CISCO-STACK-MIB Table View

The fddi ring map table. This table lists the
nodes in the FDDI ring(s) to which the system
belongs.

sysFddiRingEntry row .1.3.6.1.4.1.9.5.1.1.14.1

A FDDI Ring table entry.

Indexes

sysFddiRingSMTIndex sysFddiRingAddress

Column	Syntax	OID
sysFddiRingSMTIndex The value of the SMT index associated with this ring.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.5.1.1.14.1.1
sysFddiRingAddress The MAC address of this node in the FDDI ring.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.5.1.1.14.1.2
sysFddiRingNext The MAC address of the next node in the FDDI ring.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.5.1.1.14.1.3

The system traffic meter table. This table
lists the traffic meters available in the
system.

sysTrafficMeterEntry row .1.3.6.1.4.1.9.5.1.1.32.1

A traffic meter table entry.

Indexes

sysTrafficMeterType

Column	Syntax	OID
sysTrafficMeterType The type of traffic meter.	Enumeration Enumerated Values: 1 systemSwitchingBus 2 switchingBusA 3 switchingBusB 4 switchingBusC	.1.3.6.1.4.1.9.5.1.1.32.1.1
sysTrafficMeter Traffic meter value, i.e. the percentage of bandwidth utilization for the previous polling interval.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.9.5.1.1.32.1.2
sysTrafficMeterPeak Peak traffic meter value since the system started.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.9.5.1.1.32.1.3
sysTrafficMeterPeakTime The time (in hundredths of a second) since the peak traffic meter value occurred.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.1.32.1.4

A list of module entries. The number of entries
is the number of modules in the chassis.

moduleEntry row .1.3.6.1.4.1.9.5.1.3.1.1

Entry containing information about one module in
the chassis.

