CPQIDA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
384

cpqDaNw3xDriverStatTable

table obsolete
.1.3.6.1.4.1.232.3.2.1.1.5 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaNw3xDriverStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaNw3xDriverStatTable' 
Array Controller Driver Statistics Table.
          
This is a table of logical drive statistics which are gathered
by the device driver.
cpqDaNw3xDriverStatEntry row .1.3.6.1.4.1.232.3.2.1.1.5.1
Array Controller Driver Statistics Table Entry.

One entry in the driver statistics table. Each entry
represents a logical drive for which the statistics are kept.
Indexes
Column Syntax OID
cpqDaNw3xCntlrIndexobsolete
Array Controller Index.

This maps the logical drives into their respective controllers.
This controller index matches the controller group entries.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.1.5.1.1
cpqDaNw3xLogDrvIndexobsolete
Array Logical Drive Index.

This is the logical drive number which keeps track of multiple
instances of logical drives which are on the same controller.
For each controller index value, the logical drive i…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.1.5.1.2
cpqDaNw3xTotalReadsobsolete
Array Logical Drive Total Reads.

This shows the total number of reads performed by the IDA device
driver to this logical drive. This number is reset each time the
device driver is loaded for this logical…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.1.1.5.1.3
cpqDaNw3xTotalWritesobsolete
Array Logical Drive Total Writes.

This shows the total number of writes performed by the IDA device
driver to this logical drive. This number is reset each time the
device driver is loaded for this logic…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.1.1.5.1.4
cpqDaNw3xCorrReadsobsolete
Array Logical Drive Corrected Reads.

This is the total number of read commands sent to the specified
logical drive which had to be corrected by fault tolerance. This
number is reset each time the device …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.1.1.5.1.5
cpqDaNw3xCorrWritesobsolete
Array Logical Drive Corrected Writes.

This is the total number of write commands sent to the specified
logical drive which had to be corrected by fault tolerance. This
number is reset each time the devic…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.1.1.5.1.6
cpqDaNw3xFatalReadsobsolete
Array Logical Drive Fatal Reads.

This is the total number of read commands sent to the specified
logical drive which failed. This number is reset each time the
device driver is loaded for this logical dr…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.1.1.5.1.7
cpqDaNw3xFatalWritesobsolete
Array Logical Drive Fatal Writes.

This is the total number of write commands sent to the specified
logical drive which failed. This number is reset each time the
device driver is loaded for this logical …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.1.1.5.1.8

cpqDaNw3xVolMapTable

table obsolete
.1.3.6.1.4.1.232.3.2.1.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaNw3xVolMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaNw3xVolMapTable' 
Volume Map Table.
          
This is a table of NetWare volumes which map into the
logical drives
cpqDaNw3xVolMapEntry row .1.3.6.1.4.1.232.3.2.1.1.6.1
Volume Map Table Entry.

One entry in the volume map table. Each entry represents
a logical drive for which the volume map is kept.
Indexes
Column Syntax OID
cpqDaNw3xVolCntlrIndexobsolete
Array Controller Index.

This maps the logical drives into their respective controllers.
This controller index matches the controller group entries.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.1.6.1.1
cpqDaNw3xVolLogDrvIndexobsolete
Array Logical Drive Index.

This is the logical drive number which keeps track of multiple
instances of logical drives which are on the same controller.
For each controller index value, the logical drive i…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.1.6.1.2
cpqDaNw3xVolMapobsolete
NetWare Volume Map.

This is a data structure containing the volume mappings for this
logical drive. There are 8 entries in a volume mapping. Each
entry has the following format. An entry can be null indic…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.1.6.1.3

cpqDaOsCommonModuleTable

table obsolete
.1.3.6.1.4.1.232.3.2.1.4.2 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaOsCommonModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaOsCommonModuleTable' 
A table of software modules that provide an interface to the
device this MIB describes.
cpqDaOsCommonModuleEntry row .1.3.6.1.4.1.232.3.2.1.4.2.1
A description of a software module that provides an interface
to the device this MIB describes.
Indexes
Column Syntax OID
cpqDaOsCommonModuleIndexobsolete
A unique index for this module description.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.4.2.1.1
cpqDaOsCommonModuleNameobsolete
The module name.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.4.2.1.2
cpqDaOsCommonModuleVersionobsolete
The module version in XX.YY format.

Where XX is the major version number and YY is the minor version
number. This field will be a null (size 0) string if the agent
cannot provide the module version.
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.232.3.2.1.4.2.1.3
cpqDaOsCommonModuleDateobsolete
The module date.

field octets contents range
===== ====== ======= =====
1 1-2 year 0..65536
2 3 month 1..…
OctetString
Constraints:
range: 7-7
 .1.3.6.1.4.1.232.3.2.1.4.2.1.4
cpqDaOsCommonModulePurposeobsolete
The purpose of the module described in this entry.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.1.4.2.1.5

cpqDaCntlrTable

table mandatory
.1.3.6.1.4.1.232.3.2.2.1 · 1 row entry · 43 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaCntlrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaCntlrTable' 
Array Controller Table.
cpqDaCntlrEntry row .1.3.6.1.4.1.232.3.2.2.1.1
Array Controller Entry.
Indexes
Column Syntax OID
cpqDaCntlrIndexmandatory
Array Controller Index.

This value is a logical number whose meaning is OS dependent.
Each physical controller has one unique controller number
associated with it.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.1
cpqDaCntlrModelmandatory
Array Controller Model.

The type of controller card. The valid types are:

Other (1)
You may need to upgrade your driver software and\or instrument
agent(s). You have a drive array co…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.2
cpqDaCntlrFWRevmandatory
Array Controller Firmware Revision.

The firmware revision of the drive array controller. This
value can be used to help identify a particular revision
of the controller. For B-Series controllers this valu…
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.232.3.2.2.1.1.3
cpqDaCntlrStndIntrmandatory
The status of the Standard Interface.

The Standard Interface is how DOS communicates with a drive.
The following values are valid for Standard Interface:

Other (1)
The device driver may n…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.4
cpqDaCntlrSlotmandatory
Array Controller Slot.

This identifies the physical slot where the array controller
resides in the system. For example, if this value is three,
the array controller is located in slot three of your compu…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.2.1.1.5
cpqDaCntlrConditionmandatory
The condition of the device. This value represents the overall
condition of this controller, and any associated logical drives,
physical drives, and cache modules.
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.6
cpqDaCntlrProductRevmandatory
Array Controller Product Revision.

The Product Revision of the drive array controller. This value
can be used to further identify a particular revision of the
controller model. This will be one characte…
OctetString
Constraints:
range: 0-1
 .1.3.6.1.4.1.232.3.2.2.1.1.7
cpqDaCntlrPartnerSlotmandatory
Array Controller Partner Slot.

For duplexed array controllers, this is the slot number of the
partner controller. For non-duplexed controllers and partner
controllers that reside in a separate host syst…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.8
cpqDaCntlrCurrentRolemandatory
Array Controller Current Role.

For duplexed array controllers, this is the controllers current
role. The following values are valid:

other (1)
Indicates that the instrument agent does no…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.9
cpqDaCntlrBoardStatusmandatory
Array Controller Board Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
status of the controller. You may need to upgrade th…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.10
cpqDaCntlrPartnerBoardStatusmandatory
Array Controller Partner Board Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
status of the controller. You may need to up…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.11
cpqDaCntlrBoardConditionmandatory
The condition of the device. This value represents the
condition of the controller and any associated cache
modules.
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.12
cpqDaCntlrPartnerBoardConditionmandatory
The condition of the device. This value represents the
condition of the controller and any associated cache
modules.
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.13
cpqDaCntlrDriveOwnershipmandatory
Array Controller Drive Ownership.

For duplexed controllers, indicates to which controller slot
the shared devices are associated.

The following values are valid:

other (1)
…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.14
cpqDaCntlrSerialNumbermandatory
Array Controller Serial Number.

The serial number of the array controller. This field will
be a null (size 0) string if the controller does not support
serial number.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.232.3.2.2.1.1.15
cpqDaCntlrRedundancyTypemandatory
Array Controller Redundancy Type.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
redundancy type of the controller. You may need t…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.16
cpqDaCntlrRedundancyErrormandatory
Array Controller Redundancy Error.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
redundancy error of the controller. You may need…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.17
cpqDaCntlrAccessModuleStatusmandatory
Array Controller RAID ADG Enabler Module Status.

The following values are valid:

other (1)
Indicates that the agent does not recognize the RAID ADG
Enabler Module status. You may need …
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.18
cpqDaCntlrDaughterBoardTypemandatory
Array Controller Daughter Board Type.

The following values are valid:

other (1)
Indicates that the agent does not recognize the daughter
board type. You may need to upgrade the agent.
…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.19
cpqDaCntlrHwLocationmandatory
A text description of the hardware location of the controller.
A NULL string indicates that the hardware location could not
be determined or is irrelevant.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.2.1.1.20
cpqDaCntlrNumberOfBusesmandatory
Array Controller Number of Buses.

This value is the number of SCSI buses on the controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.21
cpqDaCntlrBlinkTimemandatory
Controller Physical Drive Blink Time Count.

The controller blink time variable allows the drive tray LEDs
of all physical drives attached to this controller to blink.
This value indicates the amount of ti…
RFC1155-SMICounterr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.2.1.1.22
cpqDaCntlrRebuildPrioritymandatory
Array Controller Rebuild Priority.

This is the controller`s rebuild priority. The following values
are valid:

other (1)
Indicates that the instrument agent does not recognize the
rebui…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.23
cpqDaCntlrExpandPrioritymandatory
Array Controller Expand Priority.

This is the controller`s expand priority. The following values
are valid:

other (1)
Indicates that the instrument agent does not recognize the
expand …
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.24
cpqDaCntlrNumberOfInternalPortsmandatory
Array Controller Number of Internal Ports.

This value is the number of internal connectors on the
controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.25
cpqDaCntlrNumberOfExternalPortsmandatory
Array Controller Number of External Ports.

This value is the number of external connectors on the
controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.26
cpqDaCntlrDriveWriteCacheStatemandatory
Array Controller Drive Write Cache State.

This is the controller`s drive write cache setting. The
following values are valid:

other (1)
Indicates that the instrument agent does not recog…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.27
cpqDaCntlrPartnerSerialNumbermandatory
Array Controller Partner Serial Number.

The serial number of the partner array controller. This field will
be a null (size 0) string if the partner controller does not support
serial number or in the abs…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.232.3.2.2.1.1.28
cpqDaCntlrOptionRomRevmandatory
Array Controller Option ROM Revision.

The option ROM revision of the chipset or HBA being used by the
B-Series controller. If the controller does not support the
option ROM revision, the agents will retu…
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.232.3.2.2.1.1.29
cpqDaCntlrHbaFWRevmandatory
Array Controller HBA Firmware Revision.

The firmware revision of the chipset or HBA being used by the
B-Series controller. If the controller does not support the
HBA firmware revision, the agents will re…
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.232.3.2.2.1.1.30
cpqDaCntlrHBAModeOptionRomRevmandatory
Array Controller HBA Mode Option Rom Revision.

The revision of option ROM that would run on this chipset or HBA (being
used by the B-Series controller), if it were to run in HBA mode. If
the controller do…
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.232.3.2.2.1.1.31
cpqDaCntlrCurrentTempmandatory
Array Controller Current Temperature.

This is the temperature of the array controller in degrees Celsius.
The field will contain -1 if the controller temperature
cannot be calculated or if the controll…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.32
cpqDaCntlrLastLockupCodemandatory
Array Controller Last Lockup Code.

