote to this chassis	CardLocation Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.4.8.1.1
muxPortCardShelfmandatory The shelf the card is in. Valid values are: 1 to 2.	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.4.8.1.2
muxPortCardSlotmandatory The slot within the shelf the card is in.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.4.8.1.3
muxPortIndexmandatory Port's index. Ports 1 through 4 can be use for connection with OCM family or MCMT1/MCME1 only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.8.1.4
muxWavelengthmandatory Port's wavelength: either ITU number or actual wavelength in nm. Supported by all Mux modules except MD100-40 & BD4.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.8.1.5
muxInsertLossmandatory Mux Port insertion Loss range. Supported by all Mux modules except MD100-40 & BD4.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.4.8.1.6
muxConnCardTypemandatory Module type connected to mux port. Supported by all Mux modules except MD100-40 & BD4.	CardTyper/w Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.4.8.1.7
muxConnLocationmandatory The chassis's location of the card conn to. Supported by all Mux modules except MD100-40 & BD4.	CardLocationr/w Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.4.8.1.8
muxConnShelfmandatory The shelf the card conn to. Valid values are: 1 to 2. Supported by all Mux modules except MD100-40 & BD4.	ShelfInputr/w Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.4.8.1.9
muxConnSlotmandatory The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0. Supported by all Mux modules except MD100-40 & BD4.	SlotInputr/w Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.4.8.1.10
muxConnPortmandatory Conn port for MUX/DMUX's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B Rx OCM10G/OCME/OCMITU/OCMU/MCMT1/MCM…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.4.8.1.11
muxPortTypemandatory Type of the MUX's port. Supported by all Mux modules except MD100-40 & BD4.	Enumeration Enumerated Values: 1 mux 2 demux	.1.3.6.1.4.1.4253.1.4.8.1.12
muxConnChassisIDmandatory Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the local node. Supported by all Mux modules except MD100-40 &…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.4253.1.4.8.1.13
muxConnSystemNamemandatory System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of the local node. Supported by all Mux modules except MD100-40…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4253.1.4.8.1.14
muxConnIpAddressmandatory IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the node. Supported by all Mux modules except MD100-40 & BD4.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4253.1.4.8.1.15
muxPortAvgInsertionLossmandatory Average port insertion loss for the port category. Valid only for MD100-40 & BD4 modules.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.4.8.1.16
muxPortMaxInsertionLossmandatory Maximum port insertion loss for the port category. Valid only for MD100-40 & BD4 modules.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.4.8.1.17
muxPortTapRatiomandatory Tap ratio for the port category. Valid only for MD100-40 & BD4 modules.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.4.8.1.18

This table represents the information for each
PS module.

psEntry row .1.3.6.1.4.1.4253.1.5.2.1

Specifies the index for each row in the table below

Indexes

psID

Column	Syntax	OID
psIDmandatory The module ID the ps module is in. Valid values are: 1 to 4	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.4253.1.5.2.1.1
psModemandatory Mode of the PS module. Valid values are: active or standby	RedundancyMode Type Values: 1 active 2 standby	.1.3.6.1.4.1.4253.1.5.2.1.2
psMfgDatemandatory Date and Time of manufacturing of the PS module.	DateAndTime Type Constraints: range: 0..20	.1.3.6.1.4.1.4253.1.5.2.1.3
psSerialNummandatory Serial # of the PS module. Not Supported Yet.	SerialString Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.5.2.1.4
psModelTypemandatory Model type of the PS module. Up to 10 characters. Not Supported Yet.	ModelString Type Constraints: range: 0..10	.1.3.6.1.4.1.4253.1.5.2.1.5

