AIRESPACE-SWITCHING-MIB Table View

Agent Trap Log

agentTrapLogEntry row .1.3.6.1.4.1.14179.1.1.2.4.1

Agent trap log entry

Indexes

No indexes recorded

Column	Syntax	OID
agentTrapLogIndex Unique index of trap entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.1.2.4.1.1
agentTrapLogSystemTime System uptime when trap was sent. This entry shows how long the system has been up when the trap occurred.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.1.1.2.4.1.2
agentTrapLogTrap Description of the trap sent.	OctetString	.1.3.6.1.4.1.14179.1.1.2.4.1.22

A table of the wireless controllers on a WCP
device.

agentWcpControllerInfoEntry row .1.3.6.1.4.1.14179.1.1.6.7.1

Entry for a wireless controller on a WCP
device.

Indexes

No indexes recorded

Column	Syntax	OID
agentWcpControllerInfoSlotNumber The slot number on the Wcp device that a controller is residing on.	Unsigned32	.1.3.6.1.4.1.14179.1.1.6.7.1.1
agentWcpControllerInfoPortNumber The port number on the Wcp Device that a controller is residing on.	Unsigned32	.1.3.6.1.4.1.14179.1.1.6.7.1.2
agentWcpControllerInfoIpAddress The management IP Address of a controller.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.1.6.7.1.10

A table of the switch's login session

agentLoginSessionEntry row .1.3.6.1.4.1.14179.1.2.1.1.1

Login Session Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLoginSessionIndex Agent Login Session Index of the switch	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.1.1.1.1
agentLoginSessionUserName Agent Login Session UserName of the switch	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.14179.1.2.1.1.1.2
agentLoginSessionIPAddress Agent Login Session IP Address of the switch	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.1.1.1.3
agentLoginSessionConnectionType Agent Login Session Connection Type of the switch	Enumeration	.1.3.6.1.4.1.14179.1.2.1.1.1.4
agentLoginSessionIdleTime Agent Login Session Idle Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.2.1.1.1.5
agentLoginSessionSessionTime Agent Login Session Time of the switch	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.2.1.1.1.6
agentLoginSessionStatus Status of the user. active(1) - This connection is active. destroy(6) - Set to this value to disconnect this user.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.1.1.1.26

A summary table of the switch's lag config
entries

agentLagSummaryConfigEntry row .1.3.6.1.4.1.14179.1.2.2.2.1

Switch's lag config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLagSummaryNameobsolete Agent Lag Name	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.2.2.1.1
agentLagSummaryLagIndexobsolete Agent Lag If Index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.2.2.1.2
agentLagSummaryFlushTimerobsolete Agent Lag Flush Timer	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.2.2.1.3
agentLagSummaryLinkTrapobsolete Agent Lag Link Trap	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.2.2.1.4
agentLagSummaryAdminModeobsolete Agent Lag Admin Mode	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.2.2.1.5
agentLagSummaryStpModeobsolete Agent Lag STP Mode	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.2.2.1.6
agentLagSummaryAddPortobsolete Agent Lag Add Port. Note: agentPortType for the port to be added must be full duplex and the same speed as previously added port(s), if any.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.2.2.1.7
agentLagSummaryDeletePortobsolete Agent Lag Delete Port	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.2.2.1.8
agentLagSummaryPortsBitMaskobsolete Agent Lag Member Ports in bit mask representation	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.2.2.2.1.9
agentLagSummaryStatusobsolete Agent Lag Status. active(1) - This Lag is enabled. destroy(6) - Set to this value to remove the Lag.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.2.2.1.30

A detailed table of the switch's lag config
entries

agentLagDetailedConfigEntry row .1.3.6.1.4.1.14179.1.2.2.3.1

Switch's lag config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentLagDetailedLagIndexobsolete Lag index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.2.3.1.1
agentLagDetailedIfIndexobsolete Lag port index	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.2.3.1.2
agentLagDetailedPortSpeedobsolete Lag port speed. See agentPortType for description and list of valid values.	ObjectIdentifier	.1.3.6.1.4.1.14179.1.2.2.3.1.22

