CISCO-CLASS-BASED-QOS-MIB Table View

This table describes the logical interfaces/media types
and the policymap that are attached to it.

cbQosServicePolicyEntry row .1.3.6.1.4.1.9.9.166.1.1.1.1

Each entry in this table describes to which a logical
interface a given policymap is attached. Depending on
the logical interface/media type, some fields may have
meaningful values, and some may not. Please see each
…

Indexes

cbQosPolicyIndex

Column	Syntax	OID
cbQosPolicyIndex An arbitrary (system-assigned) index for all service policies (PolicyMap that has been attached to a given logical interface).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.1.1.1.1
cbQosIfType This describes the logical interface/media type to which this service policy is attached.	InterfaceType Type Values: 1 mainInterface 2 subInterface 3 frDLCI 4 atmPVC 5 controlPlane 6 vlanPort 7 evc 8 tunnel 9 wirelessInterface	.1.3.6.1.4.1.9.9.166.1.1.1.1.2
cbQosPolicyDirection This indicates the direction of traffic for which this service policy is applied.	TrafficDirection Type Values: 1 input 2 output	.1.3.6.1.4.1.9.9.166.1.1.1.1.3
cbQosIfIndex ifIndex for the interface to which this service is attached. This field makes sense only if the logical interface has a snmp ifIndex. For e.g. the value of this field is meaningless when the cbQosIfType is controlPlane.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.166.1.1.1.1.4
cbQosFrDLCI DLCI for the FRVC to which this service is attached. This field only make sense if the service policy is attached to a Frame Relay DLCI.	CISCO-FRAME-RELAY-MIBDlciNumber Type Constraints: range: 0..1023	.1.3.6.1.4.1.9.9.166.1.1.1.1.5
cbQosAtmVPI VPI for the ATMVC to which this service is attached. This field only make sense if the service policy is attached to a ATM VC.	Unsigned32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.166.1.1.1.1.6
cbQosAtmVCI VCI for the ATMVC to which this service is attached. This field only make sense if the service policy is attached to a ATM VC.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.166.1.1.1.1.7
cbQosEntityIndex In cases where the policy is attached to an entity e.g. control-plane, this object represents the entity physical index of the entity to which the policy has been attached. A value zero may be returned if the policy is…	CISCO-TCEntPhysicalIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.166.1.1.1.1.8
cbQosVlanIndex If the service policy is attached to a particular vlan on a trunk or multi-vlan access port, then this object specifies the corresponding VLAN. In all other cases the value of this object is '0'.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.9.9.166.1.1.1.1.9
cbQosEVC for the EVC to which this service is attached. This field only make sense if the service policy is attached to an EVC.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.1.1.1.10
cbQosPolicyDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more objects of cbQosServicePolicyEntry table for a given instance suffered a discontinuity. If no such discontinuities have occurred since the last…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.166.1.1.1.1.11
cbQosParentPolicyIndex The value refering to service-policy index of a virtual interface on which PolicyMap applied directly. Value set would imply the entry is for a physical interface which is a member of a virtual interface. Value zero imp…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.1.1.1.12
cbQosTunDstAddrType This object is instantiated if cbQoSIfType object has the value of tunnel(8).	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.166.1.1.1.1.13
cbQosTunDstAddr This object is instantiated if cbQoSIfType object has the value of tunnel(8).	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.166.1.1.1.1.14
cbQosWirelessIifid This object is instantiated if cbQoSIfType object has the value of wirelessInterface(9).	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.1.1.1.15
cbQosServiceGroupIndex If the service policy is attached to a particular service-group, then this object specifies the corresponding Service-group id. In all other cases the value of this object is '0'.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.1.1.1.16

This table describes the service polices that are
attached to main and sub interfaces.

cbQosInterfacePolicyEntry row .1.3.6.1.4.1.9.9.166.1.2.1.1

Using ifIndex and Direction, each unique index pair
translates to a service policy that is attached to a
main/sub interface, for particular traffic direction.

Indexes

IF-MIBifIndex cbQosPolicyDirection

Column	Syntax	OID
cbQosIFPolicyIndex An arbitrary (system-assigned) index for all Service Policies. This is identical to cbQosPolicyIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.2.1.1.1

This table describes the service polices that are
attached to Frame Relay DLCIs.

cbQosFrameRelayPolicyEntry row .1.3.6.1.4.1.9.9.166.1.3.1.1

Using ifIndex, FR DLCI, and Direction, each unique
index combination translates to a service policy that
is attached to a FR DLCI, for particular traffic direction.

Indexes

IF-MIBifIndex cbQosFrDLCI cbQosPolicyDirection

Column	Syntax	OID
cbQosFRPolicyIndex An arbitrary (system-assigned) index for all Service Policies. This is identical to cbQosPolicyIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.3.1.1.1

This table describes the policies that are attached to a
ATM PVC.

cbQosATMPVCPolicyEntry row .1.3.6.1.4.1.9.9.166.1.4.1.1

Using ifIndex, VPI, VCI, and Direction, each unique
index combination translates to a service policy that
is attached to a ATM VC, for particular traffic direction.

Indexes

IF-MIBifIndex cbQosAtmVPI cbQosAtmVCI cbQosPolicyDirection

Column	Syntax	OID
cbQosATMPolicyIndex An arbitrary (system-assigned) index for all Service Policies. This is identical to cbQosPolicyIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.4.1.1.1

This table specifies QoS objects (classmap, policymap,
match statements, and actions) hierarchy. This table also 
provide relationship between each PolicyIndex/ObjectsIndex 
pair and the ConfigIndex. ConfigIndex is essential for 
querying any configuration tables.

cbQosObjectsEntry row .1.3.6.1.4.1.9.9.166.1.5.1.1

A QoS object entry. Objects covered in this table are
PolicyMap, ClassMap, Match Statements, and Actions.
Each entry is indexed by system-generated cbQosPolicyIndex,
and cbQosObjectsIndex, which represents a runtime ins…

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosObjectsIndex An arbitrary (system-assigned) instance specific index for cbQosObjectsEntry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.5.1.1.1
cbQosConfigIndex An arbitrary (system-assigned) config (instance independent) index for each Object. Each objects having the same configuration share the same config index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.5.1.1.2
cbQosObjectsType The type of the QoS object.	QosObjectType Type Values: 1 policymap 2 classmap 3 matchStatement 4 queueing 5 randomDetect 6 trafficShaping 7 police 8 set 9 compression 10 ipslaMeasure 11 account	.1.3.6.1.4.1.9.9.166.1.5.1.1.3
cbQosParentObjectsIndex The parent instance index of a QoS object. For a ClassMap, the parent index would be the index of the attached PolicyMap. For a Match Statement, the parent index would be the index of the…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.5.1.1.4

This table specifies Policymap configuration information

cbQosPolicyMapCfgEntry row .1.3.6.1.4.1.9.9.166.1.6.1.1

Each entry in this table describes configuration information
about a policymap. The information includes: Name, and it's
description. This table contains configuration information
only, no statistics associated with it…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosPolicyMapName Name of the Policymap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.166.1.6.1.1.1
cbQosPolicyMapDesc Description of the PolicyMap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.166.1.6.1.1.2

