icAclDeny
OMNITRON-TRAP-MIB ·
.1.3.6.1.4.1.7342.0.151
Object
notification
ACL denial. Access is not allowed by configured ACL's. This trap only to be generated at most once a minute.
Context
- MIB
- OMNITRON-TRAP-MIB
- OID
.1.3.6.1.4.1.7342.0.151- Type
- notification
- Status
- current
- Parent
- omnitronNotifications
- Siblings
- 148
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| icModcoldstrt Module Cold Start - a module has been plugged into a chassis | notification | - | .1.3.6.1.4.1.7342.0.1 |
| icModpwrapply Module Power Applied - A power supply's cord was not supplying power
and now it is. The supply is generating voltage. (for chassis with
multiple supplies) | notification | - | .1.3.6.1.4.1.7342.0.10 |
| icRemoteLost Remote Unit Lost. | notification | - | .1.3.6.1.4.1.7342.0.100 |
| icRemoteError Remote Unit Error Detected. | notification | - | .1.3.6.1.4.1.7342.0.101 |
| icRemoteGood Remote Unit Good Detected. | notification | - | .1.3.6.1.4.1.7342.0.102 |
| icExternalClockLost The external clock source has been lost. | notification | - | .1.3.6.1.4.1.7342.0.103 |
| icSerStart Serial Session Started. | notification | - | .1.3.6.1.4.1.7342.0.104 |
| icSerStop Serial Session Stopped. | notification | - | .1.3.6.1.4.1.7342.0.105 |
| icSFPOverPower SFP is consuming too much power. | notification | - | .1.3.6.1.4.1.7342.0.106 |
| icRemoteTestActivation Remote Test Activation - test mode entered on remote device. | notification | - | .1.3.6.1.4.1.7342.0.107 |
| icRemoteTestDeactivation Remote Test Deactivation - test mode exited on remote device. | notification | - | .1.3.6.1.4.1.7342.0.108 |
| icLocalTestActivation Local Test Activation - test mode entered on local device. | notification | - | .1.3.6.1.4.1.7342.0.109 |
| icAuthfail Data Manager Authentication Failure - The name and password supplied to
the SNMP agent did not match the ones configured into the data
manager's user-settings. | notification | - | .1.3.6.1.4.1.7342.0.11 |
| icLocalTestDeactivation Local Test Deactivation - test mode exited on local device. | notification | - | .1.3.6.1.4.1.7342.0.110 |
| icAuthSshFail SSH Authentication Failure - Authentication type/password did not match
configured setting. | notification | - | .1.3.6.1.4.1.7342.0.111 |
| icSshStart SSH Session Started - The management module has detected that a SSH
session has started. | notification | - | .1.3.6.1.4.1.7342.0.112 |
| icSshStop SSH Session Stopped - The management module has detected that a SSH
session has stopped. | notification | - | .1.3.6.1.4.1.7342.0.113 |
| icFileCorrupt Configuration File Corrupted - The management module has detected a
corrupted configuration file. | notification | - | .1.3.6.1.4.1.7342.0.114 |
| icProtectionSwitch Protection Switch - trap generated when a protection switch occurs. | notification | - | .1.3.6.1.4.1.7342.0.115 |
| icProtectionMismatch Protection Configuration Mismatch - trap generated when a protection
configuration mismatch occurs. | notification | - | .1.3.6.1.4.1.7342.0.116 |
| icFanNoRpm Fan Rotation Not Detected - Detected no or low RPMs generated from the
fan. | notification | - | .1.3.6.1.4.1.7342.0.117 |
| icFanHighRpm Fan Rotation High Threshold - Detected fan rotation speed is high. | notification | - | .1.3.6.1.4.1.7342.0.118 |
| icFpgaFailure FPGA Failure - FPGA initialization failure. | notification | - | .1.3.6.1.4.1.7342.0.119 |
| icFanNormalRpm Fan Rotation Normal - Detected normal fan rotation speed | notification | - | .1.3.6.1.4.1.7342.0.120 |
| ic1588SyncGained 1588 Synchronization - Synchronization with 1588 master is gained | notification | - | .1.3.6.1.4.1.7342.0.121 |