The lockup code of the array controller if a lockup occurred prior
to the last controller reset. This value will be nonzero if the
controller supports last lockup code…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.1.1.33
cpqDaCntlrEncryptionStatusmandatory
Array Controller Encryption Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the instrument ag…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.34
cpqDaCntlrASICEncptSelfTestStatusmandatory
Array Controller ASIC Encryption Self Test Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade th…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.35
cpqDaCntlrEncryptCspNvramStatusmandatory
Array Controller Encryption Critical Security Parameter NVRAM Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.36
cpqDaCntlrEncryptCryptoOfficerPwdSetStatusmandatory
Array Controller Encryption Crypto Officer Password Set Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need …
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.37
cpqDaCntlrEncryptCntlrPwdSetStatusmandatory
Array Controller Encryption Controller Password Set Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need to u…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.38
cpqDaCntlrEncryptCntlrPwdAvailStatusmandatory
Array Controller Encryption Controller Password Availability Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may …
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.39
cpqDaCntlrUnencryptedLogDrvCreationPolicymandatory
Array Controller Unencrypted Logical Drive Creation Policy.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need to u…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.40
cpqDaCntlrEncryptedLogDrvCreationPolicymandatory
Array Controller Encrypted Logical Drive Creation Policy.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upg…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.41
cpqDaCntlrEncryptFWLockStatusmandatory
Array Controller Encryption Firmware Lock Status.

The following values are valid:

other (1)
Indicates that the instrument agent does not recognize the
value. You may need to upgrade the…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.42
cpqDaCntlrOperatingModemandatory
Array Controller Operating Mode.

The array controller`s current operating mode. The
following values are valid:

The following values are valid:

other (1)
Indicates that th…
Enumeration .1.3.6.1.4.1.232.3.2.2.1.1.43

cpqDaAccelTable

table mandatory
.1.3.6.1.4.1.232.3.2.2.2 · 1 row entry · 20 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaAccelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaAccelTable' 
Cache Module Board Table. Note that for some controller models, a 
cache module board that physically attaches to the controller or
chipset may not be an available option. For these configurations, the
Instrument Agent will continue to populate variables that are related 
to read caching operations.
cpqDaAccelEntry row .1.3.6.1.4.1.232.3.2.2.2.1
Cache Module Board Entry.
Indexes
Column Syntax OID
cpqDaAccelCntlrIndexmandatory
Cache Module Board Controller Index.

This value is a logical number whose meaning is OS dependent.
The value has a direct mapping to the controller table index
such that controller `i` has cache module ta…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.1
cpqDaAccelStatusmandatory
Cache Module/Operations Status.

This describes the status of the cache module and/or cache operations.

Note that for some controller models, a cache module board that
physically attaches t…
Enumeration .1.3.6.1.4.1.232.3.2.2.2.1.2
cpqDaAccelMemorymandatory
Write Cache Memory.

This shows the amount of memory allocated for the write cache in
kilobytes. Because data is kept in duplicate (mirrored), the
actual amount of usable memory is half the amount shown.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.3
cpqDaAccelBadDatamandatory
Cache Module Board Bad Data.

The following values are valid:

None (2)
Indicates that no data loss occurred. The battery packs were
properly charged when the system was initialized.
…
Enumeration .1.3.6.1.4.1.232.3.2.2.2.1.4
cpqDaAccelErrCodemandatory
Cache Module Board Error Code.

Use this to determine the status of the write cache operations.

The status can be:

Other (1)
Indicates that the instrument agent does not rec…
Enumeration .1.3.6.1.4.1.232.3.2.2.2.1.5
cpqDaAccelBatterymandatory
Cache Module Board Backup Power Status.

This monitors the status of each backup power source on the board.
The backup power source can only recharge when the system has
power applied. The type of backu…
Enumeration .1.3.6.1.4.1.232.3.2.2.2.1.6
cpqDaAccelReadErrsmandatory
Cache Module Board Read Errors.

This shows the total number of read memory parity errors that
were detected while reading from the Cache Module board.
The mirrored copy of data on the board can be accesse…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.2.2.1.7
cpqDaAccelWriteErrsmandatory
Cache Module Board Write Errors.

This shows the total number of write memory parity errors that
were detected while writing to the Cache Module board.

Write parity errors occur when the sys…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.2.2.1.8
cpqDaAccelConditionmandatory
The condition of the device. This value represents the overall
condition of this cache module.
Enumeration .1.3.6.1.4.1.232.3.2.2.2.1.9
cpqDaAccelReadMemorymandatory
Read Cache Memory.

This shows the amount of memory allocated for the read cache in
kilobytes. Because data is kept in duplicate (mirrored), the
actual amount of usable memory is half the amount shown.
…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.10
cpqDaAccelSerialNumbermandatory
Cache Module Serial Number.

The serial number of the Cache Module. This field will
be a null (size 0) string if the cache module does not support
serial number.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.232.3.2.2.2.1.11
cpqDaAccelTotalMemorymandatory
Total Cache Memory.

This value is the total amount of cache module memory in
kilobytes, including both battery-backed and non-battery-backed
memory.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.12
cpqDaAccelReadCachePercentmandatory
Read Cache Percent.

This shows the percent of cache memory allocated for read ahead
caching. If the data cannot be determined or is not applicable,
the value is set to 4,294,967,295.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.2.2.1.13
cpqDaAccelWriteCachePercentmandatory
Write Cache Percent.

This shows the percent of cache memory allocated for posted
write caching. If the data cannot be determined or is not
applicable, the value is set to 4,294,967,295.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.2.2.1.14
cpqDaAccelFailedBatteriesmandatory
Cache Module Failed Batteries.

This lists the location of cache module failed batteries.
Each octet present contains the position number of a failed
battery. An octet string of length zero indicates that…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.232.3.2.2.2.1.15
cpqDaAccelBackupPowerSourcemandatory
Cache Module Board Backup Power Source.

This describes the backup power source being used by the Cache
Module board.

The status can be:

Other (1)
Indicates that the instrum…
Enumeration .1.3.6.1.4.1.232.3.2.2.2.1.16
cpqDaAccelBoardCurrentTempmandatory
Cache Module Board Current Temperature.

This is the temperature of the cache module board in degrees
Celsius. The field will contain -1 if the cache module
board temperature cannot be calculated or if th…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.17
cpqDaAccelCapacitorCurrentTempmandatory
Cache Module Capacitor Current Temperature.

This is the temperature of the Super-Cap in degrees Celsius.
The field will contain -1 if the Super-Cap temperature
cannot be calculated or if the controller do…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.18
cpqDaAccelMemoryDataWidthmandatory
Cache Memory Data Width.

This is the memory data width (in bits), for the attached cache
module. The field will contain -1 if the memory data width cannot
be calculated or if the controller does not supp…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.19
cpqDaAccelMemoryTransferRatemandatory
Cache Memory Transfer Rate.

This is the memory transfer rate in megatransfers per second (MT/s),
for the attached cache module . The field will contain -1 if the
memory transfer rate cannot be calculate…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.2.1.20

cpqDaManagedCableTable

table mandatory
.1.3.6.1.4.1.232.3.2.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaManagedCableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaManagedCableTable' 
Drive Array Managed Cable Table.
cpqDaManagedCableEntry row .1.3.6.1.4.1.232.3.2.2.3.1
Drive Array Managed Cable Entry.
Indexes
Column Syntax OID
cpqDaManagedCableIndexmandatory
Managed Cable Index.

This index identifies a controller and managed cable association.
This index uniquely identifies a single managed cable connected to a
controller.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.3.1.1
cpqDaManagedCableCntlrIndexmandatory
Managed Cable Controller Index.

This value maps the managed cables into their respective controllers.
This value is a logical number whose meaning is OS dependent. The
value has a direct mapping to the c…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.3.1.2
cpqDaManagedCableHostConnectormandatory
Managed Cable Host Connector.

This is the port connector to which the managed cable is attached.
If the host connector cannot be determined, the agent will return a
NULL string.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.232.3.2.2.3.1.3
cpqDaManagedCableStatusmandatory
Managed Cable Status.

The following values are defined:

Other (1)
Indicates that the instrument agent can not determine the
managed cable status.

Ok (2)
Indicates the c…
Enumeration .1.3.6.1.4.1.232.3.2.2.3.1.4
cpqDaManagedCableFaultCodemandatory
Managed Cable Fault Code.

The following values are defined:

Other (1)
Indicates that the instrument agent can not determine the
managed cable fault code.

None (2)
Indic…
Enumeration .1.3.6.1.4.1.232.3.2.2.3.1.5
cpqDaManagedCableVendorRevisionmandatory
Managed Cable Vendor Revision.

Indicates the vendor revision of the managed cable. If the managed
cable does not support vendor revision, the instrument agent will
return a NULL string.
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.232.3.2.2.3.1.6
cpqDaManagedCableVendorSerialNumbermandatory
Managed Cable Vendor Serial Number.

Indicates the vendor serial number of the managed cable. If the
managed cable does not support vendor serial number, the instrument
agent will return a NULL string.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.232.3.2.2.3.1.7
cpqDaManagedCableVendorPartNumbermandatory
Managed Cable Vendor Part Number.

Indicates the vendor part number of the managed cable. If the managed
cable does not support vendor part number, the instrument agent
will return a NULL string.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.232.3.2.2.3.1.8
cpqDaManagedCableLengthmandatory
Managed Cable Length.

Indicates the length of the managed cable in meters. This field will
contain -1 if the cable length cannot be determined or if the managed
cable does not support reporting cable len…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.2.3.1.9

cpqDaLogDrvTable

table mandatory
.1.3.6.1.4.1.232.3.2.3.1 · 1 row entry · 25 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaLogDrvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaLogDrvTable' 
Drive Array Logical Drive Table.
          
A table of logical drive entries.
cpqDaLogDrvEntry row .1.3.6.1.4.1.232.3.2.3.1.1
Drive Array Logical Drive Entry.

A logical drive entry.
Indexes
Column Syntax OID
cpqDaLogDrvCntlrIndexmandatory
Drive Array Logical Drive Controller Index.

This maps the logical drives into their respective controllers.
Controller index `i` under the controller group owns the
associated drives in the logical drive …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.1.1.1
cpqDaLogDrvIndexmandatory
Drive Array Logical Drive Index.

This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller index value, the logical drive index s…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.1.1.2
cpqDaLogDrvFaultTolmandatory
Logical Drive Fault Tolerance.

This shows the fault tolerance mode of the logical drive.
The following values are valid for the Logical Drive Fault
Tolerance:

None (2)
Fault tolerance is …
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.3
cpqDaLogDrvStatusmandatory
Logical Drive Status.

The logical drive can be in one of the following states:

Ok (2)
Indicates that the logical drive is in normal operation mode.

Failed (3)
Indicates t…
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.4
cpqDaLogDrvAutoRelmandatory
Array Controller Logical Drive Auto-Reliability Delay.

This value indicates how many seconds the logical drive will wait
with no requests before beginning Auto-Reliability monitoring.
For example, the def…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.3.2.3.1.1.5
cpqDaLogDrvRebuildBlksobsolete
Logical Drive Rebuild Blocks Remaining.

After a failed physical drive has been replaced, the physical
drive must have its data rebuilt. This value shows how many
blocks of data still need to be rebuilt. …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.3.1.1.6
cpqDaLogDrvHasAccelmandatory
Logical Drive Has Cache Module Board.

This indicates whether the logical drive has a Cache Module
board configured and enabled. The following values are valid:

Other (1)
Indicates that t…
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.7
cpqDaLogDrvAvailSparesobsolete
Drive Array Logical Drive Available Spares.

This indicates if this logical drive has one or more spares
designated for it that are not currently in use by another drive.
Each octet present will be a physi…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.1.1.8
cpqDaLogDrvSizemandatory
Logical Drive Size.

This is the size of the logical drive in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000,000 as …
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.3.2.3.1.1.9
cpqDaLogDrvPhyDrvIDsobsolete
Drive Array Logical Drive Physical Drive IDs.

This lists the physical drive IDs which are associated with this
logical drive. These are the same IDs which can be used as
indices into the physical drive ta…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.1.1.10
cpqDaLogDrvConditionmandatory
The Logical Drive condition.

