icModvoltrnge
OMNITRON-TRAP-MIB ·
.1.3.6.1.4.1.7342.0.8
Object
notification
Module Voltage Range - for modules with voltage sensing capabilities this trap indicates the voltage is outside of the acceptable limits defined for the voltage being sensed
Context
- MIB
- OMNITRON-TRAP-MIB
- OID
.1.3.6.1.4.1.7342.0.8- Type
- notification
- Status
- current
- Parent
- omnitronNotifications
- Siblings
- 148
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| icModcoldstrt Module Cold Start - a module has been plugged into a chassis | notification | - | .1.3.6.1.4.1.7342.0.1 |
| icModpwrapply Module Power Applied - A power supply's cord was not supplying power
and now it is. The supply is generating voltage. (for chassis with
multiple supplies) | notification | - | .1.3.6.1.4.1.7342.0.10 |
| icRemoteLost Remote Unit Lost. | notification | - | .1.3.6.1.4.1.7342.0.100 |
| icRemoteError Remote Unit Error Detected. | notification | - | .1.3.6.1.4.1.7342.0.101 |
| icRemoteGood Remote Unit Good Detected. | notification | - | .1.3.6.1.4.1.7342.0.102 |
| icExternalClockLost The external clock source has been lost. | notification | - | .1.3.6.1.4.1.7342.0.103 |
| icSerStart Serial Session Started. | notification | - | .1.3.6.1.4.1.7342.0.104 |
| icSerStop Serial Session Stopped. | notification | - | .1.3.6.1.4.1.7342.0.105 |
| icSFPOverPower SFP is consuming too much power. | notification | - | .1.3.6.1.4.1.7342.0.106 |
| icRemoteTestActivation Remote Test Activation - test mode entered on remote device. | notification | - | .1.3.6.1.4.1.7342.0.107 |
| icRemoteTestDeactivation Remote Test Deactivation - test mode exited on remote device. | notification | - | .1.3.6.1.4.1.7342.0.108 |
| icLocalTestActivation Local Test Activation - test mode entered on local device. | notification | - | .1.3.6.1.4.1.7342.0.109 |
| icAuthfail Data Manager Authentication Failure - The name and password supplied to
the SNMP agent did not match the ones configured into the data
manager's user-settings. | notification | - | .1.3.6.1.4.1.7342.0.11 |
| icLocalTestDeactivation Local Test Deactivation - test mode exited on local device. | notification | - | .1.3.6.1.4.1.7342.0.110 |
| icAuthSshFail SSH Authentication Failure - Authentication type/password did not match
configured setting. | notification | - | .1.3.6.1.4.1.7342.0.111 |
| icSshStart SSH Session Started - The management module has detected that a SSH
session has started. | notification | - | .1.3.6.1.4.1.7342.0.112 |
| icSshStop SSH Session Stopped - The management module has detected that a SSH
session has stopped. | notification | - | .1.3.6.1.4.1.7342.0.113 |
| icFileCorrupt Configuration File Corrupted - The management module has detected a
corrupted configuration file. | notification | - | .1.3.6.1.4.1.7342.0.114 |
| icProtectionSwitch Protection Switch - trap generated when a protection switch occurs. | notification | - | .1.3.6.1.4.1.7342.0.115 |
| icProtectionMismatch Protection Configuration Mismatch - trap generated when a protection
configuration mismatch occurs. | notification | - | .1.3.6.1.4.1.7342.0.116 |
| icFanNoRpm Fan Rotation Not Detected - Detected no or low RPMs generated from the
fan. | notification | - | .1.3.6.1.4.1.7342.0.117 |
| icFanHighRpm Fan Rotation High Threshold - Detected fan rotation speed is high. | notification | - | .1.3.6.1.4.1.7342.0.118 |
| icFpgaFailure FPGA Failure - FPGA initialization failure. | notification | - | .1.3.6.1.4.1.7342.0.119 |
| icFanNormalRpm Fan Rotation Normal - Detected normal fan rotation speed | notification | - | .1.3.6.1.4.1.7342.0.120 |
| ic1588SyncGained 1588 Synchronization - Synchronization with 1588 master is gained | notification | - | .1.3.6.1.4.1.7342.0.121 |
