icfVgPortLastTrainConfig
ICF-VG-RPTR ·
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9
Object
column
OctetString
This 16 bit field contains the most recent training
configuration in an error-free training frame
sent by the end node connected to the port. For
cascade ports, this is the responder's configuration
field from the most recent error-free training
response frame received in response to training
initiated by this repeater. This object is formatted
as follows:
First Octet: Second Octet:
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+
|v|v|v|0|0|0|0|0| |0|0|0|F|F|P|P|R|
+-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+
vvv: The version of the 802.12 training protocol
with which the training initiator is
compliant
FF: 00 = frameType88023 is requested
01 = frameType88025 is requested
10 = reserved
11 = either frameType88023 or frameType88025
is acceptable
PP: 00 = request singleAddressMode
01 = request promiscuousMode
10 = reserved
11 = reserved
R: 0 = request is from an end node
1 = request is from a repeater
Context
- MIB
- ICF-VG-RPTR
- OID
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- icfVgBasicPortEntry
- Table
- icfVgBasicPortTable
- Siblings
- 11
Syntax
OctetString
Values & Constraints
Object Constraints
range: 2-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| icfVgPortGroupIndex This object identifies the group containing the port
for which this entry contains information. | column | Integer32 | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.1 |
| icfVgPortTrainingResult This 18 bit field is used to indicate the result of
training. It contains two bits which indicate if
error-free training frames have been received, and it
also contains the 16 bi… | column | OctetString | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10 |
| icfVgPortPriorityEnable A configuration flag used to determine whether the
repeater will service high priority requests received
on the port as high priority or normal priority.
When 'false', high priori… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.11 |
| icfVgPortMediaType The type of physical media in use. One of the
following values:
other undefined
unknown true state not known
pmdMissing PMD device … | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.12 |
| icfVgPortIndex This object identifies the port within the group for
which this entry contains information. This value
can never be greater than icfVgGroupPortCapacity for
the associated group. | column | Integer32 | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.2 |
| icfVgPortType Describes the type of port. One of the following:
cascadeExternal - Port is an uplink with physical
connections which are
exte… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3 |
| icfVgPortAdminStatus Port enable/disable function. Enabling a disabled
port will cause training to be initiated. Setting
this object to disabled(2) disables the port. A
disabled port neither transm… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.4 |
| icfVgPortStatus Current status for the port as specified by the
PORT_META_STATE in the port process module of clause
12 [IEEE Draft Std 802.12].
During initialization or any link w… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5 |
| icfVgPortSupportedPromiscMode This object describes whether the port hardware is
capable of supporting promiscuous mode, single
address mode (i.e., repeater filters unicasts not
addressed to the end station at… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.6 |
| icfVgPortSupportedCascadeMode This object describes whether the port hardware is
capable of supporting cascaded repeaters, end nodes,
or both. A port for which icfVgPortType is equal to
'cascadeInternal' or '… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.7 |
| icfVgPortAllowedTrainType This security object is set by the network manager
to configure what type of device is permitted to
connect to the port. One of the following values:
allowEndN… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.8 |