Standard view Table view

CISCO-VTP-MIB

Monitored by Observium 
        The MIB module for entities implementing the VTP
protocol and Vlan management.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Ports VLANs
Explore Observium network monitoring
Source file
CISCO-VTP-MIB
Last revised
Identity
ciscoVtpMIB
Base OID
1.3.6.1.4.1.9.9.46
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC Cisco2KVlanList
IF-MIB ifIndex InterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType
RMON-MIB OwnerString
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC DateAndTime DisplayString RowStatus TestAndIncr TEXTUAL-CONVENTION TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VTP-MIB::ciscoVtpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VTP-MIB::ciscoVtpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (179)
9 directly used by Observium
ciscoVtpMIB
.1.3.6.1.4.1.9.9.46
vtpMIBObjects
.1.3.6.1.4.1.9.9.46.1
vtpStatus
.1.3.6.1.4.1.9.9.46.1.1
vtpVersion OBS ✓
Enumeration
 .1.3.6.1.4.1.9.9.46.1.1.1
vtpMaxVlanStorage
Integer32
 .1.3.6.1.4.1.9.9.46.1.1.2
vtpNotificationsEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.1.3
vtpVlanCreatedNotifEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.1.4
vtpVlanDeletedNotifEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.1.5
vlanStatistics
.1.3.6.1.4.1.9.9.46.1.10
vlanStatsVlans
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.46.1.10.1
vlanStatsExtendedVlans
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.46.1.10.2
vlanStatsInternalVlans
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.46.1.10.3
vlanStatsFreeVlans
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.46.1.10.4
vlanManagementDomains OBS ✓
.1.3.6.1.4.1.9.9.46.1.2
managementDomainTable
.1.3.6.1.4.1.9.9.46.1.2.1
managementDomainEntry
managementDomainIndex
 .1.3.6.1.4.1.9.9.46.1.2.1.1
managementDomainIndex
ManagementDomainIndex
 .1.3.6.1.4.1.9.9.46.1.2.1.1.1
managementDomainPruningState r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.2.1.1.10
managementDomainVersionInUse r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.2.1.1.11
managementDomainPruningStateOper
Enumeration
 .1.3.6.1.4.1.9.9.46.1.2.1.1.12
managementDomainAdminSrcIf r/w
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.9.46.1.2.1.1.13
managementDomainSourceOnlyMode r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.2.1.1.14
managementDomainOperSrcIf
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.9.46.1.2.1.1.15
managementDomainConfigFile r/w
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.9.46.1.2.1.1.16
managementDomainLocalUpdaterType
INET-ADDRESS-MIBInetAddressType
 .1.3.6.1.4.1.9.9.46.1.2.1.1.17
managementDomainLocalUpdater
INET-ADDRESS-MIBInetAddress
 .1.3.6.1.4.1.9.9.46.1.2.1.1.18
managementDomainDeviceID
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.9.46.1.2.1.1.19
managementDomainName r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.2.1.1.2
managementDomainLocalMode r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.2.1.1.3
managementDomainConfigRevNumber
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.9.9.46.1.2.1.1.4
managementDomainLastUpdater
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.9.9.46.1.2.1.1.5
managementDomainLastChange
SNMPv2-TCDateAndTime
 .1.3.6.1.4.1.9.9.46.1.2.1.1.6
managementDomainRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.46.1.2.1.1.7
managementDomainTftpServer r/w
SNMPv2-SMIIpAddress
 .1.3.6.1.4.1.9.9.46.1.2.1.1.8
managementDomainTftpPathname r/w
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.9.9.46.1.2.1.1.9
vlanInfo
.1.3.6.1.4.1.9.9.46.1.3
vtpVlanTable
.1.3.6.1.4.1.9.9.46.1.3.1
vtpVlanEntry
managementDomainIndexvtpVlanIndex
 .1.3.6.1.4.1.9.9.46.1.3.1.1
vtpVlanIndex
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.3.1.1.1
vtpVlanParentVlan
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.3.1.1.10
vtpVlanTranslationalVlan1
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.3.1.1.11
vtpVlanTranslationalVlan2
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.3.1.1.12
vtpVlanBridgeType
Enumeration
 .1.3.6.1.4.1.9.9.46.1.3.1.1.13
vtpVlanAreHopCount
Integer32
 .1.3.6.1.4.1.9.9.46.1.3.1.1.14
vtpVlanSteHopCount
Integer32
 .1.3.6.1.4.1.9.9.46.1.3.1.1.15
vtpVlanIsCRFBackup
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.3.1.1.16
vtpVlanTypeExt
VlanTypeExt
 .1.3.6.1.4.1.9.9.46.1.3.1.1.17
vtpVlanIfIndex OBS ✓
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.4.1.9.9.46.1.3.1.1.18
vtpVlanState OBS ✓
Enumeration
 .1.3.6.1.4.1.9.9.46.1.3.1.1.2
vtpVlanType OBS ✓
VlanType
 .1.3.6.1.4.1.9.9.46.1.3.1.1.3
vtpVlanName OBS ✓
OctetString
 .1.3.6.1.4.1.9.9.46.1.3.1.1.4
vtpVlanMtu OBS ✓
Integer32
 .1.3.6.1.4.1.9.9.46.1.3.1.1.5
vtpVlanDot10Said
OctetString
 .1.3.6.1.4.1.9.9.46.1.3.1.1.6
vtpVlanRingNumber
Integer32
 .1.3.6.1.4.1.9.9.46.1.3.1.1.7
vtpVlanBridgeNumber
Integer32
 .1.3.6.1.4.1.9.9.46.1.3.1.1.8
vtpVlanStpType
Enumeration
 .1.3.6.1.4.1.9.9.46.1.3.1.1.9
internalVlanInfo
.1.3.6.1.4.1.9.9.46.1.3.2
vtpInternalVlanAllocPolicy r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.3.2.1
vtpInternalVlanTable
.1.3.6.1.4.1.9.9.46.1.3.2.2
vtpInternalVlanEntry
managementDomainIndexvtpVlanIndex
 .1.3.6.1.4.1.9.9.46.1.3.2.2.1
vtpInternalVlanOwner
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.9.46.1.3.2.2.1.1
vlanEdit
.1.3.6.1.4.1.9.9.46.1.4
vtpEditControlTable
.1.3.6.1.4.1.9.9.46.1.4.1
vtpEditControlEntry
.1.3.6.1.4.1.9.9.46.1.4.1.1
vtpVlanEditOperation r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.4.1.1.1
vtpVlanApplyStatus
Enumeration
 .1.3.6.1.4.1.9.9.46.1.4.1.1.2
vtpVlanEditBufferOwner r/w
RMON-MIBOwnerString
 .1.3.6.1.4.1.9.9.46.1.4.1.1.3
vtpVlanEditConfigRevNumber r/w
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.9.9.46.1.4.1.1.4
vtpVlanEditModifiedVlan
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.4.1.1.5
vtpVlanEditTable
.1.3.6.1.4.1.9.9.46.1.4.2
vtpVlanEditEntry
