cD11HtMacMCSFeedbackImplemented

CISCO-DOT11-HT-MAC-MIB · .1.3.6.1.4.1.9.9.626.1.1.1.1.12
MIB view Table view

Object

column Enumeration 
This object indicates the MCS feedback
capability supported on this 802.11n interface.
The semantics are as follows.
              
'none' - The station does not provide MCS feedback
through this interface.
              
'unsolicited' - The station provides only
unsolicited MCS feedback.
              
'both'  - The station provides both solicited as
well as unsolicited MCS feedback.

Context

MIB
CISCO-DOT11-HT-MAC-MIB
OID
.1.3.6.1.4.1.9.9.626.1.1.1.1.12
Type
column
Access
readonly
Status
current
Parent
cD11HtMacStationConfigEntry
Table
cD11HtMacStationConfigTable
Siblings
13

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2unsolicited
3both

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cD11HtMacOperationalMCSSet
This object represents the set of MCS at which the station may transmit data. Each bit represents an MCS index and corresponds to a particular data rate. Each MCS shall be with…
columnOctetString.1.3.6.1.4.1.9.9.626.1.1.1.1.1
cD11HtMacPCOImplemented
This object, when 'true', indicates that the dot11 interface is capable of supporting Phased coexistence operation.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.10
cD11HtMacTransitionTime
This object indicates that the minimum transition time within which the STA can switch between 20 MHz channel width and 40 MHz channel width with a high probability.
columnmicroseconds Enumeration.1.3.6.1.4.1.9.9.626.1.1.1.1.11
cD11HtMacAMSDUEnable
This object represents whether this 802.11n radio can transmit / receive A-MSDUs.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.13
cD11HtMacAMPDUEnable
This object represents whether this 802.11n radio can transmit / receive A-MPDUs.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.14
cD11HtMacMIMOPowerSave
This object represents the operational power save state of MIMO. The semantics are defined as follows. 'static' - The dot11 interface is operating in static MIMO P…
columnEnumeration.1.3.6.1.4.1.9.9.626.1.1.1.1.2
cD11HtMacNDelayedBlockAckImplemented
This object, when 'true', indicates that the dot11 interface supports the No-Ack option of the Delayed Block Acknowledgement.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.3
cD11HtMacMaxAMSDULength
This object represents the supported maximum size of A-MSDU. 'amsduSize3839' - This indicates a maximum size of 3839 octets. 'amsduSize7935' - This i…
columnEnumeration.1.3.6.1.4.1.9.9.626.1.1.1.1.4
cD11HtMacPSMPImplemented
This object, when 'true', indicates that the dot11 interface is capable of supporting PSMP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.5
cD11HtMacSTBCControlFrameImplemented
This object, when 'true', indicates that the dot11 interface is capable of processing the received STBC control frames.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.6
cD11HtMacLsigTxOpProtectImplemented
This object, when 'true', indicates that the dot11 interface is capable of supporting L-SIG TXOP Protection option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.626.1.1.1.1.7
cD11HtMacMaxRxAMPDUFactor
This object is used to compute the maximum length of the A-MPDU the STA can receive, as follows. maximum length of A-MPDU in octets = 2 ^ ( 13 + cD11HtMacMaxRx…
columnInteger32.1.3.6.1.4.1.9.9.626.1.1.1.1.8
cD11HtMacMPDUDensity
This object represents the minimum time between the start of adjacent MPDUs within an A-MPDU. This time is measured at the PHY service access-point; the number of bytes between t…
columnEnumeration.1.3.6.1.4.1.9.9.626.1.1.1.1.9