This table specifies ClassMap configuration information

cbQosCMCfgEntry row .1.3.6.1.4.1.9.9.166.1.7.1.1

Each entry in this table describes configuration information
about a classmap. The information includes: Name, and it's
description and whether it is a Match-All or Match-Any
class. This table contains configuration inf…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosCMName Name of the Classmap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.166.1.7.1.1.1
cbQosCMDesc Description of the Classmap.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.166.1.7.1.1.2
cbQosCMInfo Match all vs Match any in a given class.	QosClassInfo Type Values: 1 none 2 matchAll 3 matchAny	.1.3.6.1.4.1.9.9.166.1.7.1.1.3

This table specifies ClassMap configuration information

cbQosMatchStmtCfgEntry row .1.3.6.1.4.1.9.9.166.1.8.1.1

Each entry in this table describes configuration information
about a MatchStatement. The information includes: Name,
and whether it is a Match or Match-Not
statement. This table contains configuration information
only…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosMatchStmtName Name of the Match Statement.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.9.9.166.1.8.1.1.1
cbQosMatchStmtInfo Match vs Match Not in a given class.	QosMatchInfo Type Values: 1 none 2 matchNot	.1.3.6.1.4.1.9.9.166.1.8.1.1.2

This table specifies Queueing Action configuration
information

cbQosQueueingCfgEntry row .1.3.6.1.4.1.9.9.166.1.9.1.1

Each entry in this table describes configuration
information about a queueing action. The information
includes: Bandwidth, Units, Flow Enabled, Priority Enabled,
and Q size.

This table contains configurat…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosQueueingCfgBandwidthdeprecated The type of bandwidth configuration value represented by this object is indicated by the value of cbQosQueueingCfgBandwidthUnits for this entry. If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' o…	Integer32 Constraints: range: 0-2000000	.1.3.6.1.4.1.9.9.166.1.9.1.1.1
cbQosQueueingCfgBandwidthUnits Units of the accompanying cbQosQueueingCfgbandwidth parameter	QueueingBandwidthUnits Type Values: 1 kbps 2 percentage 3 percentageRemaining 4 ratioRemaining 5 perThousand 6 perMillion	.1.3.6.1.4.1.9.9.166.1.9.1.1.2
cbQosQueueingCfgFlowEnabled Boolean to indicate if flow-based fair-queue is enabled for this class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.9.1.1.3
cbQosQueueingCfgPriorityEnabled Boolean to indicate if low latency queueing (priority) is enabled for this class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.9.1.1.4
cbQosQueueingCfgAggregateQSizedeprecated Maximum number of packets that can be held in all the individual queues associated with this class before packets are dropped. cbQosQueueingCfgAggregateQSize object is superseded by cbQosQueueingCfgAggregateQLimit.	PacketsInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.166.1.9.1.1.5
cbQosQueueingCfgIndividualQSizedeprecated Maximum number of packets that can be held in an individual Flow-based fair-queue associated with this class before it drops packets (once the AggregateQSize has been reached). This field only makes sens…	PacketsInteger32 Constraints: range: 1-32768	.1.3.6.1.4.1.9.9.166.1.9.1.1.6
cbQosQueueingCfgDynamicQNumber Number of dynamic queues supported when flow-based fair-queue is in use.	Integer32 Constraints: range: 1-32768	.1.3.6.1.4.1.9.9.166.1.9.1.1.7
cbQosQueueingCfgPrioBurstSize In the priority queue, this is the number of bytes allowed in a single burst. This parameter only makes sense if Priority is enabled	BytesUnsigned32 Constraints: range: 32-64000000	.1.3.6.1.4.1.9.9.166.1.9.1.1.8
cbQosQueueingCfgQLimitUnits Represents the unit type of cbQosQueueingCfgAggregateQLimit object.	CbQosQueueUnitType Type Values: 1 packets 2 cells 3 bytes 4 ms 5 us 6 percentage	.1.3.6.1.4.1.9.9.166.1.9.1.1.9
cbQosQueueingCfgAggregateQLimit Maximum allowed queue size for all the individual queues associated with this class. When the queue size exceed this value, the packets will be dropped.	CbQosQueueDepth	.1.3.6.1.4.1.9.9.166.1.9.1.1.10
cbQosQueueingCfgAggrQLimitTime Maximum allowed queue size in milli-seconds for all individual queues associated with this class. It is internally converted to bytes by using the bandwidth that is available for the class.	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.9.1.1.11
cbQosQueueingCfgPriorityLevel The priority level of the queue into which packets matching this class are queued into. A larger priority level indicates higher priority.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.9.1.1.12
cbQosQueueingCfgBandwidth64 This object indicates the guaranteed bandwidth for a particular traffic class. The type of bandwidth configuration value represented by this object is indicated by the value of cbQosQueueingCfgBandwidthUn…	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.9.1.1.13
cbQosQueueingCfgIndividualQSize64 Maximum number of packets that can be held in an individual Flow-based fair-queue associated with this class before it drops packets (once the AggregateQSize has been reached). If a device implements cbQ…	CISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.9.1.1.14

This table specifies WRED Action configuration
information

cbQosREDCfgEntry row .1.3.6.1.4.1.9.9.166.1.10.1.1

Each entry in this table describes configuration
information about a WRED Action. The table holds global
(per traffic class) configuration like: Expon Weight
and Mean Q size.

This table contains configura…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosREDCfgExponWeight The decay factor for the queue average calculation. The decay factor is equal to raising 2 to the power of N, where N could be up to 16. The smaller the number, the faster it decays.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.9.9.166.1.10.1.1.1
cbQosREDCfgMeanQsizedeprecated The average queue size, computed and used by the WRED algorithm. cbQosREDCfgMeanQsize object is superseded by cbQosREDMeanQsize.	PacketsInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.166.1.10.1.1.2
cbQosREDCfgDscpPrec The Classification mechanism used by RED	REDMechanism Type Values: 1 precedence 2 dscp 3 discardClass 4 l2Cos 5 atmClp 6 mplsExp 7 redDefault 8 redUserDefault 9 dei	.1.3.6.1.4.1.9.9.166.1.10.1.1.3
cbQosREDCfgECNEnabled Boolean to indicate if explicit congestion notification enabled for this class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.10.1.1.4

This table specifies WRED Action configuration
information on a per IP precedence basis.

cbQosREDClassCfgEntry row .1.3.6.1.4.1.9.9.166.1.11.1.1

Each entry in this table describes configuration information
about a WRED Action. The table holds the per IP precedence
based WRED configuration parameters.

