CISCO-LECS-MIB Table View

The  (conceptual)   table containing  the   interface
specific information   of  the LECS  on   a particular
device and its associated statistics for that interface.

lecsEntry row .1.3.6.1.4.1.9.9.38.1.1.1.1

An entry (conceptual row) in the lecsTable,
containing information of a LECS for a particular
interface. Note that deleting an entry will have the
side effect of deleting corresponding entries in the
…

Indexes

IF-MIBifIndex

Column	Syntax	OID
lecsConfigTableName The textual name used to identify a configuration table in use by the designated LECS. Note that this value must be a reference to an entry in the lecsConfigTblTable.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.38.1.1.1.1.1
lecsUpTime The value of sysUpTime when this entry was created. Note that changing the value of the lecsAdminStatus will not affect the value of this object. This object is only set at row creation time ( whether it is from e…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.38.1.1.1.1.2
lecsInConfigReqs The number of LE_CONFIGURE_REQUESTs that have been received by this LECS on this designated interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.38.1.1.1.1.3
lecsInConfigErrors Then number of packets sent to the LECS from the lower layers but which were not correctly formatted configure requests.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.38.1.1.1.1.4
lecsOutConfigFails The number of LE_CONFIGURE_RESPONSEs sent by this particular LECS whose status was other than success.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.38.1.1.1.1.5
lecsLastFailCause The cause for rejection of the last LE_CONFIGURE_REQUEST. This will be the value of the status field that was sent in the rejection LE_CONFIGURE_RESPONSE. If the config server has never is…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.38.1.1.1.1.6
lecsLastFailLec The ATM address of the LE client whose last configuration request was rejected. This ATM address will be for the LE client who was delivered the last LE_CONFIGURE_RESPONSE that caused the lec…	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.38.1.1.1.1.7
lecsOperStatus This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the corresponding l…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.38.1.1.1.1.8
lecsAdminStatus The desired state of the LECS on this interface as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lecsOperStatus.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.38.1.1.1.1.9
lecsStatus The status object for the lecsEntry. Note that the lecsConfigTableName must be specified at row creation time.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.1.1.1.10
lecsMasterState An indication of whether the LECS is acting as the operative master or is a redundant slave.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.38.1.1.1.1.11

A  (conceptual)  table of ATM   addresses which are
listened to by LECSs on this device.

lecsAtmAddrEntry row .1.3.6.1.4.1.9.9.38.1.1.2.1

An entry (conceptual row) that denotes an ATM
address, on a particular interface, that a LECS
listens on. Note that an entry in the lecsTable must
exist for the corresponding ifIndex first before any
A…

Indexes

IF-MIBifIndex lecsAtmAddrIndex

Column	Syntax	OID
lecsAtmAddrIndex An arbitrary number that uniquely corresponds to a value of lecsAtmAddrActual for a designated interface. Note that lecsAtmAddrActual could not be used for the index since it may not be known at the time of row c…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.38.1.1.2.1.1
lecsAtmAddrSpec An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the LECS on the designated interface will use to accept configure re…	LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.38.1.1.2.1.2
lecsAtmAddrMask A bit mask signifying what portion of the specified ATM address is relevant. If the ATM address is not specified (i.e. at row creation time), then this object defaults to all zeros (no portion of the l…	OctetStringr/w Constraints: range: 20-20 range: 0-0	.1.3.6.1.4.1.9.9.38.1.1.2.1.3
lecsAtmAddrActual The resulting address that the LECS is accepting configuration requests on for the designated interface. This address is the result of the specified ATM address, its mask and interaction t…	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.38.1.1.2.1.4
lecsAtmAddrState Once a (conceptual) row is created, the LECS, if active, goes about interacting through ILMI and registering the address with the switch. The value of this object denote what phase the current address is i…	Enumeration Enumerated Values: 1 actualValueInvalid 2 actualValueValid 3 registeredWithSignalling 4 regSigAndValid 5 registeredWithIlmi 6 regIlmiAndValid 7 regSigandIlmi 8 regSigIlmiAndValid	.1.3.6.1.4.1.9.9.38.1.1.2.1.5
lecsAtmAddrStatus The status object for the lecsAtmAddrTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.1.2.1.6

This (conceptual)   table allows a  manager  to view
what LE   clients  have established   configure direct
connections to the LECS over the designated interface.

lecsConfigDirectConnEntry row .1.3.6.1.4.1.9.9.38.1.1.3.1

An entry (conceptual row) that denotes a connection
to the LECS in the form of a configure direct. It is
important to note that the lecsConfigDirectConnSrc and
lecsConfigDirectConnDst are only significant when the
V…

