r2SignalingVariantsAniCategory

MX-R2-MIB · .0.1875.1.100.200.1.920

Object

column r/w Enumeration

Category Group II Signal
              
Specifies the group II forward signal to be sent on receiving
a calling party category request. This tone indicates the
category of the calling party.
              
  * NatSubscriberNoPrio: Call is set up from a national
    subscriber's line and is not a priority.
  * NatSubscriberPrio: Call is set up from a national
    subscriber's line to which priority treatment of calls
    has been granted.
  * NatMaintenance: Call comes from a national maintenance
    equipment.
  * NatSpare: Spare.
  * NatOperator: Call is set up from a national operator's
    position.
  * NatData: Call will be used for national data
    transmission.
  * IntSubscriberNoPrio: Call is set up from an international
    subscriber's line and is not a priority.
  * IntData: Call will be used for international data
    transmission.
  * IntSubscriberPrio: Call is set up from an international
    subscriber's line to which priority treatment of calls
    has been granted.
  * IntOperator: Call is set up from an international
    operator's position.
  * CollectCall: Call is set up for Call Collect.

Context

MIB: MX-R2-MIB
OID: .0.1875.1.100.200.1.920
Type: column
Access: readwrite
Status: current
Parent: r2SignalingVariantsEntry
Table: r2SignalingVariantsTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`100`	natSubscriberNoPrio
`200`	natSubscriberPrio
`300`	natMaintenance
`400`	natSpare
`500`	natOperator
`600`	natData
`700`	intSubscriberNoPrio
`800`	intData
`900`	intSubscriberPrio
`1000`	intOperator
`1100`	collectCall

Related Objects

Sibling Objects

Object	Type	Syntax	OID
r2SignalingVariantsInterfaceName Interface Name Identifies the interface.	column	OctetString	`.0.1875.1.100.200.1.100`
r2SignalingVariantsResetSpecific Reset Specific Resets specific settings of R2 Signaling parameters with the default country settings. This command is used to retrieve the default country configura…	column	Enumeration	`.0.1875.1.100.200.1.1000`
r2SignalingVariantsOverrideDefault Override Default Overrides the default settings of R2 Signaling parameters for the CountrySelection and InterfaceName. * Disable: The interface use…	column	MX-TCMxEnableState	`.0.1875.1.100.200.1.300`
r2SignalingVariantsBitsCD CD Bits Settings of the C and D bits when the device transmits line signals. C and D bits of received line signals are ignored by the device.	column	Integer32	`.0.1875.1.100.200.1.400`
r2SignalingVariantsDnisLength DNIS Length This parameter specifies the expected length of the DNIS. DNIS (Dialed Number Identification Service) is the called party or the destination number. If …	column	Unsigned32	`.0.1875.1.100.200.1.500`
r2SignalingVariantsAniLength ANI Length Defines the length of ANI (Automatic Number Identification) to be requested or sent. If a variable length ANI is used, the tone set in the R2ToneVariants…	column	Unsigned32	`.0.1875.1.100.200.1.600`
r2SignalingVariantsAniRequestEnable ANI Request Enable Defines whether or not ANI should be requested. ANI (Automatic Number Identification) is the calling party number. When ANI is requested, the cal…	column	MX-TCMxEnableState	`.0.1875.1.100.200.1.700`
r2SignalingVariantsSendAniRequestAfterDnisDigits Send ANI Request After DNIS Digits When the AniRequestEnable parameter is Enabled, this parameter defines the number of DNIS (Dialed Number Identification Service) …	column	Unsigned32	`.0.1875.1.100.200.1.800`
r2SignalingVariantsCollectCallBlocked Collect Call Blocked Defines if the Collect Call Blockage Option is used. Two methods actually exist to do Collect Call Blockage. The first method re…	column	MX-TCMxEnableState	`.0.1875.1.100.200.1.900`
r2SignalingVariantsLineFreeCategory Line Free Group B signal Specifies the group B backward signal to be sent by the incoming R2 register to indicate line free condition of the destination party. …	column	Enumeration	`.0.1875.1.100.200.1.930`
r2SignalingVariantsAniRestrictedEnable ANI Restricted Enable This parameter specifies the behaviour of the unit following the reception of a reject request after sending the Send next digit (ANI) request…	column	MX-TCMxEnableState	`.0.1875.1.100.200.1.950`
r2SignalingVariantsIncomingDeclineMethod Incoming Decline Method Sets how to cancel a call attempt from R2 if the called party rejects the call when in Seizure Acknowledged state (waiting for answer). …	column	Enumeration	`.0.1875.1.100.200.1.970`