This table contains configuration information o…

Indexes

cbQosConfigIndex cbQosREDValue

Column	Syntax	OID
cbQosREDValue The IP precedence or IP DSCP of this entry.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.9.9.166.1.11.1.1.1
cbQosREDCfgMinThresholddeprecated Minimum threshold in number of packets. When the average queue length reaches this number, WRED begins to drop packets with the specified IP precedence. cbQosREDCfgMinThreshold object is superseded by cbQosREDClassCfg…	PacketsInteger32 Constraints: range: 1-32768	.1.3.6.1.4.1.9.9.166.1.11.1.1.2
cbQosREDCfgMaxThresholddeprecated Maximum threshold in number of packets. When the average queue length exceeds this number, WRED drops all packets with the specified IP precedence. cbQosREDCfgMaxThreshold object is superseded by cbQosREDClassCfgMaxTh…	PacketsInteger32 Constraints: range: 1-32768	.1.3.6.1.4.1.9.9.166.1.11.1.1.3
cbQosREDCfgPktDropProb Denominator for the fraction of packets dropped when the average queue depth is MaxDepthThreshold. For example, if the denominator is 10, one out of every 10 packets is dropped when the average queue is at the MaxDept…	Integer32 Constraints: range: 1-65536	.1.3.6.1.4.1.9.9.166.1.11.1.1.4
cbQosREDClassCfgThresholdUnitdeprecated Represents the unit type to measure the RED thresholds. The objects covered are cbQosREDClassCfgMinThreshold and cbQosREDClassCfgMaxThreshold cbQosREDClassCfgThresholdUnit object is superseded by cbQosREDClassCfgMinThr…	CbQosQueueUnitType Type Values: 1 packets 2 cells 3 bytes 4 ms 5 us 6 percentage	.1.3.6.1.4.1.9.9.166.1.11.1.1.5
cbQosREDClassCfgMinThreshold The minimum WRED threshold value. When the average queue length reaches this number, WRED begins to drop packets according to REDMechanism specificed in cbQosREDCfgDscpPrec.	CbQosQueueDepth	.1.3.6.1.4.1.9.9.166.1.11.1.1.6
cbQosREDClassCfgMaxThreshold The maximum WRED threshold value. When the average queue length exceeds this number, WRED drops all packets according to REDMechanism specificed in cbQosREDCfgDscpPrec.	CbQosQueueDepth	.1.3.6.1.4.1.9.9.166.1.11.1.1.7
cbQosREDClassCfgMinThresholdTime The minimum WRED threshold value specified in milli-seconds. The milli-second value is internally converted to bytes by using the bandwidth that is available for the class.	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.11.1.1.8
cbQosREDClassCfgMaxThresholdTime The maximum WRED threshold value specified in milli-seconds. The milli-second value is internally converted to bytes by using the bandwidth that is available for the class.	milli-secondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.11.1.1.9
cbQosREDClassCfgMaxThresholdUnit Represents the unit type to measure the RED Maximum thresholds. The objects covered is cbQosREDClassCfgMaxThreshold	CbQosQueueUnitType Type Values: 1 packets 2 cells 3 bytes 4 ms 5 us 6 percentage	.1.3.6.1.4.1.9.9.166.1.11.1.1.10
cbQosREDClassCfgMinThresholdUnit Represents the unit type to measure the RED Minimum thresholds. The objects covered is cbQosREDClassCfgMinThreshold	CbQosQueueUnitType Type Values: 1 packets 2 cells 3 bytes 4 ms 5 us 6 percentage	.1.3.6.1.4.1.9.9.166.1.11.1.1.11

This table specifies Police Action configuration
information.

cbQosPoliceCfgEntry row .1.3.6.1.4.1.9.9.166.1.12.1.1

Each entry in this table describes configuration information
about a Police Action. The table holds Policy
configuration parameters, such as rate, burst size, and
actions based on traffic rates.

