Juniper-System-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

juniSystemSubsystemTable

table

.1.3.6.1.4.1.4874.2.2.2.1.2.1 · 1 row entry · 4 columns

Open in standard view

Table of subsystems.  A subsystem supports a 'family' of module types;
that is, each module type is supported by a particular software
subsystem.  For example, the ERX channelized T1 line card (CT1-FULL) is
supported by the 'ct1' subsystem.

juniSystemSubsystemEntry entry .1.3.6.1.4.1.4874.2.2.2.1.2.1.1

A table entry containing information pertaining to a subsystem.
Subsystem information takes precedence over system-wide information, but
not over individual module information.

Indexes

juniSystemSubsystemIndex

Column	Syntax	OID
juniSystemSubsystemIndex Arbitrary subsystem identification number.	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.1`
juniSystemSubsystemName The name of the subsystem.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.2`
juniSystemSubsystemBootReleaseFile The boot release file name for this subsystem, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes precedence over the system-wide boot release file (juniSystemBoo…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.3`
juniSystemSubsystemBootBackupReleaseFile The backup boot release file name for this subsystem, with extension '.rel'. If a file name is specified (a non-zero-length string), then this release file takes precedence over the system-wide boot backup release file…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.4874.2.2.2.1.2.1.1.4`

juniSystemSlotTable

table

.1.3.6.1.4.1.4874.2.2.2.1.3.3 · 1 row entry · 4 columns

Open in standard view

A table of system module slot physical container configuration
information.

juniSystemSlotEntry entry .1.3.6.1.4.1.4874.2.2.2.1.3.3.1

A table entry describing the physical status of a system module slot
container, which is designated by its slot and level positions. There
is an entry in this table for all index pairs from { 0, 1 } to the
maximum for …

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column Syntax OID

juniSystemSlotNumber

The slot number. The actual upper limit of valid values is
juniSystemMaxSlotNumber. Note that slot numbers are zero-based.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.1

juniSystemSlotLevel

The relative position of a module or sub-module 'container' within a
slot.

JuniSystemSlotLevel

Textual Convention: JuniSystemSlotLevel Integer32

Type Constraints:
range: 1..4

.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.2

juniSystemSlotStatus

The status of the module slot container.
unknown - The existence of a container cannot be
determined
noSlotContainer - The physical container does not exist
empty - No module …

Enumeration

Enumerated Values:

0	unknown
1	noSlotContainer
2	empty
3	moduleNotPresent
4	modulePresent

.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.3

juniSystemSlotType

The category of modules that can be configured for the container.

JuniSystemSlotType

Textual Convention: JuniSystemSlotType Enumeration

Type Values:

0	noSlot
1	erxSrpSlot
2	erxLcmSlot
3	erxSrpIoaSlot
4	erxLcIoaSlot
16	es2SrpSlot
17	es2SfsSlot
18	es2FmSlot
19	es2SrpIoaSlot
20	es2FIoaSlot

.1.3.6.1.4.1.4874.2.2.2.1.3.3.1.4

juniSystemModuleTable

table

.1.3.6.1.4.1.4874.2.2.2.1.3.4 · 1 row entry · 15 columns

Open in standard view

A table of system module and sub-module information. In this table, a
module refers to a physical module (board) or a sub-module.

A physical board may contain a single module or multiple sub-modules.
For example, an ERX line card is a single module and appears as single
entry in this table. An I/O adapter is a module that doesn't provide
any operaitonal state information and it also appears as a single entry
in this table. A second generation E-series SRP/SFS hardware module
contains two sub-modules, each with its own operational state
information: a System Resource Processor (SRP) sub-module and a Switch
Fabric Slice (SFS) sub-module, which appear as two separate entries in
this table, one for each sub-module.

juniSystemModuleEntry entry .1.3.6.1.4.1.4874.2.2.2.1.3.4.1

A table entry that provides information about a specific system module
or sub-module in a particular module location. There are only entries
in this table for module locations that report a juniSystemSlotStatus of
modu…

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column Syntax OID

juniSystemModuleOperStatus

The current operational status of the module (or sub-module):
unknown - The status of the module cannot be determined
notPresent - No hardware is currently present but there was a
module previou…

Enumeration

Enumerated Values:

0	unknown
1	notPresent
2	disabled
3	hardwareError
4	booting
5	initializing
6	online
7	standby
8	inactive
9	notResponding

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.1

juniSystemModuleDisableReason

Indicates the condition causing the module (or sub-module) to be
disabled:
none - Value when the module is not disabled
unknown - Unknown reason for disablement
assessing - The module cont…

Enumeration

Enumerated Values:

0	none
1	unknown
2	assessing
3	admin
4	typeMismatch
5	fabricLimit
6	imageError

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.2

juniSystemModuleLastChange

The value of sysUpTime when the value of juniSystemModuleOperStatus
last changed.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.3

juniSystemModuleCurrentType

The personality of this module based on the combination of modules that
are currently inserted in the slot. This could be different from the
personality reported in juniSystemModuleExpectedType, in which case it
may be…

JuniSystemModuleType

Textual Convention: JuniSystemModuleType Enumeration

Type Values:

0	unknown
1	erxSrp
2	erxCt3
3	erxOc3
4	erxUt3Atm
5	erxUt3Frame
6	erxUe3Atm
7	erxUe3Frame
8	erxCe1
9	erxCt1
10	erxDpfe
11	erxOc12Pos
12	erxOc12Atm
13	erxOc3Pos
14	erxOc3Atm
15	erxGe
16	erxFe8
17	erxOc3oc12Pos
18	erxOc3oc12Atm
19	erxCoc3oc12
20	erxCoc3
21	erxCoc12
22	erxOc12Server
23	erxHssi
24	erxGeFe
25	erxCt3P12
26	erxV35
27	erxUt3f12
28	erxUe3f12
29	erxCoc12F3
30	erxCoc3F3
31	erxCocxF3
32	erxVts
33	erxOc48
34	erxUt3Atm4
35	erxHybrid
36	erxOc3AtmGe
37	erxOc3AtmPos
38	erxGe2
39	erxGeHde
1024	erxSrpIoa
1025	erxCt1Ioa
1026	erxCe1Ioa
1027	erxCe1TIoa
1028	erxCt3Ioa
1029	erxE3Ioa
1030	erxOc3Mm2Ioa
1031	erxOc3Sm2Ioa
1032	erxOc3Mm4Ioa
1033	erxOc3SmIr4Ioa
1034	erxOc3SmLr4Ioa
1035	erxCOc3Mm4Ioa
1036	erxCOc3SmIr4Ioa
1037	erxCOc3SmLr4Ioa
1038	erxOc12Mm1Ioa
1039	erxOc12SmIr1Ioa
1040	erxOc12SmLr1Ioa
1041	erxCOc12Mm1Ioa
1042	erxCOc12SmIr1Ioa
1043	erxCOc12SmLr1Ioa
1044	erxFe2Ioa
1045	erxFe8Ioa
1046	erxGeMm1Ioa
1047	erxGeSm1Ioa
1048	erxHssiIoa
1049	erxCt3P12Ioa
1050	erxV35Ioa
1051	erxGeSfpIoa
1052	erxUe3P12Ioa
1053	erxT3Atm4Ioa
1054	erxCOc12Mm1ApsIoa
1055	erxCOc12SmIr1ApsIoa
1056	erxCOc12SmLr1ApsIoa
1057	erxOc12Mm1ApsIoa
1058	erxOc12SmIr1ApsIoa
1059	erxOc12SmLr1ApsIoa
1060	erxCOc12AtmPosMm1Ioa
1061	erxCOc12AtmPosSmIr1Ioa
1062	erxCOc12AtmPosSmLr1Ioa
1063	erxCOc12AtmPosMm1ApsIoa
1064	erxCOc12AtmPosSmIr1ApsIoa
1065	erxCOc12AtmPosSmLr1ApsIoa
1066	erxT1E1RedundantIoa
1067	erxT3E3RedundantIoa
1068	erxCt3RedundantIoa
1069	erxOcxRedundantIoa
1070	erxCOcxRedundantIoa
1071	erxOc3Mm4ApsIoa
1072	erxOc3SmIr4ApsIoa
1073	erxOc3SmLr4ApsIoa
1074	erxOc48Ioa
1075	erxOc3Atm2Ge1Ioa
1076	erxOc3Atm2Pos2Ioa
1077	erxGe2Ioa
1078	erxFe8FxIoa
1079	erxGe8Ioa
2048	e320Srp100
2049	e320Sfm100
2050	es2Lm4
2051	es2Lm10Uplink
2052	es2Lm10
2053	e320Srp320
2054	e320Sfm320
2055	es2Lm10s
3072	e320SrpIoa
3073	es2Ge4S1Ioa
3074	es2Oc48Stm16PosS1Ioa
3075	es2ServiceS1Ioa
3076	es2Oc3Stm1x8AtmS1Ioa
3077	es2RedundancyS1Ioa
3078	es2Oc12Stm4x2PosS1Ioa
3079	es2Oc12Stm4x2AtmS1Ioa
3080	es2dash10GeS1Ioa
3081	es2Ge8S1Ioa
3082	es2dash10GePrS2Ioa
3083	es2Ge20S2Ioa
4096	e120Srp120
4097	e120Sfm120

