fsMplsPsRevertiveMode
FS-MPLSOAM-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.8
Object
column
Integer32
The protection group revertive mode can be non-revertive and revertive protection switching. 1. In revertive mode of operation, under conditions where working traffic is being transmitted via the protection LSP and when the working LSP is restored, if local protection switching requests have been previously active and now become inactive, a local wait to restore state is entered. 2. When the failed LSP is no longer in an SF condition, and no other externally initiated commands are present, a no request state is entered. During this state, switching does not occur. 1: revertive; 2: non-revertive.
Context
- MIB
- FS-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMplsPsEntry
- Table
- fsMplsPsTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsPsIndex This is a unique index in the protection group table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.1 |
| fsMplsPsHoldOff In general, if lower layer(e.g., SDH or optical) protection
mechanisms are being utilized in conjunction with MPLS layer
protection mechanisms, then the lower layers should have a… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.10 |
| fsMplsPsSwitchCondition The following switch initiation criteria exist:
1. an externally initiated command(clear, lockout of protection,
forced switch, manual switch);
2. an automatically initiated c… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.11 |
| fsMplsPsWorkLspState The state of working lsp state lists below:
1: defect state;
2: non-defect state. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.12 |
| fsMplsPsProtLspState The state of protection lsp state lists below:
1: defect state;
2: non-defect state. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.13 |
| fsMplsPsSwitchResult Which lsp is user traffic being transmitted:
1: working-lsp;
2: protection-lsp. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.14 |
| fsMplsPsRowStatus It is used to create and
delete a row in this table.
1: active;
2: notInService;
3: notReady;
4: createAndGo;
5: createAndWait;
6: destroy. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.15 |
| fsMplsPsGroupName The protection group name. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.2 |
| fsMplsPsType The MPLS PS architecture can be a 1+1 type, a 1:1 type, a shared mesh type,
or a packet 1+1 type.
1. In the 1+1 architecture type, a protection LSP is dedicated to each working
… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.3 |
| fsMplsPsWorkLspName The name of work-lsp(or work-tunnel). | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.4 |
| fsMplsPsWorkLspId The ID of work-lsp(or work-tunnel). | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.5 |
| fsMplsPsProtectLspName The name of protect-lsp. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.6 |
| fsMplsPsProtectLspId The ID of protect-lsp(or protect-tunnel). | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.7 |
| fsMplsPsWTR Wait to restore is only applicable for the revertive mode and
applies to a working LSP. It prevents reversion back to select
the working LSP until the wait to restore timer has ex… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.93.1.3.1.1.9 |