This tab…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosPoliceCfgRate The committed policing rate. This is the sustained rate permitted by policing. If a committed policing rate greater than 4294967295 is configurable on the system, then the configured rate is available in …	bits/secondUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.1
cbQosPoliceCfgBurstSizedeprecated The amount of traffic, in bytes, in excess of the committed policing rate that will be permitted by the policing feature. cbQosPoliceCfgBurstSize object is superseded by cbQosPoliceCfgBurstSize64.	OctetsUnsigned32 Constraints: range: 1000-512000000	.1.3.6.1.4.1.9.9.166.1.12.1.1.2
cbQosPoliceCfgExtBurstSizedeprecated The amount of traffic, in bytes, in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the received burst size incr…	OctetsUnsigned32 Constraints: range: 1000-512000000	.1.3.6.1.4.1.9.9.166.1.12.1.1.3
cbQosPoliceCfgConformActiondeprecated Action to be taken when the traffic is within the configured rate, that is, the traffic rate is conforming. cbQosPoliceCfgConformAction object is superseded by cbQosPoliceActionCfgConform.	PoliceAction Type Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner 15 unconfigured 16 setDei 17 setDeiImposition 18 setSrpPriority	.1.3.6.1.4.1.9.9.166.1.12.1.1.4
cbQosPoliceCfgConformSetValuedeprecated New packet attribute values for each packets that conforms to the configured Police rate. cbQosPoliceCfgConformSetValue object is superseded by cbQosPoliceActionCfgConformSetValue.	Unsigned32 Constraints: range: 1-99	.1.3.6.1.4.1.9.9.166.1.12.1.1.5
cbQosPoliceCfgExceedActiondeprecated Action to be taken when the traffic exceeds the configured rate, that is, the traffic is non-conforming. cbQosPoliceCfgExceedAction object is superseded by cbQosPoliceActionCfgExceed.	PoliceAction Type Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner 15 unconfigured 16 setDei 17 setDeiImposition 18 setSrpPriority	.1.3.6.1.4.1.9.9.166.1.12.1.1.6
cbQosPoliceCfgExceedSetValuedeprecated New packet attribute values for each packets that conforms to the configured Police rate. cbQosPoliceCfgExceedSetValue object is superseded by cbQosPoliceActionCfgExceedSetValue.	Unsigned32 Constraints: range: 1-99	.1.3.6.1.4.1.9.9.166.1.12.1.1.7
cbQosPoliceCfgViolateActiondeprecated Action to be taken when the traffic exceeds the conform and exceed token buckets. cbQosPoliceCfgViolateAction object is superseded by cbQosPoliceActionCfgViolate.	PoliceAction Type Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner 15 unconfigured 16 setDei 17 setDeiImposition 18 setSrpPriority	.1.3.6.1.4.1.9.9.166.1.12.1.1.8
cbQosPoliceCfgViolateSetValuedeprecated New packet attribute values for each packets that conforms to the Police violate action. The packet attibute values depend on the action that is taken for the particular packet. For example, if the action was to set th…	Unsigned32 Constraints: range: 1-99	.1.3.6.1.4.1.9.9.166.1.12.1.1.9
cbQosPoliceCfgPirdeprecated The committed policing rate. This is the peak rate permitted by two rate policing. cbQosPoliceCfgPir object is superseded by cbQosPoliceCfgPir64.	bits/secondUnsigned32 Constraints: range: 8000-2000000000	.1.3.6.1.4.1.9.9.166.1.12.1.1.10
cbQosPoliceCfgRate64 The committed policing rate. This is the sustained rate permitted by policing.	bits/secondCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.12.1.1.11
cbQosPoliceCfgRateType The rate type that configured for CIR & PIR. 1 means rates are configured in bps. 2 means rates are configured in percentage. 3 means rates are configured in cps. 4 means rates are configured in parts per-thousand. 5 me…	CbQosRateType Type Values: 1 bps 2 percentage 3 cps 4 perThousand 5 perMillion	.1.3.6.1.4.1.9.9.166.1.12.1.1.12
cbQosPoliceCfgPercentRateValue The committed policing rate in percentage. Its value is valid only when cbQosPoliceCfgRateType equals to 2.	% of Interface BandwidthUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.9.9.166.1.12.1.1.13
cbQosPoliceCfgPercentPirValue The peak policing rate in percentage. Its value is valid only when cbQosPoliceCfgRateType equals to 2.	% of Interface BandwidthUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.9.9.166.1.12.1.1.14
cbQosPoliceCfgCellRate The committed policing rate in cells/second. Its value is valid only when cbQosPoliceCfgRateType equals to 3.	cells/secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.15
cbQosPoliceCfgCellPir The peak policing rate in cells/second. Its value is valid only when cbQosPoliceCfgRateType equals to 3.	cells/secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.16
cbQosPoliceCfgBurstCell The amount of traffic, in cells, in excess of the committed policing rate that will be permitted by the policing feature.	CellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.17
cbQosPoliceCfgExtBurstCell The amount of traffic, in cells, in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the received burst size increas…	CellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.18
cbQosPoliceCfgBurstTime The amount of traffic time, in ms, in excess of the committed policing rate that will be permitted by the policing feature. The milli-second value is internally converted to bytes by using the bandwidth that is availab…	milli-secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.19
cbQosPoliceCfgExtBurstTime The amount of traffic time, in ms, in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the received burst size incre…	milli-secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.20
cbQosPoliceCfgCdvt The ATM Cell Delay Variation Tolerance value.	micro-secondUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.12.1.1.21
cbQosPoliceCfgConformColor The Classmap name used in AF color-aware mode to specify the conform-color for the incoming packets which was marked by the previous node. At least conform-color must be specified. If only conform-color…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.166.1.12.1.1.22
cbQosPoliceCfgExceedColor The Classmap name used in AF color-aware mode to specify the exceed-color for the incoming packets which was marked by the previous node. If both conform-color and exceed-color are specified, all other pa…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.166.1.12.1.1.23
cbQosPoliceCfgConditional This object is use to depict weather police is configured as a conditioniler policer or not	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.12.1.1.24
cbQosPoliceCfgBurstSize64 This object indicated the amount of traffic, in bytes, in excess of the committed policing rate that will be permitted by the policing feature. If a device implements cbQosPoliceCfgBurstSize64, then it …	OctetsCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.12.1.1.25
cbQosPoliceCfgExtBurstSize64 This object indicated the amount of traffic, in bytes, in excess of the burst limit, which may be conditionally permitted by the policing feature. The probability that the traffic is not permitted increases as the rec…	OctetsCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.12.1.1.26
cbQosPoliceCfgPir64 This object indicates the committed policing rate. This is the peak rate permitted by two rate policing. If a device implements cbQosPoliceCfgPir64, then it should not implement cbQosPoliceCfgPir.	OctetsCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.12.1.1.27

This table specifies traffic-shaping Action configuration
information.

cbQosTSCfgEntry row .1.3.6.1.4.1.9.9.166.1.13.1.1

Each entry in this table describes configuration information
about a traffic-shaping Action. The table holds Traffic
Shaping configuration parameters, such as rate, burst size,
and Shaping types.

This tab…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosTSCfgRate The committed traffic-shaping rate. This is the sustained rate permitted by the traffic-shaping.	bits/secondInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.166.1.13.1.1.1
cbQosTSCfgBurstSizedeprecated The amount of traffic, in bits, in excess of the committed traffic-shaping rate that will be instantaneously permitted by this feature. cbQosTSCfgBurstSize object is superseded by cbQosTSCfgBurstSize64.	bitsInteger32 Constraints: range: 256-154400000	.1.3.6.1.4.1.9.9.166.1.13.1.1.2
cbQosTSCfgExtBurstSizedeprecated The amount of traffic, in bits, in excess of the burst limit, which may be conditionally permitted by traffic-shaping feature. cbQosTSCfgExtBurstSize object is superseded by cbQosTSCfgExtBurstSize64.	bitsInteger32 Constraints: range: 0-154400000	.1.3.6.1.4.1.9.9.166.1.13.1.1.3
cbQosTSCfgAdaptiveEnabled This object indicates is adaptive traffic-shaping has been enabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.13.1.1.4
cbQosTSCfgAdaptiveRate This object represents the current adaptive traffic shaping rate.	bits/secondInteger32 Constraints: range: 8000-154400000	.1.3.6.1.4.1.9.9.166.1.13.1.1.5
cbQosTSCfgLimitType This object indicates if traffic-shaping is limiting traffic based on the peak rate or the average rate.	TrafficShapingLimit Type Values: 1 average 2 peak	.1.3.6.1.4.1.9.9.166.1.13.1.1.6
cbQosTSCfgRateType The rate type that configured for traffic-shaping. 1 means rate is configured in bps. 2 means rate is configured in percentage. 4 means rates are configured in parts per-thousand. 5 means rates are configured in parts p…	CbQosRateType Type Values: 1 bps 2 percentage 3 cps 4 perThousand 5 perMillion	.1.3.6.1.4.1.9.9.166.1.13.1.1.7
cbQosTSCfgPercentRateValue The committed traffic-shaping rate in percentage. Its value is valid only when cbQosTSCfgRateType equals to 2.	% of Interface BandwidthUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.9.9.166.1.13.1.1.8
cbQosTSCfgBurstTime The amount of traffic, in ms, in excess of the committed traffic-shaping rate that will be instantaneously permitted by this feature. The milli-second value is internally converted to bits by using the bandwidth that is…	milli-secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.13.1.1.9
cbQosTSCfgExtBurstTime The amount of traffic, in ms, in excess of the burst limit, which may be conditionnally permitted by traffic-shaping feature. The milli-second value is internally converted to bits by using the bandwidth that is availab…	milli-secondsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.9.166.1.13.1.1.10
cbQosTSCfgRate64 The committed shape rate. This is the sustained rate permitted by shaping. This object represents the 64 bit value of object cbQosTSCfgRate	bits/secondCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.13.1.1.11
cbQosTSCfgBurstSize64 This object indicates the the amount of traffic, in bits, in excess of the committed traffic-shaping rate that will be instantaneously permitted by this feature. If a device implements cbQosTSCfgBurstSize…	bitsCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.13.1.1.12
cbQosTSCfgExtBurstSize64 This object indicates the amount of traffic, in bits, in excess of the burst limit, which may be conditionally permitted by traffic-shaping feature. If a device implements cbQosTSCfgExtBurstSize64, then …	bitsCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.13.1.1.13
cbQosTSCfgAdaptivePercentRateValue The committed lower traffic-shaping rate in percentage. Its value is valid only when cbQosTSCfgRateType equals to 2.	percentageSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.13.1.1.14

This table specifies Packet Marking Action configuration
information.

cbQosSetCfgEntry row .1.3.6.1.4.1.9.9.166.1.14.1.1

Each entry in this table describes configuration information
about a Packet Marking Action. The table holds Packet
Marking configuration parameters, such as type of packet
marking and values being set to.