This value represents the overall condition of this logical drive and
any associated physical drives.
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.11
cpqDaLogDrvPercentRebuildmandatory
Logical Drive Percent Rebuild.

After a failed physical drive has been replaced, the physical
drive must have its data rebuilt. This value is the percent
complete of the rebuild. When the value reaches 1…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.3.1.1.12
cpqDaLogDrvStripeSizemandatory
Logical Drive Stripe Size.

This is the size of a logical drive stripe in kilobytes.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.1.1.13
cpqDaLogDrvOsNamemandatory
Logical Drive OS Name.

The OS name for this array logical drive. This field will be
a null (size 0) string if the agent does not support OS name.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.1.1.14
cpqDaLogDrvBlinkTimemandatory
Logical Drive Physical Drive Blink Time Count.

The logical drive blink time variable allows the drive tray LEDs
of all physical drives in a logical drive to blink. This value
indicates the amount of time…
RFC1155-SMICounterr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.3.1.1.15
cpqDaLogDrvSpareReplaceMapobsolete
Logical Drive Spare To Replacement Drive Map.

This data structure contains the spare to physical drive
replacement map. The format is:

octet contents
===== ========
1 Spare dr…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.232.3.2.3.1.1.16
cpqDaLogDrvRebuildingPhyDrvmandatory
Logical Drive Physical Drive Rebuilding Index.

This is the physical drive index of the physical drive that is
currently rebuilding. If the value cannot be determined or is
not applicable, the value is se…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.1.1.17
cpqDaLogDrvMultipathAccessmandatory
Logical Drive Multi-path Access.

This indicates whether all the physical disks including spares
of this logical drive have been configured to have and currently
still have more than one I/O path to the co…
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.18
cpqDaLogDrvNmbrOfParityGroupsmandatory
Logical Drive Number Of Parity Groups.

Indicates the number of parity groups (i.e. RAID 4/5/6 subvolumes),
that are being striped across.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.3.2.3.1.1.19
cpqDaLogDrvSplitMirrorBackupLogDrvmandatory
Logical Drive Split Mirror Backup Logical Drive.

Indicates if this logical drive is a backup logical drive
belonging to a split mirror.

The following values are defined:

othe…
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.20
cpqDaLogDrvCacheVolAccelAssocTypemandatory
Logical Drive Cache Volume Accelerator Association Type.

Indicates the way in which this logical drive is associated with a
cache volume accelerator group.

The following values are defined…
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.21
cpqDaLogDrvCacheVolIndexmandatory
Logical Drive Cache Volume Index.

The logical drive index of the cache volume used by this logical
drive. The value of this index is the same as the logical drive index
used in the cache volume accelerat…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.1.1.22
cpqDaLogDrvRPIPercentCompletemandatory
Logical Drive Rapid Parity Initialization Percent Complete.

When a fault tolerant logical volume is created, parity data for
the volume must be initialized. This value is the percent complete
of the rapid…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.3.1.1.23
cpqDaLogDrvSSDSmartPathStatusmandatory
Logical Drive SSD Smart Path Status.

Indicates the logical drive SSD Smart Path status. An SSD Smart Path
for a logical drive can be utilized only when both the Smart
Array firmware and Smart Array contro…
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.24
cpqDaLogDrvEncryptionStatusmandatory
Logical Drive Encryption Status.

Indicates the logical drive encryption status.

The following values are defined:

Other (1)
Indicates that the instrument agent can not …
Enumeration .1.3.6.1.4.1.232.3.2.3.1.1.25

cpqDaLogDrvPhyDrvExtAttachTable

table mandatory
.1.3.6.1.4.1.232.3.2.3.2 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaLogDrvPhyDrvExtAttachTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaLogDrvPhyDrvExtAttachTable' 
Drive Array Logical Drive Physical Drive Extended Attachment 
Table.
          
A table of logical drives and their associated physical drives.
cpqDaLogDrvPhyDrvExtAttachEntry row .1.3.6.1.4.1.232.3.2.3.2.1
Drive Array Logical Drive Extended Physical Drive Attachment
Entry.
Indexes
Column Syntax OID
cpqDaLogDrvPhyDrvAttachExtIndexmandatory
Drive Array Logical Drive Extended Attach Index.

This index identifies a controller, logical drive and
physical drive connection. This index uniquely identifies
a connection for each attached hard drive.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.2.1.1
cpqDaLogDrvCntlrExtendedmandatory
Drive Array Logical Drive Controller Extended.

This maps the logical drives into their respective controllers. This
value is a logical number whose meaning is OS dependent. The value
has a direct mapping …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.2.1.2
cpqDaLogDrvLogDrvExtendedmandatory
Drive Array Logical Drive Extended.

This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller value, the logical drive value star…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.2.1.3
cpqDaLogDrvPhyDrvExtendedmandatory
Drive Array Logical Drive Physical Drive Extended.

This value is used for selecting the physical drive number in
the table entry. This number keeps track of multiple instances of
physical drives which are…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.2.1.4

cpqDaLogDrvSprRplcExtAttachTable

table mandatory
.1.3.6.1.4.1.232.3.2.3.3 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaLogDrvSprRplcExtAttachTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaLogDrvSprRplcExtAttachTable' 
Drive Array Logical Drive Spare Replacement Extended Attachment 
Table.
          
A table of logical drives, physical drives and their replacement 
drives.  If spare drives are not used, this table will not be 
populated.
cpqDaLogDrvSprRplcExtAttachEntry row .1.3.6.1.4.1.232.3.2.3.3.1
Drive Array Logical Drive Spare Replacement Extended Attachment
Entry.
Indexes
Column Syntax OID
cpqDaLogDrvSprRplcAttachExtIndexmandatory
Drive Array Logical Drive Spare Replacment Extended Attach Index.

This index uniquely identifies a controller, logical drive, physical drive
and replacement drive connection.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.3.1.1
cpqDaLogDrvSprRplcCntlrExtendedmandatory
Drive Array Logical Drive Spare Replacement Controller Extended.

This value maps the spare replacement drives into their respective
controllers. This value is a logical number whose meaning is OS
depend…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.3.1.2
cpqDaLogDrvSprRplcLogDrvExtendedmandatory
Drive Array Logical Drive Spare Replace Logical Drive Extended.

This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller value, …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.3.1.3
cpqDaLogDrvSprRplcReplacedPhysDrvExtendedmandatory
Drive Array Logical Drive Spare Replace Replaced Physical
Drive Extended.

This is the replaced drive physical drive number.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.3.1.4
cpqDaLogDrvSprRplcSparePhysDrvExtendedmandatory
Drive Array Logical Drive Spare Replace Spare Physical
Drive Extended.

This is the replacement spare physical drive number.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.3.1.5

cpqDaLogDrvAvalSprExtAttachTable

table mandatory
.1.3.6.1.4.1.232.3.2.3.4 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaLogDrvAvalSprExtAttachTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaLogDrvAvalSprExtAttachTable' 
Drive Array Logical Drive Available Spare Extended Attachment 
Table.
          
A table of logical drives and their available spare drives. This
table indicates when a logical drive has one or more spare drives 
designated for it. This table will not be populated when available
spares are not being used.
cpqDaLogDrvAvalSprExtAttachEntry row .1.3.6.1.4.1.232.3.2.3.4.1
Drive Array Logical Drive Available Spare Extended Attachment
Entry.
Indexes
Column Syntax OID
cpqDaLogDrvAvailSprAttachExtIndexmandatory
Drive Array Logical Drive Available Spare Extended Attach Index.

This index uniquely identifies a controller, logical drive and available
spare drive connection.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.4.1.1
cpqDaLogDrvAvailSprCntlrExtendedmandatory
Drive Array Logical Drive Available Spare Controller Extended.

This value maps the available spare drives into their respective
controllers This value is a logical number whose meaning is OS
dependent. …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.4.1.2
cpqDaLogDrvAvailSprLogDrvExtendedmandatory
Drive Array Logical Drive Available Spare Logical Drive Extended.

This logical drive number keeps track of multiple instances of
logical drives which are on the same controller. For each
controller value…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.3.4.1.3
cpqDaLogDrvAvailSprAvailableSpareExtendedmandatory
Drive Array Logical Drive Available Spare Available Spare Extended.

This is the available spare drive number assigned to one or more
logical drives.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.3.4.1.4

cpqDaLogDrvCacheVolumeAccelTable

table mandatory
.1.3.6.1.4.1.232.3.2.3.5 · 1 row entry · 33 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaLogDrvCacheVolumeAccelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaLogDrvCacheVolumeAccelTable' 
Drive Array Logical Drive Cache Volume Accelerator Table.
          
The cpqDaLogDrvCacheVolumeAccelTable table contains configuration 
and statistical information about cache volumes. This table will not
be populated when logical drive cache volumes are not being used.
cpqDaLogDrvCacheVolumeAccelEntry row .1.3.6.1.4.1.232.3.2.3.5.1
Drive Array Logical Drive Cache Volume Accelerator Entry.

A cache volume entry.
Indexes
Column Syntax OID
cpqDaLogDrvCacheVolAccelCntlrIndexmandatory
Drive Array Logical Drive Cache Volume Accelerator Controller Index.

This index maps the cache volume back to the controller to which
it is attached. The value of this index is the same as the index
used…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.1
cpqDaLogDrvCacheVolAccelLogDrvIndexmandatory
Drive Array Logical Drive Cache Volume Accelerator Logical Drive
Index.

The logical drive index for this cache volume. The value of this
index is the same as the logical drive index used in the logical
…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.2
cpqDaLogDrvCacheVolAccelCachingAlgorithmmandatory
Drive Array Logical Drive Cache Volume Accelerator Caching Algorithm.

The caching algorithm currently in use for the cache volume.

The following values are defined:

Other(1)
…
Enumeration .1.3.6.1.4.1.232.3.2.3.5.1.3
cpqDaLogDrvCacheVolAccelCacheStatemandatory
Drive Array Logical Drive Cache Volume Accelerator Cache State.

The current cache state of the cache volume.

The following values are defined:

Other(1)
The instrument agent…
Enumeration .1.3.6.1.4.1.232.3.2.3.5.1.4
cpqDaLogDrvCacheVolAccelWritePolicymandatory
Drive Array Logical Drive Cache Volume Accelerator Write Policy.

The write policy that the cache volume has been configured to use.

The following values are defined:

Other(1)…
Enumeration .1.3.6.1.4.1.232.3.2.3.5.1.5
cpqDaLogDrvCacheVolAccelNoOfReadHitsHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Hits (high).

cpqDaLogDrvCacheVolAccelNoOfReadHitsH and
cpqDaLogDrvCacheVolAccelNoOfReadHits together show the number of read
cache …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.6
cpqDaLogDrvCacheVolAccelNoOfReadHitsmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Hits (low).

cpqDaLogDrvCacheVolAccelNoOfReadHits and
cpqDaLogDrvCacheVolAccelNoOfReadHitsH together show the number of read
cache h…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.7
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Do Load (high).

cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH and
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad together show t…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.8
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Do Load (low).

cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoad and
cpqDaLogDrvCacheVolAccelNoOfReadMissDoLoadH together show th…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.9
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Loading (high).

cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH and
cpqDaLogDrvCacheVolAccelNoOfReadMissLoading together show…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.10
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Loading (low).

cpqDaLogDrvCacheVolAccelNoOfReadMissLoading and
cpqDaLogDrvCacheVolAccelNoOfReadMissLoadingH together show …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.11
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Skip (high).

cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH and
cpqDaLogDrvCacheVolAccelNoOfReadMissSkip together show the numb…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.12
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Skip (low).

cpqDaLogDrvCacheVolAccelNoOfReadMissSkip and
cpqDaLogDrvCacheVolAccelNoOfReadMissSkipH together show the numbe…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.13
cpqDaLogDrvCacheVolAccelReadCacheHitRatemandatory
Drive Array Logical Drive Cache Volume Accelerator Read Cache
Hit Rate.

