icfVgPortTrainingResult

This 18 bit field is used to indicate the result of
training.  It contains two bits which indicate if
error-free training frames have been received, and it
also contains the 16 bits of the most recent valid
training response frame on the port.
              
First Octet:       Second Octet:      Third Octet:
              
7 6 5 4 3 2 1 0    7 6 5 4 3 2 1 0    7 6 5 4 3 2 1 0
+-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+
|0|0|0|0|0|0|V|G|  |v|v|v|D|C|N|0|0|  |0|0|0|F|F|P|P|R|
+-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+  +-+-+-+-+-+-+-+-+
              
    V:   Valid: set when at least one error-free
         training frame has been received.  Indicates
         the 16 training configuration bits in
         icfVgPortLastTrainConfig and
         icfVgPortTrainingResult contain valid
         information.  This bit is cleared when
         icfVgPortStatus transitions to the 
         'inactive' or 'training' state.
    G:   LinkGood: indicates the link hardware is OK.
         Set if 24 consecutive error-free training
         packets have been received.  Cleared when a
         training packet with errors is received, and
         when icfVgPortStatus transitions to the
         'inactive' or 'training' state.
    vvv: The version of the 802.12 training protocol
         with which the training responder is
         compliant
    D:   0  = no duplicate address has been detected
         1  = duplicate address has been detected
    C:   0  = the requested configuration is
              compatible with the port
         1  = the requested configuration is not
              compatible with the port.  The FF, PP
              and R bits indicate the configuration
              which would be allowed (providing 
              N = 0).
    N:   0  = access will be allowed, providing the
              configuration is compatible (C = 0).
         1  = access not allowed because of security
              restrictions
    FF:  00 = frameType88023 will be used
         01 = frameType88025 will be used
         10 = reserved
         11 = reserved
    PP:  00 = singleAddressMode will be used
         01 = promiscuousMode will be used
         10 = reserved
         11 = reserved
    R:   0  = requested access as an end node is
              allowed
         1  = requested access as a repeater is
              allowed
              
If the port is in training, a management station can
examine this object to see if any training packets
have been passed successfully.  If there have been
any good training packets, the Valid bit will be set
and the management station can examine the 16
training response bits to see if there is a duplicate
address, configuration, or security problem.
              
Note that on a repeater local port, this repeater
generates the training response bits, while on the
cascade port, the higher level repeater originated
the training response bits.

MIB

ICF-VG-RPTR

OID

.1.3.6.1.4.1.11.2.14.8.1.1.3.1.1.10

Type

column

Access

readonly

Status

current

Parent

icfVgBasicPortEntry

Table

icfVgBasicPortTable

Siblings

11