A table of the switch's Network Route entries

agentNetworkRouteConfigEntry row .1.3.6.1.4.1.14179.1.2.3.23.1

Switch's Network Route entry

Indexes

No indexes recorded

Column	Syntax	OID
agentNetworkRouteIPAddress Network Route IP Address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.3.23.1.1
agentNetworkRouteIPNetmask Network Route IP Netmask.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.3.23.1.2
agentNetworkRouteGateway Network Route IP Gateway.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.3.23.1.3
agentNetworkRouteStatus Network Route Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.3.23.1.23

A table of the switch's SNMP community Config
entries

agentSnmpCommunityConfigEntry row .1.3.6.1.4.1.14179.1.2.5.5.1

Switch's SNMP community Config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSnmpCommunityName The switch's Snmp Community Name This name identifies each SNMP community; the name can be up to 16 characters, and it is case-sensitive. Community names in the SNMP community must be unique. If you make multiple entri…	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.5.5.1.1
agentSnmpCommunityIPAddress The switch's Snmp Community IP Address Client IP Address - This attribute is an IP address (or portion thereof) from which this device will accept SNMP packets with the associated community. The requesting entity's IP a…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.5.5.1.2
agentSnmpCommunityIPMask The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client I…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.5.5.1.3
agentSnmpCommunityAccessMode The switch's Snmp Community Access Mode Access Mode - This value can be readOnly or readWrite. A community with a read-only access allows for switch information to be displayed. A community with a readWrite access allo…	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.5.5.1.4
agentSnmpCommunityEnabled If community is Enabled	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.5.5.1.5
agentSnmpCommunityInetAddressType This object represents the type of the primary controller's address made available through agentSnmpCommunityInetAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.14179.1.2.5.5.1.6
agentSnmpCommunityInetAddress This object represents the address from which this device will accept SNMP packets with the associated community.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.14179.1.2.5.5.1.7
agentSnmpCommunityPrefixLength This object denotes the prefix length for Inet address which is a mask to be logical-ANDed with the requesting entity's IPv6 address before comparison with the Client IP Address..	Unsigned32r/w	.1.3.6.1.4.1.14179.1.2.5.5.1.8
agentSnmpCommunityStatus The switch's Snmp Community Status. active(1) - This community is active, allowing SNMP manager associated with this community to manage …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.5.5.1.25

Trap messages are sent across a network to an SNMP
Network Manager. These messages alert the manager to
events occurring within the switch or on the network.
Up to six simultaneous trap receivers are supported.

agentSnmpTrapReceiverConfigEntry row .1.3.6.1.4.1.14179.1.2.5.6.1

Switch's Snmp Trap Receiver Config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSnmpTrapReceiverName The switch's Snmp Trap Receiver Name. This is the name of the remote network manager. the name can be up to 16 characters, and is case-sensitive.	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.5.6.1.1
agentSnmpTrapReceiverIPAddress SNMP network Manager IP Address. The IP Address traps will be sent to. Each IP address parameter is four integer numbers. The numbers range from 0 to 255. After creation of entry IP Address cannot be changed.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.5.6.1.2
agentSnmpTrapReceiverEnabled The flag to enable the trap receiver. If disabled, no traps are sent to this receiver's IP Address.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.5.6.1.3
agentSnmpTrapReceiverInetAddressType The flag to enable the trap receiver. If disabled, no traps are sent to this receiver's IP Address.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.14179.1.2.5.6.1.4
agentSnmpTrapReceiverInetAddress The flag to enable the trap receiver. If disabled, no traps are sent to this receiver's IP Address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.14179.1.2.5.6.1.5
agentSnmpTrapReceiverStatus This object is used to create and delete instances of this table. The row, when created with the row status value of 'createAndGo' or 'createAndWait' is moved to the 'active' state automatically by the agent and remains…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.5.6.1.23