This table represents the information for each
FTP server

dlFtpEntry row .1.3.6.1.4.1.4253.1.6.1.1

Specifies the index for each row in the table below

Indexes

dlFtpIp

Column	Syntax	OID
dlFtpIpmandatory The IP address of the FTP server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4253.1.6.1.1.1
dlFtpLogonIDmandatory The FTP user ID for this FTP server. Up to 15 chars.	LogonIDr/w Type Constraints: range: 0..15	.1.3.6.1.4.1.4253.1.6.1.1.2
dlFtpPasswdmandatory Password for the above FTP Logon ID. This password is NOT hashed. Proper security access is required to set and view this element. Most FTP connections, however, are using anonymous logon ID with no special password …	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.6.1.1.3
dlFtpModemandatory FTP server modes. The choices are: active or passive, active may be necessary for users behind a firewall.	FtpModer/w Type Values: 1 active 2 passive	.1.3.6.1.4.1.4253.1.6.1.1.4
dlFtpPortmandatory FTP port. This port is used in conjunction with the FTP IP address for establishing a connection to the FTP server. Any valid IP port may be entered. Setting this element to zero (0) will cause the standard FTP port …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.4253.1.6.1.1.5

This table represents the information for each
PreQual table.

dlPreQualEntry row .1.3.6.1.4.1.4253.1.6.2.1

Specifies the index for each row in the table below

Indexes

dlPreQualTypeVersion

Column	Syntax	OID
dlPreQualTypeVersionmandatory The Image type and version to be prequalified before downloading. The string format is : type,version. The prequal action will be taken after setting version.	OctetStringr/w Constraints: range: 0-42	.1.3.6.1.4.1.4253.1.6.2.1.1
dlPreQualResultmandatory The result after comparing type and version of the selected download image with the compatibility matrix. The result is either compatible, incompatible or unknown version. (Not available at this time). The default…	Enumeration Enumerated Values: 1 compatible 2 incompatible 3 unknown-version	.1.3.6.1.4.1.4253.1.6.2.1.2

This table represents the information for 
download and activation.

dlDownloadEntry row .1.3.6.1.4.1.4253.1.6.3.1

Specifies the index for each row in the table below

Indexes

dlType dlLocation dlShelf dlSlot

Column	Syntax	OID
dlTypemandatory The Image type to be downloaded or to be activated. The valid values are: all, mpms, boot, macf, mcme1, mcmesc_code, mcmt1, mpm, ocm, ocm10g, oet, osam, osam_hp/lp, rsm, upsm, uob. When choosing all, all non-mpm imag…	DownloadTyper/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.6.3.1.1
dlLocationmandatory The location to be downloaded or to be activated. The choices are: local, remote or both. (Only local and remote are supported at this time, LuxnOS has only local choice and is not supported yet. When dlType is se…	DownloadLocationr/w Type Values: 1 local 2 remote 3 remote2	.1.3.6.1.4.1.4253.1.6.3.1.2
dlShelfmandatory The destination shelf. When dlType is set to all, dlShelf should be set to 0.	DownloadShelfr/w Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.6.3.1.3
dlSlotmandatory The slot within the selected shelf. When dlType is set to all, dlSlot should be set to 0.	DownloadSlotr/w Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.6.3.1.4
dlFilenamemandatory The filename and path of the file to be downloaded -up to 255 characters. When dlType is set to all, the dlFilename field should be set to the path of the directory where the non-mpm images are stored. When dlType is …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4253.1.6.3.1.5
dlActivatemandatory Activate the backup image at the selected location. To MCMESC, no, activateBackupFirmware, activateBackupFPGA and activateBackupFirmwareAndFPGA are applicable. To MCMT1/MCME1, no and activateBackupFirmwareAndFPGA are a…	Enumerationr/w Enumerated Values: 1 no 2 activateBackupFirmware 3 activateBackupFPGA 4 activateBackupFirmwareAndFPGA 5 activateForAllLineCards	.1.3.6.1.4.1.4253.1.6.3.1.6
dlExportTypemandatory The image indicated by dlType is to be exported to the dlFilename using FTP. Ths element is reset to none(1) after each export.	Enumerationr/w Enumerated Values: 1 import 2 export	.1.3.6.1.4.1.4253.1.6.3.1.7

