wdmCtrlChannelStatus

LUM-WDM-MIB · .1.3.6.1.4.1.8708.2.4.2.8.1.1.16
MIB view Table view

Object

column Enumeration 
The regulation status of the channel.
              
initial    - No regulation has been performed yet.
              
searching  - The system is trying to detect the channel.
              
regulating - The system is regulating the output
                power of the channel to the wanted
                level.
              
ok         - The output power of the channel is at the
                wanted level.
              
notFound   - Channel could not be detected in monitor.
              
error      - Regulation of channel output power failed.
              
waiting    - Channel is in queue for regulation startup
             and will be started when ongoing
             regulations and prior elements in the
             startup queue have been processed.

Context

MIB
LUM-WDM-MIB
OID
.1.3.6.1.4.1.8708.2.4.2.8.1.1.16
Type
column
Access
readonly
Status
current
Parent
wdmCtrlChannelEntry
Table
wdmCtrlChannelTable
Siblings
27

Syntax

Enumeration

Values & Constraints

Enumerated Values
1initial
2searching
3regulating
4ok
5notFound
6error
7waiting

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wdmCtrlChannelIndex
An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.1
wdmCtrlChannelCurrentOutputPower
The actual output power.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.4.2.8.1.1.10
wdmCtrlChannelCurrentAttenuation
The current attenuation.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.11
wdmCtrlChannelForceRegulationCommand
Starts a regulation manually
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.4.2.8.1.1.12
wdmCtrlChannelOuputPowerControlFailure
Alarm raised when the wanted output power can not be obtained. That is a) The wanted power has not been obtained after the maximum number of consequent control cycl…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.13
wdmCtrlChannelCurrentPowerOutOfRange
Alarm raised when the current output power is outside the 'regulation range' for the group. At this point, no regulation will be performed on the channel. The opera…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.14
wdmCtrlChannelAttenuationOutOfRange
Alarm raised when the attenuation is at the maximum or minimum values for the controlled device and the wantedOutputPower cannot be obtained. At this point, no regu…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.15
wdmCtrlChannelStartupChannel
Initiates a safe startup procedure for the channel when set to 'start'. If the administrative status of the channel is 'down' or the channel is not detected by the …
columnEnumeration.1.3.6.1.4.1.8708.2.4.2.8.1.1.17
wdmCtrlChannelMonitorIndex
Shows the index of the connected monitor interface.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.18
wdmCtrlChannelStartupCommand
Initiates a safe startup sequence for the channel. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to…
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.4.2.8.1.1.19
wdmCtrlChannelName
The management name of the channel, for example 'ch:1:2:1:959' (ch:[subrack]:[slot]:[port]:[channel]).
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.4.2.8.1.1.2
wdmCtrlChannelSfpMissing
An expected SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.20
wdmCtrlChannelSfpMediaMismatch
The type of the SFP used for the channel port is not the expected. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.21
wdmCtrlChannelLossOfSignal
Loss of signal at the channel port. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.22
wdmCtrlChannelDescr
User configurable label. This attribute can be written via SNMP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.4.2.8.1.1.23
wdmCtrlChannelMaxAttenuation
The max attenuation limit on channel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.24
wdmCtrlChannelMinAttenuation
The min attenuation limit on channel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.25
wdmCtrlChannelAttenControlOffset
The threshold offset to max/min attenuation on the channel. If the threshold is reached, AttenControlDegraded alarm will be raised.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.26
wdmCtrlChannelAttenControlDegraded
Alarm is raised when channel attenuation is crossing threshold to max/min attenuation. A(ctivation): Active the alarm indication. D(e-activation): In…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.27
wdmCtrlChannelNotFound
Channel not found.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.28
wdmCtrlChannelSubrack
The subrack number of the unit where the controlled channel is attenuated.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.4.2.8.1.1.3
wdmCtrlChannelSlot
The slot number of the unit where the controlled channel is attenuated.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.4.2.8.1.1.4
wdmCtrlChannelTxPort
The port number of the controlled channel in the unit where the channel is attenuated.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.4.2.8.1.1.5
wdmCtrlChannelChannel
The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz).
columnLUM-TCLambdaFrequency.1.3.6.1.4.1.8708.2.4.2.8.1.1.6
wdmCtrlChannelGroupNumber
The number of the group to which the controlled channel belongs.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.7
wdmCtrlChannelAdminStatus
The administrative state for the channel control. down - The channel control is inactive. Channel attenuation is set to its maximum value. service - …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.8
wdmCtrlChannelWantedOutputPower
The wanted output power.
columnInteger32.1.3.6.1.4.1.8708.2.4.2.8.1.1.9