The rate (percentage) that the read cache for this cache volume is
being utilized. If the value cannot be determined or read cache h…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.3.5.1.14
cpqDaLogDrvCacheVolAccelNoOfWriteHitsHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Hits (high).

cpqDaLogDrvCacheVolAccelNoOfWriteHitsH and
cpqDaLogDrvCacheVolAccelNoOfWriteHits together show the number of
write ca…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.15
cpqDaLogDrvCacheVolAccelNoOfWriteHitsmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Hits (low).

cpqDaLogDrvCacheVolAccelNoOfWriteHits and
cpqDaLogDrvCacheVolAccelNoOfWriteHitsH together show the number of
write cac…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.16
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Do Load (high).

cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad show the num…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.17
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Do Load (low).

cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoad and
cpqDaLogDrvCacheVolAccelNoOfWriteMissDoLoadH show the numb…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.18
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Loading (high).

cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading show the nu…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.19
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Loading (low).

cpqDaLogDrvCacheVolAccelNoOfWriteMissLoading and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLoadingH show the num…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.20
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Skip (high).

cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip together show the nu…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.21
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Skip (low).

cpqDaLogDrvCacheVolAccelNoOfWriteMissSkip and
cpqDaLogDrvCacheVolAccelNoOfWriteMissSkipH together show the num…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.22
cpqDaLogDrvCacheVolAccelWriteCacheHitRatemandatory
Drive Array Logical Drive Cache Volume Accelerator Write Cache
Hit Rate.

The rate (percentage) that the write cache for this cache volume is
being utilized. If the value cannot be determined or write cach…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.3.5.1.23
cpqDaLogDrvCacheVolAccelLoadFailuresmandatory
Drive Array Logical Drive Cache Volume Accelerator Load Failures.

The number of times data failed to load onto this cache volume due
to an error. If the value cannot be determined or is not applicable,
it…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.24
cpqDaLogDrvCacheVolAccelCacheLineSizemandatory
Drive Array Logical Drive Cache Volume Accelerator Cache Line Size.

cpqDaLogDrvCacheVolAccelCacheLineSize is the cache line size in
number of blocks. If the value cannot be determined or is not
applicab…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.25
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (high).

cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH and
cpqDaLogDrvCacheVolAccelNoOfReadMissLocked together show the…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.26
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (low).

cpqDaLogDrvCacheVolAccelNoOfReadMissLocked and
cpqDaLogDrvCacheVolAccelNoOfReadMissLockedH together show the …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.27
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Locked (high).

cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked together show …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.28
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Locked (low).

cpqDaLogDrvCacheVolAccelNoOfWriteMissLocked and
cpqDaLogDrvCacheVolAccelNoOfWriteMissLockedH together show th…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.29
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Total (high).

cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH and
cpqDaLogDrvCacheVolAccelNoOfReadMissTotal together show the to…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.30
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Read
Cache Misses - Total (low).

cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH together show the tot…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.31
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalHmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Total (high).

cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalH and
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotal together show the…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.32
cpqDaLogDrvCacheVolAccelNoOfWriteMissTotalmandatory
Drive Array Logical Drive Cache Volume Accelerator Number Of Write
Cache Misses - Total (low).

cpqDaLogDrvCacheVolAccelNoOfReadMissTotal and
cpqDaLogDrvCacheVolAccelNoOfReadMissTotalH together show the to…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.3.5.1.33

cpqDaSpareTable

table mandatory
.1.3.6.1.4.1.232.3.2.4.1 · 1 row entry · 12 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaSpareTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaSpareTable' 
Drive Array Spare Table.
          
A table of spare entries.
cpqDaSpareEntry row .1.3.6.1.4.1.232.3.2.4.1.1
Drive Array Spare Entry.

An entry in the spare table.
Indexes
Column Syntax OID
cpqDaSpareCntlrIndexmandatory
Drive Array Spare Controller Index.

This index maps the spare drive back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.4.1.1.1
cpqDaSparePhyDrvIndexmandatory
Drive Array Spare Physical Drive Index.

This index maps the spare to the physical drive it represents.
The value of this index is the same as the one used with the
physical drive table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.4.1.1.2
cpqDaSpareStatusmandatory
Spare Status.

This shows the status of the on-line spare drive.

The following values are valid for the spare status:

Failed (3)
The on-line spare has failed and is no longe…
Enumeration .1.3.6.1.4.1.232.3.2.4.1.1.3
cpqDaSpareReplacedDrvmandatory
Spare Replaced Drive.

If the spare status is active(6) or building(5), then this
has the physical drive number of the replaced drive. Otherwise
a value of -1 will be returned.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.4.1.1.4
cpqDaSpareRebuildBlksobsolete
Drive Array Spare Number Of Rebuild Blocks Left.

If the spare status is building(5), then this is the number of
blocks left to rebuild before completion.

The data contained on the failed ph…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.4.1.1.5
cpqDaSpareConditionmandatory
The Spare Drive condition.

This value represents the overall condition of this spare drive
and any associated physical drives.
Enumeration .1.3.6.1.4.1.232.3.2.4.1.1.6
cpqDaSpareBusNumbermandatory
Spare Drive SCSI Bus Number.

The bus number indicates to which SCSI bus this spare drive
is attached. The first instance is one and increments for
each SCSI bus on a controller. A value of -1 will be
re…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.4.1.1.7
cpqDaSpareBaymandatory
Spare Drive Bay Location.

This value matches the bay location where the physical drive has
been installed. For a SCSI drive, this is the SCSI ID of the
drive.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.4.1.1.8
cpqDaSpareReplacedDrvBusNumbermandatory
Spare Replaced Drive Bus Number.

If the spare status is active(6) or building(5), then this
has the physical drive bus number of the replaced drive.
If the value cannot be determined or is not applicable,…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.4.1.1.9
cpqDaSpareReplacedDrvBaymandatory
Spare Replaced Drive Bay.

If the spare status is active(6) or building(5), then this
has the physical drive bay number of the replaced drive.
If the value cannot be determined or is not applicable, the
va…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.4.1.1.10
cpqDaSparePercentRebuildmandatory
Drive Array Spare Percent Rebuild.

If the spare status is building(5), then this is percent
complete of of the rebuild.

The data contained on the failed physical drive must be
reconstructed…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.4.1.1.11
cpqDaSpareLocationStringmandatory
Spare Drive Location String.

This string describes the location of the drive in relation to
the controller. If the location string cannot be determined,
the agent will return a NULL string.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.4.1.1.12

cpqDaPhyDrvTable

table mandatory
.1.3.6.1.4.1.232.3.2.5.1 · 1 row entry · 80 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaPhyDrvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaPhyDrvTable' 
Drive Array Physical Drive Table.
          
A table of physical drive entries.
cpqDaPhyDrvEntry row .1.3.6.1.4.1.232.3.2.5.1.1
Drive Array Physical Drive Entry.

A physical drive entry.
Indexes
Column Syntax OID
cpqDaPhyDrvCntlrIndexmandatory
Drive Array Physical Drive Controller Index.

This index maps the physical drive back to the controller to
which it is attached. The value of this index is the same as
the one used under the controller gro…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.1
cpqDaPhyDrvIndexmandatory
Drive Array Physical Drive Index.

This index is used for selecting the physical drive table entry.
This number, along with the cpqDaPhyDrvCntlrIndex uniquely
identify a specific physical drive.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.5.1.1.2
cpqDaPhyDrvModelmandatory
Physical Drive Model.

This is a text description of the physical drive. The text that
appears depends upon who manufactured the drive and the drive
type.

If a drive fails, note the model t…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.1.1.3
cpqDaPhyDrvFWRevmandatory
Physical Drive Firmware Revision.

This shows the physical drive revision number.

If the firmware revision is not present, you have not properly
initialized the drive array.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.3.2.5.1.1.4
cpqDaPhyDrvBaymandatory
Physical Drive Bay Location.

This value matches the bay location where the physical drive has
been installed. For a SCSI drive, this is the SCSI ID of the
drive. For a SAS or SATA drive, this is the bay…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.1.1.5
cpqDaPhyDrvStatusmandatory
Physical Drive Status.

This shows the status of the physical drive.

The following values are valid for the physical drive status:


Other (1)
Indicates that th…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.6
cpqDaPhyDrvFactReallocsmandatory
This shows the number of spare sectors available for
remapping at the time the physical drive was shipped.
The physical drive will use these spare sectors for remapping
bad sectors that exist on the drive. Not all driv…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.7
cpqDaPhyDrvUsedReallocsmandatory
Physical Drive Used Reallocated Sectors.

This shows the number of sectors of the reallocation area that
have been used by the physical drive.

To see how many sectors were originally availab…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.8
cpqDaPhyDrvRefHoursmandatory
Reference Time in hours.

This shows the total number of hours that a physical drive has
been in operation since the drive was stamped. The drive will have
either been stamped when it left the factory or …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.9
cpqDaPhyDrvHReadsmandatory
Sectors Read (high).

The phyDrvHReads and the phyDrvReads together shows the total
number of sectors read from the physical disk drive during the
reference time (phyDrvRefHours).

The actual…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.10
cpqDaPhyDrvReadsmandatory
Sectors Read (low).

The phyDrvHReads and the phyDrvReads together shows
the total number of sectors read from the physical disk drive
during the reference time (phyDrvRefHours).

The actual …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.11
cpqDaPhyDrvHWritesmandatory
Sectors Written (high).

The phyDrvHWrites and the phyDrvWrites together shows the
total number of sectors written to the physical disk drive
during the reference hours (phyDrvRefHours).

The…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.12
cpqDaPhyDrvWritesmandatory
Sectors Written (low).

The phyDrvHWrites and the phyDrvWrites together
shows the total number of sectors written to the physical
disk drive during the reference hours (phyDrvRefHours).

The …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.13
cpqDaPhyDrvHSeeksmandatory
Total Seeks (high).

The phyDrvHSeeks and the phyDrvSeeks together shows the total
number of seek operations performed by the physical disk drive
during the reference hours (phyDrvRefHours).
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.14
cpqDaPhyDrvSeeksmandatory
Total Seeks (low).

The phyDrvHSeeks and the phyDrvSeeks together shows the total
number of seek operations performed by the physical disk drive
during the reference hours (phyDrvRefHours).

…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.15
cpqDaPhyDrvHardReadErrsmandatory
Hard Read Errors.

This shows the number of read errors that have occurred on a
drive that could not be recovered by a physical drive`s Error
Correction Code (ECC) algorithm or through retries during the
r…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.16
cpqDaPhyDrvRecvReadErrsmandatory
Recovered Read Errors.

This shows the number of read errors corrected through physical
drive retries during the reference time (phyDrvRefTime).

Over time, all disk drives produce these erro…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.17
cpqDaPhyDrvHardWriteErrsmandatory
Hard Write Errors.

This shows the number of write errors that could not be recovered
by a physical drive during the reference time (phyDrvRefTime).

Over time a disk drive may detect these e…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.18
cpqDaPhyDrvRecvWriteErrsmandatory
Recovered Write Errors.

This shows the number of write errors corrected through physical
drive retries or recovered by a physical drive during the
reference time (phyDrvRefTime).

Over time …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.19
cpqDaPhyDrvHSeekErrsmandatory
Seek Errors (High).

The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the
total number of times that the physical disk drive detected a
seek error during the reference hours (phyDrvRefHours).
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.20
cpqDaPhyDrvSeekErrsmandatory
Seek Errors (low).
The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the
total number of times that the physical disk drive detected a
seek error during the reference hours (phyDrvRefHours).

The a…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.21
cpqDaPhyDrvSpinupTimemandatory
Spin up Time in tenths of seconds.

This is the time it takes for a physical drive to spin up to full
speed.

Disks require time to gain momentum and reach operating speed. As
cars are tested…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.22
cpqDaPhyDrvFunctTest1obsolete
Functional Test 1.

