agentInterfacePortNo
AIRESPACE-SWITCHING-MIB ·
.1.3.6.1.4.1.14179.1.2.13.1.8
Object
column
r/w
Integer32
A value 0 means the port is not set. The valid value can be any one of the physical ports on the switch. This is the primary port configured on the interface.
Context
- MIB
- AIRESPACE-SWITCHING-MIB
- OID
.1.3.6.1.4.1.14179.1.2.13.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentInterfaceConfigEntry
- Table
- agentInterfaceConfigTable
- Siblings
- 17
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentInterfaceName Interace Name. This values is 'management' for DS
port, 'service-port' for service port and 'virtual'
for virtual gateway. For other interfaces, the name
can be anything. These in… | column | OctetString | .1.3.6.1.4.1.14179.1.2.13.1.1 |
| agentInterfaceSecondaryDhcpAddress Secondary DHCP Server IP Address for the interface.
This applies to the management interface and other
dynamic interfaces. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.1.2.13.1.10 |
| agentInterfaceDhcpProtocol The interface's DHCP protocol. This applies only
to the service port interface. | column | Enumeration | .1.3.6.1.4.1.14179.1.2.13.1.11 |
| agentInterfaceDnsHostName The DNS host name for the Virtual Interface.
This attribute is not valid for other
interfaces. | column | OctetString | .1.3.6.1.4.1.14179.1.2.13.1.12 |
| agentInterfaceAclName Name of the Access Control List applied to the
interface. This attribute is applicable only to
the management interface and other dynamic
interfaces. If it is required to remove t… | column | OctetString | .1.3.6.1.4.1.14179.1.2.13.1.13 |
| agentInterfaceAPManagementFeature When enabled, the dynamic interface can be used for AP
management. SNMP support for AP management through
dynamic interfaces has been introduced since '3.0.21.0'
release. Only ap… | column | Enumeration | .1.3.6.1.4.1.14179.1.2.13.1.14 |
| agentInterfaceActivePortNo This is the currently active port for this
interface. | column | Integer32 | .1.3.6.1.4.1.14179.1.2.13.1.15 |
| agentInterfaceBackupPortNo This values is valid only for the 4200 series of
switches. The backup port is the port this interface
is moved to once the primary port fails. A value 0
means the port is not set… | column | Integer32 | .1.3.6.1.4.1.14179.1.2.13.1.16 |
| agentInterfaceVlanQuarantine This object is used to configure the health of the
interface identified by agentInterfaceName.
A value of 'true' is used to indicate that this
particular interface … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14179.1.2.13.1.17 |
| agentInterfaceVlanId Vlan ID configured for the Interface. | column | Integer32 | .1.3.6.1.4.1.14179.1.2.13.1.2 |
| agentInterfaceType The interface's type. The static type is set for
the interfaces that are created by default on the
switch and these cannot be deleted. Any other
interface that is created is of ty… | column | Enumeration | .1.3.6.1.4.1.14179.1.2.13.1.3 |
| agentInterfaceRowStatus The interface entry Row status. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.14179.1.2.13.1.31 |
| agentInterfaceMacAddress Interface MAC Address. This is only applicable in
case of management and service-port interfaces. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14179.1.2.13.1.4 |
| agentInterfaceIPAddress IP Address of the interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.1.2.13.1.5 |
| agentInterfaceIPNetmask IP Netmask of the interface. This is 0 for the
virtual interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.1.2.13.1.6 |
| agentInterfaceIPGateway IP Gateway of the interface. This is 0 for virtual
and service-port interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.1.2.13.1.7 |
| agentInterfacePrimaryDhcpAddress Primary DHCP Server IP Address for the interface
This applies to the management interface and other
dynamic interfaces. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.1.2.13.1.9 |