This table represents the information for 
LuxnOS table.

dlOSEntry row .1.3.6.1.4.1.4253.1.6.4.1

Specifies the index for each row in the table below

Indexes

dlOSIndex

Column	Syntax	OID
dlOSIndexmandatory The Integer ID for each LuxnOS.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.4253.1.6.4.1.1
dlOSVersionmandatory Display the LuxnOS version.	VersionString Type Constraints: range: 0..12	.1.3.6.1.4.1.4253.1.6.4.1.2
dlOSStatemandatory Display the LuxnOS state: operating(1) is the current operating LuxnOS, backup(2)is the backup LuxnOS.	OSState Type Values: 1 operating 2 backup	.1.3.6.1.4.1.4253.1.6.4.1.3
dlOSRelDatemandatory Display the release date of the LuxnOS.	ReleaseDate Type Constraints: range: 0..10	.1.3.6.1.4.1.4253.1.6.4.1.4

This table represents the number of sub divisions
and the size of each subdivision in ROM memory

fadmSubDivEntry row .1.3.6.1.4.1.4253.1.7.4.1

Specifies the index for each row in the table below

Indexes

fadmSubDivIndex

Column	Syntax	OID
fadmSubDivIndexmandatory Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.4253.1.7.4.1.1
fadmSubDivDescrmandatory Display Name of each Sub Division in ROM	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.7.4.1.2
fadmSubDivSizemandatory Size of each sub division in ROM in kilobytes	Integer32 Constraints: range: 1-1024	.1.3.6.1.4.1.4253.1.7.4.1.3
fadmSubDivOffsetmandatory Starting address of each sub division in the ROM in HEX notation.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.4253.1.7.4.1.4

This table represents the information for each
OADM module

fadmEntry row .1.3.6.1.4.1.4253.1.7.6.1

Specifies the index for each row in the table below

Indexes

fadmCardLocation fadmCardShelf fadmCardSlot

Column	Syntax	OID
fadmCardLocationmandatory Location of the FADM Module.	CardLocation Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.7.6.1.1
fadmCardShelfmandatory The shelf of the Module is in. Valid values are: 1, 2 or 3 depending on the chassis type.	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.7.6.1.2
fadmCardSlotmandatory The slot within the shelf the module is in. The range of valid values range from 1 through 21 depending on the chassis type and the shelf the module is in. To delete this card, set this variable to 0.	SlotInputr/w Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.7.6.1.3
fadmMfgDatemandatory Date and Time of manufacturing of the FADM card	DateAndTime Type Constraints: range: 0..20	.1.3.6.1.4.1.4253.1.7.6.1.4
fadmSerialNummandatory Serial # of the FADM card.	SerialString Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.7.6.1.5
fadmModelTypemandatory Model type of the FADM	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.7.6.1.6
fadmNamemandatory Display (Network) name of the FADM Card	CardNamer/w Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.7.6.1.7
fadmFWVersionIDmandatory The current version string of the FADM FW code	VersionString Type Constraints: range: 0..12	.1.3.6.1.4.1.4253.1.7.6.1.8
fadmSetStatemandatory Instruct the fadm to do a warmboot. A get on this will always return an other.	RebootTyper/w Type Values: 1 other 2 warmboot	.1.3.6.1.4.1.4253.1.7.6.1.9
fadmNumPortsmandatory Total port numbers of FADM module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.6.1.10
fadmUpgradeFlagmandatory The FADM module's status is upgradeable or not.	Enumeration Enumerated Values: 1 upgradeable 2 notUpgradeable	.1.3.6.1.4.1.4253.1.7.6.1.11
fadmModelNummandatory Model # of the FADM card. Up to 15 characters	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.7.6.1.12
fadmITUNumber1mandatory Port 1's ITU wavelength.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.6.1.13
fadmITUNumber2mandatory	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.6.1.14
fadmInsertionLoss1mandatory Port 1's insertion loss in dB.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.7.6.1.15
fadmInsertionLoss2mandatory	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.7.6.1.16
fadmExpressLossmandatory Internal express port's insertion loss in dB.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.7.6.1.17
fadmHWNamemandatory Display Hardware name of the FADM Card.	CardName Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.7.6.1.18
fadmPathIDmandatory Upsr Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left associate with that path.	PathIdNamer/w Type Constraints: range: 0..16	.1.3.6.1.4.1.4253.1.7.6.1.19
fadmAdminStatemandatory Administrative control over that fadm card. Default value is enable. When disabled, no alarms/events gets generated.	Enumerationr/w Enumerated Values: 1 disable 2 enable 3 na	.1.3.6.1.4.1.4253.1.7.6.1.20
fadmCleiNummandatory CLEI number of the fadm Card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.7.6.1.21
fadmBandmandatory Optical band supported by the module. Valid only for BP-5 and BP-10 modules.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.7.6.1.22
fadmChannelsPerBandmandatory Number of channels per optical band supported by the module. Only valid for BP-5 and BP-10module.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.6.1.23
fadmStartItumandatory First ITU channel supported by the module. Valid only for BP-5 and BP-10 modules.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.6.1.24
fadmEndItumandatory Last ITU channel supported by the module. Valid only for BP-5 and BP-10 modules.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.6.1.25

