cD11HtMacServiceIntervalGranularity
CISCO-DOT11-HT-MAC-MIB ·
.1.3.6.1.4.1.9.9.626.1.2.1.1.4
Object
column
r/w
milliseconds Integer32
This object represents the service interval granularity to be used for scheduled PSMP. The value of the granularity is given by (cD11HtMacServiceIntervalGranularity+1)*5 milliseconds.
Context
- MIB
- CISCO-DOT11-HT-MAC-MIB
- OID
.1.3.6.1.4.1.9.9.626.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- cD11HtMacOperationEntry
- Table
- cD11HtMacOperationTable
- Siblings
- 11
Syntax
milliseconds Integer32
Values & Constraints
Object Constraints
range: 0-7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cD11HtMacOperatingMode This object represents the level of protection to be
provided to the data transmissions of 802.11n radios.
The semantics are as follows.
'pureHt' - No protection wi… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.2.1.1.1 |
| cD11HtMacPCO40MaxDuration This object represents the maximum duration
of 40 MHz phase in TU under PCO operation. The
value of this object shall be equal to or larger
than cD11HtMacPCO40MinDuration. | column | TU Integer32 | .1.3.6.1.4.1.9.9.626.1.2.1.1.10 |
| cD11HtMacPCO20MinDuration This object represents the minimum duration of
20 MHz phase in TU under PCO operation. | column | TU Integer32 | .1.3.6.1.4.1.9.9.626.1.2.1.1.11 |
| cD11HtMacPCO40MinDuration This object represents the minimum duration of
40 MHz phase in TU under PCO operation. | column | TU Integer32 | .1.3.6.1.4.1.9.9.626.1.2.1.1.12 |
| cD11HtMacRIFSMode This object, when set to 'true', indicates that RIFS mode
is allowed in the BSS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.2.1.1.2 |
| cD11HtMacPSMPControlledAccess This object, when set to 'true', indicates that the AP
accepts associations only from PSMP-enabled clients. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.2.1.1.3 |
| cD11HtMacDualCTSProtection This object, when set to 'true', indicates that the AP
uses dual CTS protection to protect the regular and the
STBC transmissions. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.2.1.1.5 |
| cD11HtMacLSigTxOpFullProtectionEnabled This object, when set to 'true', indicates that the
LSIG-TXOP Protection is currently enabled on the
AP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.2.1.1.6 |
| cD11HtMacNonGFEntitiesPresent This object, when set to 'true', indicates that
Non-GreenField clients are present in the BSS. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.2.1.1.7 |
| cD11HtMacPCOActivated This object, when set to 'true', indicates that the
PCO is activated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.2.1.1.8 |
| cD11HtMacPCO20MaxDuration This object represents the maximum duration of
20 MHz phase in TU under PCO operation. The value of
this object shall be equal to or larger than
cD11HtMacPCO20MinDuration. | column | TU Integer32 | .1.3.6.1.4.1.9.9.626.1.2.1.1.9 |