icChassisMastershipAcquired

OMNITRON-TRAP-MIB · .1.3.6.1.4.1.7342.0.39
MIB view Table view

Object

notification 
Management module has acquired mastership of the backplane

Context

MIB
OMNITRON-TRAP-MIB
OID
.1.3.6.1.4.1.7342.0.39
Type
notification
Status
current
Parent
omnitronNotifications
Siblings
148

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
icModcoldstrt
Module Cold Start - a module has been plugged into a chassis
notification-.1.3.6.1.4.1.7342.0.1
icModpwrapply
Module Power Applied - A power supply's cord was not supplying power and now it is. The supply is generating voltage. (for chassis with multiple supplies)
notification-.1.3.6.1.4.1.7342.0.10
icRemoteLost
Remote Unit Lost.
notification-.1.3.6.1.4.1.7342.0.100
icRemoteError
Remote Unit Error Detected.
notification-.1.3.6.1.4.1.7342.0.101
icRemoteGood
Remote Unit Good Detected.
notification-.1.3.6.1.4.1.7342.0.102
icExternalClockLost
The external clock source has been lost.
notification-.1.3.6.1.4.1.7342.0.103
icSerStart
Serial Session Started.
notification-.1.3.6.1.4.1.7342.0.104
icSerStop
Serial Session Stopped.
notification-.1.3.6.1.4.1.7342.0.105
icSFPOverPower
SFP is consuming too much power.
notification-.1.3.6.1.4.1.7342.0.106
icRemoteTestActivation
Remote Test Activation - test mode entered on remote device.
notification-.1.3.6.1.4.1.7342.0.107
icRemoteTestDeactivation
Remote Test Deactivation - test mode exited on remote device.
notification-.1.3.6.1.4.1.7342.0.108
icLocalTestActivation
Local Test Activation - test mode entered on local device.
notification-.1.3.6.1.4.1.7342.0.109
icAuthfail
Data Manager Authentication Failure - The name and password supplied to the SNMP agent did not match the ones configured into the data manager's user-settings.
notification-.1.3.6.1.4.1.7342.0.11
icLocalTestDeactivation
Local Test Deactivation - test mode exited on local device.
notification-.1.3.6.1.4.1.7342.0.110
icAuthSshFail
SSH Authentication Failure - Authentication type/password did not match configured setting.
notification-.1.3.6.1.4.1.7342.0.111
icSshStart
SSH Session Started - The management module has detected that a SSH session has started.
notification-.1.3.6.1.4.1.7342.0.112
icSshStop
SSH Session Stopped - The management module has detected that a SSH session has stopped.
notification-.1.3.6.1.4.1.7342.0.113
icFileCorrupt
Configuration File Corrupted - The management module has detected a corrupted configuration file.
notification-.1.3.6.1.4.1.7342.0.114
icProtectionSwitch
Protection Switch - trap generated when a protection switch occurs.
notification-.1.3.6.1.4.1.7342.0.115
icProtectionMismatch
Protection Configuration Mismatch - trap generated when a protection configuration mismatch occurs.
notification-.1.3.6.1.4.1.7342.0.116
icFanNoRpm
Fan Rotation Not Detected - Detected no or low RPMs generated from the fan.
notification-.1.3.6.1.4.1.7342.0.117
icFanHighRpm
Fan Rotation High Threshold - Detected fan rotation speed is high.
notification-.1.3.6.1.4.1.7342.0.118
icFpgaFailure
FPGA Failure - FPGA initialization failure.