This table represents the physical connection for each
FADM card's port.

fadmPortEntry row .1.3.6.1.4.1.4253.1.7.7.1

Specifies the index for each row in the table below

Indexes

fadmPortCardShelf fadmPortCardSlot fadmPortType

Column	Syntax	OID
fadmPortCardShelfmandatory The shelf the card is in. Valid values are: 1 to 2.	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.7.7.1.1
fadmPortCardSlotmandatory The slot within the shelf the card is in.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.7.7.1.2
fadmPortTypemandatory Type of the FADM port. The order is CLI compatible. For FADM model type, the ports are listed on the left column	Enumeration Enumerated Values: 1 connATx-AToD 2 connARx-EXP 3 localTx-Local 4 localRx-Rx 5 connBTx 6 connBRx	.1.3.6.1.4.1.4253.1.7.7.1.3
fadmConnLocationmandatory The chassis's location of the card conn to.	CardLocationr/w Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.7.7.1.4
fadmConnIpAddressmandatory IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the node	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4253.1.7.7.1.5
fadmConnChassisIDmandatory Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the local node	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.4253.1.7.7.1.6
fadmConnSystemNamemandatory System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of the local node.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4253.1.7.7.1.7
fadmConnCardTypemandatory Module type connected to fadm port.	CardTyper/w Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.7.7.1.8
fadmConnPortmandatory Conn port for FADM's port. Possible values based on card types that can be connected to are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B Rx OCM10G/OCME/OCMITU/OCMU/MCMT1/MCME1: …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.7.7.1.9
fadmConnShelfmandatory The shelf the card conn to. Valid values are: 1 to 2.	ShelfInputr/w Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.7.7.1.10
fadmConnSlotmandatory The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0.	SlotInputr/w Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.7.7.1.11

This table represents the number of sub divisions
and the size of each subdivision in ROM memory

oppmSubDivEntry row .1.3.6.1.4.1.4253.1.8.4.1

Specifies the index for each row in the table below

Indexes

oppmSubDivIndex

Column	Syntax	OID
oppmSubDivIndexmandatory Integer ID of each sub division in the ROM. The order of numbering is from the top of the ROM to the bottom of the ROM.	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.8.4.1.1
oppmSubDivDescrmandatory Display Name of each Sub Division in ROM	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.4253.1.8.4.1.2
oppmSubDivSizemandatory Size of each sub division in ROM in kilobytes	Integer32 Constraints: range: 0-1024	.1.3.6.1.4.1.4253.1.8.4.1.3
oppmSubDivOffsetmandatory Starting address of each sub division in the ROM in HEX notation.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.4253.1.8.4.1.4