| ic1588SyncLost 1588 Synchronization - Synchronization with 1588 master is lost | notification | - | .1.3.6.1.4.1.7342.0.122 |
| ic1588PrimaryActive 1588 Master - Primary Master is Active | notification | - | .1.3.6.1.4.1.7342.0.123 |
| ic1588PrimaryInactive 1588 Master - Primary Master Inactive | notification | - | .1.3.6.1.4.1.7342.0.124 |
| ic1588SecondaryActive 1588 Master - Secondary Master Active | notification | - | .1.3.6.1.4.1.7342.0.125 |
| ic1588SecondaryInactive 1588 Master - Secondary Master Inactive | notification | - | .1.3.6.1.4.1.7342.0.126 |
| icSyncEthernetSourceGained Synchronous Ethernet - Synchronous Ethernet Clock Source Gained | notification | - | .1.3.6.1.4.1.7342.0.127 |
| icSyncEthernetSourceLost Synchronous Ethernet - Synchronous Ethernet Clock Source Lost | notification | - | .1.3.6.1.4.1.7342.0.128 |
| icSyncEthernetHoldoverLost Synchronous Ethernet - Synchronous Ethernet Clock Holdover Lost | notification | - | .1.3.6.1.4.1.7342.0.129 |
| icChasnew Chassis New - a new chassis has been added to the system | notification | - | .1.3.6.1.4.1.7342.0.13 |
| icAisAlarm AIS State Change - OAM AIS reception or transmission state has changed | notification | - | .1.3.6.1.4.1.7342.0.130 |
| icLckAlarm LCK State Change - OAM ETH-LCK reception or transmission state has
changed | notification | - | .1.3.6.1.4.1.7342.0.131 |
| icThresholdCrossing Threshold Crossing - Performance Criteria Measurement not met. This
trap should be generated at most once every 5 minutes. | notification | - | .1.3.6.1.4.1.7342.0.132 |
| icThresholdCrossingClear Threshold Crossing - Performance Criteria Measurement met | notification | - | .1.3.6.1.4.1.7342.0.133 |
| icTdmClockStatusChange TDM Clock Status Change - Status of TDM recovery clock changed | notification | - | .1.3.6.1.4.1.7342.0.134 |
| icTdmEthernetFrameCount TDM Ethernet Frame Count - Incorrect number of Ethernet frames | notification | - | .1.3.6.1.4.1.7342.0.135 |
| icSfpReceiveCdrLossLock SFP/XFP Receive CDR Loss of Lock | notification | - | .1.3.6.1.4.1.7342.0.136 |
| icSfpTransmitCdrLossLock SFP/XFP transmitted loses CDR lock | notification | - | .1.3.6.1.4.1.7342.0.137 |
| icDpoeStageWarningAlarm DPoE Stage warning alarm. Alarm is sent when the alarm state changes to
either set or clear. Only one stage warning alarm can be set at one
time. | notification | - | .1.3.6.1.4.1.7342.0.138 |
| icDpoeStageFailAlarm DPoE Stage failure alarm. Alarm is sent when the alarm state changes to
either set or clear. Only one stage fail alarm can be set at one time. | notification | - | .1.3.6.1.4.1.7342.0.139 |
| icChasgone Chassis Gone - a chassis has been removed from the system | notification | - | .1.3.6.1.4.1.7342.0.14 |
| icSfpReceiveCdrGainedLock SFP/XFP receiver gained CDR lock | notification | - | .1.3.6.1.4.1.7342.0.140 |
| icSfpTransmitCdrGainedLock SFP/XFP transmitted gained CDR lock | notification | - | .1.3.6.1.4.1.7342.0.141 |
| icModNormalTemp Module normal temperature | notification | - | .1.3.6.1.4.1.7342.0.142 |
| icModNormalVoltage Module normal voltage range | notification | - | .1.3.6.1.4.1.7342.0.143 |
| icPortNormalData Module data detected | notification | - | .1.3.6.1.4.1.7342.0.144 |
| icLinkOamRemoteLinkNormal 802.3ah remote link normal | notification | - | .1.3.6.1.4.1.7342.0.145 |
| icLinkOamLocalLinkNormal 802.3ah local link normal | notification | - | .1.3.6.1.4.1.7342.0.146 |
| icSfpNormal XFP/SFP normal | notification | - | .1.3.6.1.4.1.7342.0.147 |
| icPoEPdStatus PoE PD Status Change | notification | - | .1.3.6.1.4.1.7342.0.148 |
| icProbePriorityChange Generated when a Y.1731 probe priority changes.
Currently this is only valid for DMR reception.
