syncSourceClearWaitToRestore
LUM-SYNC-MIB ·
.1.3.6.1.4.1.8708.2.16.2.3.1.1.16
Object
column
LUM-TCCommandString
Clears an active Wait To Restore timer for the sync source.
Context
- MIB
- LUM-SYNC-MIB
- OID
.1.3.6.1.4.1.8708.2.16.2.3.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- syncSourceEntry
- Table
- syncSourceTable
- Siblings
- 20
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| syncSourceIndex An arbitrary index assigned to the sync source. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.1 |
| syncSourceOperStatus The operational state for the sync source.
notPresent - The physical resource is not
available.
down - The sync source is disabled.
up… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.16.2.3.1.1.10 |
| syncSourceIsSelected Shows if the sync source is selected or not.
false - The sync source is not in use.
true - The sync source is in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.16.2.3.1.1.11 |
| syncSourceAlwaysSendDoNotUse This attribute controls whether to ALWAYS
send S1 = 'Do not use' on the port
corresponding to this source.
disabled - Send the actual S1 value of the
synchronizatio… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.3.1.1.12 |
| syncSourceStaticQuality This attribute is used to assign a static G.781 Option 1
Quality level to the source for use in the Synch Source
Selection process. Values are interpreted as below:
… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.13 |
| syncSourceFilterState The state of the source in the synchronization selection
algorithm it is included in.
undefined - The source is not included in any selection
algorithm … | column | LUM-TCSyncSourceState | .1.3.6.1.4.1.8708.2.16.2.3.1.1.14 |
| syncSourceMode The operating mode of the sync source.
disabled - The source is disabled from the sync selection process
and will not send or terminate SSM message… | column | LUM-TCSyncSourceMode | .1.3.6.1.4.1.8708.2.16.2.3.1.1.15 |
| syncSourceClockWanderExceeded The sync source has drifted at a rate that exceeds the limit. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.3.1.1.17 |
| syncSourceNonSyncEClock Sync source not SyncE compliant. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.16.2.3.1.1.18 |
| syncSourceIfNo The physical interface number of the actual multi-connector port. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.16.2.3.1.1.19 |
| syncSourceName The name of the sync source. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.16.2.3.1.1.2 |
| syncSourceUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.20 |
| syncSourceLocalId Id for index calculation. | column | Integer32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.21 |
| syncSourceId A unique number of the source within its group. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.3 |
| syncSourceRxPort The port number for the Rx-side of the interface
where the signal is retrieved.
0 if the sync source is a local oscillator. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.16.2.3.1.1.4 |
| syncSourceTxPort The port number for the Tx-side of the interface
where the signal is retrieved.
0 if the sync source is a local oscillator. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.16.2.3.1.1.5 |
| syncSourceType The type of sync source.
oscillator - The sync source is a local
oscillator.
signal - The sync source is a signal.
external - External… | column | Enumeration | .1.3.6.1.4.1.8708.2.16.2.3.1.1.6 |
| syncSourceQuality The quality for the sync source. The received S1-byte
is shown.
The integer values can be interpreted as follows:
SDH/SyncE (G.707/G.781):
S1 Qualit… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.7 |
| syncSourcePriority The sync source priority.
Used to prioritize among sync source with the
same quality.
1 is the best, 16 is the worst. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.16.2.3.1.1.8 |
| syncSourceAdminStatus Administrative state for the sync source.
down - The sync source is disabled.
up - The sync source is enabled and can be
used for syncing. | column | LUM-TCAdminStatus | .1.3.6.1.4.1.8708.2.16.2.3.1.1.9 |