nhdpInitialPending
NHDP-MIB ·
.1.3.6.1.2.1.213.1.1.1.1.12
Object
nhdpInitialPending corresponds to
INITIAL_PENDING of NHDP. If the value of this object
is 'true(1)', then a newly identified link is considered
pending and is not usable until the link quality
has reached or exceeded the nhdpHystAcceptQuality
threshold.
Guidance for setting this object may be found
in Section 5 of the NHDP specification (RFC 6130),
which indicates that:
o If nhdpInitialQuality >= nhdpHystAcceptQuality,
then nhdpInitialPending := false(2).
o If nhdpInitialQuality < nhdpHystRejectQuality,
then nhdpInitialPending := true(1).
Context
- MIB
- NHDP-MIB
- OID
.1.3.6.1.2.1.213.1.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nhdpInterfaceEntry
- Table
- nhdpInterfaceTable
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nhdpIfIndex This value MUST correspond to an ifIndex referring
to a valid entry in the Interfaces Table. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.213.1.1.1.1.1 |
| nhdpHystRejectQuality nhdpHystRejectQuality corresponds to
HYST_REJECT of NHDP and represents the
link quality threshold below which a
link becomes unusable, if it was not
already so.
Gu… | column | FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.213.1.1.1.1.10 |
| nhdpInitialQuality nhdpInitialQuality corresponds to
INITIAL_QUALITY of NHDP and represents the
initial quality of a newly identified link.
Guidance for setting this object may be fou… | column | FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.213.1.1.1.1.11 |
| nhdpHpMaxJitter nhdpHpMaxJitter corresponds to
HP_MAXJITTER of NHDP and represents the
value of MAXJITTER used in RFC 5148 for
periodically generated HELLO messages on
this MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.13 |
| nhdpHtMaxJitter nhdpHtMaxJitter corresponds to
HT_MAXJITTER of NHDP and represents the
value of MAXJITTER used in RFC 5148 for
externally triggered HELLO messages on this
MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.14 |
| nhdpIfRowStatus This object permits management of the table
by facilitating actions such as row creation,
construction, and destruction. The value of
this object has no effect on whether other
o… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.213.1.1.1.1.15 |
| nhdpIfName The textual name of the interface. The value of this
object SHOULD be the name of the interface as assigned by
the local device. This can be a text-name, such as 'le0'
or a simp… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.213.1.1.1.1.2 |
| nhdpIfStatus nhdpIfStatus indicates whether this interface is
currently running NHDP. A value of 'true(1)' indicates
that NHDP is running on this interface.
A value of 'false(2)' indicates th… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.213.1.1.1.1.3 |
| nhdpHelloInterval nhdpHelloInterval corresponds to
HELLO_INTERVAL of NHDP and represents the
maximum time between the transmission of two
successive HELLO messages on this MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.4 |
| nhdpHelloMinInterval nhdpHelloMinInterval corresponds to
HELLO_MIN_INTERVAL of NHDP and represents
the minimum interval between transmission
of two successive HELLO messages on this
MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.5 |
| nhdpRefreshInterval nhdpRefreshInterval corresponds to
REFRESH_INTERVAL of NHDP and represents the
maximum interval between advertisements of
each 1-hop neighbor network address and its
status. Each… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.6 |
| nhdpLHoldTime nhdpLHoldTime corresponds to
L_HOLD_TIME of NHDP and represents the period
of advertisement, on this MANET interface, of
former 1-hop neighbor network addresses as lost
in HELLO m… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.7 |
| nhdpHHoldTime nhdpHHoldTime corresponds to
H_HOLD_TIME of NHDP and is used as the value
in the VALIDITY_TIME Message TLV included in all
HELLO messages on this MANET interface. It is then
used… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.8 |
| nhdpHystAcceptQuality nhdpHystAcceptQuality corresponds to
HYST_ACCEPT of NHDP and represents the link
quality threshold at or above which a link becomes
usable, if it was not already so.
… | column | FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.213.1.1.1.1.9 |