notification-.1.3.6.1.4.1.7342.0.119
icFanNormalRpm
Fan Rotation Normal - Detected normal fan rotation speed
notification-.1.3.6.1.4.1.7342.0.120
ic1588SyncGained
1588 Synchronization - Synchronization with 1588 master is gained
notification-.1.3.6.1.4.1.7342.0.121
ic1588SyncLost
1588 Synchronization - Synchronization with 1588 master is lost
notification-.1.3.6.1.4.1.7342.0.122
ic1588PrimaryActive
1588 Master - Primary Master is Active
notification-.1.3.6.1.4.1.7342.0.123
ic1588PrimaryInactive
1588 Master - Primary Master Inactive
notification-.1.3.6.1.4.1.7342.0.124
ic1588SecondaryActive
1588 Master - Secondary Master Active
notification-.1.3.6.1.4.1.7342.0.125
ic1588SecondaryInactive
1588 Master - Secondary Master Inactive
notification-.1.3.6.1.4.1.7342.0.126
icSyncEthernetSourceGained
Synchronous Ethernet - Synchronous Ethernet Clock Source Gained
notification-.1.3.6.1.4.1.7342.0.127
icSyncEthernetSourceLost
Synchronous Ethernet - Synchronous Ethernet Clock Source Lost
notification-.1.3.6.1.4.1.7342.0.128
icSyncEthernetHoldoverLost
Synchronous Ethernet - Synchronous Ethernet Clock Holdover Lost
notification-.1.3.6.1.4.1.7342.0.129
icChasnew
Chassis New - a new chassis has been added to the system
notification-.1.3.6.1.4.1.7342.0.13
icAisAlarm
AIS State Change - OAM AIS reception or transmission state has changed
notification-.1.3.6.1.4.1.7342.0.130
icLckAlarm
LCK State Change - OAM ETH-LCK reception or transmission state has changed
notification-.1.3.6.1.4.1.7342.0.131
icThresholdCrossing
Threshold Crossing - Performance Criteria Measurement not met. This trap should be generated at most once every 5 minutes.
notification-.1.3.6.1.4.1.7342.0.132
icThresholdCrossingClear
Threshold Crossing - Performance Criteria Measurement met
notification-.1.3.6.1.4.1.7342.0.133
icTdmClockStatusChange
TDM Clock Status Change - Status of TDM recovery clock changed
notification-.1.3.6.1.4.1.7342.0.134
icTdmEthernetFrameCount
TDM Ethernet Frame Count - Incorrect number of Ethernet frames
notification-.1.3.6.1.4.1.7342.0.135
icSfpReceiveCdrLossLock
SFP/XFP Receive CDR Loss of Lock
notification-.1.3.6.1.4.1.7342.0.136
icSfpTransmitCdrLossLock
SFP/XFP transmitted loses CDR lock
notification-.1.3.6.1.4.1.7342.0.137
icDpoeStageWarningAlarm
DPoE Stage warning alarm. Alarm is sent when the alarm state changes to either set or clear. Only one stage warning alarm can be set at one time.
notification-.1.3.6.1.4.1.7342.0.138
icDpoeStageFailAlarm
DPoE Stage failure alarm. Alarm is sent when the alarm state changes to either set or clear. Only one stage fail alarm can be set at one time.
notification-.1.3.6.1.4.1.7342.0.139
icChasgone
Chassis Gone - a chassis has been removed from the system
notification-.1.3.6.1.4.1.7342.0.14
icSfpReceiveCdrGainedLock
SFP/XFP receiver gained CDR lock
notification-.1.3.6.1.4.1.7342.0.140
icSfpTransmitCdrGainedLock
SFP/XFP transmitted gained CDR lock
notification-.1.3.6.1.4.1.7342.0.141
icModNormalTemp
Module normal temperature
notification-.1.3.6.1.4.1.7342.0.142
icModNormalVoltage
Module normal voltage range
notification-.1.3.6.1.4.1.7342.0.143
icPortNormalData
Module data detected
notification-.1.3.6.1.4.1.7342.0.144
icLinkOamRemoteLinkNormal
802.3ah remote link normal
notification-.1.3.6.1.4.1.7342.0.145
icLinkOamLocalLinkNormal
802.3ah local link normal
notification-.1.3.6.1.4.1.7342.0.146
icSfpNormal
XFP/SFP normal
notification-.1.3.6.1.4.1.7342.0.147
icPoEPdStatus
PoE PD Status Change
notification-.1.3.6.1.4.1.7342.0.148
icProbePriorityChange
Generated when a Y.1731 probe priority changes. Currently this is only valid for DMR reception. 'trapcode' indicates the probe instance number.
notification-.1.3.6.1.4.1.7342.0.149
icAuthFtpFail
FTP Authentication Failure - Authentication type/password did not match configured setting.
