syncSourceQuality

LUM-SYNC-MIB · .1.3.6.1.4.1.8708.2.16.2.3.1.1.7

Object

column Unsigned32

The quality for the sync source. The received S1-byte
is shown.
              
The integer values can be interpreted as follows:
              
SDH/SyncE (G.707/G.781):
S1  Quality Description
-----------------------
 0      0   Quality unknown (existing sync. network)
 2      2   Traceable to PRC G.811
 4      4   Traceable to Transit G.812
 8      8   Traceable to Local G.812
11     11   Derived from SETS
15     15   Do not use for Synchronization.
Other bytes are reserved.
              
SONET (GR253 CORE) - not applicable for EMXP boards:
S1  Quality Description
-----------------------
 0      2   Synchronized - Traceability Unknown
 1      1   Traceble to Stratum 1
 4      4   Transit Node Clock Traceable
 7      3   Traceble to Stratum 2
10      6   Traceble to Stratum 3
12      7   SONET Minimum Clock
13      5   Traceble to Stratum 3E
14      X   Provisonable by operator User
15      9   Do not use for Synchronization
              
The following values are also defined for interal use:
              
Value Quality Description
-------------------------
16    NSUPP   Quality Level not supported by function.
17    FAIL    Sync Source in fail state.
18    UNC     Sync source unconnected.

Context

MIB: LUM-SYNC-MIB
OID: .1.3.6.1.4.1.8708.2.16.2.3.1.1.7
Type: column
Access: readonly
Status: current
Parent: syncSourceEntry
Table: syncSourceTable
Siblings: 20

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 0-18

Related Objects

Sibling Objects

Object	Type	Syntax	OID
syncSourceIndex An arbitrary index assigned to the sync source.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.1`
syncSourceOperStatus The operational state for the sync source. notPresent - The physical resource is not available. down - The sync source is disabled. up…	column	LUM-TCBoardOrInterfaceOperStatus	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.10`
syncSourceIsSelected Shows if the sync source is selected or not. false - The sync source is not in use. true - The sync source is in use.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.11`
syncSourceAlwaysSendDoNotUse This attribute controls whether to ALWAYS send S1 = 'Do not use' on the port corresponding to this source. disabled - Send the actual S1 value of the synchronizatio…	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.12`
syncSourceStaticQuality This attribute is used to assign a static G.781 Option 1 Quality level to the source for use in the Synch Source Selection process. Values are interpreted as below: …	column	Unsigned32	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.13`
syncSourceFilterState The state of the source in the synchronization selection algorithm it is included in. undefined - The source is not included in any selection algorithm …	column	LUM-TCSyncSourceState	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.14`
syncSourceMode The operating mode of the sync source. disabled - The source is disabled from the sync selection process and will not send or terminate SSM message…	column	LUM-TCSyncSourceMode	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.15`
syncSourceClearWaitToRestore Clears an active Wait To Restore timer for the sync source.	column	LUM-TCCommandString	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.16`
syncSourceClockWanderExceeded The sync source has drifted at a rate that exceeds the limit.	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.17`
syncSourceNonSyncEClock Sync source not SyncE compliant.	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.18`
syncSourceIfNo The physical interface number of the actual multi-connector port.	column	LUM-TCPortNumber	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.19`
syncSourceName The name of the sync source.	column	LUM-TCMgmtNameString	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.2`
syncSourceUpPortId Internal port reference for traffic unit.	column	Integer32	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.20`
syncSourceLocalId Id for index calculation.	column	Integer32	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.21`
syncSourceId A unique number of the source within its group.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.3`
syncSourceRxPort The port number for the Rx-side of the interface where the signal is retrieved. 0 if the sync source is a local oscillator.	column	LUM-TCPortNumber	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.4`
syncSourceTxPort The port number for the Tx-side of the interface where the signal is retrieved. 0 if the sync source is a local oscillator.	column	LUM-TCPortNumber	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.5`
syncSourceType The type of sync source. oscillator - The sync source is a local oscillator. signal - The sync source is a signal. external - External…	column	Enumeration	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.6`
syncSourcePriority The sync source priority. Used to prioritize among sync source with the same quality. 1 is the best, 16 is the worst.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.8`
syncSourceAdminStatus Administrative state for the sync source. down - The sync source is disabled. up - The sync source is enabled and can be used for syncing.	column	LUM-TCAdminStatus	`.1.3.6.1.4.1.8708.2.16.2.3.1.1.9`