cD11HtMacOperationalMCSSet
CISCO-DOT11-HT-MAC-MIB ·
.1.3.6.1.4.1.9.9.626.1.1.1.1.1
Object
column
r/w
OctetString
This object represents the set of MCS at which the
station may transmit data. Each bit represents an
MCS index and corresponds to a particular data rate.
Each MCS shall be within the range from 0 to 127, and
shall be supported for receiving data.
This value is reported in transmitted Beacon, Probe
Request, Probe Response, Association Request,
Association Response, Reassociation Request and
Reassociation Response frames and is used to
indicate which MCS values shall be supported by all the
devices in the BSS. When this object is zeroed, it
indicates that the other stations in the BSS shall use
legacy data rates.
Context
- MIB
- CISCO-DOT11-HT-MAC-MIB
- OID
.1.3.6.1.4.1.9.9.626.1.1.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cD11HtMacStationConfigEntry
- Table
- cD11HtMacStationConfigTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cD11HtMacPCOImplemented This object, when 'true', indicates that the dot11
interface is capable of supporting Phased coexistence
operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.10 |
| cD11HtMacTransitionTime This object indicates that the minimum transition
time within which the STA can switch between 20 MHz
channel width and 40 MHz channel width with a high
probability. | column | microseconds Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.11 |
| cD11HtMacMCSFeedbackImplemented This object indicates the MCS feedback
capability supported on this 802.11n interface.
The semantics are as follows.
'none' - The station does not provide MCS feedb… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.12 |
| cD11HtMacAMSDUEnable This object represents whether this 802.11n radio
can transmit / receive A-MSDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.13 |
| cD11HtMacAMPDUEnable This object represents whether this 802.11n radio
can transmit / receive A-MPDUs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.14 |
| cD11HtMacMIMOPowerSave This object represents the operational power save
state of MIMO. The semantics are defined as follows.
'static' - The dot11 interface is operating in static
MIMO P… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.2 |
| cD11HtMacNDelayedBlockAckImplemented This object, when 'true', indicates that the
dot11 interface supports the No-Ack option of the
Delayed Block Acknowledgement. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.3 |
| cD11HtMacMaxAMSDULength This object represents the supported maximum size of
A-MSDU.
'amsduSize3839' - This indicates a maximum size of
3839 octets.
'amsduSize7935' - This i… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.4 |
| cD11HtMacPSMPImplemented This object, when 'true', indicates that the dot11
interface is capable of supporting PSMP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.5 |
| cD11HtMacSTBCControlFrameImplemented This object, when 'true', indicates that the dot11
interface is capable of processing the received STBC
control frames. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.6 |
| cD11HtMacLsigTxOpProtectImplemented This object, when 'true', indicates that the dot11
interface is capable of supporting L-SIG TXOP
Protection option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.626.1.1.1.1.7 |
| cD11HtMacMaxRxAMPDUFactor This object is used to compute the maximum length
of the A-MPDU the STA can receive, as follows.
maximum length of A-MPDU in octets =
2 ^ ( 13 + cD11HtMacMaxRx… | column | Integer32 | .1.3.6.1.4.1.9.9.626.1.1.1.1.8 |
| cD11HtMacMPDUDensity This object represents the minimum time between the
start of adjacent MPDUs within an A-MPDU. This time
is measured at the PHY service access-point; the
number of bytes between t… | column | Enumeration | .1.3.6.1.4.1.9.9.626.1.1.1.1.9 |