Indexes

IF-MIBifIndex lecsConfigDirectConnVpi lecsConfigDirectConnVci

Column	Syntax	OID
lecsConfigDirectConnVpi The virtual path identifier of the designated connection to the LECS.	LAN-EMULATION-CLIENT-MIBVpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.38.1.1.3.1.1
lecsConfigDirectConnVci The virtual channel identifier of the designated connection to the LECS.	LAN-EMULATION-CLIENT-MIBVciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.38.1.1.3.1.2
lecsConfigDirectConnVCType The type of virtual connection that the designated configure direct uses. If this object has the value 'pvc' then the lecsConfigDirectConnSrc and lecsConfigDirectConnDst will not be instantiated.	Enumeration Enumerated Values: 1 pvc 2 svc	.1.3.6.1.4.1.9.9.38.1.1.3.1.3
lecsConfigDirectConnSrc The calling party ID if the VC is a SVC. If the VC is a PVC then this object shall not be instantiated for the designated VC.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.38.1.1.3.1.4
lecsConfigDirectConnDst The address that was used by the requesting LEC to make the designated connection. The called party ID if the VC is a SVC. If the VC is a PVC then this object shall not be instantiated for the designated VC.	LAN-EMULATION-CLIENT-MIBAtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.38.1.1.3.1.5
lecsConfigDirectDstType The type of entity on the other end of the VC.	Enumeration Enumerated Values: 1 laneClient 2 laneServer 3 laneConfig 4 unknown	.1.3.6.1.4.1.9.9.38.1.1.3.1.6

A (conceptual)   table of the   configuration tables
in existence  on the device. Note   that an entry must
exist in this   table before it  can  be used in  the 
lecsTable, lecsElanConfigTable, lecsMacConfigTable  or
lecsAtmAddrConfigTable.

lecsConfigTblEntry row .1.3.6.1.4.1.9.9.38.1.2.1.1

An entry (conceptual row) that denotes a
configuration table, potentially accessible by a LECS.

Indexes

lecsConfigTblName

Column	Syntax	OID
lecsConfigTblName The textual name used to identify a configuration table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.38.1.2.1.1.1
lecsConfigTblDefaultElanName The ELAN name assigned to LE clients who do not specify what ELAN they wish to join when issuing a configuration request. It is important to understand when the default ELAN name will be used. If the LEC sp…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.38.1.2.1.1.2
lecsConfigTblStatus The status object associated with the designated entry. Note that a value for lecsConfigTblDefaultElanName cannot be specified at row creation time (as it points to an entry in the l…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.2.1.1.3

A  (conceptual)  configuration table that represents
the names  of  the ELANs   known to  a LECS  and their
corresponding LES ATM addresses.

lecsElanConfigEntry row .1.3.6.1.4.1.9.9.38.1.2.2.1

An entry (conceptual row) in the ELAN configuration
table representing a mapping from an ELAN name to a
LES ATM address. Note that a value of ELAN name must
exist in this table before it can be used within the
l…

Indexes

lecsConfigTblName lecsElanConfigName

Column	Syntax	OID
lecsElanConfigName The name assigned to an ELAN in this configuration entry.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.38.1.2.2.1.1
lecsElanLesAtmAddr The ATM address of the LES associated with the ELAN of this entry.	LAN-EMULATION-CLIENT-MIBAtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.9.9.38.1.2.2.1.2
lecsElanAccess The access of the ELAN to configure requests. A 'closed' ELAN (similar to a closed user group) is prevented from being used as the default ELAN and also may not be asked for in the LE_CONFIGURE_REQUEST sol…	Enumerationr/w Enumerated Values: 1 open 2 closed	.1.3.6.1.4.1.9.9.38.1.2.2.1.3
lecsElanConfigStatus This object can only be set to active once a valid value of lecsElanLesAtmAddr is filled in.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.2.2.1.4
lecsElanSegmentId The Segment Id for Token Ring ELANs associated with this ELAN. A value of zero indicates that a ring number is not applicable to this ELAN.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.38.1.2.2.1.5

A   (conceptual) table utilized by a   LECS to map a
registered MAC address of a LEC to an ELAN name.  This
table is used be the LECS to  assign a LEC to an ELAN.
It  is, however, not  mandatory  for all  configurable
LECs to be in  this table as they  may opt to use  the
lecsAtmAddrConfigTable instead  or perhaps rely on the
default ELAN set in the lecsConfigTblTable.  Also note
that  a  LES may  opt to use  this table  to determine
authorization of a LEC to join an ELAN.

lecsMacConfigEntry row .1.3.6.1.4.1.9.9.38.1.2.3.1

An entry (conceptual row) of a mapping between a MAC
address in primary utilization by a LEC and an ELAN
name.

Indexes

lecsConfigTblName lecsMacConfigAddress

Column	Syntax	OID
lecsMacConfigAddress The MAC address of a to be associated with an ELAN name.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.38.1.2.3.1.1
lecsMacConfigElanName An ELAN name that will be returned to a LEC that provides the corresponding MAC address in a configuration request. Note that only ELAN names within the lecsElanConfigTable are acceptable values f…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.38.1.2.3.1.2
lecsMacConfigLastUsed The value of sysUpTime when this entry was last used to map a MAC address to an ELAN name. Managers may opt to use this object to garbage collect entries that have not been used for a prolonged period of time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.38.1.2.3.1.3
lecsMacConfigStatus The row cannot be set to 'active' until an appropiate value exists for lecsMacConfigElanName. This may be provided by the agent if there exists a value for the lecsConfigTblDefaultElanName for the de…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.2.3.1.4

This (conceptual) table is  used by the LECS to  map
between an ATM address of a LEC and ELAN name.

lecsAtmAddrConfigEntry row .1.3.6.1.4.1.9.9.38.1.2.4.1

An entry (conceptual row) of the config table that
maps between an ATM address of a LEC and ELAN name.

