nhdpIfStatus
NHDP-MIB ·
.1.3.6.1.2.1.213.1.1.1.1.3
Object
nhdpIfStatus indicates whether this interface is currently running NHDP. A value of 'true(1)' indicates that NHDP is running on this interface. A value of 'false(2)' indicates that NHDP is not currently running on this interface. This corresponds to the I_manet parameter in the Local Interface Set of NHDP.
Context
- MIB
- NHDP-MIB
- OID
.1.3.6.1.2.1.213.1.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nhdpInterfaceEntry
- Table
- nhdpInterfaceTable
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nhdpIfIndex This value MUST correspond to an ifIndex referring
to a valid entry in the Interfaces Table. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.213.1.1.1.1.1 |
| nhdpHystRejectQuality nhdpHystRejectQuality corresponds to
HYST_REJECT of NHDP and represents the
link quality threshold below which a
link becomes unusable, if it was not
already so.
Gu… | column | FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.213.1.1.1.1.10 |
| nhdpInitialQuality nhdpInitialQuality corresponds to
INITIAL_QUALITY of NHDP and represents the
initial quality of a newly identified link.
Guidance for setting this object may be fou… | column | FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.213.1.1.1.1.11 |
| nhdpInitialPending nhdpInitialPending corresponds to
INITIAL_PENDING of NHDP. If the value of this object
is 'true(1)', then a newly identified link is considered
pending and is not usable until th… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.213.1.1.1.1.12 |
| nhdpHpMaxJitter nhdpHpMaxJitter corresponds to
HP_MAXJITTER of NHDP and represents the
value of MAXJITTER used in RFC 5148 for
periodically generated HELLO messages on
this MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.13 |
| nhdpHtMaxJitter nhdpHtMaxJitter corresponds to
HT_MAXJITTER of NHDP and represents the
value of MAXJITTER used in RFC 5148 for
externally triggered HELLO messages on this
MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.14 |
| nhdpIfRowStatus This object permits management of the table
by facilitating actions such as row creation,
construction, and destruction. The value of
this object has no effect on whether other
o… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.213.1.1.1.1.15 |
| nhdpIfName The textual name of the interface. The value of this
object SHOULD be the name of the interface as assigned by
the local device. This can be a text-name, such as 'le0'
or a simp… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.213.1.1.1.1.2 |
| nhdpHelloInterval nhdpHelloInterval corresponds to
HELLO_INTERVAL of NHDP and represents the
maximum time between the transmission of two
successive HELLO messages on this MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.4 |
| nhdpHelloMinInterval nhdpHelloMinInterval corresponds to
HELLO_MIN_INTERVAL of NHDP and represents
the minimum interval between transmission
of two successive HELLO messages on this
MANET interface.
… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.5 |
| nhdpRefreshInterval nhdpRefreshInterval corresponds to
REFRESH_INTERVAL of NHDP and represents the
maximum interval between advertisements of
each 1-hop neighbor network address and its
status. Each… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.6 |
| nhdpLHoldTime nhdpLHoldTime corresponds to
L_HOLD_TIME of NHDP and represents the period
of advertisement, on this MANET interface, of
former 1-hop neighbor network addresses as lost
in HELLO m… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.7 |
| nhdpHHoldTime nhdpHHoldTime corresponds to
H_HOLD_TIME of NHDP and is used as the value
in the VALIDITY_TIME Message TLV included in all
HELLO messages on this MANET interface. It is then
used… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.213.1.1.1.1.8 |
| nhdpHystAcceptQuality nhdpHystAcceptQuality corresponds to
HYST_ACCEPT of NHDP and represents the link
quality threshold at or above which a link becomes
usable, if it was not already so.
… | column | FLOAT-TC-MIBFloat32TC | .1.3.6.1.2.1.213.1.1.1.1.9 |