This table represents the information for each
OPPM card

oppmEntry row .1.3.6.1.4.1.4253.1.8.6.1

Specifies the index for each row in the table below

Indexes

oppmCardLocation oppmCardShelf oppmCardSlot

Column	Syntax	OID
oppmCardLocationmandatory Location of the OPPM card. Valid values are: Local in the same chassis, or remote to this chassis	CardLocation Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.8.6.1.1
oppmCardShelfmandatory The shelf the card is in. Valid values are: 1 to 2	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.8.6.1.2
oppmCardSlotmandatory The slot within the shelf the module is in. The range of valid values range from 1 through 17 depending on the chassis type and the shelf the module is in. To delete this card, set this variable to 0.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.8.6.1.3
oppmModelNummandatory Oppm's model number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.8.6.1.4
oppmMfgDatemandatory Date and Time of manufacturing of the OPPM card	DateAndTime Type Constraints: range: 0..20	.1.3.6.1.4.1.4253.1.8.6.1.5
oppmSerialNummandatory Serial # of the OPPM card.	SerialString Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.8.6.1.6
oppmModelTypemandatory Model type of the OPPM	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.8.6.1.7
oppmNamemandatory Display (Network) name of the OPPM Card	CardName Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.8.6.1.8
oppmFWVersionIDmandatory The current version string of the OPPM FW code	VersionString Type Constraints: range: 0..12	.1.3.6.1.4.1.4253.1.8.6.1.9
oppmSetStatemandatory Instruct the oppm to do a warmboot. A get on this will always return an other.	RebootType Type Values: 1 other 2 warmboot	.1.3.6.1.4.1.4253.1.8.6.1.10
oppmTxInsertLossmandatory Transmit insertion loss.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.8.6.1.12
oppmRxInsertLossmandatory Receive insertion loss.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.8.6.1.13
oppmUpgradeFlagmandatory The oppm card's status is upgradable or not.	Enumeration Enumerated Values: 1 upgradable 2 notUpgradable	.1.3.6.1.4.1.4253.1.8.6.1.14
oppmSwitchmandatory instruct the OPPM to take on an action, such as: switch to link A or link B A get would alway return other(1).	Enumeration Enumerated Values: 1 other 2 switchToLinkA 3 switchToLinkB 4 toggle 6 enableAutoSwitch	.1.3.6.1.4.1.4253.1.8.6.1.15
oppmMarginForSwitchmandatory Configurable switching margin in dB for protection switch to occur.	Integer32 Constraints: range: 5-15	.1.3.6.1.4.1.4253.1.8.6.1.16
oppmHighAlarmMarginmandatory High alarm margin for input signal strength displayed in dB unit	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.8.6.1.17
oppmConfigCommitmandatory This allows the current module configuration, such as oppmMarginForSwitch, to be stored in permanent storage.	Enumeration Enumerated Values: 1 other 2 save	.1.3.6.1.4.1.4253.1.8.6.1.18
oppmHWNamemandatory Display Hardware name of the OPPM Card.	CardName Type Constraints: range: 0..32	.1.3.6.1.4.1.4253.1.8.6.1.19
oppmLinkAPathIDmandatory Oppmm LinkA Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left associate with that path.	PathIdName Type Constraints: range: 0..16	.1.3.6.1.4.1.4253.1.8.6.1.20
oppmLinkBPathIDmandatory Oppm LinkB Path ID name that this card is associated with. Set input equal NULL will remove the card off the path and also remove the path if there is no card left associate with that path.	PathIdName Type Constraints: range: 0..16	.1.3.6.1.4.1.4253.1.8.6.1.21
oppmAdminStatemandatory Administrative control over that oppm card. Default value is enable. When disabled, no alarms/events gets generated.	Enumeration Enumerated Values: 1 disable 2 enable 3 na	.1.3.6.1.4.1.4253.1.8.6.1.22
oppmCleiNummandatory CLEI number of the oppm Card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.4253.1.8.6.1.23
oppmSwitchStatemandatory The switching state. Switching state may be either auto or forced. The auto state means automatic switching is enabled. Forced state means swithcing is disabled and has been forced to the current active link.	Enumeration Enumerated Values: 1 auto 2 forced	.1.3.6.1.4.1.4253.1.8.6.1.24

