icfVgPortType
ICF-VG-RPTR ·
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3
Object
column
Enumeration
Describes the type of port. One of the following:
cascadeExternal - Port is an uplink with physical
connections which are
externally visible
cascadeInternal - Port is an uplink with physical
connections which are not
externally visible, such as a
connection to an internal
backplane in a chassis
localExternal - Port is a downlink or local
port with externally visible
connections
localInternal - Port is a downlink or local
port with connections which are
not externally visible, such as
a connection to an internal
agent
'internal' is used to identify ports which place
traffic into the repeater, but do not have any
external connections. Note that both DTE and
cascaded repeater downlinks are considered 'local'
ports.
Context
- MIB
- ICF-VG-RPTR
- OID
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- icfVgBasicPortEntry
- Table
- icfVgBasicPortTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | cascadeExternal |
2 | cascadeInternal |
3 | localExternal |
4 | localInternal |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| icfVgPortGroupIndex This object identifies the group containing the port
for which this entry contains information. | column | Integer32 | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.1 |
| icfVgPortTrainingResult This 18 bit field is used to indicate the result of
training. It contains two bits which indicate if
error-free training frames have been received, and it
also contains the 16 bi… | column | OctetString | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10 |
| icfVgPortPriorityEnable A configuration flag used to determine whether the
repeater will service high priority requests received
on the port as high priority or normal priority.
When 'false', high priori… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.11 |
| icfVgPortMediaType The type of physical media in use. One of the
following values:
other undefined
unknown true state not known
pmdMissing PMD device … | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.12 |
| icfVgPortIndex This object identifies the port within the group for
which this entry contains information. This value
can never be greater than icfVgGroupPortCapacity for
the associated group. | column | Integer32 | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.2 |
| icfVgPortAdminStatus Port enable/disable function. Enabling a disabled
port will cause training to be initiated. Setting
this object to disabled(2) disables the port. A
disabled port neither transm… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.4 |
| icfVgPortStatus Current status for the port as specified by the
PORT_META_STATE in the port process module of clause
12 [IEEE Draft Std 802.12].
During initialization or any link w… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5 |
| icfVgPortSupportedPromiscMode This object describes whether the port hardware is
capable of supporting promiscuous mode, single
address mode (i.e., repeater filters unicasts not
addressed to the end station at… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.6 |
| icfVgPortSupportedCascadeMode This object describes whether the port hardware is
capable of supporting cascaded repeaters, end nodes,
or both. A port for which icfVgPortType is equal to
'cascadeInternal' or '… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.7 |
| icfVgPortAllowedTrainType This security object is set by the network manager
to configure what type of device is permitted to
connect to the port. One of the following values:
allowEndN… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.8 |
| icfVgPortLastTrainConfig This 16 bit field contains the most recent training
configuration in an error-free training frame
sent by the end node connected to the port. For
cascade ports, this is the respo… | column | OctetString | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9 |