juniSystemBootConfigFile
Juniper-System-MIB ·
.1.3.6.1.4.1.4874.2.2.2.1.1.14
Object
scalar
r/w
OctetString
The system-wide boot configuration file name. This object and the juniSystemBootConfigControl object set to file(0) or fileOnce(1) must be specified together in the same set request PDU. If juniSystemBootConfigControl is file(0), only file names with extension '.cnf' are allowed. If juniSystemBootConfigControl is fileOnce(1), only file names with extensions '.cnf' or '.scr' are allowed. On a set operation, if the extension is not appropriate or there is no file found with the name specified, then an error is returned. If juniSystemBootConfigControl is not set to file(0) or fileOnce(1) then a get operation for this object will return a zero-length string.
Context
- MIB
- Juniper-System-MIB
- OID
.1.3.6.1.4.1.4874.2.2.2.1.1.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- juniSystemGeneral
- Siblings
- 27
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniSystemSwVersion Version identification of currently executing system-wide operational
software. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.2.1.1.1 |
| juniSystemBootAutoRevertControl The system boot auto-revert control is used to determine when the boot
logic should choose backup mode based of the reboot history:
default - Use the default auto-revert tol… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.1.10 |
| juniSystemBootAutoRevertCountTolerance The auto-revert reboot count tolerance, used in conjunction with the
value of juniSystemBootAutoRevertTimeTolerance when
juniSystemBootAutoRevertControl is set to set(2) in the sa… | scalar | Unsigned32 | .1.3.6.1.4.1.4874.2.2.2.1.1.11 |
| juniSystemBootAutoRevertTimeTolerance The auto-revert reboot time tolerance, used in conjunction with the
value of juniSystemBootAutoRevertCountTolerance when
juniSystemBootAutoRevertControl is set to set(2) in the sa… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.4874.2.2.2.1.1.12 |
| juniSystemBootReleaseFile The system-wide boot release file name, with extension '.rel'. On a
set operation, if there is no file found with the name specified, then
an error is returned. | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.2.1.1.13 |
| juniSystemBootBackupReleaseFile The system-wide backup boot release file name, with extension '.rel'.
A zero-length string indicates that there is no backup release file so
the primary release file (juniSystemBo… | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.2.1.1.15 |
| juniSystemBootBackupConfigFile The system-wide backup boot configuration file name, with extension
'.cnf'. The juniSystemBootBackupReleaseFile object, the
juniSystemBootBackupConfigControl object set to file(0… | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.2.1.1.16 |
| juniSystemRedundancyRevertControl Global control for reverting primary modules back from their active
redundant spare modules:
off - Disable global reverts of redundant modules.
immediate - All redun… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.1.17 |
| juniSystemRedundancyRevertTimeOfDay The number of seconds past midnight local time on any given day at
which time redundant slot reverts are allowed to occur. This object
must be set concurrently with juniSystemRev… | scalar | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.1.18 |
| juniSystemMemUtilTrapEnable Controls the sending of primary system processor memory utilization
events. Setting the value of this object to true(1) will cause system
memory utilization event notifications, … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.2.1.1.19 |
| juniSystemSwBuildDate Build date of currently executing system-wide operational software
version. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.2.1.1.2 |
| juniSystemReloadSlotNumber In a juniSystemReloadCommand notification, this object indicates the
number of the slot that is being reloaded. Note that slot numbers are
zero-based. | scalar | Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.1.20 |
| juniSystemUtilizationThresholdDirection The type of resource utilization notification being sent. See the
DESCRIPTIONs for the juniSystemUtilizationTable elements for details on
what conditions trigger a resource utili… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.1.21 |
| juniSystemUtilizationTrapEnable Controls the sending of system resource utilization threshold
notifications. Setting the value of this object to true(1) will allow
resource utilization threshold event notificat… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.2.1.1.22 |
| juniSystemMemKBytesCapacity The total memory capacity in kilo-bytes (1024 bytes) of the primary
system processor. | scalar | KBytes HOST-RESOURCES-MIBKBytes | .1.3.6.1.4.1.4874.2.2.2.1.1.23 |
| juniSystemPortSfpPowerThresholdIfIndex interface phy-uid. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.2.1.1.24 |
| juniSystemPortSfpPowerThresholdValue represents power tx/rx max/min threshold value of sfp. currently displays
1.0000 for trap raised, 0.0000 for trap cleared | scalar | OctetString | .1.3.6.1.4.1.4874.2.2.2.1.1.25 |
| juniSystemInterfaceName Displays the InterfaceName. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.2.1.1.26 |
| juniSystemUserName Displays the UserName. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.2.1.1.27 |
| juniSystemDefectiveSlotInformation Displays the Defective Slot Location. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4874.2.2.2.1.1.28 |
| juniSystemMemUtilPct Percentage of memory utilization on the primary system processor. A
value of -1 indicates the utilization is unknown. | scalar | percent Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.1.3 |
| juniSystemMemCapacity The total memory capacity in bytes of the primary system processor. If
the memory capacity is greater than 2147483647, a -1 value is returned,
and the actual memory capacity (in … | scalar | bytes Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.1.4 |
| juniSystemHighMemUtilThreshold The value of memory utilization in the primary system processor, where,
if reached for the first time after a high memory threshold reset, a
high memory utilization event notifica… | scalar | percent Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.1.5 |
| juniSystemAbatedMemUtilThreshold The value of memory utilization in the primary system processor that is
used to determine when to send an abated memory utilization event
notification to the management entity on … | scalar | percent Integer32 | .1.3.6.1.4.1.4874.2.2.2.1.1.6 |
| juniSystemBootConfigControl System boot configuration control:
file - On a system reboot use the configuration
settings specified by the
juniS… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.1.7 |
| juniSystemBootBackupConfigControl System boot backup configuration control is used to determine the
configuration to be used when the boot logic chooses backup mode:
file - On a system reboot in b… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.1.8 |
| juniSystemBootForceBackupControl System boot force backup control:
off - On the next system reboot do not force the boot logic to
choose backup mode.
on - On the next system reboot force the boot log… | scalar | Enumeration | .1.3.6.1.4.1.4874.2.2.2.1.1.9 |