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.4

juniSystemModuleExpectedType

The personality for this module position based on the combination of
modules that were inserted in this slot when it was last configured.
The value of this object will be different than the value of
juniSystemModuleCurr…

JuniSystemModuleType

Textual Convention: JuniSystemModuleType Enumeration

Type Values:

0	unknown
1	erxSrp
2	erxCt3
3	erxOc3
4	erxUt3Atm
5	erxUt3Frame
6	erxUe3Atm
7	erxUe3Frame
8	erxCe1
9	erxCt1
10	erxDpfe
11	erxOc12Pos
12	erxOc12Atm
13	erxOc3Pos
14	erxOc3Atm
15	erxGe
16	erxFe8
17	erxOc3oc12Pos
18	erxOc3oc12Atm
19	erxCoc3oc12
20	erxCoc3
21	erxCoc12
22	erxOc12Server
23	erxHssi
24	erxGeFe
25	erxCt3P12
26	erxV35
27	erxUt3f12
28	erxUe3f12
29	erxCoc12F3
30	erxCoc3F3
31	erxCocxF3
32	erxVts
33	erxOc48
34	erxUt3Atm4
35	erxHybrid
36	erxOc3AtmGe
37	erxOc3AtmPos
38	erxGe2
39	erxGeHde
1024	erxSrpIoa
1025	erxCt1Ioa
1026	erxCe1Ioa
1027	erxCe1TIoa
1028	erxCt3Ioa
1029	erxE3Ioa
1030	erxOc3Mm2Ioa
1031	erxOc3Sm2Ioa
1032	erxOc3Mm4Ioa
1033	erxOc3SmIr4Ioa
1034	erxOc3SmLr4Ioa
1035	erxCOc3Mm4Ioa
1036	erxCOc3SmIr4Ioa
1037	erxCOc3SmLr4Ioa
1038	erxOc12Mm1Ioa
1039	erxOc12SmIr1Ioa
1040	erxOc12SmLr1Ioa
1041	erxCOc12Mm1Ioa
1042	erxCOc12SmIr1Ioa
1043	erxCOc12SmLr1Ioa
1044	erxFe2Ioa
1045	erxFe8Ioa
1046	erxGeMm1Ioa
1047	erxGeSm1Ioa
1048	erxHssiIoa
1049	erxCt3P12Ioa
1050	erxV35Ioa
1051	erxGeSfpIoa
1052	erxUe3P12Ioa
1053	erxT3Atm4Ioa
1054	erxCOc12Mm1ApsIoa
1055	erxCOc12SmIr1ApsIoa
1056	erxCOc12SmLr1ApsIoa
1057	erxOc12Mm1ApsIoa
1058	erxOc12SmIr1ApsIoa
1059	erxOc12SmLr1ApsIoa
1060	erxCOc12AtmPosMm1Ioa
1061	erxCOc12AtmPosSmIr1Ioa
1062	erxCOc12AtmPosSmLr1Ioa
1063	erxCOc12AtmPosMm1ApsIoa
1064	erxCOc12AtmPosSmIr1ApsIoa
1065	erxCOc12AtmPosSmLr1ApsIoa
1066	erxT1E1RedundantIoa
1067	erxT3E3RedundantIoa
1068	erxCt3RedundantIoa
1069	erxOcxRedundantIoa
1070	erxCOcxRedundantIoa
1071	erxOc3Mm4ApsIoa
1072	erxOc3SmIr4ApsIoa
1073	erxOc3SmLr4ApsIoa
1074	erxOc48Ioa
1075	erxOc3Atm2Ge1Ioa
1076	erxOc3Atm2Pos2Ioa
1077	erxGe2Ioa
1078	erxFe8FxIoa
1079	erxGe8Ioa
2048	e320Srp100
2049	e320Sfm100
2050	es2Lm4
2051	es2Lm10Uplink
2052	es2Lm10
2053	e320Srp320
2054	e320Sfm320
2055	es2Lm10s
3072	e320SrpIoa
3073	es2Ge4S1Ioa
3074	es2Oc48Stm16PosS1Ioa
3075	es2ServiceS1Ioa
3076	es2Oc3Stm1x8AtmS1Ioa
3077	es2RedundancyS1Ioa
3078	es2Oc12Stm4x2PosS1Ioa
3079	es2Oc12Stm4x2AtmS1Ioa
3080	es2dash10GeS1Ioa
3081	es2Ge8S1Ioa
3082	es2dash10GePrS2Ioa
3083	es2Ge20S2Ioa
4096	e120Srp120
4097	e120Sfm120

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.5

juniSystemModuleDescr

Textual description of the expected module in this slot.

