icfVgPortStatus
ICF-VG-RPTR ·
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5
Object
column
Enumeration
Current status for the port as specified by the
PORT_META_STATE in the port process module of clause
12 [IEEE Draft Std 802.12].
During initialization or any link warning conditions,
icfVgPortStatus will be 'inactive(2)'.
When Training_Up is received by the repeater on a
local port (or when Training_Down is received on
a cascade port), icfVgPortStatus will change to
'training(3)' and icfVgTrainingResult can be
monitored to see the detailed status regarding
training.
When 24 consecutive good FCS packets are received and
the configuration bits are OK, icfVgPortStatus will
change to 'active(1)'.
A disabled port shall have a port status of
'inactive(2)'.
Context
- MIB
- ICF-VG-RPTR
- OID
.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- icfVgBasicPortEntry
- Table
- icfVgBasicPortTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | active |
2 | inactive |
3 | training |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| icfVgPortGroupIndex This object identifies the group containing the port
for which this entry contains information. | column | Integer32 | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.1 |
| icfVgPortTrainingResult This 18 bit field is used to indicate the result of
training. It contains two bits which indicate if
error-free training frames have been received, and it
also contains the 16 bi… | column | OctetString | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10 |
| icfVgPortPriorityEnable A configuration flag used to determine whether the
repeater will service high priority requests received
on the port as high priority or normal priority.
When 'false', high priori… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.11 |
| icfVgPortMediaType The type of physical media in use. One of the
following values:
other undefined
unknown true state not known
pmdMissing PMD device … | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.12 |
| icfVgPortIndex This object identifies the port within the group for
which this entry contains information. This value
can never be greater than icfVgGroupPortCapacity for
the associated group. | column | Integer32 | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.2 |
| icfVgPortType Describes the type of port. One of the following:
cascadeExternal - Port is an uplink with physical
connections which are
exte… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.3 |
| icfVgPortAdminStatus Port enable/disable function. Enabling a disabled
port will cause training to be initiated. Setting
this object to disabled(2) disables the port. A
disabled port neither transm… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.4 |
| icfVgPortSupportedPromiscMode This object describes whether the port hardware is
capable of supporting promiscuous mode, single
address mode (i.e., repeater filters unicasts not
addressed to the end station at… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.6 |
| icfVgPortSupportedCascadeMode This object describes whether the port hardware is
capable of supporting cascaded repeaters, end nodes,
or both. A port for which icfVgPortType is equal to
'cascadeInternal' or '… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.7 |
| icfVgPortAllowedTrainType This security object is set by the network manager
to configure what type of device is permitted to
connect to the port. One of the following values:
allowEndN… | column | Enumeration | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.8 |
| icfVgPortLastTrainConfig This 16 bit field contains the most recent training
configuration in an error-free training frame
sent by the end node connected to the port. For
cascade ports, this is the respo… | column | OctetString | .1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.9 |