managementDomainIndexvtpVlanEditIndex
 .1.3.6.1.4.1.9.9.46.1.4.2.1
vtpVlanEditIndex
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.4.2.1.1
vtpVlanEditParentVlan r/w
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.4.2.1.10
vtpVlanEditRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.46.1.4.2.1.11
vtpVlanEditTranslationalVlan1 r/w
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.4.2.1.12
vtpVlanEditTranslationalVlan2 r/w
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.4.2.1.13
vtpVlanEditBridgeType r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.4.2.1.14
vtpVlanEditAreHopCount r/w
Integer32
 .1.3.6.1.4.1.9.9.46.1.4.2.1.15
vtpVlanEditSteHopCount r/w
Integer32
 .1.3.6.1.4.1.9.9.46.1.4.2.1.16
vtpVlanEditIsCRFBackup r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.4.2.1.17
vtpVlanEditTypeExt deprecated
VlanTypeExt
 .1.3.6.1.4.1.9.9.46.1.4.2.1.18
vtpVlanEditTypeExt2 r/w
VlanTypeExt
 .1.3.6.1.4.1.9.9.46.1.4.2.1.19
vtpVlanEditState r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.4.2.1.2
vtpVlanEditType r/w
VlanType
 .1.3.6.1.4.1.9.9.46.1.4.2.1.3
vtpVlanEditName r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.4.2.1.4
vtpVlanEditMtu r/w
Integer32
 .1.3.6.1.4.1.9.9.46.1.4.2.1.5
vtpVlanEditDot10Said r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.4.2.1.6
vtpVlanEditRingNumber r/w
Integer32
 .1.3.6.1.4.1.9.9.46.1.4.2.1.7
vtpVlanEditBridgeNumber r/w
Integer32
 .1.3.6.1.4.1.9.9.46.1.4.2.1.8
vtpVlanEditStpType r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.4.2.1.9
vtpVlanLocalShutdownTable
.1.3.6.1.4.1.9.9.46.1.4.3
vtpVlanLocalShutdownEntry
managementDomainIndexvtpVlanIndex
 .1.3.6.1.4.1.9.9.46.1.4.3.1
vtpVlanLocalShutdown r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.4.3.1.1
vtpStats
.1.3.6.1.4.1.9.9.46.1.5
vtpStatsTable
.1.3.6.1.4.1.9.9.46.1.5.1
vtpStatsEntry
.1.3.6.1.4.1.9.9.46.1.5.1.1
vtpInSummaryAdverts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.1
vtpInSubsetAdverts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.2
vtpInAdvertRequests
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.3
vtpOutSummaryAdverts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.4
vtpOutSubsetAdverts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.5
vtpOutAdvertRequests
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.6
vtpConfigRevNumberErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.7
vtpConfigDigestErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.5.1.1.8
vlanTrunkPorts
.1.3.6.1.4.1.9.9.46.1.6
vlanTrunkPortTable
.1.3.6.1.4.1.9.9.46.1.6.1
vlanTrunkPortEntry
vlanTrunkPortIfIndex
 .1.3.6.1.4.1.9.9.46.1.6.1.1
vlanTrunkPortIfIndex
IF-MIBInterfaceIndex
 .1.3.6.1.4.1.9.9.46.1.6.1.1.1
vlanTrunkPortVlansPruningEligible r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.10
vlanTrunkPortVlansXmitJoined
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.11
vlanTrunkPortVlansRcvJoined
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.12
vlanTrunkPortDynamicState r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.6.1.1.13
vlanTrunkPortDynamicStatus
Enumeration
 .1.3.6.1.4.1.9.9.46.1.6.1.1.14
vlanTrunkPortVtpEnabled r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.6.1.1.15
vlanTrunkPortEncapsulationOperType OBS ✓
Enumeration
 .1.3.6.1.4.1.9.9.46.1.6.1.1.16
vlanTrunkPortVlansEnabled2k r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.17
vlanTrunkPortVlansEnabled3k r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.18
vlanTrunkPortVlansEnabled4k r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.19
vlanTrunkPortManagementDomain r/w
ManagementDomainIndex
 .1.3.6.1.4.1.9.9.46.1.6.1.1.2
vtpVlansPruningEligible2k r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.20
vtpVlansPruningEligible3k r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.21
vtpVlansPruningEligible4k r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.22
vlanTrunkPortVlansXmitJoined2k
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.23
vlanTrunkPortVlansXmitJoined3k
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.24
vlanTrunkPortVlansXmitJoined4k
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.25
vlanTrunkPortVlansRcvJoined2k
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.26
vlanTrunkPortVlansRcvJoined3k
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.27
vlanTrunkPortVlansRcvJoined4k
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.28
vlanTrunkPortDot1qTunnel deprecated r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.6.1.1.29
vlanTrunkPortEncapsulationType r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.6.1.1.3
vlanTrunkPortVlansActiveFirst2k
CISCO-TCCisco2KVlanList
 .1.3.6.1.4.1.9.9.46.1.6.1.1.30
vlanTrunkPortVlansActiveSecond2k
CISCO-TCCisco2KVlanList
 .1.3.6.1.4.1.9.9.46.1.6.1.1.31
vlanTrunkPortVlansEnabled r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.6.1.1.4
vlanTrunkPortNativeVlan OBS ✓ r/w
VlanIndex
 .1.3.6.1.4.1.9.9.46.1.6.1.1.5
vlanTrunkPortRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.46.1.6.1.1.6
vlanTrunkPortInJoins
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.6.1.1.7
vlanTrunkPortOutJoins
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.6.1.1.8
vlanTrunkPortOldAdverts
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.46.1.6.1.1.9
vlanTrunkPortSetSerialNo r/w
SNMPv2-TCTestAndIncr
 .1.3.6.1.4.1.9.9.46.1.6.2
vlanTrunkPortsDot1qTag deprecated r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.6.3
vtpDiscover
.1.3.6.1.4.1.9.9.46.1.7
vtpDiscoverTable
.1.3.6.1.4.1.9.9.46.1.7.1
vtpDiscoverEntry
managementDomainIndex
 .1.3.6.1.4.1.9.9.46.1.7.1.1
vtpDiscoverAction r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.7.1.1.1
vtpDiscoverStatus
Enumeration
 .1.3.6.1.4.1.9.9.46.1.7.1.1.2
vtpLastDiscoverTime
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.9.46.1.7.1.1.3
vtpDiscoverResultTable
.1.3.6.1.4.1.9.9.46.1.7.2
vtpDiscoverResultEntry