| ic1588SyncLost 1588 Synchronization - Synchronization with 1588 master is lost | notification | - | .1.3.6.1.4.1.7342.0.122 |
| ic1588PrimaryActive 1588 Master - Primary Master is Active | notification | - | .1.3.6.1.4.1.7342.0.123 |
| ic1588PrimaryInactive 1588 Master - Primary Master Inactive | notification | - | .1.3.6.1.4.1.7342.0.124 |
| ic1588SecondaryActive 1588 Master - Secondary Master Active | notification | - | .1.3.6.1.4.1.7342.0.125 |
| ic1588SecondaryInactive 1588 Master - Secondary Master Inactive | notification | - | .1.3.6.1.4.1.7342.0.126 |
| icSyncEthernetSourceGained Synchronous Ethernet - Synchronous Ethernet Clock Source Gained | notification | - | .1.3.6.1.4.1.7342.0.127 |
| icSyncEthernetSourceLost Synchronous Ethernet - Synchronous Ethernet Clock Source Lost | notification | - | .1.3.6.1.4.1.7342.0.128 |
| icSyncEthernetHoldoverLost Synchronous Ethernet - Synchronous Ethernet Clock Holdover Lost | notification | - | .1.3.6.1.4.1.7342.0.129 |
| icChasnew Chassis New - a new chassis has been added to the system | notification | - | .1.3.6.1.4.1.7342.0.13 |
| icAisAlarm AIS State Change - OAM AIS reception or transmission state has changed | notification | - | .1.3.6.1.4.1.7342.0.130 |
| icLckAlarm LCK State Change - OAM ETH-LCK reception or transmission state has
changed | notification | - | .1.3.6.1.4.1.7342.0.131 |
| icThresholdCrossing Threshold Crossing - Performance Criteria Measurement not met. This
trap should be generated at most once every 5 minutes. | notification | - | .1.3.6.1.4.1.7342.0.132 |
| icThresholdCrossingClear Threshold Crossing - Performance Criteria Measurement met | notification | - | .1.3.6.1.4.1.7342.0.133 |
| icTdmClockStatusChange TDM Clock Status Change - Status of TDM recovery clock changed | notification | - | .1.3.6.1.4.1.7342.0.134 |
| icTdmEthernetFrameCount TDM Ethernet Frame Count - Incorrect number of Ethernet frames | notification | - | .1.3.6.1.4.1.7342.0.135 |
| icSfpReceiveCdrLossLock SFP/XFP Receive CDR Loss of Lock | notification | - | .1.3.6.1.4.1.7342.0.136 |
| icSfpTransmitCdrLossLock SFP/XFP transmitted loses CDR lock | notification | - | .1.3.6.1.4.1.7342.0.137 |
| icDpoeStageWarningAlarm DPoE Stage warning alarm. Alarm is sent when the alarm state changes to
either set or clear. Only one stage warning alarm can be set at one
time. | notification | - | .1.3.6.1.4.1.7342.0.138 |
| icDpoeStageFailAlarm DPoE Stage failure alarm. Alarm is sent when the alarm state changes to
either set or clear. Only one stage fail alarm can be set at one time. | notification | - | .1.3.6.1.4.1.7342.0.139 |
| icChasgone Chassis Gone - a chassis has been removed from the system | notification | - | .1.3.6.1.4.1.7342.0.14 |
| icSfpReceiveCdrGainedLock SFP/XFP receiver gained CDR lock | notification | - | .1.3.6.1.4.1.7342.0.140 |
| icSfpTransmitCdrGainedLock SFP/XFP transmitted gained CDR lock | notification | - | .1.3.6.1.4.1.7342.0.141 |
| icModNormalTemp Module normal temperature | notification | - | .1.3.6.1.4.1.7342.0.142 |
| icModNormalVoltage Module normal voltage range | notification | - | .1.3.6.1.4.1.7342.0.143 |
| icPortNormalData Module data detected | notification | - | .1.3.6.1.4.1.7342.0.144 |
| icLinkOamRemoteLinkNormal 802.3ah remote link normal | notification | - | .1.3.6.1.4.1.7342.0.145 |
| icLinkOamLocalLinkNormal 802.3ah local link normal | notification | - | .1.3.6.1.4.1.7342.0.146 |
| icSfpNormal XFP/SFP normal | notification | - | .1.3.6.1.4.1.7342.0.147 |
| icPoEPdStatus PoE PD Status Change | notification | - | .1.3.6.1.4.1.7342.0.148 |
| icProbePriorityChange Generated when a Y.1731 probe priority changes.
Currently this is only valid for DMR reception.