OctetString

Constraints:
range: 0-63

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.6

juniSystemModuleSlotSpan

The number of slot positions that the expected module spans. Most
modules are only one slot wide, but some require extra space or
backplane resources. These modules are identified as being in the lower
numbered slot a…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.7

juniSystemModulePortCount

The number of physical ports supported by the expected module type in
this slot.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.8

juniSystemModuleSerialNumber

The serial number of the expected module in this slot. The serial
number of the current module may be found in this module's
entPhysicalSerialNum. A serial number is for a hardware board, so if
there is more than one …

OctetString

Constraints:
range: 0-10

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.9

juniSystemModuleAssemblyPartNumber

The part number of the expected module in this slot. The part number
of the current module may be found in this module's
entPhysicalModelName. A part number is for a hardware board, so if
there is more than one sub-mo…

OctetString

Constraints:
range: 0-10

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.10

juniSystemModuleAssemblyRev

The revision level of the expected module in this slot. The revision
level of the current module may be found in this module's
entPhysicalHardwareRev. A revision level is for a hardware board, so if
there is more than…

OctetString

Constraints:
range: 0-3

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.11

juniSystemModulePhysicalIndex

The entPhysicalIndex value assigned to the module. The
ENTITY-MIB.entPhysicalTable contains additional information about this
module that can be retrieved using this index. An entPhysicalIndex is
for a hardware board,…

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.12

juniSystemModuleSoftwareSupport

An indicator as to whether this module or sub-module has operational
state information that can be managed. If the value of this object is
true(1), then there is an entry for this module or sub-module in the
juniSystem…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.13

juniSystemModuleRedundancySupport

An indicator as to whether this module or sub-module is part of a
redundancy group. If the value of this object is true(1), then there is
an entry for this module or sub-module in the
juniSystemModuleRedundancyTable.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.14

juniSystemModuleLevelSpan

The number of level positions that the expected module spans. Most
modules are only one level 'high', but some require extra space or
backplane resources. These modules are identified as being in the lower
numbered le…

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.4874.2.2.2.1.3.4.1.15

juniSystemModuleSoftwareTable

table

.1.3.6.1.4.1.4874.2.2.2.1.3.5 · 1 row entry · 10 columns

Open in standard view

A table of system module software information.  This includes the
version of the software running on the particular module, the running
software's use of the modules resources and the modules operational
state.
          
Some module types don't contain loadable software (they execute
'firmware') but include support for some of the objects in this table.
For example, the E320 SFS (es2Sfs) modules only support
juniSystemModuleAdminStatus and juniSystemModuleControl.  Appropriate
'default' values are returned for the other objects.
          
Some module types don't contain any software related information (e.g.,
ERX I/O adapters do not) in which case their value of
juniSystemModuleSoftwareSupport will be false and there will not be a
corresponding entry in this table.

juniSystemModuleSoftwareEntry entry .1.3.6.1.4.1.4874.2.2.2.1.3.5.1

A table entry that provides software information about a specific
system module in a particular slot location.

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column Syntax OID

juniSystemModuleSoftwareVersion

Version identification of the currently executing operational software
on this module. If the module is in a state where the software version
is not known (e.g., module type mismatch), then the value of this object
wil…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.2

juniSystemModuleCpuUtilPct

Last available module CPU utilization percentage. A value of -1
indicates the utilization is unknown. This value is calculated over
a 5 second period.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.3

juniSystemModuleMemUtilPct

Percentage of module memory utilization. A value of -1 indicates the
utilization is unknown.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.4

juniSystemModuleAdminStatus

Provides administrative control to enable/disable the module. This
object is read-only for certain types of modules.

Juniper-TCJuniEnabler/w

Textual Convention: Juniper-TCJuniEnable Enumeration

Type Values:

0	disable
1	enable

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.5

juniSystemModuleControl

Administrative control of this slot:
noOperation - Setting this value has no effect.
flush - Flushes the configuration associated with a module
type that previously occupied this slot. Used to…

Enumerationr/w

Enumerated Values:

0	noOperation
1	flush
2	reset
3	resetBackup

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.6

juniSystemModuleBootReleaseFile

The boot release file name for this slot, with extension '.rel'. If a
file name is specified (not a zero-length string), then this release
file takes precedence over the subsystem boot release file
(juniSystemSubsystem…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.7

juniSystemModuleBootBackupReleaseFile

The backup boot release file name for this slot, with extension '.rel'.
If a file name is specified (a non-zero-length string), then this
release file takes precedence over the subsystem boot backup release
file (juniSy…

