agentInterfaceAclName

AIRESPACE-SWITCHING-MIB · .1.3.6.1.4.1.14179.1.2.13.1.13
MIB view Table view

Object

column r/w OctetString 
Name of the Access Control List applied to the
interface. This attribute is applicable only to
the management interface and other dynamic
interfaces. If it is required to remove the ACL
name for an interface, it should be set to an
empty string.

Context

MIB
AIRESPACE-SWITCHING-MIB
OID
.1.3.6.1.4.1.14179.1.2.13.1.13
Type
column
Access
readwrite
Status
current
Parent
agentInterfaceConfigEntry
Table
agentInterfaceConfigTable
Siblings
17

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentInterfaceName
Interace Name. This values is 'management' for DS port, 'service-port' for service port and 'virtual' for virtual gateway. For other interfaces, the name can be anything. These in…
columnOctetString.1.3.6.1.4.1.14179.1.2.13.1.1
agentInterfaceSecondaryDhcpAddress
Secondary DHCP Server IP Address for the interface. This applies to the management interface and other dynamic interfaces.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.14179.1.2.13.1.10
agentInterfaceDhcpProtocol
The interface's DHCP protocol. This applies only to the service port interface.
columnEnumeration.1.3.6.1.4.1.14179.1.2.13.1.11
agentInterfaceDnsHostName
The DNS host name for the Virtual Interface. This attribute is not valid for other interfaces.
columnOctetString.1.3.6.1.4.1.14179.1.2.13.1.12
agentInterfaceAPManagementFeature
When enabled, the dynamic interface can be used for AP management. SNMP support for AP management through dynamic interfaces has been introduced since '3.0.21.0' release. Only ap…
columnEnumeration.1.3.6.1.4.1.14179.1.2.13.1.14
agentInterfaceActivePortNo
This is the currently active port for this interface.
columnInteger32.1.3.6.1.4.1.14179.1.2.13.1.15
agentInterfaceBackupPortNo
This values is valid only for the 4200 series of switches. The backup port is the port this interface is moved to once the primary port fails. A value 0 means the port is not set…
columnInteger32.1.3.6.1.4.1.14179.1.2.13.1.16
agentInterfaceVlanQuarantine
This object is used to configure the health of the interface identified by agentInterfaceName. A value of 'true' is used to indicate that this particular interface …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.14179.1.2.13.1.17
agentInterfaceVlanId
Vlan ID configured for the Interface.
columnInteger32.1.3.6.1.4.1.14179.1.2.13.1.2
agentInterfaceType
The interface's type. The static type is set for the interfaces that are created by default on the switch and these cannot be deleted. Any other interface that is created is of ty…
columnEnumeration.1.3.6.1.4.1.14179.1.2.13.1.3
agentInterfaceRowStatus
The interface entry Row status.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.14179.1.2.13.1.31
agentInterfaceMacAddress
Interface MAC Address. This is only applicable in case of management and service-port interfaces.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.14179.1.2.13.1.4
agentInterfaceIPAddress
IP Address of the interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.14179.1.2.13.1.5
agentInterfaceIPNetmask
IP Netmask of the interface. This is 0 for the virtual interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.14179.1.2.13.1.6
agentInterfaceIPGateway
IP Gateway of the interface. This is 0 for virtual and service-port interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.14179.1.2.13.1.7
agentInterfacePortNo
A value 0 means the port is not set. The valid value can be any one of the physical ports on the switch. This is the primary port configured on the interface.
columnInteger32.1.3.6.1.4.1.14179.1.2.13.1.8
agentInterfacePrimaryDhcpAddress
Primary DHCP Server IP Address for the interface This applies to the management interface and other dynamic interfaces.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.14179.1.2.13.1.9