…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosSetCfgFeature The bit-wise position of each packet marking feature.	SetFeatureType Type Values: 0 ipDscp 1 ipPrecedence 2 qosGroupNumber 3 frDeBit 4 atmClpBit 5 l2Cos 6 mplsExp 7 discardClass 8 mplsExpTopMost 9 srpPriority 10 frFecnBecn 11 ipDscpTunnel 12 ipPrecedenceTunnel 13 l2CosInner 14 dei 15 deiImposition	.1.3.6.1.4.1.9.9.166.1.14.1.1.1
cbQosSetCfgIpDSCPValue The IP DSCP value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.9.9.166.1.14.1.1.2
cbQosSetCfgIpPrecedenceValue The IP precedence value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.3
cbQosSetCfgQosGroupValue The QoS Group number at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-99	.1.3.6.1.4.1.9.9.166.1.14.1.1.4
cbQosSetCfgL2CosValue The Layer 2 Cos value at which the packet is being set by the packet marking feature.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.5
cbQosSetCfgMplsExpValue The MPLS experimental value at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.6
cbQosSetCfgDiscardClassValue The Discard Class value at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.7
cbQosSetCfgMplsExpTopMostValue The MPLS experimental value on the topmost label at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.8
cbQosSetCfgSrpPriority The SRP Priority value at which the packet is being set by the packet marking feature. The higher the value the higher the priority. SRP is a Cisco developed protocol. RFC 2892: The Cisco SRP MAC Layer Protocol.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.9
cbQosSetCfgFrFecnBecn This is a configurable parameter in percentage of the queue size. When the current queue size out of the queue limit is greater than this parameter, both Frame Relay FECN and BECN bits will be set for Frame Relay cong…	Unsigned32 Constraints: range: 0-99	.1.3.6.1.4.1.9.9.166.1.14.1.1.10
cbQosSetCfgL2CosInnerValue The value to be set in the 802.1p priority field in the inner 802.1q VLAN tag (QinQ). This object is applicable when cbQosSetCfgFeature has the 'l2CosInner' bit set.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.11
cbQosSetCfgFrDe The Discard Eligibility (DE) bit is used to indicate that a frame has lower importance than other frames. The DE bit is part of the Address field in the Frame Relay frame header. DTE devices can set the value of the…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.14.1.1.12
cbQosSetCfgIpPrecedenceTunnelValue The IP precedence value at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.166.1.14.1.1.13
cbQosSetCfgIpDSCPTunnelValue The IP DSCP value at which the packet is being set by the packet marking feature.	Unsigned32 Constraints: range: 0-63	.1.3.6.1.4.1.9.9.166.1.14.1.1.14
cbQosSetCfgDei Indicates whether the DEI bit is set in the topmost 802.1ad header.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.14.1.1.15
cbQosSetCfgDeiImposition Indicates whether the DEI bit is set in the imposed 802.1ad header.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.14.1.1.16

This table specifies ClassMap related Statistical
information.

cbQosCMStatsEntry row .1.3.6.1.4.1.9.9.166.1.15.1.1

Each entry in this table describes the statistical
information about ClassMap. ClassMap specific information
you can find in this table are : pre/post policy pkt/byte
counts, bit rates, drop pkt/bytes and no buffer drop…

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosCMPrePolicyPktOverflow The upper 32 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.1
cbQosCMPrePolicyPkt The lower 32 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.2
cbQosCMPrePolicyPkt64 The 64 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.3
cbQosCMPrePolicyByteOverflow The upper 32 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.4
cbQosCMPrePolicyByte The lower 32 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.5
cbQosCMPrePolicyByte64 The 64 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.6
cbQosCMPrePolicyBitRate The bit rate of the traffic prior to executing any QoS policies.	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.7
cbQosCMPostPolicyByteOverflow The upper 32 bits count of outbound octets after executing QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.8
cbQosCMPostPolicyByte The lower 32 bits count of outbound octets after executing QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.9
cbQosCMPostPolicyByte64 The 64 bits count of outbound octets after executing QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.10
cbQosCMPostPolicyBitRate The bit rate of the traffic after executing QoS policies.	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.11
cbQosCMDropPktOverflow The upper 32 bits counter of dropped pkts per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.12
cbQosCMDropPkt The lower 32 bits counter of dropped pkts per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.13
cbQosCMDropPkt64 The 64 bits counter of dropped pkts per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.14
cbQosCMDropByteOverflow The upper 32 bits counter of dropped bytes per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.15
cbQosCMDropByte The lower 32 bits counter of dropped bytes per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.16
cbQosCMDropByte64 The 64 bits counter of dropped bytes per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.17
cbQosCMDropBitRate The bit rate of the drops per class as the result of all features that can produce drops (e.g., police, random detect, etc.).	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.18
cbQosCMNoBufDropPktOverflow The upper 32 bits drop packet count which occured due to a lack of SRAM buffers during output processing on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.19
cbQosCMNoBufDropPkt The lower 32 bits drop packet count which occured due to a lack of SRAM buffers during output processing on an interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.20
cbQosCMNoBufDropPkt64 The 64 bits drop packet count which occured due to a lack of SRAM buffers during output processing on an interface.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.21
cbQosCMFragmentPktOverflow The upper 32 bits counter for aggregate fragment pkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.22
cbQosCMFragmentPkt The lower 32 bits counter for aggregate fragment pkts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.23
cbQosCMFragmentPkt64 The 64 bits counter for aggregate fragment pkts	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.24
cbQosCMFragmentByteOverflow The upper 32 bits counter for aggregate fragment bytes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.25
cbQosCMFragmentByte The lower 32 bits counter for aggregate fragment bytes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.15.1.1.26
cbQosCMFragmentByte64 The 64 bits counter for aggregate fragment bytes	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.15.1.1.27
cbQosCMPrePolicyBitRate64 The bit rate of the traffic prior to executing any QoS policies.This object is a 64-bit version of cbQosCMPrePolicyBitRate.	bits per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.166.1.15.1.1.28
cbQosCMPostPolicyBitRate64 The bit rate of the traffic after executing QoS policies. This object is a 64-bit version of cbQosCMPostPolicyBitRate.	bits per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.166.1.15.1.1.29
cbQosCMDropBitRate64 The bit rate of the drops per class as the result of all features that can produce drops (e.g., police, random detect, etc.). This object is a 64-bit version of cbQosCMDropBitRate.	bits per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.166.1.15.1.1.30

This table specifies Match Statement related statistical
information.

cbQosMatchStmtStatsEntry row .1.3.6.1.4.1.9.9.166.1.16.1.1

Each entry in this table describes the statistical
information about Match Statement. Match Statement specific
information you can find in this table are :
Pre policy pkt/byte counters, and bit rates.