Indexes

moduleIndex

Column	Syntax	OID
moduleIndex A unique value for each module within the chassis.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.3.1.1.1
moduleType The type of module.	Enumeration Enumerated Values: 1 other 2 empty 3 wsc1000 4 wsc1001 5 wsc1100 11 wsc1200 12 wsc1400 13 wsx1441 14 wsx1444 15 wsx1450 16 wsx1483 17 wsx1454 18 wsx1455 19 wsx1431 20 wsx1465 21 wsx1436 22 wsx1434 23 wsx5009 24 wsx5013 25 wsx5011 26 wsx5010 27 wsx5113 28 wsx5101 29 wsx5103 30 wsx5104 32 wsx5155 33 wsx5154 34 wsx5153 35 wsx5111 36 wsx5213 37 wsx5020 38 wsx5006 39 wsx5005 40 wsx5509 41 wsx5506 42 wsx5505 43 wsx5156 44 wsx5157 45 wsx5158 46 wsx5030 47 wsx5114 48 wsx5223 49 wsx5224 50 wsx5012 52 wsx5302 53 wsx5213a 54 wsx5380 55 wsx5201 56 wsx5203 57 wsx5530 61 wsx5161 62 wsx5162 65 wsx5165 66 wsx5166 67 wsx5031 68 wsx5410 69 wsx5403 73 wsx5201r 74 wsx5225r 75 wsx5014 76 wsx5015 77 wsx5236 78 wsx5540 79 wsx5234 81 wsx5012a 82 wsx5167 83 wsx5239 84 wsx5168 85 wsx5305 87 wsx5550 88 wsf5541 91 wsx5534 92 wsx5536 96 wsx5237 200 wsx6ksup12ge 201 wsx6408gbic 202 wsx6224mmmt 203 wsx6248rj45 204 wsx6248tel 206 wsx6302msm 207 wsf6kmsfc 208 wsx6024flmt 209 wsx6101oc12mmf 210 wsx6101oc12smf 211 wsx6416gemt 212 wsx61822pa 213 osm2oc12AtmMM 214 osm2oc12AtmSI 216 osm4oc12PosMM 217 osm4oc12PosSI 218 osm4oc12PosSL 219 wsx6ksup1a2ge 220 wsx6302amsm 221 wsx6416gbic 222 wsx6224ammmt 223 wsx6380nam 224 wsx6248arj45 225 wsx6248atel 226 wsx6408agbic 229 wsx6608t1 230 wsx6608e1 231 wsx6624fxs 233 wsx6316getx 234 wsf6kmsfc2 235 wsx6324mmmt 236 wsx6348rj45 237 wsx6ksup22ge 238 wsx6324sm 239 wsx6516gbic 240 osm4geWanGbic 241 osm1oc48PosSS 242 osm1oc48PosSI 243 osm1oc48PosSL 244 wsx6381ids 245 wsc6500sfm 246 osm16oc3PosMM 247 osm16oc3PosSI 248 osm16oc3PosSL 249 osm2oc12PosMM 250 osm2oc12PosSI 251 osm2oc12PosSL 252 wsx650210ge 253 osm8oc3PosMM 254 osm8oc3PosSI 255 osm8oc3PosSL 258 wsx6548rj45 259 wsx6524mmmt 260 wsx6066SlbApc 261 wsx6516getx 265 osm2oc48OneDptSS 266 osm2oc48OneDptSI 267 osm2oc48OneDptSL 268 osm2oc48OneDptSSDual 269 osm2oc48OneDptSIDual 270 osm2oc48OneDptSLDual 271 wsx6816gbic 272 osm4choc12T3MM 273 osm4choc12T3SI 274 osm8choc12T3MM 275 osm8choc12T3SI 276 osm1choc48T3SS 277 osm2choc48T3SS 278 wsx6500sfm2 279 osm1choc48T3SI 280 osm2choc48T3SI 281 wsx6348rj21 282 wsx6548rj21 284 wsSvcCmm 285 wsx650110gex4 286 osm4oc3PosSI 289 osm4oc3PosMM 290 wsSvcIdsm2 291 wsSvcNam2 292 wsSvcFwm1 293 wsSvcCe1 294 wsSvcSsl1 295 osm8choc3DS0SI 296 osm4choc3DS0SI 297 osm1choc12T1SI 300 wsx4012 301 wsx4148rj 302 wsx4232gbrj 303 wsx4306gb 304 wsx4418gb 305 wsx44162gbtx 306 wsx4912gb 307 wsx2948gbrj 309 wsx2948 310 wsx4912 311 wsx4424sxmt 312 wsx4232rjxx 313 wsx4148rj21 317 wsx4124fxmt 318 wsx4013 319 wsx4232l3 320 wsx4604gwy 321 wsx44122Gbtx 322 wsx2980 323 wsx2980rj 324 wsx2980gbrj 325 wsx4019 326 wsx4148rj45v 330 wsx4424gbrj45 331 wsx4148fxmt 332 wsx4448gblx 334 wsx4448gbrj45 337 wsx4148lxmt 339 wsx4548gbrj45 340 wsx4548gbrj45v 341 wsx4248rj21v 342 wsx4302gb 343 wsx4248rj45v 345 wsx2948ggetx 346 wsx2948ggetxgbrj 502 wsx6516aGbic 503 wsx6148getx 506 wsx6148x2rj45 507 wsx6196rj21 509 wssup32ge3b 510 wssup3210ge3b 511 mec6524gs8s 512 mec6524gt8s 515 wssup32pge 516 wssup32p10ge 597 wssvcpisa32 598 me6524msfc2a 599 wsf6kmsfc2a 600 osm12ct3T1 601 osm12t3e3 602 osm24t3e3 603 osm4GeWanGbicPlus 604 osm1choc12T3SI 605 osm2choc12T3SI 606 osm2oc12AtmMMPlus 607 osm2oc12AtmSIPlus 608 osm2oc12PosMMPlus 609 osm2oc12PosSIPlus 610 osm16oc3PosSIPlus 611 osm1oc48PosSSPlus 612 osm1oc48PosSIPlus 613 osm1oc48PosSLPlus 614 osm4oc3PosSIPlus 615 osm8oc3PosSLPlus 616 osm8oc3PosSIPlus 617 osm4oc12PosSIPlus 618 c7600Es4Tg3cxl 620 c7600Es2Tg3cxl 625 c76EsXt4Tg3cxl 626 c76EsXt2Tg3cxl 627 c7600Es4Tg3c 629 c7600Es2Tg3c 633 c76EsXt4Tg3c 634 c76EsXt2Tg3c 903 wsSvcIpSec1 910 wsSvcMwam1 911 wsSvcCsg1 912 wsx6148rj45v 913 wsx6148rj21v 914 wsSvcNam1 915 wsx6548getx 919 wsSvcPsd1 920 wsx6066SlbSk9 921 wsx6148agetx 923 wsx6148arj45 924 wsSvcWlan1k9 925 wsSvcAon1k9 926 ace106500k9 927 wsSvcWebVpnk9 928 wsx6148FeSfp 929 wsSvcAdm1k9 930 wsSvcAgm1k9 936 ace046500k9 940 wsSvcSamiBb 946 wsSvcWism2k9 947 wsSvcAsaSm1 949 wsSvcNam3k9 950 wsSvcAsaSm1k7 951 wsSvcVse1k9 1001 wssup720 1002 wssup720base 1004 m7600Sip600 1007 wsx6748getx 1008 wsx670410ge 1009 wsx6748sfp 1010 wsx6724sfp 1016 wsx670810ge 1021 vss72010g 1023 wsx6708a10ge 1027 wsx671610ge 1031 vssup2t10g 1032 wsx6148ege45at 1033 wsx671610t 1034 wsx690810g 1035 wsx690440g 1036 wsx6148egetx 1037 wsx6848tx 1039 wsx6848sfp 1040 wsx6824sfp 1042 wsx681610ge 1043 wsx681610t 1101 wsx65822pa 1102 m7600Sip200 1103 m7600Sip400 1104 c7600ssc400 1105 c7600ssc600 1106 esm2x10ge 1301 c6800ia48td 1304 c6800ia48fpd 1400 c6880x16p10g 1401 c6880x 1402 c6880xle16p10g 1403 c6880xle 1800 rsp720 1801 rsp720base 1805 c7600msfc4	.1.3.6.1.4.1.9.5.1.3.1.1.2
moduleSerialNumberdeprecated The serial number of the module in a numeric format. If the module uses an alphanumeric serial number, this MIB object will return 0. This object is deprecated and replaced by entPhysicalSerialNum in ENTI…	Integer32 Constraints: range: 0-999999999	.1.3.6.1.4.1.9.5.1.3.1.1.3
moduleHwHiVersiondeprecated The high part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwHiVersion is 3. This object is deprecated and replaced by entPhysicalHardwareRev in E…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.4
moduleHwLoVersiondeprecated The low part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwLoVersion is 1. This object is deprecated and replaced by entPhysicalHardwareRev in EN…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.5
