agentPortType
AIRESPACE-SWITCHING-MIB ·
.1.3.6.1.4.1.14179.1.2.12.1.12
Object
column
ObjectIdentifier
This object identifies the port type.
An initial set of MAU types are defined in RFC 2668.
The assignment of OBJECT IDENTIFIERs to new types of
MAUs is managed by the IANA.
If the MAU type is unknown, the object identifier
unknownMauType OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownMauType is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER must
be able to generate and recognize this value.
This object represents the operational type of the
MAU, as determined by either (1) the result of the
auto-negotiation function or (2) if auto-negotiation
is not enabled or is not implemented for this MAU,
by the value of the object qbEnetDefaultType, or (3)
for the GigE card a value determined by the GBIC
connected to the card. In case (2), a set to the
object qbEnetPortDefaultType will force the MAU into
the new operating mode.
The valid values for this object are:
dot3MauType10BaseTHD
dot3MauType10BaseTFD
dot3MauType100BaseTXHD
dot3MauType100BaseTXFD
dot3MauType100BaseFXFD
dot3MauType1000BaseSXFD
Context
- MIB
- AIRESPACE-SWITCHING-MIB
- OID
.1.3.6.1.4.1.14179.1.2.12.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- agentPortConfigEntry
- Table
- agentPortConfigTable
- Siblings
- 21
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentPortDot1dBasePort The port number of this port. | column | Integer32 | .1.3.6.1.4.1.14179.1.2.12.1.1 |
| agentPortClearStats Clear stats for this port only | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.10 |
| agentPortDefaultType This object identifies the default administrative
port type, to be used in conjunction with the
operational port type denoted by agentPortType.
The set of possible … | column | ObjectIdentifier | .1.3.6.1.4.1.14179.1.2.12.1.11 |
| agentPortAutoNegAdminStatus This object identifies the administration status of
auto negotiation for this port. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.13 |
| agentPortDot3FlowControlMode Config flowcontrol allows you to enable or
disable 802.3x flow control for this port. This
value applies to only full-duplex mode ports. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.14 |
| agentPortPowerMode Enable/Disable the port's Power over ethernet. This doesn't
apply to appliances that have no POE controller. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.15 |
| agentPortGvrpStatus obsolete The state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this
device. When disa… | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.16 |
| agentPortGarpJoinTime obsolete The GARP Join time, in centiseconds.(Attribute no longer
supported) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14179.1.2.12.1.17 |
| agentPortGarpLeaveTime obsolete The GARP Leave time, in centiseconds.(Attribute no
longer supported) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14179.1.2.12.1.18 |
| agentPortGarpLeaveAllTime obsolete The GARP LeaveAll time, in centiseconds.(Attribute no
longer supported) | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14179.1.2.12.1.19 |
| agentPortIfIndex The switch's Port IfIndex | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14179.1.2.12.1.2 |
| agentPortMirrorMode The switch's Port Mirror Mode. If enabled, then
this is the port that the packets are mirrored
to. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.20 |
| agentPortMulticastApplianceMode The Port Multicast Appliance Mode. If enabled,
then this port allows multicast streams through
it. At a time, a maximum of four ports including
the gigabit ethernet port can have … | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.21 |
| agentPortIanaType The switch's Port Type | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.14179.1.2.12.1.3 |
| agentPortSTPMode The switch's Port Spanning Tree Protocol Mode
STP mode values are:
dot1d (the default)
fast, indicates you want to use the fast
spanning tree mode
off, indicates the STP mode is t… | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.4 |
| agentPortOperationalStatus The current operational state of the port. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.40 |
| agentPortSTPState The switch's Port Spanning Tree Protocol State | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.5 |
| agentPortAdminMode The switch's Port Admin Mode | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.6 |
| agentPortPhysicalMode deprecated The switch's Port Speed Mode. This is the
configured physical mode.This object is
read-only for gigabit ports.
Deprecated by clsPortModePhysicalMode. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.7 |
| agentPortPhysicalStatus deprecated The switch's Port Physical Speed Status.This
is the current actual speed.
Deprecated by clsPortModePhysicalStatus. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.8 |
| agentPortLinkTrapMode If enabled, link up and link down traps will be
sent for this port. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.12.1.9 |