Thi…

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosMatchPrePolicyPktOverflow The upper 32 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.16.1.1.1
cbQosMatchPrePolicyPkt The lower 32 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.16.1.1.2
cbQosMatchPrePolicyPkt64 The 64 bits count of inbound packets prior to executing any QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.16.1.1.3
cbQosMatchPrePolicyByteOverflow The upper 32 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.16.1.1.4
cbQosMatchPrePolicyByte The lower 32 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.16.1.1.5
cbQosMatchPrePolicyByte64 The 64 bits count of inbound octets prior to executing any QoS policies.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.16.1.1.6
cbQosMatchPrePolicyBitRate The bit rate of the traffic prior to executing any QoS policies.	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.16.1.1.7

This table specifies Police Action related Statistical
information.

cbQosPoliceStatsEntry row .1.3.6.1.4.1.9.9.166.1.17.1.1

Each entry in this table describes the statistical
information about Police Action. Police Action specific
information you can find in this table are :
Conformed/Exceeded pkt/byte counters, bit rates.

Th…

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosPoliceConformedPktOverflow The upper 32 bits count of packets treated as conforming by the policing feature.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.1
cbQosPoliceConformedPkt The lower 32 bits count of packets treated as conforming by the policing feature.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.2
cbQosPoliceConformedPkt64 The 64 bits count of packets treated as conforming by the policing feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.17.1.1.3
cbQosPoliceConformedByteOverflow The upper 32 bits count of octets treated as conforming by the policing feature.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.4
cbQosPoliceConformedByte The lower 32 bits count of octets treated as conforming by the policing feature.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.5
cbQosPoliceConformedByte64 The 64 bits count of octets treated as conforming by the policing feature.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.17.1.1.6
cbQosPoliceConformedBitRate The bit rate of conforming traffic.	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.7
cbQosPoliceExceededPktOverflow The upper 32 bits count of packets treated as non-conforming by the policing feature.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.8
cbQosPoliceExceededPkt The 32 bits count of packets treated as non-conforming by the policing feature.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.9
cbQosPoliceExceededPkt64 The 64 bits count of packets treated as non-conforming by the policing feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.17.1.1.10
cbQosPoliceExceededByteOverflow The upper 32 bits count of octets treated as non-conforming by the policing feature.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.11
cbQosPoliceExceededByte The lower 32 bits count of octets treated as non-conforming by the policing feature.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.12
cbQosPoliceExceededByte64 The 64 bits count of octets treated as non-conforming by the policing feature.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.17.1.1.13
cbQosPoliceExceededBitRate The bit rate of the non-conforming traffic.	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.14
cbQosPoliceViolatedPktOverflow The upper 32 bits count of packets treated as violated by the policing feature.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.15
cbQosPoliceViolatedPkt The 32 bits count of packets treated as violated by the policing feature.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.16
cbQosPoliceViolatedPkt64 The 64 bits count of packets treated as violated by the policing feature.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.17.1.1.17
cbQosPoliceViolatedByteOverflow The upper 32 bits count of octets treated as violated by the policing feature.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.18
cbQosPoliceViolatedByte The lower 32 bits count of octets treated as violated by the policing feature.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.19
cbQosPoliceViolatedByte64 The 64 bits count of octets treated as violated by the policing feature.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.17.1.1.20
cbQosPoliceViolatedBitRate The bit rate of the violating traffic.	bits per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.17.1.1.21
cbQosPoliceConformedBitRate64 The bit rate of conforming traffic. This object is a 64-bit version of cbQosPoliceConformedBitRate.	bits per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.166.1.17.1.1.22
cbQosPoliceExceededBitRate64 The bit rate of non-conforming traffic. This object is a 64-bit version of cbQosPoliceExceededBitRate.	bits per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.166.1.17.1.1.23
cbQosPoliceViolatedBitRate64 The bit rate of the violating traffic. This object is a 64-bit version of cbQosPoliceViolatedBitRate.	bits per secondHCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.9.9.166.1.17.1.1.24

This table specifies Queueing Action related Statistical
information.

cbQosQueueingStatsEntry row .1.3.6.1.4.1.9.9.166.1.18.1.1

Each entry in this table describes the statistical
information about queueing action. Queueing action specific
information you can find in this table are :
various Q depth, and discard pkt/byte counters.

…

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosQueueingCurrentQDepth The current depth of the queue.	OctetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.1
cbQosQueueingMaxQDepth The maximum depth of the queue.	OctetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.2
cbQosQueueingDiscardByteOverflow The upper 32 bit count of octets, associated with this class, that were dropped by queueing.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.3
cbQosQueueingDiscardByte The lower 32 bits count of octets, associated with this class, that were dropped by queueing.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.4
cbQosQueueingDiscardByte64 The count of octets, associated with this class, that were dropped by queueing.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.18.1.1.5
cbQosQueueingDiscardPktOverflow The upper 32 bits count of packets, associated with this class, that were dropped by queueing.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.6
cbQosQueueingDiscardPkt The number of packets, associated with this class, that were dropped by queueing.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.7
cbQosQueueingDiscardPkt64 The number of packets, associated with this class, that were dropped by queueing.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.18.1.1.8
cbQosQueueingCurrentQDepthPkt The current number of packets sitting in the queue	PacketsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.9
cbQosQueueingMaxQDepthPkt The maximum depth of the queue in packets.	PacketsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.18.1.1.10
cbQosQueueingTransmitByte64 The count of octets, associated with this class, that were transmitted by queueing.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.18.1.1.11
cbQosQueueingTransmitPkt64 The number of packets, associated with this class, that were transmitted by queueing.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.18.1.1.12

This table specifies traffic-shaping Action related
Statistical information.

cbQosTSStatsEntry row .1.3.6.1.4.1.9.9.166.1.19.1.1

Each entry in this table describes the statistical
information about traffic-shaping Action. Traffic-shaping
Action specific information you can find in this table are :
various delay/drop pkt/byte counters, state of …