notification-.1.3.6.1.4.1.7342.0.150
icAclDeny
ACL denial. Access is not allowed by configured ACL's. This trap only to be generated at most once a minute.
notification-.1.3.6.1.4.1.7342.0.151
icLinkOamDiscoveryComplete
The module has detected Link OAM discovery completion on a port and is generated when discovery completes.
notification-.1.3.6.1.4.1.7342.0.152
icLinkOamDiscoveryLost
The module has detected Link OAM discovery has been lost on a port and is generated when a Link OAM discovery had previously been completed on a port, but is now lost.
notification-.1.3.6.1.4.1.7342.0.153
icServiceActivationTestInitiated
The module has initiated a Service Activation Test: either a 2544 or ITU-T Y.1564 test.
notification-.1.3.6.1.4.1.7342.0.154
icServiceActivationTestCompleted
The module has completed a Service Activation Test: either a 2544 or ITU-T Y.1564 test.
notification-.1.3.6.1.4.1.7342.0.155
icUtilizationThresholdViolation
The module has detected a utilization threshold violation on a port or a bandwidth profile. trapcode of 1-99 indicate a port threshold violation. trapcode of 101-164 indicate the …
notification-.1.3.6.1.4.1.7342.0.156
icUtilizationThresholdNormal
The module has detected a utilization threshold violation has cleared on a port or a bandwidth profile number. This trap can only be generated once a threshold violatio…
notification-.1.3.6.1.4.1.7342.0.157
icLoopPreventionBlock
The module has detected loop condition and a loop prevention block on the port has occurred.
notification-.1.3.6.1.4.1.7342.0.158
icLoopPreventionClear
The module has detected that a loop condition has been cleared and the loop prevention block on the port has been removed.
notification-.1.3.6.1.4.1.7342.0.159
icModremove
Module Remove - a module has been removed from chassis
notification-.1.3.6.1.4.1.7342.0.16
icAuthTelnetFail
Telnet Authentication Failure - Telnet user name and/or password did not match.
notification-.1.3.6.1.4.1.7342.0.160
icRingProtectStateChange
The module has detected a Ring Protection port state change.
notification-.1.3.6.1.4.1.7342.0.161
icPriAct
Primary Link up
notification-.1.3.6.1.4.1.7342.0.17
icPriDis
Primary Link down
notification-.1.3.6.1.4.1.7342.0.18
icSecAct
Secondary Link up
notification-.1.3.6.1.4.1.7342.0.19
icModsftreset
Module Reset - the module received a reset command from the chassis data manager
notification-.1.3.6.1.4.1.7342.0.2
icSecDis
Secondary Link down
notification-.1.3.6.1.4.1.7342.0.20
icTelStart
Telnet Session Started
notification-.1.3.6.1.4.1.7342.0.21
icTelStop
Telnet Session Stopped
notification-.1.3.6.1.4.1.7342.0.22
icFTPStart
FTP Session Started
notification-.1.3.6.1.4.1.7342.0.23
icFTPStop
FTP Session Stopped
notification-.1.3.6.1.4.1.7342.0.24
icStnAct
Secondary Link Standby Up
notification-.1.3.6.1.4.1.7342.0.25
icStnDis
Secondary Link Standby Down
notification-.1.3.6.1.4.1.7342.0.26
icPwdExceeded
Password Count Exceeded
notification-.1.3.6.1.4.1.7342.0.27
icROMchecksum
Flash checksum error
notification-.1.3.6.1.4.1.7342.0.28
icROMFileType
Flash file type incorrect
notification-.1.3.6.1.4.1.7342.0.29
icModlinkdown
Module Link Down - the module went from a link to a no link condition
notification-.1.3.6.1.4.1.7342.0.3
icROMProgFail
Flash program failure
notification-.1.3.6.1.4.1.7342.0.30
icROMFileChecksum
Flash file transmission error
notification-.1.3.6.1.4.1.7342.0.31
icModuleFlashProgramComplete
Module programming completed OK
notification-.1.3.6.1.4.1.7342.0.32
icDyingGasp
Power failure detected, system shutting down
notification-.1.3.6.1.4.1.7342.0.33
icKeepAlive