moduleFwHiVersiondeprecated The high part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwHiVersion is 3. This object is deprecated and replaced by entPhysicalFirmwareRev in ENTITY-M…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.6
moduleFwLoVersiondeprecated The low part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwLoVersion is 1. This object is deprecated and replaced by entPhysicalFirmwareRev in ENTITY-MI…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.7
moduleSwHiVersiondeprecated The high part of the software version number. For example, if the software version is 3.1, the value of moduleSwHiVersion is 3. This object is deprecated and replaced by entPhysicalSoftwareRev in ENTITY-M…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.8
moduleSwLoVersiondeprecated The low part of the software version number. For example, if the software version is 3.1, the value of moduleSwLoVersion is 1. This object is deprecated and replaced by entPhysicalSoftwareRev in ENTITY-MI…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.9
moduleStatus The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure condition(s).	Enumeration Enumerated Values: 1 other 2 ok 3 minorFault 4 majorFault	.1.3.6.1.4.1.9.5.1.3.1.1.10
moduleTestResult The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error conditions.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.3.1.1.11
moduleAction This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module currently disabled Setting this object to one of t…	Enumerationr/w Enumerated Values: 1 other 2 reset 3 enable 4 disable	.1.3.6.1.4.1.9.5.1.3.1.1.12
moduleName A descriptive string used by the network administrator to name the module.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.9.5.1.3.1.1.13
moduleNumPorts The number of ports supported by the module.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.5.1.3.1.1.14
modulePortStatus A series of bytes containing status information about the module and each of the ports on the module. The first byte contains the status for the module (same value as moduleStatus), and subsequent bytes contain status f…	OctetString	.1.3.6.1.4.1.9.5.1.3.1.1.15
moduleSubType The type of daughterboard attached to this module.	Enumeration Enumerated Values: 1 other 2 empty 3 wsf5510 4 wsf5511 6 wsx5304 7 wsf5520 8 wsf5521 9 wsf5531 100 wsf6020 101 wsf6020a 102 wsf6kpfc 103 wsf6kpfc2 104 wsf6kvpwr 105 wsf6kdfc 106 wsf6kpfc2a 107 wsf6kdfca 200 vsp300dfc 201 wsf6kpfc3a 202 wsf6kdfc3a 203 wsf6700dfc3a 205 wsf6kdfc3bxl 206 wsf6kpfc3bxl 207 wsf6700dfc3bxl 208 wsf6700cfc 213 m7600pfc3c 216 wsf6kpfc3b 217 wsf6700dfc3b 218 wsf6700dfc3c 221 wsf6700dfc3cxl 223 wsf6kdfc3b 224 mec6524pfc3c 225 sip600earl 226 vsf6kpfc3cxl 227 vsf6kpfc3c 228 c7600esmdfc3cxl 229 vsf6kpfc4 230 c7600esmdfc3c 231 wsf6kdfc4exl 232 c7600Es3cxl 233 c7600Es3c 234 wsf6kdfc4e 235 vsf6kpfc4xl 236 wsf6kdfc4axl 237 wsf6kdfc4a 238 c6880xpfc 239 c6880xlepfc 240 c6880xdfc 241 c6880xledfc	.1.3.6.1.4.1.9.5.1.3.1.1.16
moduleModel The manufacturer's model number for the module.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.9.5.1.3.1.1.17
moduleHwVersion The hardware version of the module.	OctetString Constraints: range: 0-12	.1.3.6.1.4.1.9.5.1.3.1.1.18
moduleFwVersion The firmware version of the module.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.9.5.1.3.1.1.19
moduleSwVersion The software version of the module.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.9.5.1.3.1.1.20
moduleStandbyStatus Redundant status of a module that supports redundancy.	Enumeration Enumerated Values: 1 other 2 active 3 standby 4 error	.1.3.6.1.4.1.9.5.1.3.1.1.21
moduleIPAddress If the module has a separate IP address to reach it by, then it is reported here. Otherwise, this object has a value of '00000000H'.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.3.1.1.22
moduleIPAddressVlan If the moduleIPAddress is valid then this object reports the VLAN to access that IP address on. Otherwise this object has a value of zero.	CISCO-VTP-MIBVlanIndex Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.5.1.3.1.1.23
moduleSubType2 The type of daughterboard attached to this module.	Enumeration Enumerated Values: 1 other 2 empty 3 wsu5531 5 wsu5533 6 wsu5534 7 wsu5535 8 wsu5536 9 wsu5537 10 wsu5538 11 wsu5539 102 wsg6488 103 wsg6489 104 wsg6483 105 wsg6485 106 wsf6kFe48af 107 wsf6kGe48af 108 wsf6kVpwrGe 109 wsf6kFe48x2af 207 wsf6kmsfc 234 wsf6kmsfc2 314 wsu4504fxmt 315 wsu4502gb 402 wssvcidsupg 403 wssvccmm6e1 404 wssvccmm6t1 405 wssvccmm24fxs 406 wssvccmmact 410 aceModExpnDc 411 wsSvcAppProc1 597 wssvcpisa32 598 me6524msfc2a 599 wsf6kmsfc2a 618 c7600Es4Tg 620 c7600Es2Tg 625 c7600EsItu4TgLk 626 c7600EsItu2TgLk 1001 wssup720 1005 vsf6kmsfc5 1026 vsf6kmsfc3 1701 esm2x10ge 1805 c7600msfc4	.1.3.6.1.4.1.9.5.1.3.1.1.24
moduleSlotNum This value is determined by the chassis slot number where the module is located. Valid entries are 1 to the value of chassisNumSlots	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.3.1.1.25
moduleSerialNumberString The serial number of the module. This MIB object will return the module serial number for any module that either a numeric or an alphanumeric serial number is being used.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.9.5.1.3.1.1.26
moduleEntPhysicalIndex The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this module.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.5.1.3.1.1.27
moduleAdditionalStatus The additional status of the module. fruInstalled(0) indicates that whether or not FRU is installed on the module. powerDenied(1) indicates that whether phones connected to the ports of thi…	Bits Enumerated Values: 0 fruInstalled 1 powerDenied 2 faulty	.1.3.6.1.4.1.9.5.1.3.1.1.28