Indexes

lecsConfigTblName lecsAtmAddrConfigAddress lecsAtmAddrConfigMask

Column	Syntax	OID
lecsAtmAddrConfigAddress An ATM Address of a LEC that when combined with an address mask is used to determine which ELAN the LE client should belong to.	OctetString Constraints: range: 20-20	.1.3.6.1.4.1.9.9.38.1.2.4.1.1
lecsAtmAddrConfigMask An ATM address mask associated with the LEC ATM address of this entry. Bits in this mask that are set to zero indicate that corresponding bit locations in the comparison ATM address are to be ignored for the pu…	OctetString Constraints: range: 20-20	.1.3.6.1.4.1.9.9.38.1.2.4.1.2
lecsAtmAddrConfigElanName The ELAN name to be returned to a configure request that has specified an ATM address that matches the address/mask pair in this entry. Note that only ELAN names within the lecsElanConfigTable are acceptable v…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.38.1.2.4.1.3
lecsAtmAddrLastUsed The value of sysUpTime corresponding to the time this entry was last used. The manager may opt to use this object to garbage collect entries that have not been used for a prolonged period of time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.38.1.2.4.1.4
lecsAtmAddrConfigStatus The status of this entry (conceptual) row in the lecsAtmAddrConfigTable. The row cannot be set to 'active' until an appropiate value exists for lecsAtmAddrConfigElanName. This may be provided by the a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.2.4.1.5

A table of LESs servicing an ELAN.

lecsLesConfigEntry row .1.3.6.1.4.1.9.9.38.1.2.5.1

An entry (conceptual row) in the
lecsLesConfigTable.

Indexes

lecsConfigTblName lecsElanConfigName lecsLesAtmAddr

Column	Syntax	OID
lecsLesAtmAddr The ATM address of a LES configured to service this ELAN.	OctetString Constraints: range: 20-20	.1.3.6.1.4.1.9.9.38.1.2.5.1.1
lecsLesPriority The relative priority of the LES. The lower this number the more priority is given the LES for servicing the ELAN. Such that a higher priority LES will supersede operation of the ELAN in the presence of a lower priori…	Integer32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.9.9.38.1.2.5.1.2
lecsLesConnState The present state of the given LES. The active(1) LES is servicing the ELAN, inactive(2) LESs are connected but not accepting joins, not-connected(3) LESs are not accounted for.	Enumeration Enumerated Values: 1 active 2 inactive 3 notConnected	.1.3.6.1.4.1.9.9.38.1.2.5.1.3
lecsLesConfigStatus The status of the conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.2.5.1.4

A   (conceptual) table utilized by a   LECS to map a
registered Route Descriptor of a LEC to an ELAN name.
This table is used by the LECS to  assign a LEC to an
ELAN.  It  is, however, not  mandatory  for all
configurable LECs to be in  this table as they  may
opt to use the lecsAtmAddrConfigTable or
lecsMacConfigTable instead  or perhaps rely on the 
default ELAN set in the lecsConfigTblTable.  Also note
that  a  LES may  opt to use  this table  to determine
authorization of a LEC to join an ELAN.

lecsRDConfigEntry row .1.3.6.1.4.1.9.9.38.1.2.6.1

An entry (conceptual row) of a mapping between a
Route Descriptor in primary utilization by a LEC and
an ELAN name.

Indexes

lecsConfigTblName lecsRDConfigSegmentId lecsRDConfigBridgeNum

Column	Syntax	OID
lecsRDConfigSegmentId The Segment ID in a Route Descriptor provided by a LEC during configuration.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.38.1.2.6.1.1
lecsRDConfigBridgeNum The Bridge Number in a Route Descriptor provided by a LEC during configuration.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.9.9.38.1.2.6.1.2
lecsRDConfigElanName An ELAN name that will be returned to a LEC that provides the corresponding Route Descriptor in a configuration request. Note that only ELAN names within the lecsElanConfigTable are acceptable values f…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.38.1.2.6.1.3
lecsRDConfigLastUsed The value of sysUpTime when this entry was last used to map a Route Descriptor to an ELAN name. Managers may opt to use this object to garbage collect entries that have not been used for a prolonged period of time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.38.1.2.6.1.4
lecsRDConfigStatus The row cannot be set to 'active' until an appropiate value exists for lecsRDConfigElanName. This may be provided by the agent if there exists a value for the lecsConfigTblDefaultElanName for the des…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.38.1.2.6.1.5