'trapcode' indicates the probe instance number. | notification | - | .1.3.6.1.4.1.7342.0.149 |
| icAuthFtpFail FTP Authentication Failure - Authentication type/password did not match
configured setting. | notification | - | .1.3.6.1.4.1.7342.0.150 |
| icLinkOamDiscoveryComplete The module has detected Link OAM discovery completion on a port and is
generated when discovery completes. | notification | - | .1.3.6.1.4.1.7342.0.152 |
| icLinkOamDiscoveryLost The module has detected Link OAM discovery has been lost on a port and
is generated when a Link OAM discovery had previously been completed on
a port, but is now lost. | notification | - | .1.3.6.1.4.1.7342.0.153 |
| icServiceActivationTestInitiated The module has initiated a Service Activation Test: either a 2544 or
ITU-T Y.1564 test. | notification | - | .1.3.6.1.4.1.7342.0.154 |
| icServiceActivationTestCompleted The module has completed a Service Activation Test: either a 2544 or
ITU-T Y.1564 test. | notification | - | .1.3.6.1.4.1.7342.0.155 |
| icUtilizationThresholdViolation The module has detected a utilization threshold violation on a port or
a bandwidth profile. trapcode of 1-99 indicate a port threshold
violation. trapcode of 101-164 indicate the … | notification | - | .1.3.6.1.4.1.7342.0.156 |
| icUtilizationThresholdNormal The module has detected a utilization threshold violation has cleared
on a port or a bandwidth profile number.
This trap can only be generated once a threshold violatio… | notification | - | .1.3.6.1.4.1.7342.0.157 |
| icLoopPreventionBlock The module has detected loop condition and a loop prevention block on
the port has occurred. | notification | - | .1.3.6.1.4.1.7342.0.158 |
| icLoopPreventionClear The module has detected that a loop condition has been cleared and
the loop prevention block on the port has been removed. | notification | - | .1.3.6.1.4.1.7342.0.159 |
| icModremove Module Remove - a module has been removed from chassis | notification | - | .1.3.6.1.4.1.7342.0.16 |
| icAuthTelnetFail Telnet Authentication Failure - Telnet user name and/or password did not
match. | notification | - | .1.3.6.1.4.1.7342.0.160 |
| icRingProtectStateChange The module has detected a Ring Protection port state change. | notification | - | .1.3.6.1.4.1.7342.0.161 |
| icPriAct Primary Link up | notification | - | .1.3.6.1.4.1.7342.0.17 |
| icPriDis Primary Link down | notification | - | .1.3.6.1.4.1.7342.0.18 |
| icSecAct Secondary Link up | notification | - | .1.3.6.1.4.1.7342.0.19 |
| icModsftreset Module Reset - the module received a reset command from the chassis
data manager | notification | - | .1.3.6.1.4.1.7342.0.2 |
| icSecDis Secondary Link down | notification | - | .1.3.6.1.4.1.7342.0.20 |
| icTelStart Telnet Session Started | notification | - | .1.3.6.1.4.1.7342.0.21 |
| icTelStop Telnet Session Stopped | notification | - | .1.3.6.1.4.1.7342.0.22 |
| icFTPStart FTP Session Started | notification | - | .1.3.6.1.4.1.7342.0.23 |
| icFTPStop FTP Session Stopped | notification | - | .1.3.6.1.4.1.7342.0.24 |
| icStnAct Secondary Link Standby Up | notification | - | .1.3.6.1.4.1.7342.0.25 |
| icStnDis Secondary Link Standby Down | notification | - | .1.3.6.1.4.1.7342.0.26 |
| icPwdExceeded Password Count Exceeded | notification | - | .1.3.6.1.4.1.7342.0.27 |
| icROMchecksum Flash checksum error | notification | - | .1.3.6.1.4.1.7342.0.28 |
| icROMFileType Flash file type incorrect | notification | - | .1.3.6.1.4.1.7342.0.29 |
| icModlinkdown Module Link Down - the module went from a link to a no link condition | notification | - | .1.3.6.1.4.1.7342.0.3 |
| icROMProgFail Flash program failure | notification | - | .1.3.6.1.4.1.7342.0.30 |
| icROMFileChecksum Flash file transmission error | notification | - | .1.3.6.1.4.1.7342.0.31 |
| icModuleFlashProgramComplete Module programming completed OK | notification | - | .1.3.6.1.4.1.7342.0.32 |
| icDyingGasp Power failure detected, system shutting down | notification | - | .1.3.6.1.4.1.7342.0.33 |
| icKeepAlive Periodic trap to let management applications know device is still
active | notification | - | .1.3.6.1.4.1.7342.0.34 |
| icVlanCfgChange Module VLAN information has been changed | notification | - | .1.3.6.1.4.1.7342.0.35 |
| icAISdetected AIS Detected | notification | - | .1.3.6.1.4.1.7342.0.36 |
| icPRBSdetected PRBS Detected | notification | - | .1.3.6.1.4.1.7342.0.37 |
| icChassisMastershipAcquired Management module has acquired mastership of the backplane | notification | - | .1.3.6.1.4.1.7342.0.39 |