A list of port entries. The number of entries is
determined by the number of modules in the chassis
and the number of ports on each module.

portEntry row .1.3.6.1.4.1.9.5.1.4.1.1

Entry containing information for a particular
port on a module.

Indexes

portModuleIndex portIndex

Column	Syntax	OID
portModuleIndex An index value that uniquely identifies the module where this port is located.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.4.1.1.1
portIndex An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.4.1.1.2
portCrossIndex A cross-reference to the port's index within another mib group. The value is dependent on the type of port. For an FDDI port, this corresponds to the snmpFddiPORTIndex.	Integer32 Constraints: range: 1-4080	.1.3.6.1.4.1.9.5.1.4.1.1.3
portName A descriptive string used by the network administrator to name the port.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.9.5.1.4.1.1.4
portType The type of physical layer medium dependent interface on the port.	Enumeration Enumerated Values: 1 other 2 cddi 3 fddi 4 tppmd 5 mlt3 6 sddi 7 smf 8 e10BaseT 9 e10BaseF 10 scf 11 e100BaseTX 12 e100BaseT4 13 e100BaseF 14 atmOc3mmf 15 atmOc3smf 16 atmOc3utp 17 e100BaseFsm 18 e10a100BaseTX 19 mii 20 vlanRouter 21 remoteRouter 22 tokenring 23 atmOc12mmf 24 atmOc12smf 25 atmDs3 26 tokenringMmf 27 e1000BaseLX 28 e1000BaseSX 29 e1000BaseCX 30 networkAnalysis 31 e1000Empty 32 e1000BaseLH 33 e1000BaseT 34 e1000UnsupportedGbic 35 e1000BaseZX 36 depi2 37 t1 38 e1 39 fxs 40 fxo 41 transcoding 42 conferencing 43 atmOc12mm 44 atmOc12smi 45 atmOc12sml 46 posOc12mm 47 posOc12smi 48 posOc12sml 49 posOc48sms 50 posOc48smi 51 posOc48sml 52 posOc3mm 53 posOc3smi 54 posOc3sml 55 intrusionDetect 56 e10GBaseCPX 57 e10GBaseLX4 59 e10GBaseEX4 60 e10GEmpty 61 e10a100a1000BaseT 62 dptOc48mm 63 dptOc48smi 64 dptOc48sml 65 e10GBaseLR 66 chOc12smi 67 chOc12mm 68 chOc48ss 69 chOc48smi 70 e10GBaseSX4 71 e10GBaseER 72 contentEngine 73 ssl 74 firewall 75 vpnIpSec 76 ct3 77 e1000BaseCwdm1470 78 e1000BaseCwdm1490 79 e1000BaseCwdm1510 80 e1000BaseCwdm1530 81 e1000BaseCwdm1550 82 e1000BaseCwdm1570 83 e1000BaseCwdm1590 84 e1000BaseCwdm1610 85 e1000BaseBT 86 e1000BaseUnapproved 87 chOc3smi 88 mcr 89 coe 90 mwa 91 psd 92 e100BaseLX 93 e10GBaseSR 94 e10GBaseCX4 95 e10GBaseWdm1550 96 e10GBaseEdc1310 97 e10GBaseSW 98 e10GBaseLW 99 e10GBaseEW 100 lwa 101 aons 102 sslVpn 103 e100BaseEmpty 104 adsm 105 agsm 106 aces 109 intrusionProtect 110 e1000BaseSvc 111 e10GBaseSvc 113 e40GBaseEmpty 1000 e1000BaseUnknown 1001 e10GBaseUnknown 1002 e10GBaseUnapproved 1003 e1000BaseWdmRxOnly 1004 e1000BaseDwdm3033 1005 e1000BaseDwdm3112 1006 e1000BaseDwdm3190 1007 e1000BaseDwdm3268 1008 e1000BaseDwdm3425 1009 e1000BaseDwdm3504 1010 e1000BaseDwdm3582 1011 e1000BaseDwdm3661 1012 e1000BaseDwdm3819 1013 e1000BaseDwdm3898 1014 e1000BaseDwdm3977 1015 e1000BaseDwdm4056 1016 e1000BaseDwdm4214 1017 e1000BaseDwdm4294 1018 e1000BaseDwdm4373 1019 e1000BaseDwdm4453 1020 e1000BaseDwdm4612 1021 e1000BaseDwdm4692 1022 e1000BaseDwdm4772 1023 e1000BaseDwdm4851 1024 e1000BaseDwdm5012 1025 e1000BaseDwdm5092 1026 e1000BaseDwdm5172 1027 e1000BaseDwdm5252 1028 e1000BaseDwdm5413 1029 e1000BaseDwdm5494 1030 e1000BaseDwdm5575 1031 e1000BaseDwdm5655 1032 e1000BaseDwdm5817 1033 e1000BaseDwdm5898 1034 e1000BaseDwdm5979 1035 e1000BaseDwdm6061 1036 e10GBaseWdmRxOnly 1037 e10GBaseDwdm3033 1038 e10GBaseDwdm3112 1039 e10GBaseDwdm3190 1040 e10GBaseDwdm3268 1041 e10GBaseDwdm3425 1042 e10GBaseDwdm3504 1043 e10GBaseDwdm3582 1044 e10GBaseDwdm3661 1045 e10GBaseDwdm3819 1046 e10GBaseDwdm3898 1047 e10GBaseDwdm3977 1048 e10GBaseDwdm4056 1049 e10GBaseDwdm4214 1050 e10GBaseDwdm4294 1051 e10GBaseDwdm4373 1052 e10GBaseDwdm4453 1053 e10GBaseDwdm4612 1054 e10GBaseDwdm4692 1055 e10GBaseDwdm4772 1056 e10GBaseDwdm4851 1057 e10GBaseDwdm5012 1058 e10GBaseDwdm5092 1059 e10GBaseDwdm5172 1060 e10GBaseDwdm5252 1061 e10GBaseDwdm5413 1062 e10GBaseDwdm5494 1063 e10GBaseDwdm5575 1064 e10GBaseDwdm5655 1065 e10GBaseDwdm5817 1066 e10GBaseDwdm5898 1067 e10GBaseDwdm5979 1068 e10GBaseDwdm6061 1069 e1000BaseBX10D 1070 e1000BaseBX10U 1071 e100BaseUnknown 1072 e100BaseUnapproved 1073 e100BaseSX 1074 e100BaseBX10D 1075 e100BaseBX10U 1076 e10GBaseBad 1077 e10GBaseZR 1078 e100BaseEX 1079 e100BaseZX 1080 e10GBaseLRM 1081 e10GBaseTPluggable 1082 e10GBaseCU1M 1083 e10GBaseCU3M 1084 e10GBaseCU5M 1085 e10GBaseCU7M 1086 e10GBaseCUdot3M 1087 e10GBaseCU2M 1088 e10GBaseCU4M 1089 e10GBaseCU6M 1090 e10GBaseUSR 1091 e10GBaseLRMSM 1092 e1000BaseDwdm3346 1093 e1000BaseDwdm3739 1094 e1000BaseDwdm4134 1095 e1000BaseDwdm4532 1096 e1000BaseDwdm4931 1097 e1000BaseDwdm5332 1098 e1000BaseDwdm5736 1099 e1000BaseDwdm6141 1100 e40GBaseLR 1101 e40GBaseSR 1102 e40GBaseUnapproved 1104 e10GBaseDwdm3347 1105 e10GBaseDwdm3740 1106 e10GBaseDwdm4135 1107 e10GBaseDwdm4532 1108 e10GBaseDwdm4932 1109 e10GBaseDwdm5333 1110 e10GBaseDwdm5736 1111 e10GBaseDwdm6141 1112 e10GBaseACU7M 1113 e10GBaseACU10M 1114 e1000BaseEXSMD 1115 e1000BaseZXSMD 1116 e1000BaseTE 1117 e1000BaseSXMMD 1118 e1000BaseLHSMD 1119 e100BaseFXGE	.1.3.6.1.4.1.9.5.1.4.1.1.5
portOperStatus The current operational status of the port.	Enumeration Enumerated Values: 1 other 2 ok 3 minorFault 4 majorFault	.1.3.6.1.4.1.9.5.1.4.1.1.6
portCrossGroupIndex A cross-reference to another mib group for this port. The value is dependent on the type of port. For an FDDI port this corresponds to the snmpFddiPORTSMTIndex.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.4.1.1.7
portAdditionalStatus Additional status information for the port. The value is a sum. It initially takes the value zero, then for each state that is true, 2 raised to a power is added to the sum. The powers are according to the following tab…	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.9.5.1.4.1.1.8
portAdminSpeed The desired speed of the port. The current operational speed of the port can be determined from ifSpeed.	Enumerationr/w Enumerated Values: 1 autoDetect 2 autoDetect10100 10 s10G 64000 s64000 1544000 s1544000 2000000 s2000000 2048000 s2048000 4000000 s4000000 10000000 s10000000 16000000 s16000000 45000000 s45000000 64000000 s64000000 100000000 s100000000 155000000 s155000000 400000000 s400000000 622000000 s622000000 1000000000 s1000000000	.1.3.6.1.4.1.9.5.1.4.1.1.9
portDuplex Indicates whether the port is operating in half- duplex, full-duplex, disagree or auto negotiation mode. If the port could not agree with the far end on port duplex, the port will be in disagree(3) mode.	Enumerationr/w Enumerated Values: 1 half 2 full 3 disagree 4 auto	.1.3.6.1.4.1.9.5.1.4.1.1.10
portIfIndex The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.5.1.4.1.1.11
portSpantreeFastStartdeprecated Indicates whether the port is operating in spantree fast start mode. A port with fast start enabled is immediately put in spanning tree forwarding state on link up, rather than starting in blocking state which is the no…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.5.1.4.1.1.12
portAdminRxFlowControl Indicates the receive flow control administrative status set on the port. If the status is set to on(1), the port will require the far end to send flow control. If the status is set to off(2), the port will not allow fa…	Enumerationr/w Enumerated Values: 1 on 2 off 3 desired	.1.3.6.1.4.1.9.5.1.4.1.1.13
portOperRxFlowControl Indicates the receive flow control operational status of the port. If the port could not agree with the far end on a link protocol, its operational status will be disagree(3).	Enumeration Enumerated Values: 1 on 2 off 3 disagree	.1.3.6.1.4.1.9.5.1.4.1.1.14
portAdminTxFlowControl Indicates the transmit flow control administrative status set on the port. If the status is set to on(1), the port will send flow control to the far end. If the status is set to off(2), the port will not send flow contr…	Enumerationr/w Enumerated Values: 1 on 2 off 3 desired	.1.3.6.1.4.1.9.5.1.4.1.1.15
portOperTxFlowControl Indicates the transmit flow control operational status of the port. If the port could not agree with the far end on a link protocol, its operational status will be disagree(3).	Enumeration Enumerated Values: 1 on 2 off 3 disagree	.1.3.6.1.4.1.9.5.1.4.1.1.16
portMacControlTransmitFrames The total number of MAC control frames passed to the MAC sublayer for transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.4.1.1.17
portMacControlReceiveFrames The total number of MAC control frames passed by the MAC sublayer to the MAC Control sublayer on receive.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.4.1.1.18
portMacControlPauseTransmitFrames The total number of PAUSE frames passed to the MAC sublayer for transmission.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.4.1.1.19
portMacControlPauseReceiveFrames The total number of PAUSE frames passed by the MAC sublayer to the MAC Control sublayer on receive.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.4.1.1.20
portMacControlUnknownProtocolFrames The total number of MAC Control frames received with an opcode that is not supported by the device.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.4.1.1.21
portLinkFaultStatus Specifies additional link fault status on a gigabit link. noFault: Link is up and operational. nearEndFault: The port is enabled but there is no GBIC present or the local port cann…	Enumeration Enumerated Values: 1 noFault 2 nearEndFault 3 nearEndConfigFail 4 farEndDisable 5 farEndFault 6 farEndConfigFail 7 notApplicable	.1.3.6.1.4.1.9.5.1.4.1.1.22
portAdditionalOperStatus The current operational status of the port which is showing additional detailed information of the port.	Bits Enumerated Values: 0 other 1 connected 2 standby 3 faulty 4 notConnected 5 inactive 6 shutdown 7 dripDis 8 disabled 9 monitor 10 errdisable 11 linkFaulty 12 onHook 13 offHook 14 reflector	.1.3.6.1.4.1.9.5.1.4.1.1.23
portInlinePowerDetect Indicate if the port detects an inline power capable device connected to it.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.5.1.4.1.1.24
portEntPhysicalIndex The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this port.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.5.1.4.1.1.25
portErrDisableTimeOutEnable Indicates whether a port that is put into errdisable state by a cause as specified by sysErrDisableTimeoutEnable will be re-enabled automatically during the timeout interval as specified by sysErrDisableTimeoutInterval.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.5.1.4.1.1.26