User Config Table. Only creation and deletion of
users is supported.  All individual updates are
not supported.

agentSnmpV3UserConfigEntry row .1.3.6.1.4.1.14179.1.2.6.2.1

User Config Entry

Indexes

No indexes recorded

Column	Syntax	OID
agentSnmpV3UserName Agent User Name.	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.6.2.1.1
agentSnmpV3UserAccessMode Agent User Access Mode	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.6.2.1.2
agentSnmpV3UserAuthenticationType SNMPv3 User Authentication none(1) - no authentication used hmacmd5(1) - Use HMAC-MD5 authentication hmacsha(1) - Use HMAC-SHA authentication	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.6.2.1.3
agentSnmpV3UserEncryptionType SNMPv3 User Encryption Must be set to none(1) if agentSnmpV3UserAuthenticationType is set to none(1). Setting this object will set the encryption password to an empty string. none(1) - no encryption used des(2) - DES …	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.6.2.1.4
agentSnmpV3UserAuthenticationPassword SNMPv3 User Encryption Password	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.6.2.1.5
agentSnmpV3UserEncryptionPassword SNMPv3 User Encryption Password	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.6.2.1.6
agentSnmpV3UserStatus Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.6.2.1.26

The switch's address aging timeout table

agentSwitchAddressAgingTimeoutEntry row .1.3.6.1.4.1.14179.1.2.8.4.1

Aging information about a specific Filtering
Database.

Indexes

No indexes recorded

Column	Syntax	OID
agentSwitchAddressAgingTimeout The FDB entry's address aging timeout(in seconds)	Integer32r/w	.1.3.6.1.4.1.14179.1.2.8.4.1.10

This table provides 802.3ad link aggregation
information for each physical port that is not
available through the standard MIB.

agentDot3adAggPortEntry row .1.3.6.1.4.1.14179.1.2.11.1

Information about a table entry. The
agentDot3adAggPort identifies the external
interface number of the port.

Indexes

No indexes recorded

Column	Syntax	OID
agentDot3adAggPortobsolete ifIndex of this physical port	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.11.1.1
agentDot3adAggPortLACPModeobsolete Enable/disable 802.3ad LACP on this port	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.11.1.21