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.8

juniSystemModuleCpuFiveSecUtilPct

Percentage of average CPU utilization for the last five sec for this
module. A value of -1 indicates the utilization is unknown.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.9

juniSystemModuleCpuOneMinAvgPct

Percentage of average CPU utilization for the last one minute for this
module. A value of -1 indicates the utilization is unknown.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.10

juniSystemModuleCpuFiveMinAvgPct

Percentage of average CPU utilization for the last five minutes for
this module. A value of -1 indicates the utilization is unknown.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.4874.2.2.2.1.3.5.1.11

juniSystemModuleRedundancyTable

table

.1.3.6.1.4.1.4874.2.2.2.1.3.6 · 1 row entry · 6 columns

Open in standard view

A table of system module redundancy information.  Note that modules
that do not support redundancy information will not appear in this
table.

juniSystemModuleRedundancyEntry entry .1.3.6.1.4.1.4874.2.2.2.1.3.6.1

A table entry that provides information about a specific system module
in a particular slot location.

Indexes

juniSystemSlotNumber juniSystemSlotLevel

Column Syntax OID

juniSystemModuleRedundancyGroupId

Identifies the redundancy group as derived from hardware settings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.1

juniSystemModuleRedundancySpare

True only if this module is a spare redundant module.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.2

juniSystemModuleRedundancyAssociatedSlot

If this module is a primary redundant module, then the module at the
same slot level with the slot number identified by this variable is the
spare module that serves as this module's backup.

If this modul…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.3

juniSystemModuleRedundancyLockout

Provides administrative control to enable/disable redundancy protection
for the module in this slot.

Juniper-TCJuniEnabler/w

Textual Convention: Juniper-TCJuniEnable Enumeration

Type Values:

0	disable
1	enable

.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.4

juniSystemModuleRedundancyRevertControl

Per-module control for reverting a primary module back from its active
redundant spare module:
off - Disable reverting to the primary module.
immediate - Revert as soon as this primary module is re…

Enumerationr/w

Enumerated Values:

0	off
1	immediate
2	timeAndDate

.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.5

juniSystemModuleRedundancyRevertTime

The date and time associated with the timeAndDate (delayed) revert
operation. Only the local format for DateAndTime is supported. On a
set operation, if the time specified is prior to the current time, then
an inconsi…

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.4874.2.2.2.1.3.6.1.6

juniSystemPortTable

table

.1.3.6.1.4.1.4874.2.2.2.1.4.1 · 1 row entry · 3 columns

Open in standard view

Table of system physical I/O ports. The information in this table
reflects the ports for the expected module type in each slot; in event
of a module mismatch, this table permits navigation of the existing
configuration of the expected module type.

juniSystemPortEntry entry .1.3.6.1.4.1.4874.2.2.2.1.4.1.1

A table entry describing a physical port of the system.

Indexes

juniSystemSlotNumber juniSystemSlotLevel juniSystemPortNumber

Column	Syntax	OID
juniSystemPortNumber Port number of this physical port, relative to the slot in which it resides. Each physical port is uniquely distinguished by its slot number, slot level and port number. Port numbers are zero-based.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.4874.2.2.2.1.4.1.1.1`
juniSystemPortIfIndex The ifIndex of the Interfaces MIB ifTable entry corresponding to this physical port; if zero, the ifIndex is unknown or does not exist.	IF-MIBInterfaceIndexOrZero Textual Convention: IF-MIBInterfaceIndexOrZero `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.4.1.1.2`
juniSystemPortPhysicalIndex The entPhysicalIndex value assigned to this port. This index may be use to retrieve other information about the port, such as description and type, from the ENTITY-MIB.entPhysicalTable.	ENTITY-MIBPhysicalIndex Textual Convention: ENTITY-MIBPhysicalIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.4.1.1.3`

juniSystemTimingSelectorTable

table

.1.3.6.1.4.1.4874.2.2.2.1.5.4 · 1 row entry · 6 columns

Open in standard view

Table of system timing selectors.  This table only contains entries for
the primary, secondary and tertiary selecors.

juniSystemTimingSelectorEntry entry .1.3.6.1.4.1.4874.2.2.2.1.5.4.1

A table entry describing a system timing selector.

Indexes

juniSystemTimingSelectorIndex

Column Syntax OID

juniSystemTimingSelectorIndex

The system timing selector index associated with this entry. There are
valid indexes for selector types primary(1), secondary(2), tertiary(3).