Periodic trap to let management applications know device is still active
notification-.1.3.6.1.4.1.7342.0.34
icVlanCfgChange
Module VLAN information has been changed
notification-.1.3.6.1.4.1.7342.0.35
icAISdetected
AIS Detected
notification-.1.3.6.1.4.1.7342.0.36
icPRBSdetected
PRBS Detected
notification-.1.3.6.1.4.1.7342.0.37
icModlinkup
Module Link Up - the module went from no link to a link condition
notification-.1.3.6.1.4.1.7342.0.4
icSecureModeChange
Module has switched secure mode trapcode 0: secure -> normal (NMM master) trapcode 1: normal -> secure (NMM master) trapcode 2: secure -> normal (secure proxy) trapcode 3: normal …
notification-.1.3.6.1.4.1.7342.0.40
icChassisMastershipRelinquished
Management module has relinquished mastership of the backplane
notification-.1.3.6.1.4.1.7342.0.41
icSFPDeviceInserted
A SFP Device Inserted
notification-.1.3.6.1.4.1.7342.0.42
icSFPDeviceRemoved
A SFP Device Removed
notification-.1.3.6.1.4.1.7342.0.43
icAHEventNotificationGenerated
AH Link Event has been generated
notification-.1.3.6.1.4.1.7342.0.44
icAHEventNotificationReceived
AH Link Event has been received
notification-.1.3.6.1.4.1.7342.0.45
icContactStatusChange
Contact closure status change detected
notification-.1.3.6.1.4.1.7342.0.46
icAHLinkFaultReceived
A link fault has been received over AH connection
notification-.1.3.6.1.4.1.7342.0.47
icAHCriticalEventGenerated
A critical event has been generated
notification-.1.3.6.1.4.1.7342.0.48
icAHCriticalEventReceived
A critical event has been received
notification-.1.3.6.1.4.1.7342.0.49
icModdipsw
Module Dip Switch Change - the dip switches on the module were changed
notification-.1.3.6.1.4.1.7342.0.5
icAHRemoteDyingGasp
Power failure detected from remote partner, system shutting down
notification-.1.3.6.1.4.1.7342.0.50
icResource
Generated when an internal resource is fully allocated. Specific resource is defined by the Trap code.
notification-.1.3.6.1.4.1.7342.0.51
icLoopbackReplyReceived
Generated when the T1/E1, T3/E3 remote module responds to a loopback request
notification-.1.3.6.1.4.1.7342.0.52
icLoopbackReplyLost
Generated when the T1/E1, T3/E3 remote module stops sending a loopback reply
notification-.1.3.6.1.4.1.7342.0.53
icCfmFaultAlarm
Generated when an 802.1ag MEP has a persistent defect condition, trapcode has the port number
notification-.1.3.6.1.4.1.7342.0.54
icCfmLoopBackComplete
Generated when an 802.1ag loopback command has completed.
notification-.1.3.6.1.4.1.7342.0.55
icCfmLinkTraceComplete
Generated when an 802.1ag Link Trace command has completed.
notification-.1.3.6.1.4.1.7342.0.56
icCfmMepUp
Generated when an 802.1ag MEP is discovered, service is restored, or status of report port changes.
notification-.1.3.6.1.4.1.7342.0.57
icCfmMepDown
Generated when an 802.1ag MEP timeout occurs.
notification-.1.3.6.1.4.1.7342.0.58
icCfmMepCrossConnect
Generated when an 802.1ag service ID does not match the VLAN or is at a lower MD level.
notification-.1.3.6.1.4.1.7342.0.59
icModsoftcfg
Module Configuration Change - the module configuration was changed by external software and the hardware configuration may no longer reflect its true state
notification-.1.3.6.1.4.1.7342.0.6
icCfmLoop
Generated when an 802.1ag MEP receives its own CCM or MEPID.
notification-.1.3.6.1.4.1.7342.0.60
icCfmConfigError
Generated when an 802.1ag MEP receives an incorrect CCM.
notification-.1.3.6.1.4.1.7342.0.61
icCfmAllMepsUp
Generated when all 802.1ag expected MEPs are up in time.
notification-.1.3.6.1.4.1.7342.0.62
icCfmMepUnknown
Generated when an 802.1ag CCM is received from an unexpected MEP.
