wdmCtrlChannelStartupChannel

LUM-WDM-MIB · .1.3.6.1.4.1.8708.2.4.2.8.1.1.17
MIB view Table view

Object

column r/w Enumeration 
Initiates a safe startup procedure for the channel
when set to 'start'.
              
If the administrative status of the channel is
'down' or the channel is not detected by the monitor
unit, the system attempts to detect the channel as
follows:
              
1) The attenuation is set to its maximum value.
              
2) The attenuation is decreased until the channel is
detected by the monitor.
              
When the channel is detected, regulation of the
channel is started, ignoring the regulation range.
              
If the channel cannot be detected, channelStatus is
set to notFound. If regulation in fails,
channelStatus is set to error and an alarm is
raised.
              
When the startup sequence is finished, the
administrative status of the channel is set to 'up'.
              
If a regulation is ongoing when the startup
procedure is initiated, the channel is put on a
waiting queue until the ongoing regulation is
finished. The startup queue has a limited length. If
the queue is filled up with waiting channels,
further startup commands will be blocked until all
the queued channels have been started.
              
At times when it is not allowed to start the
channel, e.g. in commissioning mode or when the
queue is full, this attribute is set to 'blocked'
and cannot be set to start.
              
NOTE: The 'blocked' state is handled entirely by the
system and cannot be set or reset by the user.
              
The state of this attribute immediately returns to
'normal' when the startup procedure has been
initiated or the channel is put on the startup
queue.

Context

MIB
LUM-WDM-MIB
OID
.1.3.6.1.4.1.8708.2.4.2.8.1.1.17
Type
column
Access
readwrite
Status
current
Parent
wdmCtrlChannelEntry
Table
wdmCtrlChannelTable
Siblings
27

Syntax

Enumeration

Values & Constraints

Enumerated Values
1normal
2start
3blocked

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wdmCtrlChannelIndex
An index assigned to each entry. The index contains information about subrack, slot and port for controlled channel.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.1
wdmCtrlChannelCurrentOutputPower
The actual output power.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.4.2.8.1.1.10
wdmCtrlChannelCurrentAttenuation
The current attenuation.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.11
wdmCtrlChannelForceRegulationCommand
Starts a regulation manually
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.4.2.8.1.1.12
wdmCtrlChannelOuputPowerControlFailure
Alarm raised when the wanted output power can not be obtained. That is a) The wanted power has not been obtained after the maximum number of consequent control cycl…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.13
wdmCtrlChannelCurrentPowerOutOfRange
Alarm raised when the current output power is outside the 'regulation range' for the group. At this point, no regulation will be performed on the channel. The opera…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.14
wdmCtrlChannelAttenuationOutOfRange
Alarm raised when the attenuation is at the maximum or minimum values for the controlled device and the wantedOutputPower cannot be obtained. At this point, no regu…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.15
wdmCtrlChannelStatus
The regulation status of the channel. initial - No regulation has been performed yet. searching - The system is trying to detect the channel. …
columnEnumeration.1.3.6.1.4.1.8708.2.4.2.8.1.1.16
wdmCtrlChannelMonitorIndex
Shows the index of the connected monitor interface.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.18
wdmCtrlChannelStartupCommand
Initiates a safe startup sequence for the channel. If the administrative status of the channel is 'down' or the channel is not detected by the monitor unit, the system attempts to…
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.4.2.8.1.1.19
wdmCtrlChannelName
The management name of the channel, for example 'ch:1:2:1:959' (ch:[subrack]:[slot]:[port]:[channel]).
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.4.2.8.1.1.2
wdmCtrlChannelSfpMissing
An expected SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.20
wdmCtrlChannelSfpMediaMismatch
The type of the SFP used for the channel port is not the expected. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.21
wdmCtrlChannelLossOfSignal
Loss of signal at the channel port. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.22
wdmCtrlChannelDescr
User configurable label. This attribute can be written via SNMP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.4.2.8.1.1.23
wdmCtrlChannelMaxAttenuation
The max attenuation limit on channel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.24
wdmCtrlChannelMinAttenuation
The min attenuation limit on channel.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.25
wdmCtrlChannelAttenControlOffset
The threshold offset to max/min attenuation on the channel. If the threshold is reached, AttenControlDegraded alarm will be raised.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.26
wdmCtrlChannelAttenControlDegraded
Alarm is raised when channel attenuation is crossing threshold to max/min attenuation. A(ctivation): Active the alarm indication. D(e-activation): In…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.27
wdmCtrlChannelNotFound
Channel not found.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.28
wdmCtrlChannelSubrack
The subrack number of the unit where the controlled channel is attenuated.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.4.2.8.1.1.3
wdmCtrlChannelSlot
The slot number of the unit where the controlled channel is attenuated.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.4.2.8.1.1.4
wdmCtrlChannelTxPort
The port number of the controlled channel in the unit where the channel is attenuated.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.4.2.8.1.1.5
wdmCtrlChannelChannel
The frequency of the 'wavelength' given in hundreds of GHz (0.01 GHz).
columnLUM-TCLambdaFrequency.1.3.6.1.4.1.8708.2.4.2.8.1.1.6
wdmCtrlChannelGroupNumber
The number of the group to which the controlled channel belongs.
columnUnsigned32.1.3.6.1.4.1.8708.2.4.2.8.1.1.7
wdmCtrlChannelAdminStatus
The administrative state for the channel control. down - The channel control is inactive. Channel attenuation is set to its maximum value. service - …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.4.2.8.1.1.8
wdmCtrlChannelWantedOutputPower
The wanted output power.
columnInteger32.1.3.6.1.4.1.8708.2.4.2.8.1.1.9