A list of brouter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

brouterPortEntry row .1.3.6.1.4.1.9.5.1.6.14.1

Entry containing bridge/router information for a
particular port on a module.

Indexes

brouterPortModule brouterPort

Column	Syntax	OID
brouterPortModule An index value that uniquely identifies the module index where this port is located.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.6.14.1.1
brouterPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.6.14.1.2
brouterPortIpVlan The IP Virtual LAN to which this port belongs.	CISCO-VTP-MIBVlanIndexr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.5.1.6.14.1.3
brouterPortIpAddr This port's IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.6.14.1.4
brouterPortNetMask This port's subnet mask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.6.14.1.5
brouterPortBroadcast This port's broadcast address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.6.14.1.6
brouterPortBridgeVlan The bridge Virtual LAN to which this port belongs.	Integer32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.9.5.1.6.14.1.7
brouterPortIpHelpers An indication of which other Virtual LANs UDP/IP broadcasts received on this port will be forwarded to. The normal situation is broadcasts NOT forwarded beyond the originating VLAN, but it can be useful in certain circu…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.5.1.6.14.1.8

A list of filter mac entries.

filterMacEntry row .1.3.6.1.4.1.9.5.1.7.1.1

Entry containing MAC address filter information.

Indexes

filterMacModule filterMacPort filterMacAddress

Column	Syntax	OID
filterMacModule An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.7.1.1.1
filterMacPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.7.1.1.2
filterMacAddress A MAC address. If the source or destination MAC address equals this value, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. The packet is dropped if a match doesn't occur and at least o…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.5.1.7.1.1.3
filterMacType Setting this object to invalid(2) removes the corresponding entry from the filterMacTable. To add a new entry to the filterMacTable, set this object to deny(1) or any value from permit(3) to denySrcLearn(8) for a module…	Enumerationr/w Enumerated Values: 1 deny 2 invalid 3 permit 4 permitSrc 5 permitDst 6 denySrc 7 denyDst 8 denySrcLearn	.1.3.6.1.4.1.9.5.1.7.1.1.4

A list of filter vendor ID entries.

filterVendorEntry row .1.3.6.1.4.1.9.5.1.7.2.1

Entry containing vendor ID filter information.

Indexes

filterVendorModule filterVendorPort filterVendorId

Column	Syntax	OID
filterVendorModule An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.7.2.1.1
filterVendorPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.7.2.1.2
filterVendorId The vendor ID portion of a MAC address. If the source or destination MAC address has the same vendor ID, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. The packet is dropped if a matc…	VendorIdType Type Constraints: range: 3	.1.3.6.1.4.1.9.5.1.7.2.1.3
filterVendorType Setting this object to invalid(2) removes the corresponding entry from the filterVendorTable. To add a new entry to the filterVendorTable, set this object to deny(1) or permit(3) for a module, port, and vendor ID not al…	Enumerationr/w Enumerated Values: 1 deny 2 invalid 3 permit	.1.3.6.1.4.1.9.5.1.7.2.1.4

A list of filter protocol entries.

filterProtocolEntry row .1.3.6.1.4.1.9.5.1.7.3.1

Entry containing PROTOCOL address filter
information.

Indexes

filterProtocolModule filterProtocolPort filterProtocolValue

Column	Syntax	OID
filterProtocolModule An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.7.3.1.1
filterProtocolPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.7.3.1.2
filterProtocolValue A 16-bit protocol value. If the packet's type field or the packet's DSAP/SSAP field is equal to this value, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. The packet is dropped if a m…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.7.3.1.3
filterProtocolType Setting this object to invalid(2) removes the corresponding entry from the filterProtocolTable. To add a new entry to the filterProtocolTable, set this object to deny(1) or permit(3) for a module, port, and protocol val…	Enumerationr/w Enumerated Values: 1 deny 2 invalid 3 permit	.1.3.6.1.4.1.9.5.1.7.3.1.4

A list of filter test entries.

filterTestEntry row .1.3.6.1.4.1.9.5.1.7.4.1

Entry containing test filter information.

Indexes

filterTestModule filterTestPort filterTestIndex

Column	Syntax	OID
filterTestModule An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.7.4.1.1
filterTestPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.7.4.1.2
filterTestIndex An index value that uniquely identifies a test for a particular module/port.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.9.5.1.7.4.1.3
filterTestType Setting this object to invalid(2) removes the corresponding entry from the filterTestTable. To add a new entry to the filterTestTable, set this object to valid(1) for a module, port, and test index not already in the ta…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.9.5.1.7.4.1.4
filterTestOffset A byte offset into packet. Must be a 32-bit word aligned offset, i.e. 0, 4, 8, etc.	Integer32r/w Constraints: range: 0-4500	.1.3.6.1.4.1.9.5.1.7.4.1.5
filterTestValue A 32-bit value to be compared against the packet location specified by filterTestOffset.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.5.1.7.4.1.6
filterTestMask A 32-bit value to be bitwise ANDed with the packet location specified by filterTestOffset before being compared to filterTestValue.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.5.1.7.4.1.7

A list of filter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

filterPortEntry row .1.3.6.1.4.1.9.5.1.7.5.1

Entry containing filter information for a
particular port on a module.