A table of the switch's physical port config
entries

agentPortConfigEntry row .1.3.6.1.4.1.14179.1.2.12.1

Switch's physical port config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentPortDot1dBasePort The port number of this port.	Integer32	.1.3.6.1.4.1.14179.1.2.12.1.1
agentPortIfIndex The switch's Port IfIndex	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.14179.1.2.12.1.2
agentPortIanaType The switch's Port Type	IANAifType-MIBIANAifType Type Values: 1 other 2 regular1822 3 hdh1822 4 ddnX25 5 rfc877x25 6 ethernetCsmacd 7 iso88023Csmacd 8 iso88024TokenBus 9 iso88025TokenRing 10 iso88026Man 11 starLan 12 proteon10Mbit 13 proteon80Mbit 14 hyperchannel 15 fddi 16 lapb 17 sdlc 18 ds1 19 e1 20 basicISDN 21 primaryISDN 22 propPointToPointSerial 23 ppp 24 softwareLoopback 25 eon 26 ethernet3Mbit 27 nsip 28 slip 29 ultra 30 ds3 31 sip 32 frameRelay 33 rs232 34 para 35 arcnet 36 arcnetPlus 37 atm 38 miox25 39 sonet 40 x25ple 41 iso88022llc 42 localTalk 43 smdsDxi 44 frameRelayService 45 v35 46 hssi 47 hippi 48 modem 49 aal5 50 sonetPath 51 sonetVT 52 smdsIcip 53 propVirtual 54 propMultiplexor 55 ieee80212 56 fibreChannel 57 hippiInterface 58 frameRelayInterconnect 59 aflane8023 60 aflane8025 61 cctEmul 62 fastEther 63 isdn 64 v11 65 v36 66 g703at64k 67 g703at2mb 68 qllc 69 fastEtherFX 70 channel 71 ieee80211 72 ibm370parChan 73 escon 74 dlsw 75 isdns 76 isdnu 77 lapd 78 ipSwitch 79 rsrb 80 atmLogical 81 ds0 82 ds0Bundle 83 bsc 84 async 85 cnr 86 iso88025Dtr 87 eplrs 88 arap 89 propCnls 90 hostPad 91 termPad 92 frameRelayMPI 93 x213 94 adsl 95 radsl 96 sdsl 97 vdsl 98 iso88025CRFPInt 99 myrinet 100 voiceEM 101 voiceFXO 102 voiceFXS 103 voiceEncap 104 voiceOverIp 105 atmDxi 106 atmFuni 107 atmIma 108 pppMultilinkBundle 109 ipOverCdlc 110 ipOverClaw 111 stackToStack 112 virtualIpAddress 113 mpc 114 ipOverAtm 115 iso88025Fiber 116 tdlc 117 gigabitEthernet 118 hdlc 119 lapf 120 v37 121 x25mlp 122 x25huntGroup 123 transpHdlc 124 interleave 125 fast 126 ip 127 docsCableMaclayer 128 docsCableDownstream 129 docsCableUpstream 130 a12MppSwitch 131 tunnel 132 coffee 133 ces 134 atmSubInterface 135 l2vlan 136 l3ipvlan 137 l3ipxvlan 138 digitalPowerline 139 mediaMailOverIp 140 dtm 141 dcn 142 ipForward 143 msdsl 144 ieee1394 145 if-gsn 146 dvbRccMacLayer 147 dvbRccDownstream 148 dvbRccUpstream 149 atmVirtual 150 mplsTunnel 151 srp 152 voiceOverAtm 153 voiceOverFrameRelay 154 idsl 155 compositeLink 156 ss7SigLink 157 propWirelessP2P 158 frForward 159 rfc1483 160 usb 161 ieee8023adLag 162 bgppolicyaccounting 163 frf16MfrBundle 164 h323Gatekeeper 165 h323Proxy 166 mpls 167 mfSigLink 168 hdsl2 169 shdsl 170 ds1FDL 171 pos 172 dvbAsiIn 173 dvbAsiOut 174 plc 175 nfas 176 tr008 177 gr303RDT 178 gr303IDT 179 isup 180 propDocsWirelessMaclayer 181 propDocsWirelessDownstream 182 propDocsWirelessUpstream 183 hiperlan2 184 propBWAp2Mp 185 sonetOverheadChannel 186 digitalWrapperOverheadChannel 187 aal2 188 radioMAC 189 atmRadio 190 imt 191 mvl 192 reachDSL 193 frDlciEndPt 194 atmVciEndPt 195 opticalChannel 196 opticalTransport 197 propAtm 198 voiceOverCable 199 infiniband 200 teLink 201 q2931 202 virtualTg 203 sipTg 204 sipSig 205 docsCableUpstreamChannel 206 econet 207 pon155 208 pon622 209 bridge 210 linegroup 211 voiceEMFGD 212 voiceFGDEANA 213 voiceDID 214 mpegTransport 215 sixToFour 216 gtp 217 pdnEtherLoop1 218 pdnEtherLoop2 219 opticalChannelGroup 220 homepna 221 gfp 222 ciscoISLvlan 223 actelisMetaLOOP 224 fcipLink 225 rpr 226 qam 227 lmp 228 cblVectaStar 229 docsCableMCmtsDownstream 230 adsl2 231 macSecControlledIF 232 macSecUncontrolledIF 233 aviciOpticalEther 234 atmbond 235 voiceFGDOS 236 mocaVersion1 237 ieee80216WMAN 238 adsl2plus 239 dvbRcsMacLayer 240 dvbTdm 241 dvbRcsTdma 242 x86Laps 243 wwanPP 244 wwanPP2 245 voiceEBS 246 ifPwType 247 ilan 248 pip 249 aluELP 250 gpon 251 vdsl2 252 capwapDot11Profile 253 capwapDot11Bss 254 capwapWtpVirtualRadio 255 bits 256 docsCableUpstreamRfPort 257 cableDownstreamRfPort 258 vmwareVirtualNic 259 ieee802154 260 otnOdu 261 otnOtu 262 ifVfiType 263 g9981 264 g9982 265 g9983 266 aluEpon 267 aluEponOnu 268 aluEponPhysicalUni 269 aluEponLogicalLink 270 aluGponOnu 271 aluGponPhysicalUni 272 vmwareNicTeam 277 docsOfdmDownstream 278 docsOfdmaUpstream 279 gfast 280 sdci 281 xboxWireless 282 fastdsl 283 docsCableScte55d1FwdOob 284 docsCableScte55d1RetOob 285 docsCableScte55d2DsOob 286 docsCableScte55d2UsOob 287 docsCableNdf 288 docsCableNdr 289 ptm 290 ghn 291 otnOtsi 292 otnOtuc 293 otnOduc 294 otnOtsig 295 microwaveCarrierTermination 296 microwaveRadioLinkTerminal 297 ieee8021axDrni 298 ax25 299 ieee19061nanocom 300 cpri 301 omni 302 roe 303 p2pOverLan	.1.3.6.1.4.1.14179.1.2.12.1.3