This table represents the physical connection for each
OPPM card's port.

oppmPortEntry row .1.3.6.1.4.1.4253.1.8.7.1

Specifies the index for each row in the table below

Indexes

oppmPortCardShelf oppmPortCardSlot oppmPortType

Column	Syntax	OID
oppmPortCardShelfmandatory The shelf the card is in. Valid values are: 1 to 2.	CardShelf Type Constraints: range: 1..2	.1.3.6.1.4.1.4253.1.8.7.1.1
oppmPortCardSlotmandatory The slot within the shelf the card is in.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.8.7.1.2
oppmPortTypemandatory Type of the OPPM's port.	Enumerationr/w Enumerated Values: 1 linkATx 2 linkARx 3 linkBTx 4 linkBRx 5 localTx 6 localRx	.1.3.6.1.4.1.4253.1.8.7.1.3
oppmConnLocationmandatory The chassis's location of the card conn to.	CardLocation Type Values: 1 local 2 remote1 3 remote2	.1.3.6.1.4.1.4253.1.8.7.1.4
oppmConnIpAddressmandatory IpAddress of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the IP address of the node	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4253.1.8.7.1.5
oppmConnChassisIDmandatory Chassis ID of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the chassis Id of the local node	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.4253.1.8.7.1.6
oppmConnSystemNamemandatory System Name of the connected node. User config. If local connection, a set on it would return an error; would be automatically be set to the sysetem name of the local node.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.4253.1.8.7.1.7
oppmConnCardTypemandatory Module type connected to oppm port.	CardType Type Values: 0 empty 1 mpm 2 ocmu 3 ocmi 4 ofcm 5 ofcd 6 fadm 7 oppm 8 mcmt1 9 oli 10 w4cd 13 w2cmd 20 osam 21 w4cm 22 rsm 23 upsm 24 ocme 25 oci 26 oxc 27 ocm10g 29 osamlp 30 osamhp 33 mcmesc 34 wfadm 35 mcme1 36 md100-1 37 md100-40 38 tap 39 md100-5 40 md100-10 41 ocm10glr 42 bd-4 43 bp-10 44 unknown 45 dmm 46 bp-5 47 mpm2 48 osc 49 ocm2 50 ocm10gf 51 ocm2-4g 52 oet 53 uob 54 fc8g 55 md100p 56 cwdm_bd4	.1.3.6.1.4.1.4253.1.8.7.1.8
oppmConnPortmandatory Conn port for OPPM's port. Possible values based on card types that can connect to OPPM are: FADM: 1=Conn A Tx, 2=Conn A Rx, 3=Local Tx 4=Local Rx, 5=Conn B Tx, 6=Conn B Rx OCM10G/OCME/OCMITU/OCMU/MCMT1/MCME1: …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4253.1.8.7.1.9
oppmConnShelfmandatory The shelf the card conn to. Valid values are: 1 to 2.	ShelfInput Type Constraints: range: 0..2	.1.3.6.1.4.1.4253.1.8.7.1.10
oppmConnSlotmandatory The slot within the shelf the card conn to. To delete a connection associated with a specified port, set this variable to 0.	SlotInput Type Constraints: range: 0..17	.1.3.6.1.4.1.4253.1.8.7.1.11