managementDomainIndexvtpDiscoverResultIndex
 .1.3.6.1.4.1.9.9.46.1.7.2.1
vtpDiscoverResultIndex
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.46.1.7.2.1.1
vtpDiscoverResultDatabaseName
OctetString
 .1.3.6.1.4.1.9.9.46.1.7.2.1.2
vtpDiscoverResultConflicting
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.7.2.1.3
vtpDiscoverResultDeviceId
OctetString
 .1.3.6.1.4.1.9.9.46.1.7.2.1.4
vtpDiscoverResultPrimaryServer
OctetString
 .1.3.6.1.4.1.9.9.46.1.7.2.1.5
vtpDiscoverResultRevNumber
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.9.9.46.1.7.2.1.6
vtpDiscoverResultSystemName
OctetString
 .1.3.6.1.4.1.9.9.46.1.7.2.1.7
vtpDatabase
.1.3.6.1.4.1.9.9.46.1.8
vtpDatabaseTable
.1.3.6.1.4.1.9.9.46.1.8.1
vtpDatabaseEntry
managementDomainIndexvtpDatabaseIndex
 .1.3.6.1.4.1.9.9.46.1.8.1.1
vtpDatabaseIndex
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.46.1.8.1.1.1
vtpDatabaseName
OctetString
 .1.3.6.1.4.1.9.9.46.1.8.1.1.2
vtpDatabaseLocalMode r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.8.1.1.3
vtpDatabaseRevNumber
SNMPv2-SMIGauge32
 .1.3.6.1.4.1.9.9.46.1.8.1.1.4
vtpDatabasePrimaryServer
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.8.1.1.5
vtpDatabasePrimaryServerId
OctetString
 .1.3.6.1.4.1.9.9.46.1.8.1.1.6
vtpDatabaseTakeOverPrimary r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.46.1.8.1.1.7
vtpDatabaseTakeOverPassword r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.8.1.1.8
vtpAuthentication
.1.3.6.1.4.1.9.9.46.1.9
vtpAuthenticationTable
.1.3.6.1.4.1.9.9.46.1.9.1
vtpAuthEntry
managementDomainIndex
 .1.3.6.1.4.1.9.9.46.1.9.1.1
vtpAuthPassword r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.9.1.1.1
vtpAuthPasswordType r/w
Enumeration
 .1.3.6.1.4.1.9.9.46.1.9.1.1.2
vtpAuthSecretKey r/w
OctetString
 .1.3.6.1.4.1.9.9.46.1.9.1.1.3
vtpNotifications
.1.3.6.1.4.1.9.9.46.2
vtpNotificationsPrefix
.1.3.6.1.4.1.9.9.46.2.0
vtpNotificationsObjects
.1.3.6.1.4.1.9.9.46.2.1
vtpVlanPortLocalSegment
Integer32
 .1.3.6.1.4.1.9.9.46.2.1.1
vtpMIBConformance
.1.3.6.1.4.1.9.9.46.3
vtpMIBCompliances
.1.3.6.1.4.1.9.9.46.3.1
vtpMIBGroups
.1.3.6.1.4.1.9.9.46.3.2
Dependencies (11) 9 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-TCcisco
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. INET-ADDRESS-MIBrfc
  10. RMON-MIBrfc
  11. SNMP-FRAMEWORK-MIBrfc
  12. CISCO-VTP-MIBciscoselected
Type Definitions (4)
ManagementDomainIndex
Integer32 range: 1..255
VlanIndex
Integer32 range: 0..4095
VlanType
Enumeration
ethernet(1)
fddi(2)
tokenRing(3)
fddiNet(4)
trNet(5)
deprecated(6)
VlanTypeExt
Bits
vtpmanageable(0)
internal(1)
reserved(2)
rspan(3)
dynamicGvrp(4)
Conformance Groups (39)
vtpBasicGroup
vtpVersion vtpMaxVlanStorage vtpNotificationsEnabled managementDomainName managementDomainLocalMode managementDomainConfigRevNumber managementDomainLastUpdater managementDomainLastChange managementDomainTftpServer managementDomainTftpPathname managementDomainRowStatus
A collection of objects providing basic status and control
of a VTP implementation.
 .1.3.6.1.4.1.9.9.46.3.2.1
vtpStatsGroup
vtpInSummaryAdverts vtpInSubsetAdverts vtpInAdvertRequests vtpOutSummaryAdverts vtpOutSubsetAdverts vtpOutAdvertRequests vtpConfigRevNumberErrors vtpConfigDigestErrors
A collection of objects providing VTP statistics.
 .1.3.6.1.4.1.9.9.46.3.2.4
vtpTrunkPortGroup
vlanTrunkPortManagementDomain vlanTrunkPortEncapsulationType vlanTrunkPortVlansEnabled vlanTrunkPortNativeVlan vlanTrunkPortRowStatus vlanTrunkPortSetSerialNo
A collection of objects providing information on trunk
ports.
 .1.3.6.1.4.1.9.9.46.3.2.5
vtpConfigNotificationsGroup deprecated
vtpConfigDigestError vtpConfigRevNumberError vtpServerDisabled vtpMtuTooBig vtpVersionOneDeviceDetected vlanTrunkPortDynamicStatusChange
The notifications which a VTP implementation is
required to implement.
vtpConfigNotificationsGroup object is superseded by vtpConfigNotificationsGroupRev1, vtpConfigNotificationsGroup5.
 .1.3.6.1.4.1.9.9.46.3.2.6
vtpTrunkPruningGroup
vlanTrunkPortInJoins vlanTrunkPortOutJoins vlanTrunkPortOldAdverts vlanTrunkPortVlansPruningEligible vlanTrunkPortVlansXmitJoined vlanTrunkPortVlansRcvJoined
A collection of objects providing information on VLAN
pruning.
 .1.3.6.1.4.1.9.9.46.3.2.7
vtpTrunkPruningGroup2
managementDomainPruningState
A collection of object providing information on whether
VLAN pruning is enabled.
 .1.3.6.1.4.1.9.9.46.3.2.10
vtpTrunkPortGroup2
vlanTrunkPortDynamicState vlanTrunkPortDynamicStatus vlanTrunkPortVtpEnabled
Additional functionality added to the
vlanTrunkPortTable.
 .1.3.6.1.4.1.9.9.46.3.2.11
vtpVersion2BasicGroup
managementDomainVersionInUse
The object required to indicate the version of VTP in
use by a management domain.
 .1.3.6.1.4.1.9.9.46.3.2.12
vtpVlanInfoGroup
vtpVlanState vtpVlanType vtpVlanName vtpVlanMtu vtpVlanDot10Said vtpVlanRingNumber vtpVlanBridgeNumber vtpVlanStpType vtpVlanParentVlan vtpVlanTranslationalVlan1 vtpVlanTranslationalVlan2 vtpVlanBridgeType vtpVlanAreHopCount vtpVlanSteHopCount vtpVlanIsCRFBackup
A collection of objects for monitoring VLAN information.
 .1.3.6.1.4.1.9.9.46.3.2.13
vtpVlanInfoEditGroup
vtpVlanEditOperation vtpVlanApplyStatus vtpVlanEditBufferOwner vtpVlanEditConfigRevNumber vtpVlanEditState vtpVlanEditType vtpVlanEditName vtpVlanEditMtu vtpVlanEditDot10Said vtpVlanEditRingNumber vtpVlanEditBridgeNumber vtpVlanEditStpType vtpVlanEditParentVlan vtpVlanEditRowStatus vtpVlanEditTranslationalVlan1 vtpVlanEditTranslationalVlan2 vtpVlanEditBridgeType vtpVlanEditAreHopCount vtpVlanEditSteHopCount vtpVlanEditIsCRFBackup
A collection of objects for editing VLAN information in VTP
Servers.
 .1.3.6.1.4.1.9.9.46.3.2.14
vtpTrunkPortGroup3
vlanTrunkPortEncapsulationOperType
Additional functionality added to the
vlanTrunkPortTable.
 .1.3.6.1.4.1.9.9.46.3.2.15
vtp4kVlanGroup deprecated