JuniSystemTimingSelector

Textual Convention: JuniSystemTimingSelector Enumeration

Type Values:

1	primary
2	secondary
3	tertiary
4	error

.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.1

juniSystemTimingSourceType

The system timing source type for this entry. This object must be set
to timingInterfaceIfIndex(1) when setting the
juniSystemTimingSourceIfIndex object or timingLine(3) when setting the
juniSystemTimingSourceLine obje…

Enumerationr/w

Enumerated Values:

1	timingInterfaceIfIndex
2	timingInternal
3	timingLine

.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.2

juniSystemTimingSourceIfIndex

The ifIndex of the interface selected as the system timing source. If
the juniSystemTimingSourceType object is not timingInterfaceIfIndex(1),
then reading this object will return a zero value. The agent will not
accep…

IF-MIBInterfaceIndexOrZeror/w

Textual Convention: IF-MIBInterfaceIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.3

juniSystemTimingSourceLine

The line type timing source for this entry. If the
juniSystemTimingSourceType object is not timingLine(3), then reading
this object will return timingSourceLineUndefined(0). The agent will
not accept a set to this obj…

Enumerationr/w

Enumerated Values:

0	timingSourceLineUndefined
1	timingSourceLineE1PortA
2	timingSourceLineE1PortB
3	timingSourceLineT1PortA
4	timingSourceLineT1PortB

.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.4

juniSystemTimingWorkingStatus

The status associated with the working (normal) source of this system
timing working selector.

Enumeration

Enumerated Values:

1	timingStatusOk
2	timingStatusError
3	timingStatusUnknown

.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.5

juniSystemTimingProtectedStatus

The status associated with the protected (backup) source of this system
timing selector. If the system doesn't support protected timing
sources, then sourceNotProtected(4) will be returned.

Enumeration

Enumerated Values:

1	timingStatusOk
2	timingStatusError
3	timingStatusUnknown
4	sourceNotProtected

.1.3.6.1.4.1.4874.2.2.2.1.5.4.1.6

juniSystemNvsTable

table

.1.3.6.1.4.1.4874.2.2.2.1.7.2 · 1 row entry · 5 columns

Open in standard view

A table of NVS status information.

juniSystemNvsEntry entry .1.3.6.1.4.1.4874.2.2.2.1.7.2.1

A table entry that provides the status information for a NVS flash
card.

Indexes

juniSystemNvsIndex

Column Syntax OID

juniSystemNvsIndex

The index number of the NVS flash card. There is an entry in this
table for all values of this index in the range of 1 to the value of
juniSystemNvsCount.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.1

juniSystemNvsStatus

The status of non-volatile storage (NVS):
notPresent - The SRP or the flash card is not accessible.
writeProtected - NVS is write-protected.
volumeError - Status poll of NVS failed.
nearCapacity - U…

Enumeration

Enumerated Values:

0	notPresent
1	writeProtected
2	volumeError
3	nearCapacity
4	ok
5	noConfigSpace

.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.2

juniSystemNvsCapacity

The capacity of NVS storage in megabytes.

megabytesSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.3

juniSystemNvsUtilPct

The percentage of NVS storage used. A value of -1 indicates NVS
utilization is unknown.

percentInteger32

Constraints:
range: -1-100

.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.4

juniSystemNvsPhysicalIndex

The entPhysicalIndex value assigned to this NVS flash card. This index
may be use to retrieve other information about the NVS flash card, such
as description and type, from the ENTITY-MIB.entPhysicalTable.

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.7.2.1.5

juniSystemPowerTable

table

.1.3.6.1.4.1.4874.2.2.2.1.8.2 · 1 row entry · 3 columns

Open in standard view

A table of status variables for the system power elements.

juniSystemPowerEntry entry .1.3.6.1.4.1.4874.2.2.2.1.8.2.1

A table entry describing status of a system power element.

Indexes

juniSystemPowerIndex

Column Syntax OID

juniSystemPowerIndex

The index number of the power element. There is an entry in this table
for all values of this index in the range of 1 to the value of
juniSystemPowerCount.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.4874.2.2.2.1.8.2.1.1

juniSystemPowerStatus

The status of the power element:
notPresent - The power element is removed from the chassis.
inactive - No power is available from this element.
good - Power is available from this element.
failed …

Enumeration

Enumerated Values:

0	notPresent
1	inactive
2	good
3	failed
4	sensorFailed
5	unknown

.1.3.6.1.4.1.4874.2.2.2.1.8.2.1.2

juniSystemPowerPhysicalIndex

The entPhysicalIndex value assigned to this power element. This index
may be use to retrieve other information about the power element, such
as description and type, from the ENTITY-MIB.entPhysicalTable.

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.8.2.1.3

juniSystemFanTable

table

.1.3.6.1.4.1.4874.2.2.2.1.9.2 · 1 row entry · 3 columns

Open in standard view

A table of status of the system's fan subsystems.

juniSystemFanEntry entry .1.3.6.1.4.1.4874.2.2.2.1.9.2.1

A table entry describing status of a fan subsystem.

