r2SignalingVariantsOverrideDefault

MX-R2-MIB · .0.1875.1.100.200.1.300
MIB view Table view

Object

column r/w MX-TCMxEnableState 
Override Default
              
Overrides the default settings of R2 Signaling parameters for
the CountrySelection and InterfaceName.
              
  * Disable: The interface uses the default country
    configuration. The configuration set in the current row
    has no effect on the default country configuration. Refer
    to the technical documentation to get the default country
    variants configuration.
  * Enable: The interface uses the specific country
    configuration as defined in the current row. To retrieve
    the default configuration associated with the current
    country, the parameter reset MUST be enabled.

Context

MIB
MX-R2-MIB
OID
.0.1875.1.100.200.1.300
Type
column
Access
readwrite
Status
current
Parent
r2SignalingVariantsEntry
Table
r2SignalingVariantsTable
Siblings
12

Syntax

MX-TCMxEnableState
Source
MX-TCMxEnableState
Base type
Enumeration

Values & Constraints

Type Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
r2SignalingVariantsInterfaceName
Interface Name Identifies the interface.
columnOctetString.0.1875.1.100.200.1.100
r2SignalingVariantsResetSpecific
Reset Specific Resets specific settings of R2 Signaling parameters with the default country settings. This command is used to retrieve the default country configura…
columnEnumeration.0.1875.1.100.200.1.1000
r2SignalingVariantsBitsCD
CD Bits Settings of the C and D bits when the device transmits line signals. C and D bits of received line signals are ignored by the device.
columnInteger32.0.1875.1.100.200.1.400
r2SignalingVariantsDnisLength
DNIS Length This parameter specifies the expected length of the DNIS. DNIS (Dialed Number Identification Service) is the called party or the destination number. If …
columnUnsigned32.0.1875.1.100.200.1.500
r2SignalingVariantsAniLength
ANI Length Defines the length of ANI (Automatic Number Identification) to be requested or sent. If a variable length ANI is used, the tone set in the R2ToneVariants…
columnUnsigned32.0.1875.1.100.200.1.600
r2SignalingVariantsAniRequestEnable
ANI Request Enable Defines whether or not ANI should be requested. ANI (Automatic Number Identification) is the calling party number. When ANI is requested, the cal…
columnMX-TCMxEnableState.0.1875.1.100.200.1.700
r2SignalingVariantsSendAniRequestAfterDnisDigits
Send ANI Request After DNIS Digits When the AniRequestEnable parameter is Enabled, this parameter defines the number of DNIS (Dialed Number Identification Service) …
columnUnsigned32.0.1875.1.100.200.1.800
r2SignalingVariantsCollectCallBlocked
Collect Call Blocked Defines if the Collect Call Blockage Option is used. Two methods actually exist to do Collect Call Blockage. The first method re…
columnMX-TCMxEnableState.0.1875.1.100.200.1.900
r2SignalingVariantsAniCategory
Category Group II Signal Specifies the group II forward signal to be sent on receiving a calling party category request. This tone indicates the category of the cal…
columnEnumeration.0.1875.1.100.200.1.920
r2SignalingVariantsLineFreeCategory
Line Free Group B signal Specifies the group B backward signal to be sent by the incoming R2 register to indicate line free condition of the destination party. …
columnEnumeration.0.1875.1.100.200.1.930
r2SignalingVariantsAniRestrictedEnable
ANI Restricted Enable This parameter specifies the behaviour of the unit following the reception of a reject request after sending the Send next digit (ANI) request…
columnMX-TCMxEnableState.0.1875.1.100.200.1.950
r2SignalingVariantsIncomingDeclineMethod
Incoming Decline Method Sets how to cancel a call attempt from R2 if the called party rejects the call when in Seizure Acknowledged state (waiting for answer). …
columnEnumeration.0.1875.1.100.200.1.970