agentSnmpCommunityIPMask
AIRESPACE-SWITCHING-MIB ·
.1.3.6.1.4.1.14179.1.2.5.5.1.3
Object
The switch's Snmp Community IP Mask Client IP Mask - This attribute is a mask to be logical-ANDed with the requesting entity's IP address before comparison with the Client IP Address. If the result matches with Client IP Address then the address is an authenticated IP address. For example, if the Client IP Address is 9.47.128.0 and the corresponding Client IP Mask is 255.255.255.0, a range of incoming IP addresses would match, that is, the incoming IP addresses could be a value in the following range: 9.47.128.0 to 9.47.128.255. To have a specific IP address be the only authenticated IP address, set the Client IP Address to the required IP address and set the Client IP Mask to 255.255.255.255.
Context
- MIB
- AIRESPACE-SWITCHING-MIB
- OID
.1.3.6.1.4.1.14179.1.2.5.5.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentSnmpCommunityConfigEntry
- Table
- agentSnmpCommunityConfigTable
- Siblings
- 8
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentSnmpCommunityName The switch's Snmp Community Name
This name identifies each SNMP community;
the name can be up to 16 characters, and it is
case-sensitive. Community names in the SNMP
community mus… | column | OctetString | .1.3.6.1.4.1.14179.1.2.5.5.1.1 |
| agentSnmpCommunityIPAddress The switch's Snmp Community IP Address
Client IP Address - This attribute is an IP
address (or portion thereof) from which this
device will accept SNMP packets with the
associated… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14179.1.2.5.5.1.2 |
| agentSnmpCommunityStatus The switch's Snmp Community Status.
active(1) - This community is active,
allowing SNMP manager
associated
with thi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.14179.1.2.5.5.1.25 |
| agentSnmpCommunityAccessMode The switch's Snmp Community Access Mode
Access Mode - This value can be readOnly or
readWrite. A community with a read-only access
allows for switch information to be displayed.
… | column | Enumeration | .1.3.6.1.4.1.14179.1.2.5.5.1.4 |
| agentSnmpCommunityEnabled If community is Enabled | column | Enumeration | .1.3.6.1.4.1.14179.1.2.5.5.1.5 |
| agentSnmpCommunityInetAddressType This object represents the type of the primary
controller's address made available through
agentSnmpCommunityInetAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.14179.1.2.5.5.1.6 |
| agentSnmpCommunityInetAddress This object represents the address from which this
device will accept SNMP packets with the
associated community. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.14179.1.2.5.5.1.7 |
| agentSnmpCommunityPrefixLength This object denotes the prefix length for
Inet address which is a mask
to be logical-ANDed with the requesting entity's
IPv6 address before comparison with the Client IP… | column | Unsigned32 | .1.3.6.1.4.1.14179.1.2.5.5.1.8 |