agentPortSTPMode The switch's Port Spanning Tree Protocol Mode STP mode values are: dot1d (the default) fast, indicates you want to use the fast spanning tree mode off, indicates the STP mode is turned off for a particular port	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.4
agentPortSTPState The switch's Port Spanning Tree Protocol State	Enumeration	.1.3.6.1.4.1.14179.1.2.12.1.5
agentPortAdminMode The switch's Port Admin Mode	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.6
agentPortPhysicalModedeprecated The switch's Port Speed Mode. This is the configured physical mode.This object is read-only for gigabit ports. Deprecated by clsPortModePhysicalMode.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.7
agentPortPhysicalStatusdeprecated The switch's Port Physical Speed Status.This is the current actual speed. Deprecated by clsPortModePhysicalStatus.	Enumeration	.1.3.6.1.4.1.14179.1.2.12.1.8
agentPortLinkTrapMode If enabled, link up and link down traps will be sent for this port.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.9
agentPortClearStats Clear stats for this port only	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.10
agentPortDefaultType This object identifies the default administrative port type, to be used in conjunction with the operational port type denoted by agentPortType. The set of possible values for this object is the same as th…	ObjectIdentifierr/w	.1.3.6.1.4.1.14179.1.2.12.1.11
agentPortType This object identifies the port type. An initial set of MAU types are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the…	ObjectIdentifier	.1.3.6.1.4.1.14179.1.2.12.1.12
agentPortAutoNegAdminStatus This object identifies the administration status of auto negotiation for this port.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.13
agentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable 802.3x flow control for this port. This value applies to only full-duplex mode ports.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.14
agentPortPowerMode Enable/Disable the port's Power over ethernet. This doesn't apply to appliances that have no POE controller.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.15
agentPortGvrpStatusobsolete The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this device. When disabled(2) but dot1qGvrpStatus is still ena…	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.16
agentPortGarpJoinTimeobsolete The GARP Join time, in centiseconds.(Attribute no longer supported)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.2.12.1.17
agentPortGarpLeaveTimeobsolete The GARP Leave time, in centiseconds.(Attribute no longer supported)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.2.12.1.18
agentPortGarpLeaveAllTimeobsolete The GARP LeaveAll time, in centiseconds.(Attribute no longer supported)	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.2.12.1.19
agentPortMirrorMode The switch's Port Mirror Mode. If enabled, then this is the port that the packets are mirrored to.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.20
agentPortMulticastApplianceMode The Port Multicast Appliance Mode. If enabled, then this port allows multicast streams through it. At a time, a maximum of four ports including the gigabit ethernet port can have this mode enabled on them. This is to l…	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.12.1.21
agentPortOperationalStatus The current operational state of the port.	Enumeration	.1.3.6.1.4.1.14179.1.2.12.1.40

