cD11HtMacAMPDUEnable
CISCO-DOT11-HT-MAC-MIB ·
.1.3.6.1.4.1.9.9.626.1.1.1.1.14
Object
This object represents whether this 802.11n radio can transmit / receive A-MPDUs.
Context
- MIB
- CISCO-DOT11-HT-MAC-MIB
- OID
.1.3.6.1.4.1.9.9.626.1.1.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cD11HtMacStationConfigEntry
- Table
- cD11HtMacStationConfigTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cD11HtMacOperationalMCSSet This object represents the set of MCS at which the
station may transmit data. Each bit represents an
MCS index and corresponds to a particular data rate.
Each MCS shall be with… | column | OctetString | .1.3.6.1.4.1.9.9.626.1.1.1.1.1 |
| cD11HtMacPCOImplemented This object, when 'true', indicates that the dot11
interface is capable of supporting Phased coexistence
operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.10 |
| cD11HtMacTransitionTime This object indicates that the minimum transition
time within which the STA can switch between 20 MHz
channel width and 40 MHz channel width with a high
probability. | column | microseconds Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.11 |
| cD11HtMacMCSFeedbackImplemented This object indicates the MCS feedback
capability supported on this 802.11n interface.
The semantics are as follows.
'none' - The station does not provide MCS feedb… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.12 |
| cD11HtMacAMSDUEnable This object represents whether this 802.11n radio
can transmit / receive A-MSDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.13 |
| cD11HtMacMIMOPowerSave This object represents the operational power save
state of MIMO. The semantics are defined as follows.
'static' - The dot11 interface is operating in static
MIMO P… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.2 |
| cD11HtMacNDelayedBlockAckImplemented This object, when 'true', indicates that the
dot11 interface supports the No-Ack option of the
Delayed Block Acknowledgement. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.3 |
| cD11HtMacMaxAMSDULength This object represents the supported maximum size of
A-MSDU.
'amsduSize3839' - This indicates a maximum size of
3839 octets.
'amsduSize7935' - This i… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.4 |
| cD11HtMacPSMPImplemented This object, when 'true', indicates that the dot11
interface is capable of supporting PSMP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.5 |
| cD11HtMacSTBCControlFrameImplemented This object, when 'true', indicates that the dot11
interface is capable of processing the received STBC
control frames. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.6 |
| cD11HtMacLsigTxOpProtectImplemented This object, when 'true', indicates that the dot11
interface is capable of supporting L-SIG TXOP
Protection option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.7 |
| cD11HtMacMaxRxAMPDUFactor This object is used to compute the maximum length
of the A-MPDU the STA can receive, as follows.
maximum length of A-MPDU in octets =
2 ^ ( 13 + cD11HtMacMaxRx… | column | Integer32 | .1.3.6.1.4.1.9.9.626.1.1.1.1.8 |
| cD11HtMacMPDUDensity This object represents the minimum time between the
start of adjacent MPDUs within an A-MPDU. This time
is measured at the PHY service access-point; the
number of bytes between t… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.9 |