'trapcode' indicates the probe instance number. | notification | - | .1.3.6.1.4.1.7342.0.149 |
| icAuthFtpFail FTP Authentication Failure - Authentication type/password did not match
configured setting. | notification | - | .1.3.6.1.4.1.7342.0.150 |
| icAclDeny ACL denial. Access is not allowed by configured ACL's. This trap
only to be generated at most once a minute. | notification | - | .1.3.6.1.4.1.7342.0.151 |
| icLinkOamDiscoveryComplete The module has detected Link OAM discovery completion on a port and is
generated when discovery completes. | notification | - | .1.3.6.1.4.1.7342.0.152 |
| icLinkOamDiscoveryLost The module has detected Link OAM discovery has been lost on a port and
is generated when a Link OAM discovery had previously been completed on
a port, but is now lost. | notification | - | .1.3.6.1.4.1.7342.0.153 |
| icServiceActivationTestInitiated The module has initiated a Service Activation Test: either a 2544 or
ITU-T Y.1564 test. | notification | - | .1.3.6.1.4.1.7342.0.154 |
| icServiceActivationTestCompleted The module has completed a Service Activation Test: either a 2544 or
ITU-T Y.1564 test. | notification | - | .1.3.6.1.4.1.7342.0.155 |
| icUtilizationThresholdViolation The module has detected a utilization threshold violation on a port or
a bandwidth profile. trapcode of 1-99 indicate a port threshold
violation. trapcode of 101-164 indicate the … | notification | - | .1.3.6.1.4.1.7342.0.156 |
| icUtilizationThresholdNormal The module has detected a utilization threshold violation has cleared
on a port or a bandwidth profile number.
This trap can only be generated once a threshold violatio… | notification | - | .1.3.6.1.4.1.7342.0.157 |
| icLoopPreventionBlock The module has detected loop condition and a loop prevention block on
the port has occurred. | notification | - | .1.3.6.1.4.1.7342.0.158 |
| icLoopPreventionClear The module has detected that a loop condition has been cleared and
the loop prevention block on the port has been removed. | notification | - | .1.3.6.1.4.1.7342.0.159 |
| icModremove Module Remove - a module has been removed from chassis | notification | - | .1.3.6.1.4.1.7342.0.16 |
| icAuthTelnetFail Telnet Authentication Failure - Telnet user name and/or password did not
match. | notification | - | .1.3.6.1.4.1.7342.0.160 |
| icRingProtectStateChange The module has detected a Ring Protection port state change. | notification | - | .1.3.6.1.4.1.7342.0.161 |
| icPriAct Primary Link up | notification | - | .1.3.6.1.4.1.7342.0.17 |
| icPriDis Primary Link down | notification | - | .1.3.6.1.4.1.7342.0.18 |
| icSecAct Secondary Link up | notification | - | .1.3.6.1.4.1.7342.0.19 |
| icModsftreset Module Reset - the module received a reset command from the chassis
data manager | notification | - | .1.3.6.1.4.1.7342.0.2 |
| icSecDis Secondary Link down | notification | - | .1.3.6.1.4.1.7342.0.20 |
| icTelStart Telnet Session Started | notification | - | .1.3.6.1.4.1.7342.0.21 |
| icTelStop Telnet Session Stopped | notification | - | .1.3.6.1.4.1.7342.0.22 |
| icFTPStart FTP Session Started | notification | - | .1.3.6.1.4.1.7342.0.23 |
| icFTPStop FTP Session Stopped | notification | - | .1.3.6.1.4.1.7342.0.24 |
| icStnAct Secondary Link Standby Up | notification | - | .1.3.6.1.4.1.7342.0.25 |
| icStnDis Secondary Link Standby Down | notification | - | .1.3.6.1.4.1.7342.0.26 |
| icPwdExceeded Password Count Exceeded | notification | - | .1.3.6.1.4.1.7342.0.27 |
| icROMchecksum Flash checksum error | notification | - | .1.3.6.1.4.1.7342.0.28 |
| icROMFileType Flash file type incorrect | notification | - | .1.3.6.1.4.1.7342.0.29 |
| icModlinkdown Module Link Down - the module went from a link to a no link condition | notification | - | .1.3.6.1.4.1.7342.0.3 |
| icROMProgFail Flash program failure | notification | - | .1.3.6.1.4.1.7342.0.30 |
| icROMFileChecksum Flash file transmission error | notification | - | .1.3.6.1.4.1.7342.0.31 |
| icModuleFlashProgramComplete Module programming completed OK | notification | - | .1.3.6.1.4.1.7342.0.32 |
| icDyingGasp Power failure detected, system shutting down | notification | - | .1.3.6.1.4.1.7342.0.33 |
| icKeepAlive Periodic trap to let management applications know device is still