Indexes

filterPortModule filterPort

Column	Syntax	OID
filterPortModule An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.7.5.1.1
filterPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.7.5.1.2
filterPortComplex A complex expression made up of the numbers 1 through 8 indicating test results from filterTestIndex and using logical operators '&' (and), '|' (or), '!' (not), and parenthesis. For example: ((1 & 2) | !3). If this comp…	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.9.5.1.7.5.1.3
filterPortBroadcastThrottle The maximum number of broadcast packets per second allowed on this port. If the number of incoming broadcast packets in a one second interval exceeds this amount, packets are dropped for the rest of the interval. If the…	Integer32r/w Constraints: range: 0-150000	.1.3.6.1.4.1.9.5.1.7.5.1.4
filterPortBroadcastThreshold Indicates the integer part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. The associated object filterPortBroadcastThresholdFraction indicates t…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.9.5.1.7.5.1.5
filterPortBroadcastDiscards The number of packets discarded due to traffic suppression on this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.7.5.1.6
filterPortBroadcastThresholdFraction Indicates the fraction part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. The associated object filterPortBroadcastThreshold indicates the inte…	one-hundredthsInteger32r/w Constraints: range: 0-99	.1.3.6.1.4.1.9.5.1.7.5.1.7
filterPortSuppressionOption Indicates the traffic types that traffic suppression feature is enabled for. multicast(0) is set when multicast suppression is enabled. unicast(1) is set when unicast suppression is enabled. broadcast(2) …	Bitsr/w Enumerated Values: 0 multicast 1 unicast 2 broadcast	.1.3.6.1.4.1.9.5.1.7.5.1.8
filterPortSuppressionViolation Indicates the action that will be taken on this port when the percentage of either broadcast, multicast or unicast traffic exceeds the limit as indicated by filterPortBroadcastThreshold and filterPortBroadcastThresholdF…	Enumerationr/w Enumerated Values: 1 dropPackets 2 errdisable	.1.3.6.1.4.1.9.5.1.7.5.1.9

A list of Virtual LAN port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each
module.

vlanPortEntry row .1.3.6.1.4.1.9.5.1.9.3.1

Entry containing Virtual LAN information for a
particular port on a module.

Indexes

vlanPortModule vlanPort

Column	Syntax	OID
vlanPortModule An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.9.3.1.1
vlanPort An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.9.3.1.2
vlanPortVlan The Virtual LAN to which this port belongs.	CISCO-VTP-MIBVlanIndexr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.5.1.9.3.1.3
vlanPortIslVlansAllowed An indication of which Virtual LANs are allowed on this Inter-Switch Link. This is an octet string value with bits set to indicate allowed VLANs. It can be interpreted as a sum of f(x) as x goes from 0 to 1023, where f(…	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.5.1.9.3.1.5
vlanPortSwitchLevel Indicates the priority level the port uses to access the switching media. If vlanPortSwitchLevel is not applicable to the port, notApplicable(3) will be returned by the device.	Enumerationr/w Enumerated Values: 1 normal 2 high 3 notApplicable	.1.3.6.1.4.1.9.5.1.9.3.1.6
vlanPortIslAdminStatus Indicates the administrative status set on the trunk port while the operational status is the one that indicates whether the port is actually trunking or not. If the status is set to off(2), the port is permanently set …	Enumerationr/w Enumerated Values: 1 on 2 off 3 desirable 4 auto 5 onNoNegotiate	.1.3.6.1.4.1.9.5.1.9.3.1.7
vlanPortIslOperStatus Indicates if the port is actually trunking or not. In the case of ISL capable ports, the status depends on the success or failure of the negotiation process initiated by the port to become a trunk or non trunk. In the c…	Enumeration Enumerated Values: 1 trunking 2 notTrunking	.1.3.6.1.4.1.9.5.1.9.3.1.8
vlanPortIslPriorityVlans An indication of which Virtual LANs have a better dot1dStpPortPriority value. This object can be used to perform load balancing on Inter-Switch Links via spanning tree. An Inter-Switch Link has two dot1dStpPortPriority …	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.5.1.9.3.1.9
vlanPortAdminStatus Indicates whether the port will get assigned to a VLAN statically or dynamically. When it is set to dynamic, the needed information will be accessed from one of the Vlan Membership Policy Servers specified in the vmpsTa…	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.9.5.1.9.3.1.10
vlanPortOperStatus An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned or that a static or dynamic port has been assigned a VLAN that is not current…	Enumeration Enumerated Values: 1 inactive 2 active 3 shutdown 4 vlanActiveFault	.1.3.6.1.4.1.9.5.1.9.3.1.11
vlanPortAuxiliaryVlandeprecated The Voice Virtual Vlan ID (VVID) to which this port belongs to. If the VVID is not supported on the port, this MIB object will not be configurable and will return 4096. Setting this MIB object to 4096, th…	Integer32r/w Constraints: range: 0-1000 range: 1025-4096	.1.3.6.1.4.1.9.5.1.9.3.1.12

This table lists a maximum of 3 IP addresses of
Vlan Membership Policy Servers.

vmpsEntry row .1.3.6.1.4.1.9.5.1.9.4.1

A VMPS table entry.

Indexes

vmpsAddr

Column	Syntax	OID
vmpsAddr The IP address of a Vlan Membership Policy Server. To configure the internal VMPS, use the same IP address as specified in sysIpAddr.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.9.4.1.1
vmpsType To add a new entry to the vmpsTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise one of the other en…	Enumerationr/w Enumerated Values: 1 invalid 2 primary 3 other	.1.3.6.1.4.1.9.5.1.9.4.1.2

This table contains zero or more rows of trunk
VLAN to VLAN associations. The maximum number of
active entries is determined by
vlanTrunkMappingMax.
          
VLAN above 1k can not be created if the value of
corresponding instance of vlanTrunkMappingType is
dot1qToisl(2).

vlanTrunkMappingEntry row .1.3.6.1.4.1.9.5.1.9.8.1

Information about the VLAN mapping of a
particular trunk VLAN to another VLAN.

Indexes

vlanTrunkMappingFromVlan

Column	Syntax	OID
vlanTrunkMappingFromVlan The VLAN with this VLAN ID will be mapped to the VLAN in the corresponding instance of vlanTrunkMappingToVlan in the device. Agent returns inconsistentValue if this VLAN exists in the device. …	CISCO-VTP-MIBVlanIndex Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.5.1.9.8.1.1
vlanTrunkMappingToVlan The VLAN which the corresponding instance of vlanTrunkMappingFromVlan will be mapped to. Agent returns inconsistentValue if this VLAN exists in the device. Agent returns inconsistentValue i…	CISCO-VTP-MIBVlanIndexr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.5.1.9.8.1.2
vlanTrunkMappingType The type of this trunk VLAN mapping. reservedToNonReserved(1) An user defined association which maps a reserved VLAN to a non-reserved VLAN. dot1qToisl(2) An user defined associ…	Enumerationr/w Enumerated Values: 1 reservedToNonReserved 2 dot1qToisl	.1.3.6.1.4.1.9.5.1.9.8.1.3
vlanTrunkMappingOper Indicates whether this VLAN mapping is effective or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.5.1.9.8.1.4
vlanTrunkMappingStatus The status of this trunk VLAN mapping. Once a row becomes active, value in any other column within such row cannot be modified except by setting vlanTrunkMappingStatus to notInService(2) for such row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.5.1.9.8.1.5

A list of port security entries. The number of
entries is determined by the number of ports in
the system which support the Security feature.

portSecurityEntry row .1.3.6.1.4.1.9.5.1.10.1.1

Entry containing security information for a
particular port.