vtpVlanTypeExt vtpVlanEditTypeExt vlanTrunkPortVlansEnabled2k vlanTrunkPortVlansEnabled3k vlanTrunkPortVlansEnabled4k vtpVlansPruningEligible2k vtpVlansPruningEligible3k vtpVlansPruningEligible4k vlanTrunkPortVlansXmitJoined2k vlanTrunkPortVlansXmitJoined3k vlanTrunkPortVlansXmitJoined4k vlanTrunkPortVlansRcvJoined2k vlanTrunkPortVlansRcvJoined3k vlanTrunkPortVlansRcvJoined4k
A collection of objects providing information
for VLANS with VlanIndex from 1024 to 4095.
vtp4kVlanGroup object is superseded by vtp4kVlanGroupRev1.
 .1.3.6.1.4.1.9.9.46.3.2.16
vtpDot1qTunnelGroup deprecated
vlanTrunkPortsDot1qTag vlanTrunkPortDot1qTunnel
A collection of objects providing information
for dot1qtunnel feature.
vtpDot1qTunnelGroup object is superseded by vtpDot1qTunnelGroup2.
 .1.3.6.1.4.1.9.9.46.3.2.17
vtpVlanIfIndexGroup
vtpVlanIfIndex
A collection of objects providing information
for mapping of VLAN ID to its corresponding
ifIndex.
 .1.3.6.1.4.1.9.9.46.3.2.18
vtpVlanInfoEditGroup2
vtpVlanEditModifiedVlan
A collection of objects for editing VLAN information when
only one VLAN is allowed to be edited for each 'apply'
operation.
 .1.3.6.1.4.1.9.9.46.3.2.19
vtp4kVlanGroupRev1
vtpVlanTypeExt vtpVlanEditTypeExt2 vlanTrunkPortVlansEnabled2k vlanTrunkPortVlansEnabled3k vlanTrunkPortVlansEnabled4k vtpVlansPruningEligible2k vtpVlansPruningEligible3k vtpVlansPruningEligible4k vlanTrunkPortVlansXmitJoined2k vlanTrunkPortVlansXmitJoined3k vlanTrunkPortVlansXmitJoined4k vlanTrunkPortVlansRcvJoined2k vlanTrunkPortVlansRcvJoined3k vlanTrunkPortVlansRcvJoined4k
A collection of objects providing information
for VLANS with VlanIndex from 1024 to 4095.
 .1.3.6.1.4.1.9.9.46.3.2.20
vtpNotificationObjectsGroup
vtpVlanPortLocalSegment
A collection of objects included in VTP notifications.
 .1.3.6.1.4.1.9.9.46.3.2.21
vtpDot1qTunnelGroup2 deprecated
vlanTrunkPortsDot1qTag
A collection of objects providing information
for dot1qtunnel feature.
 .1.3.6.1.4.1.9.9.46.3.2.22
vtpConfigNotificationsGroup2
vtpLocalModeChanged vtpVersionInUseChanged
The notifications which a VTP implementation is
required to implement.
 .1.3.6.1.4.1.9.9.46.3.2.23
vtpVlanNotifEnabledGroup
vtpVlanCreatedNotifEnabled vtpVlanDeletedNotifEnabled
A collection of objects to indicate whether a
certain group of notifications are enabled.
 .1.3.6.1.4.1.9.9.46.3.2.24
vtpConfigNotificationsGroup3
vtpVlanCreated vtpVlanDeleted
The notifications implemented by a device which
supports these features.
 .1.3.6.1.4.1.9.9.46.3.2.25
vtpConfigNotificationsGroup4
vtpVlanRingNumberConflict
The notifications implemented by a device which
supports these features.
 .1.3.6.1.4.1.9.9.46.3.2.26
vtpDiscoverGroup
vtpDiscoverAction vtpDiscoverStatus vtpLastDiscoverTime vtpDiscoverResultIndex vtpDiscoverResultDatabaseName vtpDiscoverResultConflicting vtpDiscoverResultDeviceId vtpDiscoverResultPrimaryServer vtpDiscoverResultRevNumber vtpDiscoverResultSystemName
A collection of objects providing information of
VTP discovery.
 .1.3.6.1.4.1.9.9.46.3.2.27
vtpDatabaseGroup
vtpDatabaseName vtpDatabaseLocalMode vtpDatabaseRevNumber vtpDatabasePrimaryServer vtpDatabasePrimaryServerId vtpDatabaseTakeOverPrimary vtpDatabaseTakeOverPassword
A collection of objects providing information of
VTP databases.
 .1.3.6.1.4.1.9.9.46.3.2.28
vtpAuthGroup
vtpAuthPassword vtpAuthPasswordType vtpAuthSecretKey
A collection of objects providing information of
VTP authentication mechanism.
 .1.3.6.1.4.1.9.9.46.3.2.29
vtpConfigNotificationsGroupRev1
vtpConfigDigestError vtpConfigRevNumberError vtpVersionOneDeviceDetected vlanTrunkPortDynamicStatusChange
The notifications which a VTP implementation is
required to implement.
 .1.3.6.1.4.1.9.9.46.3.2.30
vtpConfigNotificationsGroup5 deprecated
vtpServerDisabled vtpMtuTooBig
The additional notifications that may be
related to a VTP implementation.
vtpConfigNotificationsGroup5 object is superseded by vtpConfigNotificationsGroup6, vtpConfigNotificationsGroup7.
 .1.3.6.1.4.1.9.9.46.3.2.31
vtpInternalVlanGrp
vtpInternalVlanAllocPolicy vtpInternalVlanOwner
A collection of objects providing information of
internal VLANs.
 .1.3.6.1.4.1.9.9.46.3.2.32
vlanStatsGroup
vlanStatsVlans vlanStatsExtendedVlans vlanStatsInternalVlans vlanStatsFreeVlans
A collection of objects providing VLAN statistics
information in the system.
 .1.3.6.1.4.1.9.9.46.3.2.33
vtpConfigNotificationsGroup6
vtpServerDisabled
The additional notifications that may be
related to a VTP implementation.
 .1.3.6.1.4.1.9.9.46.3.2.34
vtpConfigNotificationsGroup7
vtpMtuTooBig
The additional notifications that may be
related to a VTP implementation.
 .1.3.6.1.4.1.9.9.46.3.2.35
vtpTrunkPruningGroup3
managementDomainPruningStateOper
A collection of objects providing information on
operational VTP pruning state in a manamgement domain.
 .1.3.6.1.4.1.9.9.46.3.2.36
vtpConfigNotificationsGroup8
vtpPruningStateOperChange
The additional notifications for operational
VTP pruning state change in a management domain.
 .1.3.6.1.4.1.9.9.46.3.2.37
vlanTrunkPortActiveVlansGroup
vlanTrunkPortVlansActiveFirst2k vlanTrunkPortVlansActiveSecond2k
A collection of objects providing active vlan
information for a trunking port in a management
domain.
 .1.3.6.1.4.1.9.9.46.3.2.38
vtpSourceInterfaceGroup
managementDomainAdminSrcIf managementDomainSourceOnlyMode managementDomainOperSrcIf
A collection of object providing the preferred source
interface for the VTP IP updater address.
 .1.3.6.1.4.1.9.9.46.3.2.39
vtpConfigFileGroup
managementDomainConfigFile
A collection of object providing the location of VTP
configuration file.
 .1.3.6.1.4.1.9.9.46.3.2.40
vtpVlanLocalShutdownGroup
vtpVlanLocalShutdown
A collection of object providing the VLAN local shutdown
state.
 .1.3.6.1.4.1.9.9.46.3.2.41
vtpLocalUpdaterGroup
managementDomainLocalUpdaterType managementDomainLocalUpdater
A collection of object providing the local updater IP address.
 .1.3.6.1.4.1.9.9.46.3.2.42
vtpDeviceIdGroup
managementDomainDeviceID
A collection of object providing the device id.
 .1.3.6.1.4.1.9.9.46.3.2.43
Compliance Statements (16)