This provides information about a series of tests that indicate
how well a physical drive works. These tests compare the way the
physical drive currently operates when performing variou…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.23
cpqDaPhyDrvFunctTest2obsolete
Functional Test 2.

This provides information about a series of tests that indicate
how well a physical drive works. These tests compare the way the
physical drive currently operates when performing variou…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.24
cpqDaPhyDrvFunctTest3obsolete
Functional Test 3.

This provides information about a series of tests that indicate
how well a physical drive works. These tests compare the way the
physical drive currently operates when performing variou…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.25
cpqDaPhyDrvDrqTimeoutsmandatory
DRQ Timeouts.

The number of times that a physical drive continued to request
data, but did not get a command completion during the reference
time (phyDrvRefTime). This value increases every time a DRQ
ti…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.26
cpqDaPhyDrvOtherTimeoutsmandatory
Other Timeouts.

The number of times that a physical drive did not respond with an
interrupt within a controller-defined period of time after a
command had been issued during the reference time (phyDrvRefT…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.27
cpqDaPhyDrvSpinupRetriesmandatory
Spin up Retries.

The number of times that a physical drive had to retry to spin up
before successfully achieving operating speed during the reference
time (phyDrvRefTime). This value represents the spin-u…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.28
cpqDaPhyDrvBadRecvReadsmandatory
Recovery Failed (Bad) Read Error.

The number of times a read error occurred while performing
Automatic Data Recovery from this physical drive to another
drive during the reference time (phyDrvRefTime).
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.29
cpqDaPhyDrvBadRecvWritesmandatory
Recovery Failed (Bad) Write Error.

The number of times a write error occurred while performing
Automatic Data Recovery from another drive to this physical
drive during the reference time (phyDrvRefTime).
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.30
cpqDaPhyDrvFormatErrsmandatory
Format Error.

The number of times a format operation failed when the controller
attempted to remap a bad sector during the reference time
(phyDrvRefTime). Zero indicates that no format errors have
occurr…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.31
cpqDaPhyDrvPostErrsmandatory
Power On Self Test (Post) Error.

The number of times that a physical drive failed its self test
during the reference time (phyDrvRefTime).

The physical drive does a self test each time powe…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.32
cpqDaPhyDrvNotReadyErrsmandatory
Drive Not Ready Errors.

The number of times the physical drive failed after the spin up
command was issued during the reference time (phyDrvRefTime).
When the spin up command was issued, the drive failed …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.33
cpqDaPhyDrvReallocAbortsmandatory
Physical Drive Reallocation Aborts.

The number of times the physical drive has failed due to an error
that occurred when the controller was trying to reallocate a bad
sector during the reference time (phy…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.34
cpqDaPhyDrvThreshPassedmandatory
Physical Drive Factory Threshold Passed (Exceeded).

When the drive is shipped, certain thresholds have been set to
monitor performance of the drives. For example, a threshold
might be set for Spin up Tim…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.35
cpqDaPhyDrvHasMonInfomandatory
Physical Drive Has Monitor Information.

All of the physical disk table fields except for the physical
disk status (phyDrvStatus) and the bay location
(phyDrvBayLocation) are invalid unless this field has …
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.36
cpqDaPhyDrvConditionmandatory
The condition of the device.
This value represents the overall condition of this physical
drive.
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.37
cpqDaPhyDrvHotPlugsmandatory
Physical Drive Hot Plug Count.

This value indicates the number of times this physical drive
was hot-plugged (removed) from a ProLiant Storage System.
This is not supported by the IDA, IDA Expansion, or ID…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.38
cpqDaPhyDrvMediaErrsmandatory
Physical Drive Media Failure Count.

This value indicates the number of times this physical drive
was failed due to unrecoverable media errors. This is not
supported by the IDA, IDA Expansion, or IDA-2 co…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.39
cpqDaPhyDrvHardwareErrsmandatory
Physical Drive Hardware Error Count.

This value indicates the number of times this physical drive
returned a bad hardware status. The drive may be failed if
retries do not work. This is not supported by …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.40
cpqDaPhyDrvAbortedCmdsmandatory
Physical Drive Aborted Command Failures.

This value indicates the number of times this physical drive
was failed due to aborted commands that could not be retried
successfully. This is not supported by t…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.41
cpqDaPhyDrvSpinUpErrsmandatory
Physical Drive Spin-Up Failure Count.

This value indicates the number of times this physical drive
was failed due to a failure of a spin-up command. This is not
supported by the IDA, IDA Expansion, or ID…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.42
cpqDaPhyDrvBadTargetErrsmandatory
Physical Drive Bad Target Count.

This value indicates the number of times this physical drive
performed some action that did not conform to the SCSI-2 bus
protocol. These actions will cause the SCSI bus …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.43
cpqDaPhyDrvLocationobsolete
Drive Physical Location.

This is the physical location of where the drive is located.
The following values are defined:

other(1)
The location of the drive is not known.

int…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.44
cpqDaPhyDrvSizemandatory
Physical Drive Size in MB.

This is the size of the physical drive in megabytes. This value
is calculated using the value 1,048,576 (2^20) as a megabyte.
Drive manufacturers sometimes use the number 1,000…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.45
cpqDaPhyDrvBusFaultsmandatory
Physical Drive Bus Fault Count.

This value indicates the number of times that a bus fault was
detected for the drive by the controller. This is not supported
by the IDA, IDA Expansion, or IDA-2 controlle…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.46
cpqDaPhyDrvIrqDeglitchesmandatory
Physical Drive IRQ Deglitch Count.

This is not supported by the IDA, IDA Expansion, or IDA-2
controllers.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.47
cpqDaPhyDrvHotPlugmandatory
Physical Drive Hot Plug Support Status.

The following values are defined:

other(1)
The Insight Agent is unable to determine if this drive
supports hot plug replacement.

h…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.48
cpqDaPhyDrvPlacementmandatory
Physical Drive Placement.

The following values are defined:

other(1)
The agent is unable to determine if the drive is internal or
external to the system chassis.

internal…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.49
cpqDaPhyDrvBusNumbermandatory
Physical Drive SCSI Bus Number.

The bus number indicates to which SCSI bus this physical
drive is attached. The first instance is one and increments
for each SCSI bus on a controller. A value of -1 will…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.50
cpqDaPhyDrvSerialNummandatory
Physical Drive Serial Number.

This is the serial number assigned to the physical drive.
This value is based upon the serial number as returned by the
SCSI inquiry command but may have been modified due to…
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.232.3.2.5.1.1.51
cpqDaPhyDrvPreFailMonitoringmandatory
Drive Array Physical Drive Predictive Failure Monitoring.

The following values are defined:

other(1)
The agent is unable to determine if the drive supports
predictive failure monitoring…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.52
cpqDaPhyDrvCurrentWidthmandatory
Drive Array Physical Drive Current Width.

The following values are defined:

other(1)
The agent is unable to determine the current negotiated data
transfer width for this drive.
…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.53
cpqDaPhyDrvCurrentSpeedmandatory
Drive Array Physical Drive Current Data Transfer Speed.

The following values are defined:

other(1)
The agent is unable to determine the current negotiated data
transfer speed for this d…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.54
cpqDaPhyDrvFailureCodemandatory
Drive Array Physical Drive Failure Code.

This value is the drive failure reason code returned by the
array firmware. It is valid only when the drive is failed.
If the drive is not failed, 0 is returned.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.55
cpqDaPhyDrvBlinkTimemandatory
Physical Drive Blink Time Count.

This value indicates the amount of time, in tenths of a second,
that the physical drive LEDs will continue to blink. A value of
zero indicates the drive LEDs are not blin…
RFC1155-SMICounterr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.56
cpqDaPhyDrvSmartStatusmandatory
Physical Drive S.M.A.R.T Status.

The following values are defined:

other(1)
The agent is unable to determine if the status of S.M.A.R.T
predictive failure monitoring for this drive.
…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.57
cpqDaPhyDrvConfigurationStatusmandatory
Physical Drive Configuration Status.

The following values are defined:

other(1)
The agent is unable to determine the configuration status of
this physical drive.

configur…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.58
cpqDaPhyDrvRotationalSpeedmandatory
Drive Array Physical Drive Rotational Speed.

The following values are defined:

other(1)
The agent is unable to determine the rotational speed for
this drive.

rpm7200(2)
…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.59
cpqDaPhyDrvTypemandatory
Physical Drive Type.

The following values are defined:

other(1)
The agent is unable to determine the type for this drive.

parallelScsi(2)
The drive type is parallel SCSI.…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.60
cpqDaPhyDrvSataVersionmandatory
Physical Drive SATA Version.

The following values are defined:

other(1)
The agent is unable to determine the SATA version for this
drive or it is not a SATA drive.

sataOn…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.61
cpqDaPhyDrvHostConnectormandatory
Physical Drive Host Connector.

This is the host connector to which the drive is ultimately
attached. If the host connector cannot be determined, the agent
will return a NULL string.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.232.3.2.5.1.1.62
cpqDaPhyDrvBoxOnConnectormandatory
Physical Drive Box on Connector.

The box on connector indicates to which box instance this
physical drive belongs. The instances start at one and increment for
each box attached to a connector. A value o…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.63
cpqDaPhyDrvLocationStringmandatory
Physical Drive Location String.

This string describes the location of the drive in relation to
the controller. If the location string cannot be determined,
the agent will return a NULL string.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.1.1.64
cpqDaPhyDrvNegotiatedLinkRatemandatory
Drive Array Physical Drive Negotiated Link Rate.

The following values are defined:

other(1)
The agent is unable to determine the negotiated link rate
this drive or it is not a SAS or SA…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.65
cpqDaPhyDrvNcqSupportmandatory
Drive Array Physical Drive Native Command Queueing.

The following values are defined:

other(1)
The agent is unable to determine the NCQ configuration for
this drive or it is not a SATA …
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.66
cpqDaPhyDrvPhyCountmandatory
Drive Array Physical Drive PHY Count.

This value indicates how many PHYs exist on SAS/SATA disk. For
parallel SCSI disks, this value is set to -1.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.67
cpqDaPhyDrvMultipathAccessmandatory
Drive Array Physical Drive Multi-path Access Status.

This indicates if this physical drive has been configured to have
and currently still has more than one I/O path to the controller.
The following value…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.68
cpqDaPhyDrvMediaTypemandatory
Drive Array Physical Drive Media Type.

The following values are defined:

other(1)
The instrument agent is unable to determine the media type of physical drive.

…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.69
cpqDaPhyDrvCurrentTemperaturemandatory
Drive Array Physical Drive Current Temperature.

This is the temperature of the physical drive in degrees Celsius.
The field will contain -1 if the drive temperature cannot be
calculated or if the contr…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.70
cpqDaPhyDrvTemperatureThresholdmandatory
Drive Array Physical Drive Temperature Threshold.

This is the temperature in degrees Celsius at which the drive says it is
overheated. The field will contain -1 if the drive temperature
threshold cannot …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.71
cpqDaPhyDrvMaximumTemperaturemandatory
Drive Array Physical Drive Maximum Temperature.

This is the maximum temperature in degrees Celsius that the drive has
reached. The field will contain -1 if the maximum drive
temperature cannot be calcu…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.72
cpqDaPhyDrvSSDWearStatusmandatory
Drive Array Physical Drive Solid State Disk Wear Status.

This shows the wear status of the solid state physical drive.

The following values are valid for the physical drive solid state
wear…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.73
cpqDaPhyDrvPowerOnHoursmandatory
Drive Array Physical Drive Power On Hours.

This is the total number of hours that the physical disk
has been powered on. This value will be 4,294,967,295 if the disk
power on hours cannot be determined …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.74
cpqDaPhyDrvSSDPercntEndrnceUsedmandatory
Drive Array Physical Drive Solid State Percent Endurance Used.

This value specifies the hundredths of the percentage of solid state
disk life used. The value of this field is allowed to exceed 100%.
…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.75
cpqDaPhyDrvSSDEstTimeRemainingHoursmandatory
Drive Array Physical Drive Solid State Estimated Time Remaining In
Hours.