| icModlinkup Module Link Up - the module went from no link to a link condition | notification | - | .1.3.6.1.4.1.7342.0.4 |
| icSecureModeChange Module has switched secure mode
trapcode 0: secure -> normal (NMM master)
trapcode 1: normal -> secure (NMM master)
trapcode 2: secure -> normal (secure proxy)
trapcode 3: normal … | notification | - | .1.3.6.1.4.1.7342.0.40 |
| icChassisMastershipRelinquished Management module has relinquished mastership of the backplane | notification | - | .1.3.6.1.4.1.7342.0.41 |
| icSFPDeviceInserted A SFP Device Inserted | notification | - | .1.3.6.1.4.1.7342.0.42 |
| icSFPDeviceRemoved A SFP Device Removed | notification | - | .1.3.6.1.4.1.7342.0.43 |
| icAHEventNotificationGenerated AH Link Event has been generated | notification | - | .1.3.6.1.4.1.7342.0.44 |
| icAHEventNotificationReceived AH Link Event has been received | notification | - | .1.3.6.1.4.1.7342.0.45 |
| icContactStatusChange Contact closure status change detected | notification | - | .1.3.6.1.4.1.7342.0.46 |
| icAHLinkFaultReceived A link fault has been received over AH connection | notification | - | .1.3.6.1.4.1.7342.0.47 |
| icAHCriticalEventGenerated A critical event has been generated | notification | - | .1.3.6.1.4.1.7342.0.48 |
| icAHCriticalEventReceived A critical event has been received | notification | - | .1.3.6.1.4.1.7342.0.49 |
| icModdipsw Module Dip Switch Change - the dip switches on the module were changed | notification | - | .1.3.6.1.4.1.7342.0.5 |
| icAHRemoteDyingGasp Power failure detected from remote partner, system shutting down | notification | - | .1.3.6.1.4.1.7342.0.50 |
| icResource Generated when an internal resource is fully allocated. Specific
resource is defined by the Trap code. | notification | - | .1.3.6.1.4.1.7342.0.51 |
| icLoopbackReplyReceived Generated when the T1/E1, T3/E3 remote module responds to a loopback
request | notification | - | .1.3.6.1.4.1.7342.0.52 |
| icLoopbackReplyLost Generated when the T1/E1, T3/E3 remote module stops sending a loopback
reply | notification | - | .1.3.6.1.4.1.7342.0.53 |
| icCfmFaultAlarm Generated when an 802.1ag MEP has a persistent defect condition,
trapcode has the port number | notification | - | .1.3.6.1.4.1.7342.0.54 |
| icCfmLoopBackComplete Generated when an 802.1ag loopback command has completed. | notification | - | .1.3.6.1.4.1.7342.0.55 |
| icCfmLinkTraceComplete Generated when an 802.1ag Link Trace command has completed. | notification | - | .1.3.6.1.4.1.7342.0.56 |
| icCfmMepUp Generated when an 802.1ag MEP is discovered, service is restored, or
status of report port changes. | notification | - | .1.3.6.1.4.1.7342.0.57 |
| icCfmMepDown Generated when an 802.1ag MEP timeout occurs. | notification | - | .1.3.6.1.4.1.7342.0.58 |
| icCfmMepCrossConnect Generated when an 802.1ag service ID does not match the VLAN or is at
a lower MD level. | notification | - | .1.3.6.1.4.1.7342.0.59 |
| icModsoftcfg Module Configuration Change - the module configuration was changed by
external software and the hardware configuration may no longer
reflect its true state | notification | - | .1.3.6.1.4.1.7342.0.6 |
| icCfmLoop Generated when an 802.1ag MEP receives its own CCM or MEPID. | notification | - | .1.3.6.1.4.1.7342.0.60 |
| icCfmConfigError Generated when an 802.1ag MEP receives an incorrect CCM. | notification | - | .1.3.6.1.4.1.7342.0.61 |
| icCfmAllMepsUp Generated when all 802.1ag expected MEPs are up in time. | notification | - | .1.3.6.1.4.1.7342.0.62 |
| icCfmMepUnknown Generated when an 802.1ag CCM is received from an unexpected MEP. | notification | - | .1.3.6.1.4.1.7342.0.64 |
| icModovertemp Module Over Temperature - for modules with temperature sensing
capabilities this trap indicates the temperature is over the acceptable
limits for the module | notification | - | .1.3.6.1.4.1.7342.0.7 |
| icSfpTxLow Generated when the measured Tx power is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.73 |
| icSfpTxHigh Generated when the measured Tx power is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.74 |
| icSfpBiasLow Generated when the measured bias voltage is less than the low
threshold. | notification | - | .1.3.6.1.4.1.7342.0.75 |
| icSfpBiasHigh Generated when the measured bias voltage is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.76 |
| icSfpVcc3Low Generated when the measured voltage is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.77 |
| icSfpVcc3High Generated when the measured voltage is greater than the high threshold. | notification | - | .1.3.6.1.4.1.7342.0.78 |