A table of the switch's Interface Config entries
Typically, it will contain entries for Service
Port Interface, DS Port Interface and Virtual
Gateway Interface apart from other entries.

agentInterfaceConfigEntry row .1.3.6.1.4.1.14179.1.2.13.1

Switch's Interface Config entry

Indexes

No indexes recorded

Column	Syntax	OID
agentInterfaceName Interace Name. This values is 'management' for DS port, 'service-port' for service port and 'virtual' for virtual gateway. For other interfaces, the name can be anything. These interfaces are already created by default.	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.13.1.1
agentInterfaceVlanId Vlan ID configured for the Interface.	Integer32r/w	.1.3.6.1.4.1.14179.1.2.13.1.2
agentInterfaceType The interface's type. The static type is set for the interfaces that are created by default on the switch and these cannot be deleted. Any other interface that is created is of type dynamic which can be deleted.	Enumeration	.1.3.6.1.4.1.14179.1.2.13.1.3
agentInterfaceMacAddress Interface MAC Address. This is only applicable in case of management and service-port interfaces.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.14179.1.2.13.1.4
agentInterfaceIPAddress IP Address of the interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.13.1.5
agentInterfaceIPNetmask IP Netmask of the interface. This is 0 for the virtual interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.13.1.6
agentInterfaceIPGateway IP Gateway of the interface. This is 0 for virtual and service-port interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.13.1.7
agentInterfacePortNo A value 0 means the port is not set. The valid value can be any one of the physical ports on the switch. This is the primary port configured on the interface.	Integer32r/w	.1.3.6.1.4.1.14179.1.2.13.1.8
agentInterfacePrimaryDhcpAddress Primary DHCP Server IP Address for the interface This applies to the management interface and other dynamic interfaces.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.13.1.9
agentInterfaceSecondaryDhcpAddress Secondary DHCP Server IP Address for the interface. This applies to the management interface and other dynamic interfaces.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.13.1.10
agentInterfaceDhcpProtocol The interface's DHCP protocol. This applies only to the service port interface.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.13.1.11
agentInterfaceDnsHostName The DNS host name for the Virtual Interface. This attribute is not valid for other interfaces.	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.13.1.12
agentInterfaceAclName Name of the Access Control List applied to the interface. This attribute is applicable only to the management interface and other dynamic interfaces. If it is required to remove the ACL name for an interface, it should …	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.13.1.13
agentInterfaceAPManagementFeature When enabled, the dynamic interface can be used for AP management. SNMP support for AP management through dynamic interfaces has been introduced since '3.0.21.0' release. Only applicable to dynamic interfaces in 4200 s…	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.13.1.14
agentInterfaceActivePortNo This is the currently active port for this interface.	Integer32	.1.3.6.1.4.1.14179.1.2.13.1.15
agentInterfaceBackupPortNo This values is valid only for the 4200 series of switches. The backup port is the port this interface is moved to once the primary port fails. A value 0 means the port is not set. The valid value can be any one of the…	Integer32r/w	.1.3.6.1.4.1.14179.1.2.13.1.16
agentInterfaceVlanQuarantine This object is used to configure the health of the interface identified by agentInterfaceName. A value of 'true' is used to indicate that this particular interface is unhealthy. In this case, the data pa…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.14179.1.2.13.1.17
agentInterfaceRowStatus The interface entry Row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.13.1.31

A summary table for switch's lag config entries

agentNtpServerEntry row .1.3.6.1.4.1.14179.1.2.14.2.1

Switch's NTP Server entry. Upto 4 entries may be
added.

Indexes

No indexes recorded

Column	Syntax	OID
agentNtpServerIndex NTP Server priority index.	Integer32r/w	.1.3.6.1.4.1.14179.1.2.14.2.1.1
agentNtpServerAddress IP Address of the NTP Server	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.14.2.1.2
agentNtpServerRowStatus NTP server entry row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.14.2.1.20

A table listing the Scopes defined on the
switch's DHCP Server.

agentDhcpScopeEntry row .1.3.6.1.4.1.14179.1.2.15.1.1

Switch's DHCP Server Scope entry.