This is the estimated total number of hours that the solid state
physical disk has remaining. This value will be 4,294,967,295 if …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.5.1.1.76
cpqDaPhyDrvAuthenticationStatusmandatory
Drive Array Physical Drive Authentication Status.

The following values are defined:

Other (1)
Indicates that the instrument agent can not determine the
physical drive`s authentication s…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.77
cpqDaPhyDrvSmartCarrierAppFWRevmandatory
Physical Drive Smart Carrier Application Firmware Revision.

This displays the physical drive smart carrier application
firmware revision number.

This value will be nonzero if the physical d…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.78
cpqDaPhyDrvSmartCarrierBootldrFWRevmandatory
Physical Drive Smart Carrier Bootloader Firmware Revision.

This displays the physical drive smart carrier bootloader
firmware revision number.

This value will be nonzero if the physical dri…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.1.1.79
cpqDaPhyDrvEncryptionStatusmandatory
Physical Drive Encryption Status.

The physical drive`s encryption status. The following values are
valid:

other (1)
Indicates that the instrument agent does not recognize the
value. Y…
Enumeration .1.3.6.1.4.1.232.3.2.5.1.1.80

cpqDaPhyDrvErrTable

table mandatory
.1.3.6.1.4.1.232.3.2.5.2 · 1 row entry · 15 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaPhyDrvErrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaPhyDrvErrTable' 
Drive Array Physical Drive Error Log Table.
          
A table of physical drive entries.  The Error Log Table is not
supported by the IDA, IDA Expansion, or IDA-2 controllers.
cpqDaPhyDrvErrEntry row .1.3.6.1.4.1.232.3.2.5.2.1
Drive Array Physical Drive Entry.
Indexes
Column Syntax OID
cpqDaPhyDrvErrCntlrIndexmandatory
Drive Array Physical Drive Error Log Controller Index.

This index maps the physical drive back to the controller to
which it is attached. The value of this index is the same as
the one used under the cont…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.2.1.1
cpqDaPhyDrvErrIDIndexmandatory
Drive Array Physical Drive Error Log Index.

This index is used for selecting the physical drive table entry.
This number, along with the cpqDaPhyDrvErrCntlrIndex uniquely
identify a specific physical driv…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.2
cpqDaPhyDrvErrIndexmandatory
Drive Array Physical Drive Error Log Index.

This index is used for selecting the physical drive table entry.
This number, along with the cpqDaPhyDrvErrCntlrIndex uniquely
identify a specific physical driv…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.3.2.5.2.1.3
cpqDaPhyDrvErrTypemandatory
Physical Drive Error Log Error Type.

The type of error in the error log. The valid types are:

Other (1)
Indicates that the instrument agent does not recognize the
type of error in the …
Enumeration .1.3.6.1.4.1.232.3.2.5.2.1.4
cpqDaPhyDrvScsiOpmandatory
Physical Drive Error Log SCSI Operation.

This is the SCSI Command Operation Code byte associated with the
error log entry. For further specifications consult a SCSI-2
logical specification or other SCSI …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.5
cpqDaPhyDrvScsiStatusmandatory
Physical Drive Error Log SCSI Status.

This is the SCSI Status Code byte associated with the error log
entry. For further specifications consult a SCSI-2 logical
specification or other SCSI reference.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.6
cpqDaPhyDrvCamStatusmandatory
Physical Drive Error Log CAM Status.

This is the SCSI CAM Status byte associated with the error log
entry. For further specifications consult a SCSI-2 logical
specification or other SCSI reference.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.7
cpqDaPhyDrvSenseKeymandatory
Physical Drive Error Log Sense Key.

This is the SCSI Sense Key byte associated with the error log
entry. For further specifications consult a SCSI-2 logical
specification or other SCSI reference.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.8
cpqDaPhyDrvQualifiermandatory
Physical Drive Error Log Qualifier.

This is the SCSI Additional Sense Code Qualifier byte (as returned
by the Request Sense command) associated with the error log entry.
For further specifications consult…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.9
cpqDaPhyDrvSenseCodemandatory
Physical Drive Error Log Sense Code.

This is the SCSI Sense Code associated with the error log entry.
For further specifications consult a SCSI-2 logical specification
or other SCSI reference.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.10
cpqDaPhyDrvBlockValidmandatory
Physical Drive Error Log Block Address Is Valid.

The valid values are:

False (1)
Indicates that the Block Address object (cpqDaPhyDrvBlock)
is not a valid address.

True (…
Enumeration .1.3.6.1.4.1.232.3.2.5.2.1.11
cpqDaPhyDrvBlockmandatory
Physical Drive Error Log Block Address.

This is the SCSI Block Address (as returned by the Request Sense
Command) associated with the error log entry. For further
specifications consult a SCSI-2 logical …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.2.1.12
cpqDaPhyDrvTimemandatory
Physical Drive Error Log Reference Time.

This gives a relative time stamp as to when the error log entry
occurred. The Reference Time shows the number of hours that a
physical drive has been spinning sin…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.3.2.5.2.1.13
cpqDaPhyDrvUserDescobsolete
Physical Drive Error Log User Description.

This is a string built by the agent which contains the Reference
Time (cpqDaPhyDrvTime) and a brief description of the disk error
associated with the particular …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.2.1.14
cpqDaPhyDrvErrDescmandatory
The index used to display an error associated with a physical drive.

This number refers to an entry in a list of error strings
enumerating the possible physical drive errors associated with
a particular p…
Enumeration .1.3.6.1.4.1.232.3.2.5.2.1.15

cpqDaPhyDrvPathTable

table mandatory
.1.3.6.1.4.1.232.3.2.5.3 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaPhyDrvPathTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaPhyDrvPathTable' 
Drive Array Physical Drive Access Path Table.
          
A table of access path entries supporting physical drive multi-path
cabling configuration.
cpqDaPhyDrvPathEntry row .1.3.6.1.4.1.232.3.2.5.3.1
Drive Array Physical Drive Access Path Entry.
Indexes
Column Syntax OID
cpqDaPhyDrvPathCntlrIndexmandatory
Drive Array Physical Drive Access Path Controller Index.

This index maps the physical drive access path back to the
controller to which it is attached. The value of this index
is the same as the one used …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.3.1.1
cpqDaPhyDrvPathDrvIndexmandatory
Drive Array Physical Drive Access Path Drive Index.

This index maps the access path to a physical drive.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.5.3.1.2
cpqDaPhyDrvPathIndexmandatory
Drive Array Physical Drive Access Path Index.

This path index keeps track of multiple instances of access
paths from a controller to a physical drive. This number,
along with the cpqDaPhyDrvPathCntlrIndex…
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.232.3.2.5.3.1.3
cpqDaPhyDrvPathStatusmandatory
Physical Drive Access Path Status.

This shows the status of the physical drive access path. The
following values are valid:

Other (1)
Indicates that the instrument agent can not determin…
Enumeration .1.3.6.1.4.1.232.3.2.5.3.1.4
cpqDaPhyDrvPathCurrentRolemandatory
Physical Drive Access Path Current Role.

This shows the current role of physical drive access path.
The following values are valid:

Other (1)
Indicates that the instrument agent does not …
Enumeration .1.3.6.1.4.1.232.3.2.5.3.1.5
cpqDaPhyDrvPathHostConnectormandatory
Physical Drive Access Path Host Connector.

This is the host connector to which the access path is ultimately
attached. If the host connector cannot be determined, the agent
will return a NULL string.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.232.3.2.5.3.1.6
cpqDaPhyDrvPathBoxOnConnectormandatory
Physical Drive Access Path Box on Connector.

The box on connector indicates to which box instance this
physical drive access path belongs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.5.3.1.7
cpqDaPhyDrvPathLocationStringmandatory
Physical Drive Access Path Location String.

This string describes the physical drive access path in relation
to the controller. If the location string cannot be determined,
the agent will return a NULL st…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.5.3.1.8

cpqDaPhyDrvThrTable

table mandatory
.1.3.6.1.4.1.232.3.2.6.1 · 1 row entry · 36 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaPhyDrvThrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaPhyDrvThrTable' 
Drive Array Physical Drive Threshold Table.
          
A table of physical drive threshold entries.
cpqDaPhyDrvThrEntry row .1.3.6.1.4.1.232.3.2.6.1.1
Drive Array Physical Drive Threshold Entry.

A physical drive threshold entry.
Indexes
Column Syntax OID
cpqDaPhyDrvThrCntlrIndexmandatory
Drive Array Physical Drive Threshold Controller Index.

This index maps the physical drive thresholds back to the
controller to which it is attached. The value of this
index is the same as the one used und…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.1
cpqDaPhyDrvThrIndexmandatory
Drive Array Physical Drive Threshold Index.

This index maps the thresholds to a physical drive. The value
of this index is the same as the one used with the physical
drive table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.6.1.1.2
cpqDaPhyDrvThrUsedReallocsmandatory
Used Reallocated Sectors Maximum Threshold.

This shows the maximum threshold of the reallocation area that
has been used by the physical drive.

This threshold is associated with the cpqDaPh…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.3
cpqDaPhyDrvThrRefHoursmandatory
Reference Time Maximum Threshold in hours.

This shows the maximum threshold in hours that a physical drive
has been spinning since the drive was stamped.

This threshold is associated with t…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.4
cpqDaPhyDrvThrHardReadErrsmandatory
Hard Read Errors Maximum Threshold.

This shows the maximum threshold of read errors on a drive that
could not be recovered by a physical drive`s Error Correction
Code (ECC) algorithm or through retries du…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.5
cpqDaPhyDrvThrRecvReadErrsmandatory
Recovered Read Errors Maximum Threshold.

This shows the maximum threshold of read errors corrected through
physical drive retries during the reference time (phyDrvRefTime).

This threshold i…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.6
cpqDaPhyDrvThrHardWriteErrsmandatory
Hard Write Errors Maximum Threshold.

This shows the maximum threshold of write errors that could not
be recovered by a physical drive during the reference time
(phyDrvRefTime).

This thresho…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.7
cpqDaPhyDrvThrRecvWriteErrsmandatory
Recovered Write Errors Maximum Threshold.

This shows the maximum threshold of write errors corrected through
physical drive retries or recovered by a physical drive during the
reference time (phyDrvRefTim…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.8
cpqDaPhyDrvThrHSeekErrsmandatory
Seek Errors Maximum Threshold (high).

The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs
together show the maximum threshold of total number of
times that the physical disk drive detected a seek e…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.9
cpqDaPhyDrvThrSeekErrsmandatory
Seek Errors Maximum Threshold (low).

The cpqDaphyDrvThrHSeekErrs and the cpqDaphyDrvThrSeekErrs
together show the maximum threshold of total number of times
that the physical disk drive detected a seek er…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.10
cpqDaPhyDrvThrSpinupTimemandatory
Spin up Time Maximum Threshold in tenths of seconds.

This shows the maximum of time it takes for a physical drive to
spin up to full speed.

This threshold is associated with the cpqDaPhyDrv…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.11
cpqDaPhyDrvThrFunctTest1obsolete
Functional Test 1 Minimum Threshold.

This provides the minimum threshold for information about a series
of tests that indicate how well a physical drive works. These
tests compare the way the physical dri…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.12
cpqDaPhyDrvThrFunctTest2obsolete
Functional Test 2 Minimum Threshold.

This provides the minimum threshold for information about a
series of tests that indicate how well a physical drive works.
These tests compare the way the physical dri…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.13
cpqDaPhyDrvThrFunctTest3obsolete
Functional Test 3 Minimum Threshold.

This provides the minimum threshold for information about a
series of tests that indicate how well a physical drive works.
These tests compare the way the physical dri…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.14
cpqDaPhyDrvThrDrqTimeoutsmandatory
DRQ Timeouts Maximum Threshold.