OID .1.3.6.1.4.1.9.9.46.3.1.1
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.2
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroup This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.3
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroup This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpDot1qTunnelGroup This group is mandatory for all the ports which
implement dot1qtunnel feature.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vlanTrunkPortDot1qTunnel readonly
This object is read-only for interface which doesn't
support dot1q tunnel feature.

OID .1.3.6.1.4.1.9.9.46.3.1.4
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroup This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpDot1qTunnelGroup This group is mandatory for all the ports which
implement dot1qtunnel feature.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vlanTrunkPortDot1qTunnel readonly
This object is read-only for interface which doesn't
support dot1q tunnel feature.

OID .1.3.6.1.4.1.9.9.46.3.1.5
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroup This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpDot1qTunnelGroup This group is mandatory for all the ports which
implement dot1qtunnel feature.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vlanTrunkPortDot1qTunnel readonly
This object is read-only for interface which doesn't
support dot1q tunnel feature.

OID .1.3.6.1.4.1.9.9.46.3.1.6
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpDot1qTunnelGroup This group is mandatory for all the ports which
implement dot1qtunnel feature.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.
vlanTrunkPortDot1qTunnel readonly
This object is read-only for interface which doesn't
support dot1q tunnel feature.

OID .1.3.6.1.4.1.9.9.46.3.1.7
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpDot1qTunnelGroup This group is mandatory for all the ports which
implement dot1qtunnel feature.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3). Write access for transparent(3)
is not required.
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.
vlanTrunkPortDot1qTunnel readonly
This object is read-only for interface which doesn't
support dot1q tunnel feature.

