CISCO-DOT11-HT-MAC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
26

cD11HtMacStationConfigTable

table
.1.3.6.1.4.1.9.9.626.1.1.1 · 1 row entry · 14 columns
Open in standard view 
This table represents the MAC configuration
parameters of 802.11n interfaces.
          
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7).
cD11HtMacStationConfigEntry entry .1.3.6.1.4.1.9.9.626.1.1.1.1
Each Entry represents a conceptual row in
ccD11HtMacStationConfigTable and corresponds to
the MAC configuration parameters of an 802.11n
interface.
Indexes
IF-MIBifIndex
Column Syntax OID
cD11HtMacOperationalMCSSet
This object represents the set of MCS at which the
station may transmit data. Each bit represents an
MCS index and corresponds to a particular data rate.
Each MCS shall be within the range from 0 to 127, and
shall be…
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.9.626.1.1.1.1.1
cD11HtMacMIMOPowerSave
This object represents the operational power save
state of MIMO. The semantics are defined as follows.

'static' - The dot11 interface is operating in static
MIMO Power Save mode and hence, other stations…
Enumeration
Enumerated Values:
1static
2dynamic
3mimo
 .1.3.6.1.4.1.9.9.626.1.1.1.1.2
cD11HtMacNDelayedBlockAckImplemented
This object, when 'true', indicates that the
dot11 interface supports the No-Ack option of the
Delayed Block Acknowledgement.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.3
cD11HtMacMaxAMSDULength
This object represents the supported maximum size of
A-MSDU.

'amsduSize3839' - This indicates a maximum size of
3839 octets.

'amsduSize7935' - This indicates a maximum size of
7935 octets.
Enumeration
Enumerated Values:
3839amsduSize3839
7935amsduSize7935
 .1.3.6.1.4.1.9.9.626.1.1.1.1.4
cD11HtMacPSMPImplemented
This object, when 'true', indicates that the dot11
interface is capable of supporting PSMP.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.5
cD11HtMacSTBCControlFrameImplemented
This object, when 'true', indicates that the dot11
interface is capable of processing the received STBC
control frames.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.6
cD11HtMacLsigTxOpProtectImplemented
This object, when 'true', indicates that the dot11
interface is capable of supporting L-SIG TXOP
Protection option.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.7
cD11HtMacMaxRxAMPDUFactor
This object is used to compute the maximum length
of the A-MPDU the STA can receive, as follows.

maximum length of A-MPDU in octets =
2 ^ ( 13 + cD11HtMacMaxRxAMPDUFactor ) -1.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.9.9.626.1.1.1.1.8
cD11HtMacMPDUDensity
This object represents the minimum time between the
start of adjacent MPDUs within an A-MPDU. This time
is measured at the PHY service access-point; the
number of bytes between the start of two consecutive
MPDUs in A-M…
Enumeration
Enumerated Values:
1noTimeRestriction
2oneEighth
3oneFourth
4half
5one
6two
7four
8eight
 .1.3.6.1.4.1.9.9.626.1.1.1.1.9
cD11HtMacPCOImplemented
This object, when 'true', indicates that the dot11
interface is capable of supporting Phased coexistence
operation.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.10
cD11HtMacTransitionTime
This object indicates that the minimum transition
time within which the STA can switch between 20 MHz
channel width and 40 MHz channel width with a high
probability.
microsecondsEnumeration
Enumerated Values:
400fourHundred
1500oneThousandFiveHundred
5000fiveThousand
 .1.3.6.1.4.1.9.9.626.1.1.1.1.11
cD11HtMacMCSFeedbackImplemented
This object indicates the MCS feedback
capability supported on this 802.11n interface.
The semantics are as follows.

'none' - The station does not provide MCS feedback
through this interface.
…
Enumeration
Enumerated Values:
1none
2unsolicited
3both
 .1.3.6.1.4.1.9.9.626.1.1.1.1.12
cD11HtMacAMSDUEnable
This object represents whether this 802.11n radio
can transmit / receive A-MSDUs.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.13
cD11HtMacAMPDUEnable
This object represents whether this 802.11n radio
can transmit / receive A-MPDUs.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.1.1.1.14

cD11HtMacOperationTable

table
.1.3.6.1.4.1.9.9.626.1.2.1 · 1 row entry · 12 columns
Open in standard view 
This table represents the operational parameters
of 802.11n interfaces.
          
Entries in this table are created automatically
by the agent corresponding to each 802.11n
interface.
          
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7).
cD11HtMacOperationEntry entry .1.3.6.1.4.1.9.9.626.1.2.1.1
A conceptual row in cD11HtMacOperationTable and
represents the operational parameters of an 802.11n
interface.
Indexes
IF-MIBifIndex
Column Syntax OID
cD11HtMacOperatingMode
This object represents the level of protection to be
provided to the data transmissions of 802.11n radios.
The semantics are as follows.

'pureHt' - No protection will be provided to the
high throughput tr…
Enumerationr/w
Enumerated Values:
1pureHt
2optionalProtection
3mandatoryFortyProtection
4mandatoryAllProtection
 .1.3.6.1.4.1.9.9.626.1.2.1.1.1
cD11HtMacRIFSMode
This object, when set to 'true', indicates that RIFS mode
is allowed in the BSS.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.2.1.1.2
cD11HtMacPSMPControlledAccess
This object, when set to 'true', indicates that the AP
accepts associations only from PSMP-enabled clients.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.2.1.1.3
cD11HtMacServiceIntervalGranularity
This object represents the service interval
granularity to be used for scheduled PSMP. The value
of the granularity is given by
(cD11HtMacServiceIntervalGranularity+1)*5
milliseconds.
millisecondsInteger32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.9.9.626.1.2.1.1.4
cD11HtMacDualCTSProtection
This object, when set to 'true', indicates that the AP
uses dual CTS protection to protect the regular and the
STBC transmissions.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.2.1.1.5
cD11HtMacLSigTxOpFullProtectionEnabled
This object, when set to 'true', indicates that the
LSIG-TXOP Protection is currently enabled on the
AP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.2.1.1.6
cD11HtMacNonGFEntitiesPresent
This object, when set to 'true', indicates that
Non-GreenField clients are present in the BSS.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.2.1.1.7
cD11HtMacPCOActivated
This object, when set to 'true', indicates that the
PCO is activated.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.626.1.2.1.1.8
cD11HtMacPCO20MaxDuration
This object represents the maximum duration of
20 MHz phase in TU under PCO operation. The value of
this object shall be equal to or larger than
cD11HtMacPCO20MinDuration.
TUInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.626.1.2.1.1.9
cD11HtMacPCO40MaxDuration
This object represents the maximum duration
of 40 MHz phase in TU under PCO operation. The
value of this object shall be equal to or larger
than cD11HtMacPCO40MinDuration.
TUInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.626.1.2.1.1.10
cD11HtMacPCO20MinDuration
This object represents the minimum duration of
20 MHz phase in TU under PCO operation.
TUInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.626.1.2.1.1.11
cD11HtMacPCO40MinDuration
This object represents the minimum duration of
40 MHz phase in TU under PCO operation.
TUInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.626.1.2.1.1.12