fsMplsPsWorkLspId
FS-MPLSOAM-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.5
Object
column
Integer32
The ID of work-lsp(or work-tunnel).
Context
- MIB
- FS-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMplsPsEntry
- Table
- fsMplsPsTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsPsIndex This is a unique index in the protection group table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.1 |
| fsMplsPsHoldOff In general, if lower layer(e.g., SDH or optical) protection
mechanisms are being utilized in conjunction with MPLS layer
protection mechanisms, then the lower layers should have a… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.10 |
| fsMplsPsSwitchCondition The following switch initiation criteria exist:
1. an externally initiated command(clear, lockout of protection,
forced switch, manual switch);
2. an automatically initiated c… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.11 |
| fsMplsPsWorkLspState The state of working lsp state lists below:
1: defect state;
2: non-defect state. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.12 |
| fsMplsPsProtLspState The state of protection lsp state lists below:
1: defect state;
2: non-defect state. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.13 |
| fsMplsPsSwitchResult Which lsp is user traffic being transmitted:
1: working-lsp;
2: protection-lsp. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.14 |
| fsMplsPsRowStatus It is used to create and
delete a row in this table.
1: active;
2: notInService;
3: notReady;
4: createAndGo;
5: createAndWait;
6: destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.15 |
| fsMplsPsGroupName The protection group name. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.2 |
| fsMplsPsType The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type,
or a packet 1+1 type.
1. In the 1+1 architecture type, a protection LSP is dedicated to each working
… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.3 |
| fsMplsPsWorkLspName The name of work-lsp(or work-tunnel). | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.4 |
| fsMplsPsProtectLspName The name of protect-lsp. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.6 |
| fsMplsPsProtectLspId The ID of protect-lsp(or protect-tunnel). | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.7 |
| fsMplsPsRevertiveMode The protection group revertive mode can be non-revertive and revertive
protection switching.
1. In revertive mode of operation, under conditions where working traffic
is being … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.8 |
| fsMplsPsWTR Wait to restore is only applicable for the revertive mode and
applies to a working LSP. It prevents reversion back to select
the working LSP until the wait to restore timer has ex… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.9 |