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosTSStatsDelayedByteOverflow This object represents the upper 32 bits counter of octets that have been delayed.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.1
cbQosTSStatsDelayedByte This object represents the lower 32 bits counter of octets that have been delayed.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.2
cbQosTSStatsDelayedByte64 This object represents the 64 bits counter of octets that have been delayed.	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.19.1.1.3
cbQosTSStatsDelayedPktOverflow This object represents the upper 32 bits counter of packets that have been delayed.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.4
cbQosTSStatsDelayedPkt This object represents the lower 32 bits counter of packets that have been delayed.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.5
cbQosTSStatsDelayedPkt64 This object represents the 64 bits counter of packets that have been delayed.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.19.1.1.6
cbQosTSStatsDropByteOverflow This object represents the upper 32 bits counter of octets that have been dropped during shaping.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.7
cbQosTSStatsDropByte This object represents the lower 32 bits counter of octets that have been dropped during shaping.	octetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.8
cbQosTSStatsDropByte64 This object represents the 64 bits counter of octets that have been dropped during shaping.	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.19.1.1.9
cbQosTSStatsDropPktOverflow This object represents the upper 32 bits counter of packets that have been dropped during shaping.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.10
cbQosTSStatsDropPkt This object represents the lower 32 bits counter of packets that have been dropped during shaping.	packetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.11
cbQosTSStatsDropPkt64 This object represents the 64 bits counter of packets that have been dropped during shaping.	packetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.19.1.1.12
cbQosTSStatsActive This object indicates the current traffic-shaping state. When traffic-shaping is enabled and the traffic rate exceeds the shape rate, traffic-shaping is considered to be active. Otherwise, it is considered inactive.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.19.1.1.13
cbQosTSStatsCurrentQSize This object indicates the current traffic-shaping queue depth in packets.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.14
cbQosTSStatsTargetShapeRate The committed traffic-shaping rate. This is the sustained rate permitted by the traffic-shaping.	bits per secondCISCO-TCUnsigned64	.1.3.6.1.4.1.9.9.166.1.19.1.1.15
cbQoSTSStatsQSizeLastTenSecMin This object indicates the minimum traffic-shaping queue depth(in packets) in last 10 seconds.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.16
cbQoSTSStatsQSizeLastTenSecMax This object indicates the maximum traffic-shaping queue depth(in packets) in last 10 seconds.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.17
cbQoSTSStatsQSizeLastTenSecAvg This object indicates the average traffic-shaping queue depth(in packets) in last 10 seconds.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.18
cbQoSTSStatsQSizeLastOneMinMin This object indicates the minimum traffic-shaping queue depth(in packets) in last 1 minute.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.19
cbQoSTSStatsQSizeLastOneMinMax This object indicates the maximum traffic-shaping queue depth(in packets) in last 1 minute.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.20
cbQoSTSStatsQSizeLastOneMinAvg This object indicates the average traffic-shaping queue depth(in packets) in last 1 minute.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.21
cbQoSTSStatsQSizeLastFiveMinMin This object indicates the minimum traffic-shaping queue depth(in packets) in last 5 minutes.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.22
cbQoSTSStatsQSizeLastFiveMinMax This object indicates the maximum traffic-shaping queue depth(in packets) in last 5 minutes.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.23
cbQoSTSStatsQSizeLastFiveMinAvg This object indicates the Average traffic-shaping queue depth(in packets) in last 5 minutes.	packetsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.19.1.1.24

This table specifies per Precedence WRED Action related
Statistical information.

cbQosREDClassStatsEntry row .1.3.6.1.4.1.9.9.166.1.20.1.1

Each entry in this table describes the statistical
information about per Precedence WRED Action. per Precedence
WRED Action specific information you can find in this table
are : Random pkt/byte counters, and Tail drop …

Indexes

cbQosPolicyIndex cbQosObjectsIndex cbQosREDValue

Column	Syntax	OID
cbQosREDRandomDropPktOverflow The upper 32 bits count of packets dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.1
cbQosREDRandomDropPkt The lower 32 bits count of packets dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.2
cbQosREDRandomDropPkt64 The 64 bits count of packets dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.3
cbQosREDRandomDropByteOverflow The upper 32 bits count of bytes dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.4
cbQosREDRandomDropByte The lower 32 bits count of bytes dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.5
cbQosREDRandomDropByte64 The 64 bits count of bytes dropped when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.6
cbQosREDTailDropPktOverflow The upper 32 bits count of packets dropped when the number of packets in the associated queue was greater than the maximum threshold.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.7
cbQosREDTailDropPkt The lower 32 bits count of packets dropped when the number of packets in the associated queue was greater than the maximum threshold.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.8
cbQosREDTailDropPkt64 The 64 bits count of packets dropped when the number of packets in the associated queue was greater than the maximum threshold.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.9
cbQosREDTailDropByteOverflow The upper 32 bits count of bytes dropped when the number of packets in the associated queue was greater than the maximum threshold.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.10
cbQosREDTailDropByte The lower 32 bits count of bytes dropped when the number of packets in the associated queue was greater than the maximum threshold.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.11
cbQosREDTailDropByte64 The 64 bits count of bytes dropped when the number of packets in the associated queue was greater than the maximum threshold.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.12
cbQosREDTransmitPktOverflow The upper 32 bits count of bytes transmitted.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.13
cbQosREDTransmitPkt The lower 32 bits count of bytes trasmitted.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.14
cbQosREDTransmitPkt64 The 64 bits count of packets transmitted.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.15
cbQosREDTransmitByteOverflow The upper 32 bits count of octets transmitted.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.16
cbQosREDTransmitByte The lower 32 bits count of octets trasmitted.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.17
cbQosREDTransmitByte64 The 64 bits count of octets transmitted.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.18
cbQosREDECNMarkPktOverflow The upper 32 bits count of packets ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.19
cbQosREDECNMarkPkt The lower 32 bits count of packets ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.20
cbQosREDECNMarkPkt64 The 64 bits count of packets ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.21
cbQosREDECNMarkByteOverflow The upper 32 bits count of bytes ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.22
cbQosREDECNMarkByte The lower 32 bits count of bytes ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.20.1.1.23
cbQosREDECNMarkByte64 The 64 bits count of bytes ecn marked when the number of packets in the associated queue was greater than the minimum threshold and less than the maximum threshold.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.20.1.1.24
cbQosREDMeanQSizeUnits Represents the unit type of cbQosREDMeanQSize object.	CbQosQueueUnitType Type Values: 1 packets 2 cells 3 bytes 4 ms 5 us 6 percentage	.1.3.6.1.4.1.9.9.166.1.20.1.1.25
cbQosREDMeanQSize The average queue size computed and used by the WRED algorithm.	CbQosQueueDepth	.1.3.6.1.4.1.9.9.166.1.20.1.1.26

This table specifies Police Action configuration
information.

cbQosPoliceActionCfgEntry row .1.3.6.1.4.1.9.9.166.1.21.1.1

Each entry in this table describes configuration information
about Actions for one Police. The table holds Police
action specific configuration parameters.
This table is a sub-table for cbQosPoliceCfgTable. There is
a…