OID .1.3.6.1.4.1.9.9.46.3.1.8
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpDot1qTunnelGroup2 This group is mandatory for all the ports which
implement dot1qtunnel feature.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3). Write access for transparent(3)
is not required.
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.9
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3). Write access for transparent(3)
is not required.
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.10
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroup
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3).
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.11
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroupRev1
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3).
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.12
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroupRev1
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
optional vtpInternalVlanGrp Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3).
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.13
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroupRev1
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
optional vtpInternalVlanGrp Implementation of this group is optional.
optional vlanStatsGroup This group is mandatory for agents capable of
providing VLAN statistics information.
optional vtpConfigNotificationsGroup6 Implementation of this group is optional.
optional vtpConfigNotificationsGroup7 Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
managementDomainRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
vlanTrunkPortRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1).
managementDomainName readonly
This object is read-only if vtpVersion
is none(3).
managementDomainLocalMode readonly
Enumeration
client(1), server(2), transparent(3)
This object is read-only if vtpVersion
is none(3).
managementDomainTftpServer readonly
This object is read-only if vtpVersion
is none(3).
managementDomainTftpPathname readonly
This object is read-only if vtpVersion
is none(3).
managementDomainVersionInUse readonly
This object is read-only if vtpVersion
is none(3).
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.14
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroupRev1
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpTrunkPruningGroup Implementation of this group is optional.
optional vtpTrunkPruningGroup2 Implementation of this group is optional.
optional vtpTrunkPortGroup2 Implementation of this group is optional.
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtpTrunkPortGroup3 Implementation of this group is optional.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpConfigNotificationsGroup2 Implementation of this group is optional.
optional vtpConfigNotificationsGroup3 Implementation of this group is optional.
optional vtpConfigNotificationsGroup4 Implementation of this group is optional.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
optional vtpInternalVlanGrp Implementation of this group is optional.
optional vlanStatsGroup This group is mandatory for agents capable of
providing VLAN statistics information.
optional vtpConfigNotificationsGroup6 Implementation of this group is optional.
optional vtpConfigNotificationsGroup7 Implementation of this group is optional.
optional vtpTrunkPruningGroup3 This group is mandatory for devices which
support operational VTP pruning state.
optional vtpConfigNotificationsGroup8 This group is mandatory for devices which
support the notification generation on operational
VTP pruning state change.
Object refinements
ObjectAccessSyntaxDescription
vtpNotificationsEnabled readonly
Write access is not required.
vtpVlanCreatedNotifEnabled readonly
Write access is not required.
vtpVlanDeletedNotifEnabled readonly
Write access is not required.
managementDomainName readonly
Write access is not required.
managementDomainLocalMode readonly
Write access is not required.
managementDomainRowStatus readonly
Write access is not required.
managementDomainTftpServer readonly
Write access is not required.
managementDomainTftpPathname readonly
Write access is not required.
managementDomainPruningState readonly
Write access is not required.
managementDomainVersionInUse readonly
Write access is not required.
vtpInternalVlanAllocPolicy readonly
Write access is not required.
vtpVlanEditOperation readonly
Write access is not required.
vtpVlanEditBufferOwner readonly
Write access is not required.
vtpVlanEditConfigRevNumber readonly
Write access is not required.
vtpVlanEditState readonly
Write access is not required.
vtpVlanEditType readonly
Write access is not required.
vtpVlanEditName readonly
Write access is not required.
vtpVlanEditMtu readonly
Write access is not required.
vtpVlanEditDot10Said readonly
Write access is not required.
vtpVlanEditRingNumber readonly
Write access is not required.
vtpVlanEditBridgeNumber readonly
Write access is not required.
vtpVlanEditStpType readonly
Write access is not required.
vtpVlanEditParentVlan readonly
Write access is not required.
vtpVlanEditRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.

Support for createAndWait and notInService is not required.
vtpVlanEditTranslationalVlan1 readonly
Write access is not required.
vtpVlanEditTranslationalVlan2 readonly
Write access is not required.
vtpVlanEditBridgeType readonly
Write access is not required.
vtpVlanEditAreHopCount readonly
Write access is not required.
vtpVlanEditSteHopCount readonly
Write access is not required.
vtpVlanEditIsCRFBackup readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortVlansEnabled readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vlanTrunkPortRowStatus readonly
Write access is not required.
vlanTrunkPortVlansPruningEligible readonly
Write access is not required.
vlanTrunkPortDynamicState readonly
Write access is not required.
vlanTrunkPortVtpEnabled readonly
Write access is not required.
vlanTrunkPortVlansEnabled2k readonly
Write access is not required.
vlanTrunkPortVlansEnabled3k readonly
Write access is not required.
vlanTrunkPortVlansEnabled4k readonly
Write access is not required.
vtpVlansPruningEligible2k readonly
Write access is not required.
vtpVlansPruningEligible3k readonly
Write access is not required.
vtpVlansPruningEligible4k readonly
Write access is not required.
vlanTrunkPortSetSerialNo readonly
Write access is not required.
vtpDiscoverAction readonly
Write access is not required.
vtpDatabaseLocalMode readonly
Write access is not required.
vtpDatabaseTakeOverPrimary readonly
Write access is not required.
vtpDatabaseTakeOverPassword readonly
Write access is not required.
vtpAuthPassword readonly
Write access is not required.
vtpAuthPasswordType readonly
Write access is not required.
vtpAuthSecretKey readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.15
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroupRev1
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpTrunkPruningGroup Implementation of this group is optional.
optional vtpTrunkPruningGroup2 Implementation of this group is optional.
optional vtpTrunkPortGroup2 Implementation of this group is optional.
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtpTrunkPortGroup3 Implementation of this group is optional.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpConfigNotificationsGroup2 Implementation of this group is optional.
optional vtpConfigNotificationsGroup3 Implementation of this group is optional.
optional vtpConfigNotificationsGroup4 Implementation of this group is optional.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
optional vtpInternalVlanGrp Implementation of this group is optional.
optional vlanStatsGroup This group is mandatory for agents capable of
providing VLAN statistics information.
optional vtpConfigNotificationsGroup6 Implementation of this group is optional.
optional vtpConfigNotificationsGroup7 Implementation of this group is optional.
optional vtpTrunkPruningGroup3 This group is mandatory for devices which
support operational VTP pruning state.
optional vtpConfigNotificationsGroup8 This group is mandatory for devices which
support the notification generation on operational
VTP pruning state change.
optional vlanTrunkPortActiveVlansGroup This group is mandatory for devices capable of
providing active vlans information for trunk
capable ports.
Object refinements
ObjectAccessSyntaxDescription
vtpNotificationsEnabled readonly
Write access is not required.
vtpVlanCreatedNotifEnabled readonly
Write access is not required.
vtpVlanDeletedNotifEnabled readonly
Write access is not required.
managementDomainName readonly
Write access is not required.
managementDomainLocalMode readonly
Write access is not required.
managementDomainRowStatus readonly
Write access is not required.
managementDomainTftpServer readonly
Write access is not required.
managementDomainTftpPathname readonly
Write access is not required.
managementDomainPruningState readonly
Write access is not required.
managementDomainVersionInUse readonly
Write access is not required.
vtpInternalVlanAllocPolicy readonly
Write access is not required.
vtpVlanEditOperation readonly
Write access is not required.
vtpVlanEditBufferOwner readonly
Write access is not required.
vtpVlanEditConfigRevNumber readonly
Write access is not required.
vtpVlanEditState readonly
Write access is not required.
vtpVlanEditType readonly
Write access is not required.
vtpVlanEditName readonly
Write access is not required.
vtpVlanEditMtu readonly
Write access is not required.
vtpVlanEditDot10Said readonly
Write access is not required.
vtpVlanEditRingNumber readonly
Write access is not required.
vtpVlanEditBridgeNumber readonly
Write access is not required.
vtpVlanEditStpType readonly
Write access is not required.
vtpVlanEditParentVlan readonly
Write access is not required.
vtpVlanEditRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.