This shows the maximum threshold of the number of times that a
physical drive continued to request data, but did not get a
command completion during the reference time (phy…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.15
cpqDaPhyDrvThrOtherTimeoutsmandatory
Other Timeouts Maximum Threshold.

This shows the maximum threshold of the number of times that a
physical drive did not respond with an interrupt within a
controller-defined period of time after a command…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.16
cpqDaPhyDrvThrSpinupRetriesmandatory
Spin up Retries Maximum Threshold.

This shows the maximum threshold of the number of times that a
physical drive had to retry to spin up before successfully
achieving operating speed during the reference …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.17
cpqDaPhyDrvThrBadRecvReadsmandatory
Recovery Failed (Bad) Read Error Maximum Threshold.

This shows the maximum threshold of the number of times a read
error occurred while performing Automatic Data Recovery from
this physical drive to anoth…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.18
cpqDaPhyDrvThrBadRecvWritesmandatory
Recovery Failed (Bad) Write Error Maximum Threshold.

This shows the maximum threshold of the number of times a write
error occurred while performing Automatic Data Recovery from
another drive to this phys…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.19
cpqDaPhyDrvThrFormatErrsmandatory
Format Error Maximum Threshold.

This shows the maximum threshold of the number of times a format
operation failed when the controller attempted to remap a bad
sector during the reference time (phyDrvRefTi…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.20
cpqDaPhyDrvThrPostErrsmandatory
Power On Self Test (Post) Error Maximum Threshold.

This shows the maximum threshold of the number of times that a
physical drive failed its self test during the reference time
(phyDrvRefTime).
…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.21
cpqDaPhyDrvThrNotReadyErrsmandatory
Drive Not Ready Errors Maximum Threshold.

This shows the maximum threshold of the number of times the
physical drive failed after the spin up command was issued
during the reference time (phyDrvRefTime). …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.22
cpqDaPhyDrvThrReallocAbortsmandatory
Physical Drive Reallocation Aborts Maximum Threshold.

This shows the maximum threshold of the number of times the
physical drive has failed due to an error that occurred when
the controller was trying to …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.23
cpqDaPhyDrvThrHotPlugsmandatory
Physical Drive Hot Plug Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can be hot-plugged (removed) from a ProLiant
Storage System.

Thi…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.24
cpqDaPhyDrvThrMediaErrsmandatory
Physical Drive Media Failure Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can be failed due to unrecoverable media errors.

This thres…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.25
cpqDaPhyDrvThrHardwareErrsmandatory
Physical Drive Hardware Error Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can return a bad hardware status. The drive may
be failed if retries do …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.26
cpqDaPhyDrvThrAbortedCmdsmandatory
Physical Drive Aborted Command Failures Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can be failed due to aborted commands that could
not be retried succe…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.27
cpqDaPhyDrvThrSpinUpErrsmandatory
Physical Drive Spin-Up Failure Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive was failed due to a failure of a spin-up command.
This is not supported …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.28
cpqDaPhyDrvThrBadTargetErrsmandatory
Physical Drive Bad Target Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can perform some action that did not conform to
the SCSI-2 bus protocol. Thes…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.29
cpqDaPhyDrvThrViUsedReallocsmandatory
Used Reallocated Sectors Threshold Has Been Violated.

This is used to indicate whether the number of used sectors of
the reallocation area for a physical drive has ever exceeded
the maximum allowable thre…
Enumeration .1.3.6.1.4.1.232.3.2.6.1.1.30
cpqDaPhyDrvThrViSpinupTimemandatory
Spin up Time in tenths of seconds Threshold Has Been Violated.

This is used to indicate whether the time it took for a physical
drive to spin up to full speed has ever exceeded the maximum
allowable thres…
Enumeration .1.3.6.1.4.1.232.3.2.6.1.1.31
cpqDaPhyDrvThrViFunctTest1mandatory
Functional Test 1 Threshold Has Been Violated.

This is used to indicate whether the percentage value returned
from Functional Test 1 has every dropped below the allowable
threshold for that test.
…
Enumeration .1.3.6.1.4.1.232.3.2.6.1.1.32
cpqDaPhyDrvThrViFunctTest2mandatory
Functional Test 2 Threshold Has Been Violated.

This is used to indicate whether the percentage value returned
from Functional Test 2 has every dropped below the allowable
threshold for that test.
…
Enumeration .1.3.6.1.4.1.232.3.2.6.1.1.33
cpqDaPhyDrvThrViFunctTest3mandatory
Functional Test 3 Threshold Has Been Violated.

This is used to indicate whether the percentage value returned
from Functional Test 3 has every dropped below the allowable
threshold for that test.
…
Enumeration .1.3.6.1.4.1.232.3.2.6.1.1.34
cpqDaPhyDrvThrBusFaultsmandatory
Physical Drive Bus Fault Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can return a bus fault status. The drive may
be failed if retries do not work.…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.35
cpqDaPhyDrvThrIrqDeglitchesmandatory
Physical Drive IRQ Deglitch Count Maximum Threshold.

This shows the maximum threshold of the number of times this
physical drive can return a IRQ deglitch status. The drive may
be failed if retries do not…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.6.1.1.36

cpqDaCntlrPerfTable

table mandatory
.1.3.6.1.4.1.232.3.2.7.1 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaCntlrPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaCntlrPerfTable' 
Drive Array Controller Performance Monitor Table.
          
A table of controller entries supporting the performance monitor
information.
cpqDaCntlrPerfEntry row .1.3.6.1.4.1.232.3.2.7.1.1
Drive Array Controller Performance Monitor Entry.

A performance monitor entry.
Indexes
Column Syntax OID
cpqDaCntlrPerfCntlrIndexmandatory
Drive Array Controller Performance Monitor Controller Index.

This maps the performance monitor information into their
respective controllers which support performance data.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.1
cpqDaCntlrPerfInstancemandatory
Drive Array Controller Performance Monitor Instance Index.

This maps the performance monitor information for a specific
controller and sample interval to controllers which support
performance data.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.2
cpqDaCntlrPerfSampleIntervalmandatory
Array Controller Performance Monitor Sample Interval.

This value indicates the length of the performance interval
for this controller and all logical volumes associated with
this controller. This value i…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.3
cpqDaCntlrPerfVersionmandatory
Array Controller Performance Monitor Version.

This value specifies the version of the performance monitor
interface.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.4
cpqDaCntlrPerfCpuPercentBusymandatory
Array Controller Performance Monitor Cpu Percent Busy.

This value specifies the total CPU percent busy as a number
from 0 to 100 inclusive. If the value cannot be determined
or is not applicable, the val…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.5
cpqDaCntlrPerfCommandCountmandatory
Array Controller Performance Monitor Command Count.

This value shows the total number of read and write commands
processed in this sample. This value is expressed in read and
write commands per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.6
cpqDaCntlrPerfAvgLatencymandatory
Array Controller Performance Monitor Average
Command Latency.

This value shows the average command latency for this sample
in 1/100,000 second units.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.7.1.1.7

cpqDaLogDrvPerfTable

table mandatory
.1.3.6.1.4.1.232.3.2.8.1 · 1 row entry · 13 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaLogDrvPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaLogDrvPerfTable' 
Drive Array Logical Drive Performance Monitor Table.
          
A table of logical drive entries supporting the performance
monitor information.
cpqDaLogDrvPerfEntry row .1.3.6.1.4.1.232.3.2.8.1.1
Drive Array Logical Drive Performance Monitor Entry.

A performance monitor entry.
Indexes
Column Syntax OID
cpqDaLogDrvPerfCntlrIndexmandatory
Drive Array Logical Drive Performance Monitor Controller Index.

This maps the performance monitor information into their
respective controllers which support performance data.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.1
cpqDaLogDrvPerfIndexmandatory
Drive Array Logical Drive Performance Monitor Drive Index.

This maps the performance monitor information into their
respective logical drives which support performance data.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.8.1.1.2
cpqDaLogDrvPerfInstancemandatory
Drive Array Logical Drive Performance Monitor Instance Index.

This maps the performance monitor information for a specific
controller, logical drive and sample interval to controllers
which support perfor…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.3
cpqDaLogDrvPerfSampleIntervalmandatory
Array Logical Drive Performance Monitor Sample Interval.

This value indicates the length of the performance interval
for this controller and all logical volumes associated with
this controller. This valu…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.4
cpqDaLogDrvPerfAvgQueueDepthmandatory
Array Logical Drive Performance Monitor Average Queue Depth.

This value indicates the average command queue depth of the
logical volume.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.5
cpqDaLogDrvPerfReadsmandatory
Array Logical Drive Performance Monitor Reads.

This value is the count of read requests for the logical volume
expressed in reads per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.6
cpqDaLogDrvPerfWritesmandatory
Array Logical Drive Performance Monitor Writes.

This value is the count of write requests for the logical volume
expressed in writes per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.7
cpqDaLogDrvPerfTotalIOmandatory
Array Logical Drive Performance Monitor Total I/O.

This value shows the total number of read and write requests
for the logical volume expressed in reads and writes per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.8
cpqDaLogDrvPerfCacheHitsmandatory
Array Logical Drive Performance Monitor Cache Hits.

This value shows the total number of read cache hits for the
logical volume. This value is expressed in cache hits per
second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.9
cpqDaLogDrvPerfCacheMissesmandatory
Array Logical Drive Performance Monitor Cache Misses.

This value shows the total number of read cache misses for the
logical volume. This value is expressed in cache misses per
second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.10
cpqDaLogDrvPerfReadAheadSectorsmandatory
Array Logical Drive Performance Monitor Read Ahead Sectors.

This value shows the total number read ahead sectors pre-fetched
for the logical volume for this interval. This value is expressed
in sectors p…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.11
cpqDaLogDrvPerfSectorsReadmandatory
Array Logical Drive Performance Monitor Sectors Read.

This value shows the number of sectors read for the logical
volume for this interval. This value is expressed in sectors
per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.12
cpqDaLogDrvPerfSectorsWrittenmandatory
Array Logical Drive Performance Monitor Sectors Written.

This value shows the number of sectors written for the logical
volume for this interval. This value is expressed in sectors
per second.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.8.1.1.13

cpqDaTapeDrvTable

table mandatory
.1.3.6.1.4.1.232.3.2.9.1 · 1 row entry · 22 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaTapeDrvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaTapeDrvTable' 
Drive Array Tape Drive Table.
          
A table of tape drive entries.
cpqDaTapeDrvEntry row .1.3.6.1.4.1.232.3.2.9.1.1
Drive Array Tape Drive Entry.

A tape drive entry.
Indexes
Column Syntax OID
cpqDaTapeDrvCntlrIndexmandatory
Drive Array Tape Drive Controller Index.

This index maps the tape drive back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.9.1.1.1
cpqDaTapeDrvBusIndexmandatory
Drive Array Tape Drive SCSI Bus Index.

This is the controller SCSI bus to which the tape drive is
attached.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.9.1.1.2
cpqDaTapeDrvScsiIdIndexmandatory
Drive Array Tape Drive SCSI Index.

This is the SCSI Target Id of the tape drive.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.9.1.1.3
cpqDaTapeDrvLunIndexmandatory
Drive Array Tape Drive Logical Unit Number Index.

This is the logical unit number of the tape drive.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.9.1.1.4
cpqDaTapeDrvNamemandatory
Drive Array Tape Drive Model Name.

This is the model name of the tape drive. It can be used for
identification purposes.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.232.3.2.9.1.1.5
cpqDaTapeDrvSerialNumbermandatory
Drive Array Tape Drive Serial Number.

This is the unit serial number for the tape drive. It can be
used for identification purposes.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.232.3.2.9.1.1.6
cpqDaTapeDrvFwRevmandatory
Drive Array Tape Drive Firmware Revision.

This is firmware revision level of the tape drive. It can be
used for identification purposes.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.3.2.9.1.1.7
cpqDaTapeDrvStatusmandatory
Drive Array Tape Drive Status.