active | notification | - | .1.3.6.1.4.1.7342.0.34 |
| icVlanCfgChange Module VLAN information has been changed | notification | - | .1.3.6.1.4.1.7342.0.35 |
| icAISdetected AIS Detected | notification | - | .1.3.6.1.4.1.7342.0.36 |
| icPRBSdetected PRBS Detected | notification | - | .1.3.6.1.4.1.7342.0.37 |
| icChassisMastershipAcquired Management module has acquired mastership of the backplane | notification | - | .1.3.6.1.4.1.7342.0.39 |
| icModlinkup Module Link Up - the module went from no link to a link condition | notification | - | .1.3.6.1.4.1.7342.0.4 |
| icSecureModeChange Module has switched secure mode
trapcode 0: secure -> normal (NMM master)
trapcode 1: normal -> secure (NMM master)
trapcode 2: secure -> normal (secure proxy)
trapcode 3: normal … | notification | - | .1.3.6.1.4.1.7342.0.40 |
| icChassisMastershipRelinquished Management module has relinquished mastership of the backplane | notification | - | .1.3.6.1.4.1.7342.0.41 |
| icSFPDeviceInserted A SFP Device Inserted | notification | - | .1.3.6.1.4.1.7342.0.42 |
| icSFPDeviceRemoved A SFP Device Removed | notification | - | .1.3.6.1.4.1.7342.0.43 |
| icAHEventNotificationGenerated AH Link Event has been generated | notification | - | .1.3.6.1.4.1.7342.0.44 |
| icAHEventNotificationReceived AH Link Event has been received | notification | - | .1.3.6.1.4.1.7342.0.45 |
| icContactStatusChange Contact closure status change detected | notification | - | .1.3.6.1.4.1.7342.0.46 |
| icAHLinkFaultReceived A link fault has been received over AH connection | notification | - | .1.3.6.1.4.1.7342.0.47 |
| icAHCriticalEventGenerated A critical event has been generated | notification | - | .1.3.6.1.4.1.7342.0.48 |
| icAHCriticalEventReceived A critical event has been received | notification | - | .1.3.6.1.4.1.7342.0.49 |
| icModdipsw Module Dip Switch Change - the dip switches on the module were changed | notification | - | .1.3.6.1.4.1.7342.0.5 |
| icAHRemoteDyingGasp Power failure detected from remote partner, system shutting down | notification | - | .1.3.6.1.4.1.7342.0.50 |
| icResource Generated when an internal resource is fully allocated. Specific
resource is defined by the Trap code. | notification | - | .1.3.6.1.4.1.7342.0.51 |
| icLoopbackReplyReceived Generated when the T1/E1, T3/E3 remote module responds to a loopback
request | notification | - | .1.3.6.1.4.1.7342.0.52 |
| icLoopbackReplyLost Generated when the T1/E1, T3/E3 remote module stops sending a loopback
reply | notification | - | .1.3.6.1.4.1.7342.0.53 |
| icCfmFaultAlarm Generated when an 802.1ag MEP has a persistent defect condition,
trapcode has the port number | notification | - | .1.3.6.1.4.1.7342.0.54 |
| icCfmLoopBackComplete Generated when an 802.1ag loopback command has completed. | notification | - | .1.3.6.1.4.1.7342.0.55 |
| icCfmLinkTraceComplete Generated when an 802.1ag Link Trace command has completed. | notification | - | .1.3.6.1.4.1.7342.0.56 |
| icCfmMepUp Generated when an 802.1ag MEP is discovered, service is restored, or
status of report port changes. | notification | - | .1.3.6.1.4.1.7342.0.57 |
| icCfmMepDown Generated when an 802.1ag MEP timeout occurs. | notification | - | .1.3.6.1.4.1.7342.0.58 |
| icCfmMepCrossConnect Generated when an 802.1ag service ID does not match the VLAN or is at
a lower MD level. | notification | - | .1.3.6.1.4.1.7342.0.59 |
| icModsoftcfg Module Configuration Change - the module configuration was changed by
external software and the hardware configuration may no longer
reflect its true state | notification | - | .1.3.6.1.4.1.7342.0.6 |
| icCfmLoop Generated when an 802.1ag MEP receives its own CCM or MEPID. | notification | - | .1.3.6.1.4.1.7342.0.60 |
| icCfmConfigError Generated when an 802.1ag MEP receives an incorrect CCM. | notification | - | .1.3.6.1.4.1.7342.0.61 |
| icCfmAllMepsUp Generated when all 802.1ag expected MEPs are up in time. | notification | - | .1.3.6.1.4.1.7342.0.62 |
| icCfmMepUnknown Generated when an 802.1ag CCM is received from an unexpected MEP. | notification | - | .1.3.6.1.4.1.7342.0.64 |
| icModovertemp Module Over Temperature - for modules with temperature sensing
capabilities this trap indicates the temperature is over the acceptable