Support for createAndWait and notInService is not required.
vtpVlanEditTranslationalVlan1 readonly
Write access is not required.
vtpVlanEditTranslationalVlan2 readonly
Write access is not required.
vtpVlanEditBridgeType readonly
Write access is not required.
vtpVlanEditAreHopCount readonly
Write access is not required.
vtpVlanEditSteHopCount readonly
Write access is not required.
vtpVlanEditIsCRFBackup readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortVlansEnabled readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vlanTrunkPortRowStatus readonly
Write access is not required.
vlanTrunkPortVlansPruningEligible readonly
Write access is not required.
vlanTrunkPortDynamicState readonly
Write access is not required.
vlanTrunkPortVtpEnabled readonly
Write access is not required.
vlanTrunkPortVlansEnabled2k readonly
Write access is not required.
vlanTrunkPortVlansEnabled3k readonly
Write access is not required.
vlanTrunkPortVlansEnabled4k readonly
Write access is not required.
vtpVlansPruningEligible2k readonly
Write access is not required.
vtpVlansPruningEligible3k readonly
Write access is not required.
vtpVlansPruningEligible4k readonly
Write access is not required.
vlanTrunkPortSetSerialNo readonly
Write access is not required.
vtpDiscoverAction readonly
Write access is not required.
vtpDatabaseLocalMode readonly
Write access is not required.
vtpDatabaseTakeOverPrimary readonly
Write access is not required.
vtpDatabaseTakeOverPassword readonly
Write access is not required.
vtpAuthPassword readonly
Write access is not required.
vtpAuthPasswordType readonly
Write access is not required.
vtpAuthSecretKey readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.46.3.1.16
The compliance statement for VTP implementations.
Required groups
mandatory vtpBasicGroup
mandatory vtpVlanInfoGroup
mandatory vtpConfigNotificationsGroupRev1
mandatory vtpStatsGroup
mandatory vtpTrunkPortGroup
mandatory vtpVersion2BasicGroup
mandatory vtpNotificationObjectsGroup
optional vtpTrunkPruningGroup Implementation of this group is optional.
optional vtpTrunkPruningGroup2 Implementation of this group is optional.
optional vtpTrunkPortGroup2 Implementation of this group is optional.
optional vtpVlanInfoEditGroup This group must be implemented by VTP Servers.
VTP Clients need not implement these objects, and
must not allow VLANs to be created, modified, or
destroyed using these objects.
optional vtpTrunkPortGroup3 Implementation of this group is optional.
optional vtp4kVlanGroupRev1 This group must be implemented by the VTP Servers
which support the range of VlanIndex between 1024
and 4095.
optional vtpVlanIfIndexGroup This group is an optional group containing
objects providing information about the mapping
of VLAN ID to its corresponding IfIndex.
optional vtpVlanInfoEditGroup2 This group is mandatory for devices which only support
one VLAN editing for each 'apply' operation.
optional vtpVlanNotifEnabledGroup This group is mandatory for devices which support the
notifications/traps in vtpConfigNotificationsGroup3.
optional vtpConfigNotificationsGroup2 Implementation of this group is optional.
optional vtpConfigNotificationsGroup3 Implementation of this group is optional.
optional vtpConfigNotificationsGroup4 Implementation of this group is optional.
optional vtpDiscoverGroup This group is mandatory for devices which support the
VTP discovery.
optional vtpDatabaseGroup This group is mandatory for devices which support the
VTP distribution of different database types.
optional vtpAuthGroup This group is mandatory for devices which support
asymmetric keys authentication mechanism for VTP.
optional vtpInternalVlanGrp Implementation of this group is optional.
optional vlanStatsGroup This group is mandatory for agents capable of
providing VLAN statistics information.
optional vtpConfigNotificationsGroup6 Implementation of this group is optional.
optional vtpConfigNotificationsGroup7 Implementation of this group is optional.
optional vtpTrunkPruningGroup3 This group is mandatory for devices which
support operational VTP pruning state.
optional vtpConfigNotificationsGroup8 This group is mandatory for devices which
support the notification generation on operational
VTP pruning state change.
optional vlanTrunkPortActiveVlansGroup This group is mandatory for devices capable of
providing active VLANs information for trunk
capable ports.
optional vtpSourceInterfaceGroup This group is mandatory for devices which support the
VTP IP updater address preferred source interface.
optional vtpConfigFileGroup This group is mandatory for devices which support the
location of VTP configuration file.
optional vtpVlanLocalShutdownGroup This group is mandatory for devices which support the
vlan local shutdown feature.
optional vtpLocalUpdaterGroup This group is mandatory for devices which support the
local updater IP address feature.
optional vtpDeviceIdGroup This group is mandatory for devices which support the
device identifier used by VTP domain.
Object refinements
ObjectAccessSyntaxDescription
vtpNotificationsEnabled readonly
Write access is not required.
vtpVlanCreatedNotifEnabled readonly
Write access is not required.
vtpVlanDeletedNotifEnabled readonly
Write access is not required.
managementDomainName readonly
Write access is not required.
managementDomainLocalMode readonly
Write access is not required.
managementDomainRowStatus readonly
Write access is not required.
managementDomainTftpServer readonly
Write access is not required.
managementDomainTftpPathname readonly
Write access is not required.
managementDomainPruningState readonly
Write access is not required.
managementDomainVersionInUse readonly
Write access is not required.
vtpInternalVlanAllocPolicy readonly
Write access is not required.
vtpVlanEditOperation readonly
Write access is not required.
vtpVlanEditBufferOwner readonly
Write access is not required.
vtpVlanEditConfigRevNumber readonly
Write access is not required.
vtpVlanEditState readonly
Write access is not required.
vtpVlanEditType readonly
Write access is not required.
vtpVlanEditName readonly
Write access is not required.
vtpVlanEditMtu readonly
Write access is not required.
vtpVlanEditDot10Said readonly
Write access is not required.
vtpVlanEditRingNumber readonly
Write access is not required.
vtpVlanEditBridgeNumber readonly
Write access is not required.
vtpVlanEditStpType readonly
Write access is not required.
vtpVlanEditParentVlan readonly
Write access is not required.
vtpVlanEditRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required.