Indexes

cbQosConfigIndex cbQosPoliceActionCfgIndex

Column	Syntax	OID
cbQosPoliceActionCfgIndex An arbitrary (system-assigned) index for police actions that are defined by a police configuration.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.21.1.1.1
cbQosPoliceActionCfgConform Action to be taken when the traffic exceeds the conform and exceed token buckets.	PoliceAction Type Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner 15 unconfigured 16 setDei 17 setDeiImposition 18 setSrpPriority	.1.3.6.1.4.1.9.9.166.1.21.1.1.2
cbQosPoliceActionCfgConformSetValue New packet attribute values for each packet set by police action defined in cbQosPoliceActionCfgConform. This object will be set to zero if the corresponding police action does not require a set value, such as no actio…	Unsigned32 Constraints: range: 0-99	.1.3.6.1.4.1.9.9.166.1.21.1.1.3
cbQosPoliceActionCfgExceed Action to be taken when the traffic exceeds the conform and exceed token buckets.	PoliceAction Type Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner 15 unconfigured 16 setDei 17 setDeiImposition 18 setSrpPriority	.1.3.6.1.4.1.9.9.166.1.21.1.1.4
cbQosPoliceActionCfgExceedSetValue New packet attribute values for each packet set by police action defined in cbQosPoliceActionCfgExceed. This object will be set to zero if the corresponding police action does not require a set value, such as no action…	Unsigned32 Constraints: range: 0-99	.1.3.6.1.4.1.9.9.166.1.21.1.1.5
cbQosPoliceActionCfgViolate Action to be taken when the traffic exceeds the conform and exceed token buckets.	PoliceAction Type Values: 1 transmit 2 setIpDSCP 3 setIpPrecedence 4 setQosGroup 5 drop 6 setMplsExp 7 setAtmClp 8 setFrDe 9 setL2Cos 10 setDiscardClass 11 setMplsExpTopMost 12 setIpDscpTunnel 13 setIpPrecedenceTunnel 14 setL2CosInner 15 unconfigured 16 setDei 17 setDeiImposition 18 setSrpPriority	.1.3.6.1.4.1.9.9.166.1.21.1.1.6
cbQosPoliceActionCfgViolateSetValue New packet attribute values for each packet set by police action defined in cbQosPoliceActionCfgViolate. This object will be set to zero if the corresponding police action does not require a set value, such as no actio…	Unsigned32 Constraints: range: 0-99	.1.3.6.1.4.1.9.9.166.1.21.1.1.7

This table specifies IP Header Compression
configuration information.

cbQosIPHCCfgEntry row .1.3.6.1.4.1.9.9.166.1.22.1.1

Each entry in this table describes configuration
information about IP Header compression. This
includes the compression option of UDP/RTP header,
TCP header or both.

This table contains configuration inform…

Indexes

cbQosConfigIndex

Column	Syntax	OID
cbQosIPHCCfgOption The configured IP header compression option. The value is defined by IPHCOption.	IPHCOption Type Values: 1 rtp 2 tcp 3 bothRtpTcp	.1.3.6.1.4.1.9.9.166.1.22.1.1.1
cbQosIPHCCfgEnabled Boolean to indicate if IPHC is enabled for policy class.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.166.1.22.1.1.2

This table specifies IP Header Compression
statistical information.

cbQosIPHCStatsEntry row .1.3.6.1.4.1.9.9.166.1.23.1.1

Each entry in this table describes statistical
information about IP Header compression.

This table contains statistical information only,
no configuration information associated with it.
Therefore, it is in…

Indexes

cbQosPolicyIndex cbQosObjectsIndex

Column	Syntax	OID
cbQosIPHCRtpSentPktOverflow The upper 32 bits count of outbound UDP/RTP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.1
cbQosIPHCRtpSentPkt The lower 32 bits count of outbound UDP/RTP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.2
cbQosIPHCRtpSentPkt64 The 64 bits count of outbound UDP/RTP packets.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.3
cbQosIPHCRtpCmprsOutPktOverflow The upper 32 bits count of outbound compressed UDP/RTP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.4
cbQosIPHCRtpCmprsOutPkt The lower 32 bits count of outbound compressed UDP/RTP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.5
cbQosIPHCRtpCmprsOutPkt64 The 64 bits count of outbound compressed UDP/RTP packets.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.6
cbQosIPHCRtpSavedByteOverflow The upper 32 bits count of UDP/RTP bytes that saved due to IPHC.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.7
cbQosIPHCRtpSavedByte The lower 32 bits count of UDP/RTP bytes that saved due to IPHC.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.8
cbQosIPHCRtpSavedByte64 The 64 bits count of UDP/RTP bytes that saved due to IPHC.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.9
cbQosIPHCRtpSentByteOverflow The upper 32 bits count of outbound UDP/RTP bytes.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.10
cbQosIPHCRtpSentByte The lower 32 bits count of outbound UDP/RTP bytes.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.11
cbQosIPHCRtpSentByte64 The 64 bits count of outbound UDP/RTP bytes.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.12
cbQosIPHCRtpSentByteRate The 32 bits count of outbound UDP/RTP byte rate.	Octets per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.13
cbQosIPHCTcpSentPktOverflow The upper 32 bits count of outbound TCP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.14
cbQosIPHCTcpSentPkt The lower 32 bits count of outbound TCP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.15
cbQosIPHCTcpSentPkt64 The 64 bits count of outbound TCP packets.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.16
cbQosIPHCTcpCmprsOutPktOverflow The upper 32 bits count of outbound compressed TCP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.17
cbQosIPHCTcpCmprsOutPkt The lower 32 bits count of outbound compressed TCP packets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.18
cbQosIPHCTcpCmprsOutPkt64 The 64 bits count of outbound compressed TCP packets.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.19
cbQosIPHCTcpSavedByteOverflow The upper 32 bits count of TCP bytes that saved due to IPHC.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.20
cbQosIPHCTcpSavedByte The lower 32 bits count of TCP bytes that saved due to IPHC.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.21
cbQosIPHCTcpSavedByte64 The 64 bits count of TCP bytes that saved due to IPHC.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.22
cbQosIPHCTcpSentByteOverflow The upper 32 bits count of outbound TCP bytes.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.23
cbQosIPHCTcpSentByte The lower 32 bits count of outbound TCP bytes.	OctetsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.24
cbQosIPHCTcpSentByte64 The 64 bits count of outbound TCP bytes.	OctetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.25
cbQosIPHCTcpSentByteRate The 32 bits count of outbound TCP byte rate.	Octets per secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.166.1.23.1.1.26
cbQosIPHCRtpFullHdrSentPktOverflow The upper 32 bits count of total full header UDP/RTP packets sent out.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.27
cbQosIPHCRtpFullHdrSentPkt The lower 32 bits count of total full header UDP/RTP packets sent out.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.28
cbQosIPHCRtpFullHdrSentPkt64 The 64 bits count of total fullheader UDP/RTP packets sent out.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.29
cbQosIPHCTcpFullHdrSentPktOverflow The upper 32 bits count of total fullheader TCP packets sent out.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.30
cbQosIPHCTcpFullHdrSentPkt The lower 32 bits count of total fullheader TCP packets sent out.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.31
cbQosIPHCTcpFullHdrSentPkt64 The 64 bits count of total fullheader TCP packets sent out.	PacketsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.166.1.23.1.1.32