limits for the module | notification | - | .1.3.6.1.4.1.7342.0.7 |
| icSfpTxLow Generated when the measured Tx power is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.73 |
| icSfpTxHigh Generated when the measured Tx power is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.74 |
| icSfpBiasLow Generated when the measured bias voltage is less than the low
threshold. | notification | - | .1.3.6.1.4.1.7342.0.75 |
| icSfpBiasHigh Generated when the measured bias voltage is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.76 |
| icSfpVcc3Low Generated when the measured voltage is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.77 |
| icSfpVcc3High Generated when the measured voltage is greater than the high threshold. | notification | - | .1.3.6.1.4.1.7342.0.78 |
| icSfpTempLow Generated when the measured temperature is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.79 |
| icSfpTempHigh Generated when the measured temperature is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.80 |
| icSfpAux2Low Generated when the measured Aux 2 value is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.81 |
| icSfpAux2High Generated when the measured Aux 2 value is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.82 |
| icSfpAux1Low Generated when the measured Aux 1 value is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.83 |
| icSfpAux1High Generated when the measured Aux 1 value is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.84 |
| icSfpRxLow Generated when the measured Rx power is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.85 |
| icSfpRxHigh Generated when the measured Rx power is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.86 |
| icSfpVcc2Low Generated when the measured voltage is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.87 |
| icSfpVcc2High Generated when the measured voltage is greater than the high threshold. | notification | - | .1.3.6.1.4.1.7342.0.88 |
| icSfpVcc5Low Generated when the measured voltage is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.89 |
| icModpwrremv Module Power Removed - A power supply's cord is no longer supplying
power to it and the supply is no longer generating voltage. (For
chassis with multiple supplies) | notification | - | .1.3.6.1.4.1.7342.0.9 |
| icSfpVcc5High Generated when the measured voltage is greater than the high threshold. | notification | - | .1.3.6.1.4.1.7342.0.90 |
| icLineChange OST equivalent of the DS1 MIB dsx1LineStatusChange. | notification | - | .1.3.6.1.4.1.7342.0.91 |
| icConfigChange Configuration change has been committed to flash. | notification | - | .1.3.6.1.4.1.7342.0.92 |
| icLoopbackActivation Loopback Activation - loopback mode entered on remote device. | notification | - | .1.3.6.1.4.1.7342.0.93 |
| icLoopbackDeactivation Loopback Deactivation - normal mode entered on remote device. | notification | - | .1.3.6.1.4.1.7342.0.94 |
| icTimingError Timing Error or Clock Slip. | notification | - | .1.3.6.1.4.1.7342.0.95 |
| icFramingOverrun Data Framing Overrun. | notification | - | .1.3.6.1.4.1.7342.0.96 |
| icDataUnderrun Data Framing Under run. | notification | - | .1.3.6.1.4.1.7342.0.97 |
| icRemoteFound Remote Unit Found. | notification | - | .1.3.6.1.4.1.7342.0.98 |
| icHardwareFault Module Hardware Failure | notification | - | .1.3.6.1.4.1.7342.0.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapchassis Chassis number of module that generated the trap | scalar | Integer32 | .1.3.6.1.4.1.7342.1.2 |
| trapslot Slot number of module that generated the trap | scalar | Integer32 | .1.3.6.1.4.1.7342.1.3 |
| trapcode Type of extended trap | scalar | Integer32 | .1.3.6.1.4.1.7342.1.4 |
| trapip IPv4 address of the trap source. If an IPv6 address is configured the
return value is either 0.0.0.0 or 255.255.255.255. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.1.5 |
| trapmoduledescription The module description | scalar | OctetString | .1.3.6.1.4.1.7342.1.7 |
| trapmodetype The module Mode Type | scalar | OMNITRON-TC-MIBOstModeType | .1.3.6.1.4.1.7342.1.9 |
| trapIpString IPv6 or IPv4 address of the trap source. If no address is configured the
value returned is 0.0.0.0 or 255.255.255.255. | scalar | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.1.10 |