Indexes

No indexes recorded

Column	Syntax	OID
agentDhcpScopeIndex DHCP Scope Identifier Index.	Unsigned32r/w	.1.3.6.1.4.1.14179.1.2.15.1.1.1
agentDhcpScopeName DHCP Scope Name.	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.15.1.1.2
agentDhcpScopeLeaseTime DHCP Scope Lease time in seconds.	Integer32r/w	.1.3.6.1.4.1.14179.1.2.15.1.1.3
agentDhcpScopeNetwork IP Address of the DHCP Scope Network. This is the address which is used to determine the DHCP scope a remote Switch is attaching to.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.4
agentDhcpScopeNetmask The DHCP Scope Netmask. This the subnet mask for the address pool.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.5
agentDhcpScopePoolStartAddress The DHCP Scope address pool start IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.6
agentDhcpScopePoolEndAddress The DHCP Scope address pool end IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.7
agentDhcpScopeDefaultRouterAddress1 IP Address of the DHCP Scope's default Router 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.8
agentDhcpScopeDefaultRouterAddress2 IP Address of the DHCP Scope's default Router 2.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.9
agentDhcpScopeDefaultRouterAddress3 IP Address of the DHCP Scope's default Router 3.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.10
agentDhcpScopeDnsDomainName DNS Domain name for the DHCP Scope.	OctetStringr/w	.1.3.6.1.4.1.14179.1.2.15.1.1.11
agentDhcpScopeDnsServerAddress1 IP Address of the DHCP Scope's DNS Server 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.12
agentDhcpScopeDnsServerAddress2 IP Address of the DHCP Scope's DNS Server 2.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.13
agentDhcpScopeDnsServerAddress3 IP Address of the DHCP Scope's DNS Server 3.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.14
agentDhcpScopeNetbiosNameServerAddress1 IP Address of DHCP Scope's Netbios Name Server 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.15
agentDhcpScopeNetbiosNameServerAddress2 IP Address of DHCP Scope's Netbios Name Server 2.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.16
agentDhcpScopeNetbiosNameServerAddress3 IP Address of DHCP Scope's Netbios Name Server 3.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.14179.1.2.15.1.1.17
agentDhcpScopeState DHCP Scope's State.	Enumerationr/w	.1.3.6.1.4.1.14179.1.2.15.1.1.18
agentDhcpScopeRowStatus Dhcp Scope entry row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.14179.1.2.15.1.1.30

A list of additional thernet statistics entries.

portStatsEntry row .1.3.6.1.4.1.14179.1.4.1.1

A collection of statistics kept for a particular Ethernet
interface.

Indexes

No indexes recorded

Column	Syntax	OID
portStatsIndex The value of this object uniquely identifies this portStatsEntry.	Integer32	.1.3.6.1.4.1.14179.1.4.1.1.1
portStatsPktsTx64Octets The total number of packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.2
portStatsPktsTx65to127Octets The total number of packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.3
portStatsPktsTx128to255Octets The total number of packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.4
portStatsPktsTx256to511Octets The total number of packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.5
portStatsPktsTx512to1023Octets The total number of packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.6
portStatsPktsTx1024to1518Octets The total number of packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.7
portStatsPktsRx1519to1530Octets The total number of packets (including bad packets) received that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.8
portStatsPktsTx1519to1530Octets The total number of packets (including bad packets) transmitted that were between 1519 and 1530 octets in length inclusive (excluding framing bits but including FCS octets).	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.9
portStatsPktsTxOversizeOctets The total number of packets (including bad packets) transmitted that were more than 1530 octets in length. (excluding framing bits but including FCS octets). For 5500 controllers, the length is more than 1518 octets.	PacketsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.14179.1.4.1.1.30