notification-.1.3.6.1.4.1.7342.0.64
icModovertemp
Module Over Temperature - for modules with temperature sensing capabilities this trap indicates the temperature is over the acceptable limits for the module
notification-.1.3.6.1.4.1.7342.0.7
icSfpTxLow
Generated when the measured Tx power is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.73
icSfpTxHigh
Generated when the measured Tx power is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.74
icSfpBiasLow
Generated when the measured bias voltage is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.75
icSfpBiasHigh
Generated when the measured bias voltage is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.76
icSfpVcc3Low
Generated when the measured voltage is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.77
icSfpVcc3High
Generated when the measured voltage is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.78
icSfpTempLow
Generated when the measured temperature is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.79
icModvoltrnge
Module Voltage Range - for modules with voltage sensing capabilities this trap indicates the voltage is outside of the acceptable limits defined for the voltage being sensed
notification-.1.3.6.1.4.1.7342.0.8
icSfpTempHigh
Generated when the measured temperature is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.80
icSfpAux2Low
Generated when the measured Aux 2 value is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.81
icSfpAux2High
Generated when the measured Aux 2 value is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.82
icSfpAux1Low
Generated when the measured Aux 1 value is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.83
icSfpAux1High
Generated when the measured Aux 1 value is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.84
icSfpRxLow
Generated when the measured Rx power is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.85
icSfpRxHigh
Generated when the measured Rx power is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.86
icSfpVcc2Low
Generated when the measured voltage is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.87
icSfpVcc2High
Generated when the measured voltage is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.88
icSfpVcc5Low
Generated when the measured voltage is less than the low threshold.
notification-.1.3.6.1.4.1.7342.0.89
icModpwrremv
Module Power Removed - A power supply's cord is no longer supplying power to it and the supply is no longer generating voltage. (For chassis with multiple supplies)
notification-.1.3.6.1.4.1.7342.0.9
icSfpVcc5High
Generated when the measured voltage is greater than the high threshold.
notification-.1.3.6.1.4.1.7342.0.90
icLineChange
OST equivalent of the DS1 MIB dsx1LineStatusChange.
notification-.1.3.6.1.4.1.7342.0.91
icConfigChange
Configuration change has been committed to flash.
notification-.1.3.6.1.4.1.7342.0.92
icLoopbackActivation
Loopback Activation - loopback mode entered on remote device.
notification-.1.3.6.1.4.1.7342.0.93
icLoopbackDeactivation
Loopback Deactivation - normal mode entered on remote device.
notification-.1.3.6.1.4.1.7342.0.94
icTimingError
Timing Error or Clock Slip.
notification-.1.3.6.1.4.1.7342.0.95
icFramingOverrun
Data Framing Overrun.
notification-.1.3.6.1.4.1.7342.0.96
icDataUnderrun
Data Framing Under run.
notification-.1.3.6.1.4.1.7342.0.97
icRemoteFound
Remote Unit Found.
notification-.1.3.6.1.4.1.7342.0.98
icHardwareFault
Module Hardware Failure
notification-.1.3.6.1.4.1.7342.0.99
Notification Objects
ObjectTypeSyntaxOID
trapchassis
Chassis number of module that generated the trap
scalarInteger32.1.3.6.1.4.1.7342.1.2
trapslot
Slot number of module that generated the trap
scalarInteger32.1.3.6.1.4.1.7342.1.3
trapcode
Type of extended trap
scalarInteger32.1.3.6.1.4.1.7342.1.4
trapip
IPv4 address of the trap source. If an IPv6 address is configured the return value is either 0.0.0.0 or 255.255.255.255.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.7342.1.5
trapmoduledescription
The module description
scalarOctetString.1.3.6.1.4.1.7342.1.7
trapmodetype
The module Mode Type
scalarOMNITRON-TC-MIBOstModeType.1.3.6.1.4.1.7342.1.9
trapIpString
IPv6 or IPv4 address of the trap source. If no address is configured the value returned is 0.0.0.0 or 255.255.255.255.
scalarOMNITRON-TC-MIBOstIpAddr.1.3.6.1.4.1.7342.1.10