Indexes

portSecurityModuleIndex portSecurityPortIndex

Column	Syntax	OID
portSecurityModuleIndex An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.10.1.1.1
portSecurityPortIndex An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.10.1.1.2
portSecurityAdminStatus When security is enabled, source MAC addresses are monitored for all packets received on the port. If an address is detected that does not match the portSecuritySecureSrcAddr and any corresponding portSecurityExtSecureS…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.5.1.10.1.1.3
portSecurityOperStatus An indication of whether the port has been shut down as a result of an insecure address being detected on a secure port.	Enumeration Enumerated Values: 1 notShutdown 2 shutdown	.1.3.6.1.4.1.9.5.1.10.1.1.4
portSecurityLastSrcAddr The last source MAC address in a receive packet seen on the port.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.9.5.1.10.1.1.5
portSecuritySecureSrcAddr The address to be compared with source MAC addresses of received packets when the portSecurityAdminStatus is enabled(1). Setting this value to 0.0.0.0.0.0 puts the port in learning mode so that the next source MAC addre…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.9.5.1.10.1.1.6
portSecurityMaxSrcAddr The maximum number (N) of MAC address to be secured on the port. The first N MAC addresses learned or configured are made secured. If the user wants to make the port secured for more than one MAC address, the portSecuri…	Integer32r/w Constraints: range: 1-1025	.1.3.6.1.4.1.9.5.1.10.1.1.7
portSecurityAgingTime The interval in which the port is secured. After the expiration of the time, the corresponding portSecuritySecureSrcAddr or portSecurityExtSecureSrcAddr will be removed from the secure address list. If the value of this…	minutesInteger32r/w Constraints: range: 0-0 range: 10-1440	.1.3.6.1.4.1.9.5.1.10.1.1.8
portSecurityShutdownTimeOut The interval in which the port is shutdown due to the violation of security. After the expiration of the time all the security configuration of this port is re-installed and the port is enabled. If the value of this obj…	minutesInteger32r/w Constraints: range: 0-0 range: 10-1440	.1.3.6.1.4.1.9.5.1.10.1.1.9
portSecurityViolationPolicy If the value of this object is restrict(1) - the port drops all packets with insecured addresses. shutdown(2) - the port is forced to shut down if there is a violation of s…	Enumerationr/w Enumerated Values: 1 restrict 2 shutdown	.1.3.6.1.4.1.9.5.1.10.1.1.10

A list of port security entries. The number of
entries is determined by the number of ports in
the system which support the Security feature and
the number of MAC addresses learned/configured to
be secured per port.

portSecurityExtEntry row .1.3.6.1.4.1.9.5.1.10.2.1

Entry containing security information for a
particular port and a particular MAC address. The
entry can be configured by the user and can be
added by the agent when the device learns a new
secured MAC address.

Indexes

portSecurityExtModuleIndex portSecurityExtPortIndex portSecurityExtSecureSrcAddr

Column	Syntax	OID
portSecurityExtModuleIndex An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.10.2.1.1
portSecurityExtPortIndex An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.10.2.1.2
portSecurityExtSecureSrcAddr An index value that uniquely identifies the MAC address, which is to be secured.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.9.5.1.10.2.1.3
portSecurityExtControlStatus This object used to add or remove a secured MAC address of the corresponding port in the row. If setting this object to valid(1), the portSecurityExtSecureSrcAddr is made to be secured for the port. If setting this obje…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.9.5.1.10.2.1.4

Table containing token ring configuration
information.

tokenRingPortEntry row .1.3.6.1.4.1.9.5.1.11.1.1

Entry containing token ring configuration
information for a particular port.

Indexes

tokenRingModuleIndex tokenRingPortIndex

Column	Syntax	OID
tokenRingModuleIndex An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.11.1.1.1
tokenRingPortIndex An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.11.1.1.2
tokenRingPortSetACbits Specifies if the AC bits shall be set unconditionally when a port forwards certain LLC frames.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.5.1.11.1.1.3
tokenRingPortMode Specifies the port's mode of operation. auto: Automatically detect the port mode upon insertion. fdxCport: Transmit Immediate (full-duplex) Concentrator Port…	Enumerationr/w Enumerated Values: 1 auto 2 fdxCport 3 fdxStation 4 hdxCport 5 hdxStation 7 riro	.1.3.6.1.4.1.9.5.1.11.1.1.4
tokenRingPortEarlyTokenRel This object provides the ability to enable or disable early token release for a particular port. Early token release only applies to ports operating at 16 Mbps. If ifSpeed reflects 4 Mbps for a particular…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.5.1.11.1.1.9
tokenRingPortPriorityThresh The highest token ring frame priority that shall go to the low-priority transmit queue.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.5.1.11.1.1.10
tokenRingPortPriorityMinXmit The minimum token priority that will be used for transmit.	Integer32r/w Constraints: range: 0-6	.1.3.6.1.4.1.9.5.1.11.1.1.11
tokenRingPortCfgLossThresh Number of configuration loss events during the sample interval which, if exceeded, should cause the port to be disabled. If the port is disabled by this function the port must be administratively re-enabled.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.5.1.11.1.1.12
tokenRingPortCfgLossInterval The sampling interval, in minutes, for which the port monitors to see if the configuration loss threshold has been exceeded.	Integer32r/w Constraints: range: 1-9999	.1.3.6.1.4.1.9.5.1.11.1.1.13

A table containing DRiP VLAN status information
local to this system. The existence of an
entry indicates that at least one local port
is assigned to the associated TR-CRF VLAN.

tokenRingDripLocalVlanStatusEntry row .1.3.6.1.4.1.9.5.1.11.12.1

Entry containing DRiP related information for
a particular TR-CRF VLAN.