| icSfpTempLow Generated when the measured temperature is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.79 |
| icModvoltrnge Module Voltage Range - for modules with voltage sensing capabilities
this trap indicates the voltage is outside of the acceptable limits
defined for the voltage being sensed | notification | - | .1.3.6.1.4.1.7342.0.8 |
| icSfpTempHigh Generated when the measured temperature is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.80 |
| icSfpAux2Low Generated when the measured Aux 2 value is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.81 |
| icSfpAux2High Generated when the measured Aux 2 value is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.82 |
| icSfpAux1Low Generated when the measured Aux 1 value is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.83 |
| icSfpAux1High Generated when the measured Aux 1 value is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.84 |
| icSfpRxLow Generated when the measured Rx power is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.85 |
| icSfpRxHigh Generated when the measured Rx power is greater than the high
threshold. | notification | - | .1.3.6.1.4.1.7342.0.86 |
| icSfpVcc2Low Generated when the measured voltage is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.87 |
| icSfpVcc2High Generated when the measured voltage is greater than the high threshold. | notification | - | .1.3.6.1.4.1.7342.0.88 |
| icSfpVcc5Low Generated when the measured voltage is less than the low threshold. | notification | - | .1.3.6.1.4.1.7342.0.89 |
| icModpwrremv Module Power Removed - A power supply's cord is no longer supplying
power to it and the supply is no longer generating voltage. (For
chassis with multiple supplies) | notification | - | .1.3.6.1.4.1.7342.0.9 |
| icSfpVcc5High Generated when the measured voltage is greater than the high threshold. | notification | - | .1.3.6.1.4.1.7342.0.90 |
| icLineChange OST equivalent of the DS1 MIB dsx1LineStatusChange. | notification | - | .1.3.6.1.4.1.7342.0.91 |
| icConfigChange Configuration change has been committed to flash. | notification | - | .1.3.6.1.4.1.7342.0.92 |
| icLoopbackActivation Loopback Activation - loopback mode entered on remote device. | notification | - | .1.3.6.1.4.1.7342.0.93 |
| icLoopbackDeactivation Loopback Deactivation - normal mode entered on remote device. | notification | - | .1.3.6.1.4.1.7342.0.94 |
| icTimingError Timing Error or Clock Slip. | notification | - | .1.3.6.1.4.1.7342.0.95 |
| icFramingOverrun Data Framing Overrun. | notification | - | .1.3.6.1.4.1.7342.0.96 |
| icDataUnderrun Data Framing Under run. | notification | - | .1.3.6.1.4.1.7342.0.97 |
| icRemoteFound Remote Unit Found. | notification | - | .1.3.6.1.4.1.7342.0.98 |
| icHardwareFault Module Hardware Failure | notification | - | .1.3.6.1.4.1.7342.0.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| trapchassis Chassis number of module that generated the trap | scalar | Integer32 | .1.3.6.1.4.1.7342.1.2 |
| trapslot Slot number of module that generated the trap | scalar | Integer32 | .1.3.6.1.4.1.7342.1.3 |
| trapcode Type of extended trap | scalar | Integer32 | .1.3.6.1.4.1.7342.1.4 |
| trapip IPv4 address of the trap source. If an IPv6 address is configured the
return value is either 0.0.0.0 or 255.255.255.255. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.1.5 |
| trapmoduledescription The module description | scalar | OctetString | .1.3.6.1.4.1.7342.1.7 |
| trapmodetype The module Mode Type | scalar | OMNITRON-TC-MIBOstModeType | .1.3.6.1.4.1.7342.1.9 |
| eventSrcIp Originating IPv4 address of the cause of the event. This object indicates
the IP address of the cause of the error condition. For instance this
object indicates the IP address of … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.6.15 |
| eventAclNumber ACL index number used to indicate which ACL was violated. A value of 0
indicates the default value was violated. A non-zero value indicates
the specific ostAclCfgIndex that caused… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.6.16 |
| eventSrcIpString Originating IPv6 address of the cause of the event. This
object indicates the IP address of the cause of the error condition.
For instance this object indicates the IP address of… | scalar | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.6.19 |
| trapIpString IPv6 or IPv4 address of the trap source. If no address is configured the
value returned is 0.0.0.0 or 255.255.255.255. | scalar | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.1.10 |