Support for createAndWait and notInService is not required.
vtpVlanEditTranslationalVlan1 readonly
Write access is not required.
vtpVlanEditTranslationalVlan2 readonly
Write access is not required.
vtpVlanEditBridgeType readonly
Write access is not required.
vtpVlanEditAreHopCount readonly
Write access is not required.
vtpVlanEditSteHopCount readonly
Write access is not required.
vtpVlanEditIsCRFBackup readonly
Write access is not required.
vtpVlanEditTypeExt2 readonly
Write access is not required.
vlanTrunkPortManagementDomain readonly
Write access is not required.
vlanTrunkPortEncapsulationType readonly
Write access is not required.
vlanTrunkPortVlansEnabled readonly
Write access is not required.
vlanTrunkPortNativeVlan readonly
Write access is not required.
vlanTrunkPortRowStatus readonly
Write access is not required.
vlanTrunkPortVlansPruningEligible readonly
Write access is not required.
vlanTrunkPortDynamicState readonly
Write access is not required.
vlanTrunkPortVtpEnabled readonly
Write access is not required.
vlanTrunkPortVlansEnabled2k readonly
Write access is not required.
vlanTrunkPortVlansEnabled3k readonly
Write access is not required.
vlanTrunkPortVlansEnabled4k readonly
Write access is not required.
vtpVlansPruningEligible2k readonly
Write access is not required.
vtpVlansPruningEligible3k readonly
Write access is not required.
vtpVlansPruningEligible4k readonly
Write access is not required.
vlanTrunkPortSetSerialNo readonly
Write access is not required.
vtpDiscoverAction readonly
Write access is not required.
vtpDatabaseLocalMode readonly
Write access is not required.
vtpDatabaseTakeOverPrimary readonly
Write access is not required.
vtpDatabaseTakeOverPassword readonly
Write access is not required.
vtpAuthPassword readonly
Write access is not required.
vtpAuthPasswordType readonly
Write access is not required.
vtpAuthSecretKey readonly
Write access is not required.
managementDomainAdminSrcIf readonly
Write access is not required.
managementDomainConfigFile readonly
Write access is not required.
vtpVlanLocalShutdown readonly
Write access is not required.
Notifications / Traps (12)
NameOIDDescription
vtpConfigRevNumberError
managementDomainConfigRevNumber
.1.3.6.1.4.1.9.9.46.2.0.1
A configuration revision number error notification
signifies that a device has incremented its
vtpConfigRevNumberErrors counter.

Generation of this notification is suppressed if the
vtpNotificationsEnabled has the value 'false'.

The device must throttle the generation of consecutive
vtpConfigRevNumberError notifications so that there is at
least a five-second gap between notification of this type.
When notification are throttled, they are dropped, not
queued for sending at a future time. (Note that
'generating' a notification means sending to all configured
recipients.)
vtpVlanCreated
vtpVlanName
.1.3.6.1.4.1.9.9.46.2.0.10
A vtpVlanCreated notification is generated by a
device when a VLAN is created.
vtpVlanDeleted
vtpVlanName
.1.3.6.1.4.1.9.9.46.2.0.11
A vtpVlanDeleted notification is generated by a
device when a VLAN is deleted.
vtpVlanRingNumberConflict
vtpVlanRingNumber IF-MIBifIndex vtpVlanPortLocalSegment
.1.3.6.1.4.1.9.9.46.2.0.12
A VTP ring number configuration conflict notification is
generated if, and only at the time when, a device learns of
a conflict between:

a) the ring number (vtpVlanPortLocalSegment) being used on a
token ring segment attached to the port identified by
ifIndex, and

b) the VTP-obtained ring number (vtpVlanRingNumber) for the
VLAN identified by vtpVlanIndex.

When such a conflict occurs, the bridge port is put into an
administrative down position until the conflict is resolved
through local/network management intervention.

This notification is only applicable to VLANs of type
'tokenRing'.
vtpPruningStateOperChange
managementDomainPruningStateOper
.1.3.6.1.4.1.9.9.46.2.0.13
A vtpPruningStateOperChange notification is generated
by the device when the instance value of
managementDomainPruningStateOper is changed.
vtpConfigDigestError
managementDomainConfigRevNumber
.1.3.6.1.4.1.9.9.46.2.0.2
A configuration digest error notification signifies that a
device has incremented its vtpConfigDigestErrors counter.

Generation of this notification is suppressed if the
vtpNotificationsEnabled has the value 'false'.

The device must throttle the generation of consecutive
vtpConfigDigestError notifications so that there is at least
a five-second gap between notification of this type. When
notification are throttled, they are dropped, not queued for
sending at a future time. (Note that 'generating' a
notification means sending to all configured recipients.)
vtpServerDisabled
managementDomainConfigRevNumber vtpMaxVlanStorage
.1.3.6.1.4.1.9.9.46.2.0.3
A VTP Server disabled notification is generated when the
local system is no longer able to function as a VTP Server
because the number of defined VLANs is greater than
vtpMaxVlanStorage or the local system is not able to
recover complete VTP information after a reboot.

Generation of this notification is suppressed if the
vtpNotificationsEnabled has the value 'false'.
vtpMtuTooBig
vlanTrunkPortManagementDomain vtpVlanState
.1.3.6.1.4.1.9.9.46.2.0.4
A VTP MTU tooBig notification is generated when a VLAN's
MTU size is larger than can be supported either:

- by one or more of its trunk ports:
the included vtpVlanState has the value
'mtuTooBigForTrunk' and the included
vlanTrunkPortManagementDomain is for the first (or only)
trunk port,
or

- by the device itself:
vtpVlanState has the value 'mtuTooBigForDevice' and any
instance of vlanTrunkPortManagementDomain is included.

Devices which have no trunk ports do not send vtpMtuTooBig
notifications.

Generation of this notification is suppressed if the
vtpNotificationsEnabled has the value 'false'.
vtpVersionOneDeviceDetected
vlanTrunkPortManagementDomain
.1.3.6.1.4.1.9.9.46.2.0.6
A VTP version one device detected notification is
generated by a device when:

a) a management domain has been put into version 2 mode
(as accessed by managementDomainVersionInUse).
b) 15 minutes has passed since a).
c) a version 1 PDU is detected on a trunk on the device
that is in that management domain which has a lower
revision number than the current configuration.
vlanTrunkPortDynamicStatusChange
vlanTrunkPortDynamicStatus
.1.3.6.1.4.1.9.9.46.2.0.7
A vlanTrunkPortDynamicStatusChange notification is
generated by a device when the value of
vlanTrunkPortDynamicStatus object has been changed.
vtpLocalModeChanged
managementDomainLocalMode
.1.3.6.1.4.1.9.9.46.2.0.8
A vtpLocalModeChanged notification is generated
by a device when the value of the object
managementDomainLocalMode is changed.
vtpVersionInUseChanged
managementDomainVersionInUse
.1.3.6.1.4.1.9.9.46.2.0.9
A vtpVersionInUseChanged notification is
generated by a device when the value of the
object managementDomainVersionInUse is
changed.