Indexes

tokenRingDripVlan

Column	Syntax	OID
tokenRingDripVlan A TR-CRF VLAN ID.	CISCO-VTP-MIBVlanIndex Type Constraints: range: 0..4095	.1.3.6.1.4.1.9.5.1.11.12.1.1
tokenRingDripLocalPortStatus This object reflects DRiP's status regarding the overall set of local ports assigned to the TR-CRF VLAN associated with this entry. A value of active(1) indicates that at least one local port is inserted/connected (i.e.…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.5.1.11.12.1.2
tokenRingDripRemotePortStatus This object reflects DRiP's status regarding any ports on remote systems. A value of active(1) indicates that at least one remote port is inserted/connected (i.e., active on the Token Ring). A value of inactive(2) indic…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.5.1.11.12.1.3
tokenRingDripRemotePortConfigured This object reflects whether or not DRiP has detected remote ports assigned to the TR-CRF VLAN associated with this entry. A value of true(1) indicates there is at least one port on a remote system assigned to this TR-C…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.9.5.1.11.12.1.4
tokenRingDripDistributedCrf This object reflects whether DRiP considers the TR-CRF VLAN associated with this entry to be distributed across systems. A value of true(1) indicates the TR-CRF is distributed. A value of false(2) indicates the TR-CRF i…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.9.5.1.11.12.1.5
tokenRingDripBackupCrf This object reflects whether or not the TR-CRF VLAN associated with this entry is configured as a backup TR-CRF. A value of true(1) indicates the TR-CRF is a configured as a backup. A value of false(2) indicates the TR-…	Enumeration Enumerated Values: 1 true 2 false	.1.3.6.1.4.1.9.5.1.11.12.1.6
tokenRingDripOwnerNodeID The unique identifier of the system that has advertised that it has local ports assigned to the TR-CRF VLAN associated with this entry.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.9.5.1.11.12.1.7

Table containing token ring soft error monitoring
configuration information.

tokenRingPortSoftErrEntry row .1.3.6.1.4.1.9.5.1.11.14.1

Entry containing token ring soft error monitoring
configuration information for a particular port.

Indexes

No indexes recorded

Column	Syntax	OID
tokenRingPortSoftErrThresh The number of soft errors reported from a station connected to this port which, if exceeded, should cause a soft error exceeded trap to be issued. The error counters being monitored and compared to this threshold value …	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.11.14.1.1
tokenRingPortSoftErrReportInterval The sampling period, in seconds, in which each station connected to this port will be monitored for excessive soft error reports. If a station reports more than tokenRingPortSoftErrThreshold errors within the sampling p…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.5.1.11.14.1.2
tokenRingPortSoftErrResetCounters When this object is set to reset(2), all Soft Error Monitoring related counters on this port will be set to 0.	Enumerationr/w Enumerated Values: 1 noop 2 reset	.1.3.6.1.4.1.9.5.1.11.14.1.3
tokenRingPortSoftErrLastCounterReset The time (in hundredths of a second) since Soft Error Monitoring counters for this port were last cleared.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.11.14.1.4
tokenRingPortSoftErrEnable Indicates whether the Token Ring Soft Error Monitoring feature is enabled on this port or not. The detailed soft error statistics are provided by Token Ring RMON SNMP objects. Thus, if RMON (sysEnableRmon) is disabled(2…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.9.5.1.11.14.1.5

A list of multicast router port entries. The
number of entries is determined by the number of
ports in the system.

mcastRouterEntry row .1.3.6.1.4.1.9.5.1.12.1.1

Entry containing multicast router information for
a particular port.

Indexes

mcastRouterModuleIndex mcastRouterPortIndex

Column	Syntax	OID
mcastRouterModuleIndex An index value that uniquely identifies the module where this port is located (see portModuleIndex).	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.5.1.12.1.1.1
mcastRouterPortIndex An index value that uniquely identifies this port within a module (see portIndex).	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.5.1.12.1.1.2
mcastRouterAdminStatus And indication of whether the presence of an IP multicast router on this port is to be determined statically or dynamically. The value routerPresent(1) indicates that the presence of a router is statically configured to…	Enumerationr/w Enumerated Values: 1 routerPresent 3 dynamic	.1.3.6.1.4.1.9.5.1.12.1.1.3
mcastRouterOperStatus An indication of whether an IP multicast router is present on this port.	Enumeration Enumerated Values: 1 routerPresent 2 noRouter	.1.3.6.1.4.1.9.5.1.12.1.1.4

This table lists a maximum of 3 DNS servers.

dnsServerEntry row .1.3.6.1.4.1.9.5.1.13.2.1

A DNS server table entry.

Indexes

dnsServerAddr

Column	Syntax	OID
dnsServerAddr The IP address of a DNS server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.13.2.1.1
dnsServerType To add a new entry to the dnsServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise, one of the ot…	Enumerationr/w Enumerated Values: 1 invalid 2 primary 3 other	.1.3.6.1.4.1.9.5.1.13.2.1.2

This table lists a maximum of 3 system log
servers.

syslogServerEntry row .1.3.6.1.4.1.9.5.1.14.1.1

A system log server table entry.

Indexes

syslogServerAddr

Column	Syntax	OID
syslogServerAddr The IP address of a system log Server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.14.1.1.1
syslogServerType To add/remove a new entry to the syslogServerTable, setting to invalid(2) removes the corresponding entry from the syslogServerTable. To add a new entry into syslogServerTable, set this object to valid(1) for an IP addr…	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.9.5.1.14.1.1.2

This table contains the information about what
system log messages should be sent to syslog host,
console, login session, and/or logged into the
internal buffer.

syslogMessageControlEntry row .1.3.6.1.4.1.9.5.1.14.4.1

A system log message control table entry.

Indexes

syslogMessageFacility

Column	Syntax	OID
syslogMessageFacility System log message facility.	Enumeration Enumerated Values: 1 cdp 2 mcast 3 dtp 4 dvlan 5 earl 6 fddi 7 ip 8 pruning 9 snmp 10 spantree 11 system 12 tac 13 tcp 14 telnet 15 tftp 16 vtp 17 vmps 18 kernel 19 filesys 20 drip 21 pagp 22 mgmt 23 mls 24 protfilt 25 security 26 radius 27 udld 28 gvrp 29 cops 30 qos 31 acl 32 rsvp 33 ld 34 privatevlan 35 ethc 36 gl2pt 37 callhome 38 dhcpsnooping 40 diags 42 eou 43 backup 44 eoam 45 webauth 46 dom 47 mvrp	.1.3.6.1.4.1.9.5.1.14.4.1.1
syslogMessageSeverity System log message severity.	Enumerationr/w Enumerated Values: 1 emergencies 2 alerts 3 critical 4 errors 5 warnings 6 notification 7 informational 8 debugging	.1.3.6.1.4.1.9.5.1.14.4.1.2

A list of NTP Server entries. This table lists a
maximum of 10 Entries.

ntpServerEntry row .1.3.6.1.4.1.9.5.1.15.4.1

Entry containing NTP information for a particular
entry.

Indexes

ntpServerAddress

Column	Syntax	OID
ntpServerAddress Entry containing NTP Server's IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.5.1.15.4.1.1
ntpServerType To add or remove an entry to ntpServerTable. Setting to 1 adds the entry and setting to 2 clears the entry.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.9.5.1.15.4.1.2
ntpServerPublicKey The key to be used when communicating with this server. A key with a value of zero indicates an invalid ntpServerPublicKey. When the authentication feature is enabled the system will not sync with this server when ntpAu…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.5.1.15.4.1.3