fsMplsPsRowStatus

FS-MPLSOAM-MIB · .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.15

MIB view Table view

Object

column SNMPv2-TCRowStatus

It is used to create and
delete a row in this table.
1: active;
2: notInService;
3: notReady;
4: createAndGo;
5: createAndWait;
6: destroy.

Context

MIB: FS-MPLSOAM-MIB
OID: .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.15
Type: column
Access: readonly
Status: current
Parent: fsMplsPsEntry
Table: fsMplsPsTable
Siblings: 14

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsMplsPsIndex This is a unique index in the protection group table.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.1`
fsMplsPsHoldOff In general, if lower layer(e.g., SDH or optical) protection mechanisms are being utilized in conjunction with MPLS layer protection mechanisms, then the lower layers should have a…	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.10`
fsMplsPsSwitchCondition The following switch initiation criteria exist: 1. an externally initiated command(clear, lockout of protection, forced switch, manual switch); 2. an automatically initiated c…	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.11`
fsMplsPsWorkLspState The state of working lsp state lists below: 1: defect state; 2: non-defect state.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.12`
fsMplsPsProtLspState The state of protection lsp state lists below: 1: defect state; 2: non-defect state.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.13`
fsMplsPsSwitchResult Which lsp is user traffic being transmitted: 1: working-lsp; 2: protection-lsp.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.14`
fsMplsPsGroupName The protection group name.	column	OctetString	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.2`
fsMplsPsType The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type, or a packet 1+1 type. 1. In the 1+1 architecture type, a protection LSP is dedicated to each working …	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.3`
fsMplsPsWorkLspName The name of work-lsp(or work-tunnel).	column	OctetString	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.4`
fsMplsPsWorkLspId The ID of work-lsp(or work-tunnel).	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.5`
fsMplsPsProtectLspName The name of protect-lsp.	column	OctetString	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.6`
fsMplsPsProtectLspId The ID of protect-lsp(or protect-tunnel).	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.7`
fsMplsPsRevertiveMode The protection group revertive mode can be non-revertive and revertive protection switching. 1. In revertive mode of operation, under conditions where working traffic is being …	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.8`
fsMplsPsWTR Wait to restore is only applicable for the revertive mode and applies to a working LSP. It prevents reversion back to select the working LSP until the wait to restore timer has ex…	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.9`