The tape drive can be in one of the following states:

other(1)
The tape drive is in a state other than one of those listed
below.

ok(2)
I…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.8
cpqDaTapeDrvConditionmandatory
Drive Array Tape Drive Condition.

This value represents the overall condition of the tape drive.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.9.1.1.9
cpqDaTapeDrvFwSubtypemandatory
Drive Array Tape Drive Firmware Subtype.

This is used to differentiate the firmware versions
which have the same tape drive type (as specified by
cpqDaTapeDrvType). Tape drives will contain a value
of 1 …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.9.1.1.10
cpqDaTapeDrvTypemandatory
Drive Array Tape Drive Type.

This is the drives model, and can be used for identification
purposes. The following values are defined:

other(1)
The management agent does not recognize th…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.11
cpqDaTapeDrvCleanReqmandatory
Drive Array Tape Drive Cleaning Required.

This is an indication of whether the tape drive heads
require a cleaning session to occur. If this variable
indicates a need to clean the tape heads, then a clea…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.12
cpqDaTapeDrvCleanTapeReplmandatory
Drive Array Tape Drive Cleaning Tape Replacement.

This variable is only applicable to autoloader tape drives.
This variable indicates whether the cleaning tape which is
inserted in an autoloader needs to …
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.13
cpqDaTapeDrvCleanTapeCountmandatory
Drive Array Tape Drive Cleaning Tape Count.

This variable is a count from a tape drive of the number of
cleanings done by the tape cleaner last in the drive.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.9.1.1.14
cpqDaTapeDrvLibraryDrivemandatory
Drive Array Tape Drive Library Drive.

This variable indicates whether or not the tape drive is part
of a tape library. It can be in one of the following states:

other(1)
Indicates that th…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.15
cpqDaTapeDrvMagSizemandatory
Tape Physical Drive Magazine Size.

This variable indicates the number of tape slots available in
the tape autoloader magazine cartridge that is currently loaded
into the tape drive.

For non…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.9.1.1.16
cpqDaTapeDrvHotPlugmandatory
Drive Array Tape Drive Hot Plug Support Status.

The following values are defined:

other(1)
The agent is unable to determine if this drive
supports hot plug replacement.

h…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.17
cpqDaTapeDrvPlacementmandatory
Drive Array Tape Drive Placement.

The following values are defined:

other(1)
The agent is unable to determine if the tape drive is
internal or external to the system chassis.
…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.18
cpqDaTapeDrvCurrentWidthmandatory
Drive Array Tape Drive Current Width.

The following values are defined:

other(1)
The agent is unable to determine the current negotiated data
transfer width for this drive.
…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.19
cpqDaTapeDrvCurrentSpeedmandatory
Drive Array Tape Drive Current Data Transfer Speed.

The following values are defined:

other(1)
The agent is unable to determine the current negotiated data
transfer speed for this drive…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.20
cpqDaTapeDrvProtocolmandatory
Drive Array Tape Drive Protocol.

The following values are defined:

other(1)
The agent is unable to determine the protocol for this drive.

parallelScsi(2)
The drive protoc…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.21
cpqDaTapeDrvNegotiatedLinkRatemandatory
Drive Array Tape Drive Negotiated Link Rate.

The following values are defined:

other(1)
The agent is unable to determine the negotiated link rate
this drive.

rate-1-5(2)
…
Enumeration .1.3.6.1.4.1.232.3.2.9.1.1.22

cpqDaTapeCountersTable

table mandatory
.1.3.6.1.4.1.232.3.2.10.1 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaTapeCountersTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaTapeCountersTable' 
Drive Array Tape Counters Table.
cpqDaTapeCountersEntry row .1.3.6.1.4.1.232.3.2.10.1.1
Drive Array Tape Counters Entry.
Indexes
Column Syntax OID
cpqDaTapeCountersCntlrIndexmandatory
Drive Array Tape Counters Controller Index.

This index maps the tape drive back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.10.1.1.1
cpqDaTapeCountersBusIndexmandatory
Drive Array Tape Counters Scsi Bus Index.

This is the controller SCSI bus to which the tape drive is
attached.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.10.1.1.2
cpqDaTapeCountersScsiIdIndexmandatory
Drive Array Tape Counters SCSI Index.

This is the SCSI Target Id of the tape drive.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.10.1.1.3
cpqDaTapeCountersLunIndexmandatory
Drive Array Tape Counters Logical Unit Number Index.

This is the logical unit number of the tape drive.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.10.1.1.4
cpqDaTapeCountersReWritesmandatory
Tape Device Re-write count.

This is the number of times blocks had to be re-written to the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.

Re-write er…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.10.1.1.5
cpqDaTapeCountersReReadsmandatory
Tape Device Re-read count.

This is the number of times blocks had to be re-read from the
device. This value is maintained since the Tape Hardware Interface
driver was loaded.

Re-read error…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.10.1.1.6
cpqDaTapeCountersTotalErrorsmandatory
Tape Device Total Errors.

This is the total number of read/write errors encountered.
This value is maintained since the Tape Hardware Interface
driver was loaded.

Errors may occasionally oc…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.10.1.1.7
cpqDaTapeCountersTotalUncorrectablemandatory
Tape Device Total Uncorrectable Errors.

This is the total number of read and write errors which could not
be corrected. This value is maintained since the Tape Hardware
Interface driver was loaded.
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.10.1.1.8
cpqDaTapeCountersTotalBytesmandatory
Tape Device Total Bytes.

This is the number total number of bytes read/written to the tape
currently installed in the device. This value is reset whenever
a new tape is inserted into the device.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.10.1.1.9

cpqDaTapeLibraryTable

table mandatory
.1.3.6.1.4.1.232.3.2.11.1 · 1 row entry · 20 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaTapeLibraryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaTapeLibraryTable' 
Drive Array Tape Library Table.
cpqDaTapeLibraryEntry row .1.3.6.1.4.1.232.3.2.11.1.1
Drive Array Tape Library Entry.
Indexes
Column Syntax OID
cpqDaTapeLibraryCntlrIndexmandatory
Drive Array Tape Library Controller Index.

This index maps the tape library back to the controller to which
it is attached. The value of this index is the same as the one
used under the controller group.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.11.1.1.1
cpqDaTapeLibraryScsiBusmandatory
Drive Array Tape Library Scsi Bus.

The bus index indicates to which SCSI bus instance on a
controller this table entry belongs. The instances start
at one and increment for each SCSI bus on a controller.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.11.1.1.2
cpqDaTapeLibraryScsiTargetmandatory
Drive Array Tape Library Scsi Target.

The target index indicates to which SCSI ID on a controller
SCSI bus this table entry belongs.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.11.1.1.3
cpqDaTapeLibraryScsiLunmandatory
Drive Array Tape Library Scsi Lun.

The Lun index indicates to which logical unit on a SCSI ID on a
controller SCSI bus this table entry belongs.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.11.1.1.4
cpqDaTapeLibrarySerialNumbermandatory
Drive Array Tape Library Serial Number.

This is the unit serial number for the tape library. It can be
used for identification purposes.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.232.3.2.11.1.1.5
cpqDaTapeLibraryModelmandatory
Drive Array Tape Library Model.

This is the model name of the tape library. It can be used for
identification purposes.
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.232.3.2.11.1.1.6
cpqDaTapeLibraryFWRevmandatory
Drive Array Tape Library Serial Number.

This is firmware revision level of the tape library. It can be
used for identification purposes.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.232.3.2.11.1.1.7
cpqDaTapeLibraryStatusmandatory
Drive Array Tape Library Status.

The library can be in one of the following states:

other(1)
The library is in a state other than one of those listed
below.

ok(2)
Indic…
Enumeration .1.3.6.1.4.1.232.3.2.11.1.1.8
cpqDaTapeLibraryDoorStatusmandatory
Drive Array Tape Library Door Status.

The door can be in one of the following states:

other(1)
The door is in a state other than one of those listed
below.

notSupported(2…
Enumeration .1.3.6.1.4.1.232.3.2.11.1.1.9
cpqDaTapeLibraryConditionmandatory
Drive Array Tape Library Condition.

This value represents the overall condition of the tape
library.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.11.1.1.10
cpqDaTapeLibraryOverallConditionmandatory
Drive Array Tape Library Overall Condition.

This value represents the overall condition of the tape library
and any associated tape drives.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.232.3.2.11.1.1.11
cpqDaTapeLibraryLastErrorobsolete
Drive Array Tape Library Last Error.

This is the last error returned by the tape library.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.232.3.2.11.1.1.12
cpqDaTapeLibraryStatHoursmandatory
Drive Array Tape Library Stat Hours.

This is the number of hours of operation for the library.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.11.1.1.13
cpqDaTapeLibraryStatMovesmandatory
Drive Array Tape Library Stat Moves.

This is the number of tape moves for the library loader arm.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.232.3.2.11.1.1.14
cpqDaTapeLibraryDriveListobsolete
Drive Array Tape Library Tape Drive List.

This is a data structure containing the list of tape drive ids
that are present in this library. The format is:

field octets contents
===== …
OctetString
Constraints:
range: 0-60
 .1.3.6.1.4.1.232.3.2.11.1.1.15
cpqDaTapeLibraryCurrentWidthmandatory
Drive Array Tape Library Current Width.

The following values are defined:

other(1)
The agent is unable to determine the current negotiated data
transfer width for this library.
…
Enumeration .1.3.6.1.4.1.232.3.2.11.1.1.16
cpqDaTapeLibraryCurrentSpeedmandatory
Drive Array Tape Library Current Data Transfer Speed.

The following values are defined:

other(1)
The agent is unable to determine the current negotiated data
transfer speed for this lib…
Enumeration .1.3.6.1.4.1.232.3.2.11.1.1.17
cpqDaTapeLibraryDriveList2mandatory
Drive Array Tape Library Tape Drive List 2.

This is a data structure containing the list of tape drive ids
that are present in this library. The format is:

field octets contents
====…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.232.3.2.11.1.1.18
cpqDaTapeLibraryProtocolmandatory
Drive Array Tape Library Protocol.

The following values are defined:

other(1)
The agent is unable to determine the protocol for this library.

parallelScsi(2)
The library …
Enumeration .1.3.6.1.4.1.232.3.2.11.1.1.19
cpqDaTapeLibraryNegotiatedLinkRatemandatory
Drive Array Tape Library Negotiated Link Rate.

The following values are defined:

other(1)
The agent is unable to determine the negotiated link rate
for this library.

rate…
Enumeration .1.3.6.1.4.1.232.3.2.11.1.1.20

cpqDaTrapLogTable

table obsolete
.1.3.6.1.4.1.232.3.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cpqDaTrapLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CPQIDA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CPQIDA-MIB::cpqDaTrapLogTable' 
An ordered list of trap log entries (conceptually a queue).
          
The trap log entries will be kept in the order in which they
were generated with the most recent trap at index 1 and the
oldest trap entry at index trapLogMaxSize.  If the maximum
number size has been reached and a new trap occurs the oldest
trap will be removed when the new trap is added so the
trapMaxLogSize is not exceeded.
cpqDaTrapLogEntry row .1.3.6.1.4.1.232.3.3.3.1
A description of a trap event.
Indexes
Column Syntax OID
cpqDaTrapLogIndexobsolete
This value uniquely identifies this trapLogEntry at this time.

The most recent trap will have an index of 1 and the oldest
trap will have an index of trapLogMaxSize. Because of the
queue-like nature of t…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.232.3.3.3.1.1
cpqDaTrapTypeobsolete
The type of the trap event that this entry describes.

This number refers to an entry in a list of traps enumerating
the possible traps the Drive Array agent may issue.
Enumeration .1.3.6.1.4.1.232.3.3.3.1.2
cpqDaTrapTimeobsolete
The time of the trap event that this entry describes.

The time is given in year (first octet), month, day of month,
hour, minute, second (last octet) order. Each octet gives
the value in BCD.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.232.3.3.3.1.3