syncSourcePriority

LUM-SYNC-MIB · .1.3.6.1.4.1.8708.2.16.2.3.1.1.8
MIB view Table view

Object

column r/w Unsigned32 
The sync source priority.
Used to prioritize among sync source with the
same quality.
              
1 is the best, 16 is the worst.

Context

MIB
LUM-SYNC-MIB
OID
.1.3.6.1.4.1.8708.2.16.2.3.1.1.8
Type
column
Access
readwrite
Status
current
Parent
syncSourceEntry
Table
syncSourceTable
Siblings
20

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 1-16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
syncSourceIndex
An arbitrary index assigned to the sync source.
columnUnsigned32.1.3.6.1.4.1.8708.2.16.2.3.1.1.1
syncSourceOperStatus
The operational state for the sync source. notPresent - The physical resource is not available. down - The sync source is disabled. up…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.16.2.3.1.1.10
syncSourceIsSelected
Shows if the sync source is selected or not. false - The sync source is not in use. true - The sync source is in use.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.8708.2.16.2.3.1.1.11
syncSourceAlwaysSendDoNotUse
This attribute controls whether to ALWAYS send S1 = 'Do not use' on the port corresponding to this source. disabled - Send the actual S1 value of the synchronizatio…
columnEnumeration.1.3.6.1.4.1.8708.2.16.2.3.1.1.12
syncSourceStaticQuality
This attribute is used to assign a static G.781 Option 1 Quality level to the source for use in the Synch Source Selection process. Values are interpreted as below: …
columnUnsigned32.1.3.6.1.4.1.8708.2.16.2.3.1.1.13
syncSourceFilterState
The state of the source in the synchronization selection algorithm it is included in. undefined - The source is not included in any selection algorithm …
columnLUM-TCSyncSourceState.1.3.6.1.4.1.8708.2.16.2.3.1.1.14
syncSourceMode
The operating mode of the sync source. disabled - The source is disabled from the sync selection process and will not send or terminate SSM message…
columnLUM-TCSyncSourceMode.1.3.6.1.4.1.8708.2.16.2.3.1.1.15
syncSourceClearWaitToRestore
Clears an active Wait To Restore timer for the sync source.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.16.2.3.1.1.16
syncSourceClockWanderExceeded
The sync source has drifted at a rate that exceeds the limit.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.16.2.3.1.1.17
syncSourceNonSyncEClock
Sync source not SyncE compliant.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.16.2.3.1.1.18
syncSourceIfNo
The physical interface number of the actual multi-connector port.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.16.2.3.1.1.19
syncSourceName
The name of the sync source.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.16.2.3.1.1.2
syncSourceUpPortId
Internal port reference for traffic unit.
columnInteger32.1.3.6.1.4.1.8708.2.16.2.3.1.1.20
syncSourceLocalId
Id for index calculation.
columnInteger32.1.3.6.1.4.1.8708.2.16.2.3.1.1.21
syncSourceId
A unique number of the source within its group.
columnUnsigned32.1.3.6.1.4.1.8708.2.16.2.3.1.1.3
syncSourceRxPort
The port number for the Rx-side of the interface where the signal is retrieved. 0 if the sync source is a local oscillator.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.16.2.3.1.1.4
syncSourceTxPort
The port number for the Tx-side of the interface where the signal is retrieved. 0 if the sync source is a local oscillator.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.16.2.3.1.1.5
syncSourceType
The type of sync source. oscillator - The sync source is a local oscillator. signal - The sync source is a signal. external - External…
columnEnumeration.1.3.6.1.4.1.8708.2.16.2.3.1.1.6
syncSourceQuality
The quality for the sync source. The received S1-byte is shown. The integer values can be interpreted as follows: SDH/SyncE (G.707/G.781): S1 Qualit…
columnUnsigned32.1.3.6.1.4.1.8708.2.16.2.3.1.1.7
syncSourceAdminStatus
Administrative state for the sync source. down - The sync source is disabled. up - The sync source is enabled and can be used for syncing.
columnLUM-TCAdminStatus.1.3.6.1.4.1.8708.2.16.2.3.1.1.9