Indexes

juniSystemFanIndex

Column Syntax OID

juniSystemFanIndex

The index number of the fan subsystem. This is a number in the range
of 1 to the value of juniSystemFanCount.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.4874.2.2.2.1.9.2.1.1

juniSystemFanStatus

Status of fan subsystem.
failed - The fan subsystem has a critical failure, or has been
removed, and is now non-operational.
ok - All components are operational.
warning - The fan subsystem has a…

Enumeration

Enumerated Values:

0	failed
1	ok
2	warning

.1.3.6.1.4.1.4874.2.2.2.1.9.2.1.2

juniSystemFanPhysicalIndex

The entPhysicalIndex value assigned to this fan subsystem. This index
may be use to retrieve other information about the fan subsystem, such
as description and type, from the ENTITY-MIB.entPhysicalTable.

ENTITY-MIBPhysicalIndex

Textual Convention: ENTITY-MIBPhysicalIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.9.2.1.3

juniSystemTempTable

table

.1.3.6.1.4.1.4874.2.2.2.1.9.4 · 1 row entry · 4 columns

Open in standard view

A table of status of the system's temperature sensors.

juniSystemTempEntry entry .1.3.6.1.4.1.4874.2.2.2.1.9.4.1

A table entry describing status of a temperature sensor. Sensors are
located throughout the system. The ENTITY_MIB.entPhysicalTable provides
detailed information about the location of each sensor. The index for a
tab…

Indexes

juniSystemTempIndex

Column Syntax OID

juniSystemTempIndex

An arbitrary number to uniquely identify the temperature sensor.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.1

juniSystemTempStatus

The status of a temperature sensor:
unknown - sensor is not present or is not accessible
failed - sensor is broken
tooLow - temperature is below nominal range
nominal - temperat…

Enumeration

Enumerated Values:

0	unknown
1	failed
2	tooLow
3	nominal
4	increasedFanSpeed
5	tooHigh
6	tooLowWarning
7	tooHighWarning

.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.2

juniSystemTempValue

The temperature measured by this sensor in degrees Celsius. This
measurement is valid only if the value of the corresponding
juniSystemTempStatus is tooLow, nominal or tooHigh.

degrees CelsiusSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.3

juniSystemTempPhysicalIndex

The entPhysicalIndex value assigned to this temperature sensor. If the
temperature sensor is not present this object will return a value of 0.
For non-zero values this index may be used to retrieve other information
ab…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.4874.2.2.2.1.9.4.1.4

juniSystemUtilizationTable

table

.1.3.6.1.4.1.4874.2.2.2.1.10.1 · 1 row entry · 9 columns

Open in standard view

A table of status of the utilization of system resources. It is an
implementation option as to which resources (if any) are supported in
this table. It is also an implementation option as to whether the
threshold objects are supported for a particular instance.

juniSystemUtilizationEntry entry .1.3.6.1.4.1.4874.2.2.2.1.10.1.1

A table entry describing the status of the utilization of a system
resource.

Indexes

juniSystemUtilizationResourceType juniSystemUtilizationResourceSubType juniSystemUtilizationLocationType juniSystemUtilizationLocation

Column Syntax OID

juniSystemUtilizationResourceType

This index identifies a type of enumerated value that is used for the
juniSystemUtilizationResourceSubType. See the DESCRIPTION for
juniSystemUtilizationResourceSubType for the mapping of Type to SubType
enumeration an…

Enumeration

Enumerated Values:

1	interface
2	memory

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.1

juniSystemUtilizationResourceSubType

This index uses an enumerated value that is different for each value of
juniSystemUtilizationResourceType. The following table shows the
mapping of Type to SubType enumeration and the corresponding units of
measure use…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.2

juniSystemUtilizationLocationType

This index element identifies the format of the location information so
that the juniSystemUtilizationLocation index element can be properly
interpreted.

JuniSystemLocationType

Textual Convention: JuniSystemLocationType Enumeration

Type Values:

1	system
2	slot

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.3

juniSystemUtilizationLocation

This index is used to specify the resource instance based on its
location. Its value is interpreted based on the location type
identified by the juniSystemUtilizationLocationType index element.

JuniSystemLocation

Textual Convention: JuniSystemLocation OctetString

Type Constraints:
range: 0..16

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.4

juniSystemUtilizationMaxCapacity

The maximum number of units of the resource the system can support.

See the DESCRIPTION of juniSystemUtilizationResourceSubType for what
constitutes a unit of value for this object.

Note th…

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.5

juniSystemUtilizationCurrentValue

The current number of units of the resource in the system.

See the DESCRIPTION for juniSystemUtilizationResourceSubType for what
constitutes a unit of value for this object.

Note that some …

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.6

juniSystemUtilizationThresholdRising

The threshold value (risingVal), which, in conjunction with
juniSystemUtilizationHoldDownTime (holdTime) and
juniSystemUtilizationThresholdFalling (fallingVal), is used to decide
when to trigger an event indicating that…

SNMPv2-SMIGauge32r/w

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.7

juniSystemUtilizationThresholdFalling

The threshold value (fallingVal), which, in conjunction with
juniSystemUtilizationHoldDownTime (holdTime) and
juniSystemUtilizationThresholdRising (risingVal), is used to decide when
to trigger an event indicating that …

SNMPv2-SMIGauge32r/w

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.8

juniSystemUtilizationHoldDownTime

The hold-down time (holdTime) used in conjunction with
juniSystemUtilizationThresholdRising (risingVal) and
juniSystemUtilizationThresholdFalling (fallingVal) to decide when to
trigger an event indicating that the resou…

secondsSNMPv2-SMIGauge32r/w

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.4874.2.2.2.1.10.1.1.9

juniSystemCpuUtilizationTable

table

.1.3.6.1.4.1.4874.2.2.2.1.10.2 · 1 row entry · 11 columns

Open in standard view

A table of status of the cpu utilization by various tasks.

juniSystemCpuUtilizationEntry entry .1.3.6.1.4.1.4874.2.2.2.1.10.2.1

A table entry describing cpu utilization of a particular task.

Indexes

juniSystemCpuUtilizationTimeMark juniSystemCpuUtilizationTaskName

Column	Syntax	OID
juniSystemCpuUtilizationTimeMark A TimeFilter for this task profile entry. Allows GetNext and GetBulk to find task profile rows which have changed since a specified value of sysUptime.	Juniper-TCJuniTimeFilter Textual Convention: Juniper-TCJuniTimeFilter `Unsigned32`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.1`
juniSystemCpuUtilizationTaskName Task name associated with this task profile entry.	JuniSystemTaskName Textual Convention: JuniSystemTaskName `OctetString` Type Constraints: `range: 1..100`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.2`
juniSystemCpuUtilizationInvoked Number of times task associated with this task profile entry being invoked.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.3`
juniSystemCpuUtilizationInvokationPerSec Rate of invokation for the task associated with this task profile entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.4`
juniSystemCpuUtilizationTotalRunningTime Total running time for the task associated with this task profile entry.	milli SecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.5`
juniSystemCpuUtilizationPercentageRunningTime Percentage running time for the task associated with this task profile entry.	percentInteger32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.6`
juniSystemCpuUtilizationAverageTimePerInvokation Average running time per invokation for the task associated with this task profile entry.	micro SecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.7`
juniSystemCpuUtilizationFiveSecondUtilization Utilization in terms of percentage during the five seconds measurement interval for the task associated with this task profile entry.	percentInteger32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.8`
juniSystemCpuUtilizationOneMinuteUtilization Utilization in terms of percentage during the one minute measurement interval for the task associated with this task profile entry.	percentInteger32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.9`
juniSystemCpuUtilizationFiveMinuteUtilization Utilization in terms of percentage during the five minutes measurement interval for the task associated with this task profile entry.	percentInteger32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.10`
juniSystemCpuUtilizationNumberOfInstances Number of instances consolidated for CPU utilization calculation in this task profile entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4874.2.2.2.1.10.2.1.11`

juniSystemIssuCriteriaTable

table

.1.3.6.1.4.1.4874.2.2.2.1.11.5 · 1 row entry · 3 columns

Open in standard view

A Table of criteria for an ISSU initialization.
          
This table will be empty for unsupported platforms. These objects
are supported on the second generation E-series platform
family (E320 & E120) in JUNOSe 9.0 and subsequent system releases.
This object is also supported on ERX-1440 in JUNOSe 9.2 and
subsequent system releases.

juniSystemIssuCriteriaEntry entry .1.3.6.1.4.1.4874.2.2.2.1.11.5.1

A table entry describing the criteria for an ISSU initialization.

Indexes

juniSystemIssuCriteriaIndex

Column Syntax OID

juniSystemIssuCriteriaIndex

The index associated with an entry of the system ISSU Criteria Table.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.4874.2.2.2.1.11.5.1.1

juniSystemIssuCriteriaDescription

To initialize ISSU, few criteria need to be met. If these criteria
were not met, ISSU cannot be initialized. This object provides the
criteria details.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.4874.2.2.2.1.11.5.1.2

juniSystemIssuCriteriaStatus

To initialize ISSU, few criteria need to be met. If these criteria
were not met, ISSU cannot be initialized. This object indicates
whether a criteria has met. It will be conditional when that the
user can choose to acce…

Enumeration

Enumerated Values:

1	yes
2	no
3	conditional

.1.3.6.1.4.1.4874.2.2.2.1.11.5.1.3